1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612SYKCGKC-F01 Super Bright Yellow Green Features Description z 1.6mmx1.25mm SMT LED, 0.65mm thickness. The Super Bright Yellow device is made with AlGaInP (on z Bi-color, low power consumption. GaAs substrate) light emitting diode chip. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069 Selection Guide Part No. Dice Lens Type Super Bright Yellow (AlGaInP) APTB1612SYKCGKC-F01 Min. Typ. 80 120 20 50 Water Clear Green (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 574 nm IF=20mA Super Bright Yellow Green 590 570 nm IF=20mA Spectral Line Half-width Super Bright Yellow Green 20 20 nm IF=20mA C Capacitance Super Bright Yellow Green 20 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow Green 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current Super Bright Yellow Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 175 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069 APTB1612SYKCGKC-F01 Super Bright Yellow SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069 Green SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069 APTB1612SYKCGKC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069 PACKING & LABEL SPECIFICATIONS APTB1612SYKCGKC-F01 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF1100 REV NO: V.7B DATE: MAR/16/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002069