https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 14 mm PLC basic terminal block for high switch-on currents with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918174170 Weight per Piece (excluding packing) 64.000 g Custom tariff number 85366990 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Type of note Notes on operation Note Separating plate PLC-ATP must be installed for voltages larger than 250V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500.... Type of note Notes on operation Note The PLC-ATP separating plate should be installed for safe isolation between adjacent modules Type of note Assembly instruction: Note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip. 01/16/2021Page1/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Technical data Note Type of note Notes on operation Note The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact. Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Maximum altitude 2000 m Degree of protection IP20 IP54 (Installation location) Input data Nominal input voltage UN 24 VDC Protective circuit Damping diode Polarity protection diode Output data Compatible components Miniature relay, REL-MR-24DC/1IC/ACT; miniature optocoupler, OPT-24DC/24DC/5, OPT-24DC/230AC/2 General Operating mode 100% operating factor Color gray Flammability rating according to UL 94 V0 (Housing) Mounting position any Assembly instructions In rows with zero spacing Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Connection data Connection name Input side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 01/16/2021Page2/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Technical data Connection data 2x 0.5 mm ... 1.5 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Output side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 2x 0.5 mm ... 1.5 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Standards and Regulations Connection in acc. with standard CUL Standards/regulations EN50178 EN61810-1 Rated insulation voltage 250 VAC Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation Pollution degree 2 Overvoltage category III Conformance/approvals Designation Corrosive gas test Identification ISA-S71.04. G3 Harsh Group EN60068-2-60 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 01/16/2021Page3/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Circuit diagram 13 A2 BB A1 14 Classifications eCl@ss eCl@ss 10.0.1 27371603 eCl@ss 11.0 27371603 eCl@ss 4.0 27371100 eCl@ss 4.1 27371100 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371603 eCl@ss 8.0 27371603 eCl@ss 9.0 27371603 ETIM ETIM 2.0 EC001456 ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001456 ETIM 6.0 EC001456 ETIM 7.0 EC001456 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122326 UNSPSC 18.0 39122335 UNSPSC 19.0 39122335 UNSPSC 20.0 39122335 UNSPSC 21.0 39122335 01/16/2021Page4/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Approvals Approvals Approvals PRS / UL Recognized / cUL Recognized / EAC / DNV GL / cULus Recognized Ex Approvals Approval details PRS http://www.prs.pl/ TE/2109/880590/16 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 EAC RU D-DE.B*00573/18 DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-03 cULus Recognized Accessories Accessories Bridge 01/16/2021Page5/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Continuous plug-in bridge-FBST 500-PLC RD-2966786 Continuous plug-in bridge, length: 500 mm, color: red Continuous plug-in bridge-FBST 500-PLC BU-2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge-FBST 500-PLC GY-2966838 Continuous plug-in bridge, length: 500 mm, color: gray Single plug-in bridge-FBST 6-PLC RD-2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge-FBST 6-PLC BU-2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue 01/16/2021Page6/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Single plug-in bridge-FBST 6-PLC GY-2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray Single plug-in bridge-FBST 8-PLC GY-2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray Single plug-in bridge-FBST 14-PLC BK-2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black Controller board System connection-PLC-V8L/FLK14/OUT-2299660 V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching System connection-PLC-V8L/FLK14/OUT/M-2304306 V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: negative switching 01/16/2021Page7/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver 01/16/2021Page8/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver 01/16/2021Page9/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver 01/16/2021Page10/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver Labeled terminal marker Zack marker strip-ZB 10 CUS-0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 01/16/2021Page11/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB10,QR:FORTL.ZAHLEN-1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB10,LGS:L1-N,PE-1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB10,LGS:U-N-1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 10 CUS-0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 01/16/2021Page12/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Marker for terminal blocks-UCT-TM 10 CUS-0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip-ZB 12 CUS-0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Zack marker strip-ZB 12,LGS:L1-N,PE-0812146 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Marker for terminal blocks-UC-TM 12 CUS-0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks-UCT-TM 12 CUS-0829630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Partition plate 01/16/2021Page13/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Separating plate-PLC-ATP BK-2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block-PLC-ESK GY-2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 Screwdriver tools Screwdriver-SZF 1-0,6X3,5-1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Zack marker strip-ZB 10:UNBEDRUCKT-1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 01/16/2021Page14/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Marker for terminal blocks-UC-TM 10-0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TM 10-0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip-ZB 12:UNPRINTED-0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of individual labels: 5 Marker for terminal blocks-UC-TM 12-0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks-UCT-TM 12-0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Necessary add-on products 01/16/2021Page15/16 https://www.phoenixcontact.com/us/products/2967837 Relay base-PLC-BSC- 24DC/ 1IC/ACT-2967837 Accessories Single relay-REL-MR- 24DC/1IC-2961341 Pluggable miniature power relay, with power contact for high switch-on currents up to 130A peaks, 1 N/O contact, input voltage: 24VDC Single relay-REL-MR- 24DC/ 1ICT-2987338 Pluggable miniature power relay, with tungsten pre-contact for high switch-on currents up to 800A peaks, 1 N/O contact, input voltage: 24VDC Miniature solid-state relay-OPT-24DC/ 24DC/ 5-2982100 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/5 A Miniature solid-state relay-OPT-24DC/230AC/ 2-2982171 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2 A Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/16/2021Page16/16