CHEMTRONICS Technical Data Sheet Electro-Wash PX TDS 0810 Cleaner Degreaser PRODUCT DESCRIPTION Electro-Wash PX is engineered for removing contamination from fiber optic connectors, modules, and cables, this material is safe for most plastics. Formulated with very low surface tension, this high pressure aerosol formulation flushes areas clean and evaporates instantly leaving no residue. Removes oils, grease and other contaminants Evaporates quickly Leaves no residues Has low odor Is non-corrosive Contains no CFCs or HCFCs Contains no 1,1,1 Trichloroethane TYPICAL APPLICATIONS Electro-Wash PX cleans: Buffer Gel from Cable Contaminants from Transmitters, Amplifiers and Transceivers Soils from Optical Interfaces, Electronic Interfaces, and Drive Circuitry Airborne Dirt from Printed Circuit Boards Insulating Residue from Selector Switches and Relays TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point 141F Initial Vapor Density (air=1) >1 Solubility in Water 20% Specific Gravity (water = 1@77F) 0.70 Evaporation Rate >1 (butyl acetate=1) Appearance Clear, Colorless Liquid Odor Mild Surface Tension (dynes/cm @21.6C) 17.3 Flash Point (TCC) -20F Kauri-Butanol (KB) Number 50 COMPATIBILITY Electro-Wash PX is generally compatible with most materials used in the fiber optics industry. With any cleaning agent compatibility must be determined on a noncritical area prior to use. Material ABS Buna-N EPDM Graphite HDPE Kynar LDPE Lexan Neoprene Noryl Nylon 66 Cross-Linked PE Polypropylene Polystyrene PVC Silicone Rubber Teflon Viton Compatibility Good Good Poor Excellent Excellent Fair Fair Fair Fair Good Excellent Excellent Good Non-Compatible Good Non-Compatible Excellent Excellent AVAILABILITY ES810 5 oz Aerosol ES1210 12.5 oz. Aerosol ES110 1 Gal. Liquid TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. 0.0% 0.0% 0.0% VOC HFC nPB 100% 0.0% 0.0 CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB percentages shown are the content by weight. Performance Product Required for Oil Removal (mg solvent / 1 mg oil) Electro-Wash PX 33 Conventional CFC Cleaner 94 Water Soluble Oil Removal Rate (mg / in2 sec.) Electro-Wash PX 11 Conventional CFC Cleaner 5 USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Spray 4-6 inches from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away dirt and dissolved grease. For precise application use attached extension tube. Do not use on energized equipment. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 REV. C (08/13) DISTRIBUTED BY: