Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 1 of 15 North America only
FEATURES:
Models
Single output
Model
Max
Output
Power
(W)①
Output
Voltage
Range
(V)③
Output
Current
(A)③
Input
Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Mode of Operation
Efficiency
(%)
115
VAC
230
VAC
277
VAC
AMEPR30-5070AZ
35
36-50
0.7
90-305/47-440
130-430
Constant Current
84
83
83
Constant Voltage②
84
83
83
AMEPR30-4864AZ
30.7
36-48
0.64
90-305/47-440
130-430
Constant Current
84
83
83
Constant Voltage②
84
83
83
AMEPR30-36100AZ
36
24-36
1
90-305/47-440
130-430
Constant Current
84
83
83
Constant Voltage②
84
83
83
AMEPR30-24140AZ
33.6
12-24
1.4
90-305/47-440
130-430
Constant Current
83
82
82
Constant Voltage②
83
82
82
AMEPR30-12250AZ
30
5-12
2.5
90-305/47-440
130-430
Constant Current
81
80
80
Constant Voltage②
81
80
80
① Exceeding the maximum output power will permanently damage the converter.
② The dimming feature is not supported when units are used in Constant Voltage mode only.
③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All models
can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add “–NA” to part number when
ordering.
NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See
http://www.aimtec.com/terms-saleAMEPR30-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from
conventional electrical abnormalities with the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial,
and other areas or regions which are prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive
voltages surges or spikes, may damage or cause early life failure of product. In this case consideration should be made by the end user to
ensure that adequate line or mains surge suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure
to identify excessive line surges violations prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters
Conditions
Typical
Maximum
Units
Current (full load)
115 VAC
430
mA
230 VAC
250
mA
277 VAC
210
mA
Inrush current <2ms (cold start)
115 VAC
25
A
230 VAC
40
A
277 VAC
55
A
Leakage current
I/O
0.25
mA
I/FG, O/FG
3.5
mA
Power factor
115 VAC
0.96
230 VAC
0.90
277 VAC
0.85
External fuse
Recommended slow blow type
1
A
Start-up time
450
ms
• AC-DC Constant Current or Constant
Voltage LED Driver
• Over temperature protection
• Over current protection
• Input range 90-305VAC/47-440Hz
• Waterproof case rated IP68
• High efficiency up to 84%
• Power Factor Correction
• Operating temperature -40 to 85°C
• Dimmable via resistive / 0-10Vdc / PWM
• 5 Years Limited Warranty
• Short circuit protection
Click on Series name for product info on aimtec.com
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 2 of 15 North America only
Output Specifications
Parameters
Conditions
Typical
Maximum
Units
Current accuracy
±3
%
Line regulation
(LL-HL)
±2
%
Load regulation
0-100% load
±3
%
Ripple & Noise*
100
mV p-p
Hold-up time
50
ms
Current adjustment range⑤
100-10
%
④ Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end.
⑤ Note: from 0% to 10% dimming adjustment signal instability may be present.
Isolation Specifications
Parameters
Conditions
Typical
Rated
Units
Tested voltage
I/O
3sec
3750
VAC
I/FG
2000
VAC
O/FG
500
VAC
Isolation resistance
500VDC
>1000
MΩ
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
130
KHz
Over current protection
AMEPR30-5070AZ
0.77
A
AMEPR30-4864AZ
0.68
AMEPR30-36100AZ
1.04
AMEPR30-24140AZ
1.45
AMEPR30-12250AZ
2.55
Over voltage protection
Refer to Constant Current vs. Constant Voltage Mode curve
Short circuit protection
Auto recovery
Over temperature protection
110~120
oC
Operating temperature
With derating over 55°C
Refer to model application
oC
Maximum case temperature
100
oC
Storage temperature
-40 to +95
oC
Temperature coefficient
±0.02
% / oC
Cooling
Free air convection
Humidity
Non condensing
20~95
% RH
Case material
Plastic
Potting
Epoxy (IP68 rated)
Wires
UL1015 18AWG * 20CM
Weight
530
g
Dimensions (L X W X H)
5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm
MTBF
>400,000 hrs (MIL-HDBK-217F at t=+25°C)
Safety Specifications
Parameters
Agency approvals
CE
Standards
Designed to meet UL8750, IEC/EN 60950-1 standards,
EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13
Information Technology Equipment
EN55022 Class B
Harmonic Current Emissions
IEC/EN 61000-3-2, Class C
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2 Level 3
RF, Electromagnetic Field Immunity
IEC 61000-4-3 Level 2
Electrical Fast Transient / Burst Immunity
IEC 61000-4-4 Level 2
Surge Immunity
IEC 61000-4-5 Level 3
RF, Conducted Disturbance Immunity
IEC 61000-4-6 Level 2
Power frequency Magnetic Field Immunity
IEC 61000-4-8 Level 1
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 3 of 15 North America only
Dimensions
57.68
(2.27)
134.80
(5.30)
40.50
(1.59)
158.50
(6.24)
200.00
(8.00)
200.00
(8.00)
2.30
(0.09)
40.50
(1.59)
57.68
(2.27)
16.75
(0.66)
End View
Top View
Side View
32.00
(1.26)
Input/Output Wires are 18 AWG 20cm
NOTE: to adjust the output current connect a 20K Ohm pot between blue and white wire
