PRODUCT DESCRIPTION
Electro-Wash PX is engineered for
removing contamination from fiber optic
connectors, modules, and cables, this
material is safe for most plastics.
Formulated with very low surface tension,
this high pressure aerosol formulation
flushes areas clean and evaporates instantly
leaving no residue.
Removes oils, grease and other
contaminants
Evaporates quickly
Leaves no residues
Has low odor
Is non-corrosive
Contains no CFCs or HCF Cs
Contains no 1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Electro-Wash PX cleans:
Buffer Gel from Cable
Contaminants from Transmitters,
Amplifie rs and Transceiver s
Soils from Optical Interfaces,
Electronic Interfaces, and Drive
Circuitry
Airborne Dirt from Printed Circuit
Boards
Insulating Residue from Selector
Switches and Rela ys
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 141°F I nitial
Vapor Densit y (air=1) >1
Solubilit y in Water 20%
Specific Gravity
(water = 1@77
°
F)
0.70
Evaporation Rate >1
(butyl acetate =1)
Appearance Clea r, Colorless Liquid
Odor Mild
Surface Tension
(dynes/cm @ 21.6
°
C)
17.3
Flash Point (TCC) -20°F
Kauri-Butanol
(KB) Numb er 50
COMPATIBILITY
Electro-Wash PX is generally compatible
with most materials used in the fiber optics
industry. With any cleaning agent
compatibility must be determined on a non-
critical area prior to use.
TDS 0810
CHEMTRONICS
Technical Data Sheet
Electro-Wash
PX
Cleaner Deg reaser
Material
Compatibility
ABS
Good
Buna-N
Good
EPDM
Poor
Graphite
Excellent
HDPE
Excellent
Kynar
Fair
LDPE
Fair
Lexan
Fair
Neoprene
Fair
Noryl
Good
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Good
Polystyrene
Non-Compatible
PVC
Good
Silicone Rubber
Non-Compatible
Teflon
Excellent
Viton
Excellent
Performance
Product Required for Oil Removal (mg solvent / 1
mg oil)
Electro-Wash PX
Conventional CFC
Cleaner 94
Water Soluble Oil Removal Rate (mg / in
∧
2 sec.)
Electro-Wash PX
11
Conventional CFC
Cleaner 5
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. Wash parts
from top to bottom, allowing the liquid to flush away
dirt and dissolved grease. For precise application
use attached extension tube. Do not use on
energized equipment.
AVAILABILITY
ES810 5 oz Aerosol
ES1210 12. 5 oz. Aerosol
ES110 1 Gal. L iquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
VOC
100%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
nPB
0.0
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTR ONICS d oes not guarantee th e accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. C (08/13)
DISTRIBUTED BY: