DS-327 Flatpack Two-Way Power Divider 5-1000 MHz Features n n n n n n n Rev. V3 Functional Schematic Broadband, IN Phase Divider Low Loss: 0.3 dB Typical Amplitude Balance: 0.05 dB Typical Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 0.05 Watts Max. MIL-STD-883 Screening Available Description A Power Divider is ideally a loss less reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration3 Pin No. Function Pin No. Function 1 11 GND 2 GND 12 GND 3 GND 13 GND 4 Output C 14 Output D 1,2 Ordering Information Part Number Package DS-327 PIN FP-2 1. Reference Application Note M513 for reel size information. 2. All sample boards include x loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-327 Flatpack Two-Way Power Divider 5-1000 MHz Rev. V3 Electrical Specifications1: TA = -55C to +85C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 500 MHz 500 - 1000 MHz dB dB -- -- -- -- 0.5 1.0 Isolation -- 5 - 500 MHz 500 - 1000 MHz dB dB 25 20 -- -- -- -- Amplitude Balance -- 5 - 1000 MHz dB -- -- 0.2 Phase Balance -- 5 - 500 MHz 500 - 1000 MHz -- -- -- -- 2 3 VSWR Input Output 10 - 500 MHz 5 - 1000 MHz Ratio Ratio -- -- -- -- 1.3:1 1.5:1 1. All specifications apply with 50 ohm source and load impedance. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-327 Flatpack Two-Way Power Divider 5-1000 MHz Rev. V3 Typical Performance Curves Isolation Insertion Loss 50 Isolation (dB) Insertion Loss (dB) 1.50 1.00 0.50 0.00 1 10 100 500 1000 F re que nc y ( M H z) 40 30 20 1 10 100 500 1000 F requency (M H z) VSWR VSWR 1.50 1.25 1.00 1 10 100 500 1000 F re que nc y ( M H z) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-327 Flatpack Two-Way Power Divider 5-1000 MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support