Wire connection:
Analog (Resistive) Dimming Application Circuit
AMEPR30-AZ
N
1st LED
+Vout
1
1
-Vout
RED
BLACK
AC
BLUE
L
BROWN
GREEN
BLUE
WHITE Pot
Wire
Connection
Brown
AC L
Blue
AC N
Green
Ground
Red
+V output
Black
-V Output
Blue (Dimming)
+ Vs dimming
White (Dimming)
-Vs dimming
Model Number
Maximum Pot
Value (kΩ)
AMEPR30-5070AZ
4.68
AMEPR30-4864AZ
2.98
AMEPR30-36100AZ
11.13
AMEPR30-24140AZ
42.60
AMEPR30-12250AZ
44.04
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 4 of 15 North America only
0-10V Dimming Application Circuit
PWM (1KHz) Dimming Application Circuit
0-10Vdc
GND
R28
1K5, 0805
+Vs
-Vs
U1
LTV-817C
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 5 of 15 North America only
Derating
-40 -20 0 20 40 60 80 100
100
80
60
40
20
0
Free Air Convection
55 º C
Safe Operating Area
Ambient Temperature º C
85
70
20%
50%
Efficiency Vs. Input Voltage & Output Current (Constant Current Mode)
AMEPR30-5070AZ
76.53
85.27
64.60
84.24
66.42
83.46
50
55
60
65
70
75
80
85
90
0 0.2 0.4 0.6 0.8
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 6 of 15 North America only
AMEPR30-4864AZ
AMEPR30-36100AZ
76.2
85.2
64.3
84.1
66.1 83.2
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
78.28
84.15
69.30
84.14
69.30
83.95
50
55
60
65
70
75
80
85
90
0.0 0.2 0.4 0.6 0.8 1.0 1.2
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 7 of 15 North America only
AMEPR30-24140AZ
AMEPR30-12250AZ
77.82
84.96
67.24
83.54
67.24
83.34
50
55
60
65
70
75
80
85
90
0.1 0.4 0.7 1.0 1.3 1.6
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
77.58
83.50
64.71
81.77
66.09
81.35
50
55
60
65
70
75
80
85
90
0 1 2 3
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 8 of 15 North America only
PFC Value vs. Output Load Current (Constant Current Mode)
AMEPR30-5070AZ
AMEPR30-4864AZ
1.00 1.00
0.95 0.98
0.90 0.95
0.86 0.85
0.46 0.48
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.3 0.4 0.5 0.6 0.7 0.8 (A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 9 of 15 North America only
AMEPR30-36100AZ
AMEPR30-24140AZ
0.99 1.00
0.90 0.98
0.88 0.93
0.78 0.74
0.46 0.48
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 (A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
1.00 1.00
0.94 0.98
0.89 0.93
0.72 0.76
0.46 0.48
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.6 0.8 1.0 1.2 1.4 1.6 (A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 10 of 15 North America only
AMEPR30-12250AZ
PFC vs. Output power
AMEPR30-5070AZ
0.99 1.00
0.93 0.98
0.86
0.94
0.82 0.79
0.46 0.48
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.15 1.40 1.65 1.90 2.15 2.40 2.65 (A)
(PF) PF VS. Output Current
115VA
C
230VA
C
277VA
C
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 11 of 15 North America only
AMEPR30-24140AZ
Constant Current vs. Constant Voltage Mode
AMEPR30-5070AZ
36 50
50.63 52
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
36 38 40 42 44 46 48 50 52 54 (V)
(A) Constant Cuurrent Vs Constant Voltage
115 &
230 Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 12 of 15 North America only
AMEPR30-4864AZ
AMEPR30-36100AZ
36 48
48.6 50
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
36 38 40 42 44 46 48 50 52 (V)
(A) Constant Current Vs Constant Voltage
115 &
230 Vac
24.00 36.00
36.57 38.00
0.0
0.2
0.4
0.6
0.8
1.0
1.2
24 26 28 30 32 34 36 38 40 (V)
(A) Constant Current Vs Constant Voltage
115 &
230 Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 13 of 15 North America only
AMEPR30-24140AZ
AMEPR30-12250AZ
12.0 24.0
24.7 26.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
12 14 16 18 20 22 24 26 28 (V)
(A) Constant Current Vs Constant Voltage
115 &
230 Vac
512
12.6 14
0.0
0.5
1.0
1.5
2.0
2.5
3.0
5 7 9 11 13 15 (V)
(A) Constant Current Vs Constant Voltage
115 &
230 Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 14 of 15 North America only
Dimming Control (Output Current vs. Radj)
AMEPR30-5070AZ
AMEPR30-4864AZ
AMEPR30-36100AZ
0
0.01
0.023
0.0626
0.108
0.167
0.225
0.368
0.692 1.225 4.682
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 2 4 6 (KΩ)
(A) Output Current VS. Dimming-Resistance
115 &
230 Vac
0.000
0.001
0.002
0.014
0.045
0.096
0.175
0.293
0.522 0.964 2.980
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.0 1.0 2.0 3.0 4.0 (KΩ)
(A) Output Current VS. Dimming-Resistance
150 &
230 Vac
0.00
0.06
0.15
0.25
0.38
0.57
0.79
1.20
2.02 3.88 11.13
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0 5 10 15 (KΩ)
(A) Output Current VS. Dimming-Resistance
115 &
230 Vac
Series AMEPR30-AZ
up to 2.5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AH 15 of 15 North America only
AMEPR30-24140AZ
AMEPR30-12250AZ
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
0
0.113
0.226
0.385
0.584
0.8699
1.274
1.804
2.956
6.21 42.3
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
010 20 30 40 50 K(Ω)
(A) Output Current vs. Dimming-Resistance
115 &
230 Vac
0
0.125
0.3
0.532
0.838
1.24
1.87
2.82
4.21 10.17 44.04
0.0
0.5
1.0
1.5
2.0
2.5
3.0
010 20 30 40 50 (KΩ)
(A) Output Current VS. Dimming-Resistance.
115 &
230 Vac
