TOSHIBA THS130 TOSHIBA HALL SENSOR GaAs ION IMPLANTED PLANAR TYPE THS130 HIGH STABILITY MOTOR CONTROL. Unit in mm DIGITAL TACHOMETER. 4.00.1 C07 C0.25 (Ca e High Internal Resistance. : Rg=2k0 (Typ.) $18 : 8 e Excellent Temperature Characteristics. | t 0.6 MAX | ol e Wide Operating Temperature Range. (; 55~125C) el 4) 0.40.1 a) N e Excellent Output Voltage Linearity. O0d + OJ MAXIMUM RATINGS (Ta = 25C) 1.0/1.0 ]1.0 = CHARACTERISTIC SYMBOL RAITING | UNIT al a a 1 4 err Control Voltage Vc 6 Vv [aS aaj) <t | Power Dissipation Pp 150 mW : 1(+) 3() (INPUT) Operating Temperature Tope _55~125 C 2(+) 4() (OUTPUT) Range p EDE Storage Temperature Range Tstg 55~150 C J c EIAJ TOSHIBA 10-4B1A Weight : 0.06 ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC SYMBOL TEST CONDITION MIN.|TYP.| MAX.| UNIT Internal Resistance (Input) Rq Ic =1mA 1.6} 2.0 2.4) ka Residual Voltage Ratio VHo/VH | Vc=5V, B=0/B=0.1T |- +10 Yo Hall Voltage (Note 1)| Vy Vc=5V, B=0.1T 130 | 150} 170} mV Temperature Coefficient Ic=1mA, B=0.1T, T1=25C (Note 2)| VHT | ra=125 = | = [79:08] B/C Linearity (Note 3) AK Vco=5V, B1=0.05T, B2=0.1T 2 % Specific Sensitivity (Note 4)| K* Vo=5V, B=0.1T 30} |x10-2/T Internal Resistance (Output) | Rout | Ic=0.5mA 4.2 | 6.0 7.8| ka Note 1: VA=VHM-VHO(VHM is meter indication) 1 Vv -V H (12) ~ TACT) x 100 (% /C) Note 2: VHT= . VHo : Residual Voltage HT VH (T1) T2-T1 y KH (B2) KH (B1) H pec Note 3 : AK = >__ X 100 (@) , Ku = = K : Product Sensitivity H''1/2{Kn (B1 +KH(B2)} H'IcB H Note 4: K*=Vy/(RqgXIcxB)=Ky/Rq 96100 1EAAZ @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1997-08-18 1/2 TOSHIBA THS130 Vo - Vc VH -B HALL VOLTAGE Vy (mV) HALL VOLTAGE Vy (mV) 1 2 3 4 5 6 7 0.04 0.08 0.12 0.16 0.2 0.24 0.28 CONTROL VOLTAGE Vc (V) MAGNETIC FLUX B_ (T) Rq Ta Rout Ta Rq (Q) INTERNAL RESISTANCE (INPUT) Rout ) INTERNAL RESISTANCE (OUTPUT) 80 40 0 40 80 120 160 200 80 40 0 40 80 120 160 200 AMBIENT TEMPERATURE Ta (C) AMBIENT TEMPERATURE Ta (C) VH Ta TA TI HALL VOLTAGE Vy (mV) -80 -40 0 40 80 120 160 200 AMBIENT TEMPERATURE Ta (C) 1997-08-18 2/2