Magnecraft & Struthers-Dunn Dry Reed Relays Dry Reed Relays c Manufactured Under QS 9000 and ISO 9001 107, 171 and 172 DIP Dry Reed Relays Contact Resistance: 200 milliohms typical. Insulation Resistance: 1010 ohms at 100 VDC minimum. Dielectric Withstanding Voltage: Between contacts N 200 VDC; Between coil and contacts N 1000 VDC. Shock, Non-Operational: 100 Gs. 11 mS @ 1/2 sine wave. Vibration: 20 Gs, 0-5000 Hz operating. Ambient Temperature: 15C to 85C. Specifications 4 Max. Switching Rating Type Volt Amperes Voltage DC Current Max. Carry Current 10 10 10 4 10 100 100 100 100 100 0.50 0.50 0.50 0.25 0.50 1.5 1.5 1.5 0.5 1.0 SPST-NO SPST-NC DPST-NO SPDT DPDT Class 107DIP, SPST-NO, 0.5 Amp Stock No. 850-1550 850-1551 850-1640 850-1554 850-1642 850-1643 Type Fig. W107DIP-1 W107DIP-3 W107DIP-4 W107DIP-5 W107DIP-7 W107DIP-8 1 1 1 2 2 2 Coil EACH Volts Ohms 1-9 5 12 24 5 12 24 500 1200 2200 500 1200 2200 10-24 25-49 50-99 3.83 3.83 4.33 4.33 4.33 4.86 3.54 3.54 3.84 3.84 3.84 4.32 3.24 3.24 3.52 3.52 3.52 3.96 2.99 2.99 3.25 3.25 3.25 3.66 Class 171DIP, SPST-NO, 0.5 Amp (No Connection pin 9 and 13) 850-1602 850-1604 850-1605 850-1607 850-1701 850-1702 W171DIP-2 W171DIP-4 W171DIP-5 W171DIP-7 W171DIP-9 W171DIP-10 3 3 3 4 4 4 5 12 24 5 12 24 500 1200 2200 500 1200 2200 3.94 3.94 4.32 4.32 4.32 5.53 3.51 3.51 3.84 3.84 3.84 4.90 3.21 3.21 3.52 3.52 3.52 4.49 2.97 2.97 3.25 3.25 3.25 4.14 5 5 5 6 6 6 5 12 24 5 12 24 500 1200 2200 500 1200 2200 6.09 6.09 6.20 6.20 6.20 6.69 5.42 5.42 5.49 5.49 5.49 5.92 4.96 4.96 5.03 5.03 5.03 5.42 4.58 4.58 4.64 4.64 4.64 5.01 7 7 7 8 8 8 5 12 24 5 12 24 200 500 2200 200 500 2200 5.80 5.80 6.20 3.62 6.20 6.69 5.14 5.14 5.49 3.21 5.49 5.92 4.71 4.71 5.03 2.94 5.03 5.42 4.35 4.35 4.64 2.71 4.64 5.01 9 9 9 10 10 10 5 12 24 5 12 24 200 500 2200 200 500 2200 7.79 8.94 8.94 8.07 4.91 9.40 6.81 7.81 7.81 7.07 4.29 8.22 6.24 7.16 7.16 6.48 3.93 7.53 5.76 6.61 6.61 5.98 3.63 6.95 11 11 11 12 12 12 5 12 24 5 12 24 200 500 2200 200 500 2200 8.23 8.37 8.53 9.01 9.01 9.36 7.20 7.33 7.46 7.88 7.88 8.18 6.60 6.71 6.83 7.23 7.23 7.50 6.09 6.20 6.31 6.67 6.67 6.92 13 13 14 14 14 5 24 5 12 24 200 3200 200 1000 3200 7.13 7.49 7.49 7.49 9.51 6.34 6.66 6.66 6.66 8.46 5.81 6.10 6.10 6.10 7.75 5.37 5.63 5.63 5.63 7.16 15 15 15 16 16 16 5 12 24 5 12 24 46 266 1066 46 266 1066 27.14 27.14 27.14 30.34 30.34 30.34 23.70 23.70 23.70 26.50 26.50 26.50 21.73 21.73 21.73 24.29 24.29 24.29 20.05 20.05 20.05 22.42 22.42 22.42 Class 171DIP, SPST-NC, 0.5 Amp 850-1703 850-1704 850-1705 850-1706 850-1729 850-1708 W171DIP-12 W171DIP-14 W171DIP-15 W171DIP-17 W171DIP-19 W171DIP-20 Class 171DIP, DPST-NO, 0.5 Amp 850-1621 850-1652 850-1624 850-1625 850-1627 850-1709 W171DIP-21 W171DIP-23 W171DIP-24 W171DIP-25 W171DIP-27 W171DIP-28 Class 172DIP, SPDT, 0.25 Amp 850-1631 850-1633 850-1634 850-1635 850-1637 850-1638 W172DIP-1 W172DIP-3 W172DIP-4 W172DIP-5 W172DIP-7 W172DIP-8 Class 172DIP, SPDT, 0.25 Amp 850-1710 850-1711 850-1712 850-1713 850-1714 850-1730 W172DIP-31 W172DIP-33 W172DIP-34 W172DIP-35 W172DIP-37 W172DIP-38 Class 172DIP, SPDT, 0.25 Amp 850-1716 850-1717 850-1718 850-1719 850-1720 W172DIP-141 W172DIP-146 W172DIP-147 W172DIP-149 W172DIP-150 Class 172DIP, DPDT, 0.5 Amp 850-1721 850-1722 850-1723 850-1673 850-1724 850-1676 W172DIP-17 W172DIP-19 W172DIP-20 W172DIP-21 W172DIP-23 W172DIP-24 Class 117SIP 4 Pin Reed Relays The 117SIP has a pin spacing of 0.2 between pins. The 117SIP is rated @ 10 VA, 0.5 amp switching and can carry up to 1.5 amps. 117SIP, SPST-NO, without Clamping Diode 850-1725 W117SIP-1 17 5 500 4.62 4.12 3.77 3.48 18 18 5 12 500 1870 4.91 4.91 4.38 4.38 4.01 4.01 3.70 3.70 19 19 5 12 500 1200 7.53 7.90 6.69 7.03 6.14 6.44 5.66 5.95 117SIP, SPST-NO, with Clamping Diode 850-1558 850-1726 W117SIP-6 W117SIP-8 117SIP, SPST-NC, with Clamping Diode 850-1727 850-1728 W117SIP-18 W117SIP-25 134 b ALLIED See Our Manufacturer Index Located In Section 1