SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated 1 * * * * * * * 10A Current rating Input voltage range: 3.0V - 5.5V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 95% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard footprint and pin out NEW Product The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 95%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability EMC CHARACTERISTICS Fixed output versions 5Vin with wide trim 3.3Vin with wide trim 10% 3.6V to 0.8V 2.75V to 0.8V Setpoint accuracy 2.7% Line regulation 1.0% Load regulation 1.0% Minimum load 0A Overshoot/undershoot None Ripple and noise 0 to 20MHz BW 50mV pk-pk 25mV rms max. Temperature co-efficient 0.01%/C Transient response 50mV max. deviation 50s recovery to within 1.0% Remote sense 10% Vo compensation Input voltage range 3.0 to 5.5VDC No load 70mA Input current (max.) 8A max. @ Io max. and Vout = 3.3V Input current ripple 65mA rms Remote ON/OFF Start-up time (See Note 1) 20ms EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See table Insulation voltage Switching frequency Non-isolated Fixed 300kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions (Vertical version) (LxWxH) Pin length Vertical 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches 0.135 0.02 in (3.43 0.5mm) Weight MTBF INPUT SPECIFICATIONS Input current Electrostatic discharge Conducted immunity Radiated immunity 5g (0.18oz) Telcordia SR-332 7,042,000 ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, (See Note 2) Non-operating -40C to +100C -40C to +125C PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL60950 file No. E174104 TUV TUV Product Service (EN60950) Certificate No. B02 12 38572 035 CB report and certificate to IEC60950 File Name: sil10e.pdf Rev: 27 Feb 2003 SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER 8.8W 3.0V - 5.5V 0.8V 0A 10A 83% 1% 1.5% SIL10E-05S0V8-V 11W 3.0V - 5.5V 1.0V 0A 10A 86% 1% 1.5% SIL10E-05S1V0-V 13.2W 3.0V - 5.5V 1.2V 0A 10A 88% 1% 1% SIL10E-05S1V2-V(3) 16.5W 3.0V - 5.5V 1.5V 0A 10A 90% 1% 1% SIL10E-05S1V5-V 19.8W 3.0V - 5.5V 1.8V 0A 10A 92% 1% 1% SIL10E-05S1V8-V 22W 3.0V - 5.5V 2.0V 0A 10A 93% 1% 1% SIL10E-05S2V0-V 27.5W 3.0V - 5.5V 2.5V 0A 10A 94% 1% 1% SIL10E-05S2V5-V(3) 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% 1% 1% SIL10E-05S3V3-V 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% 1% 1% SIL10E-05W3V3-V Part Number System with Options REGULATION SIL10E-05S3V3-V Product Family SIL = Single In Line Rated Output Current 10 = 10Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0V - 5.5V 12 = 10V - 14V Mounting Option V = Vertical Mount H = Horizontal Mount Output Voltage 2.5V, 3.3V etc Number of Outputs S = Single W = Wide Output Voltage Adjustment of the SIL10-05Wxxx Series Output Voltage Adjustment of the SIL10E-05W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.6V. When the SIL10E-05W3V3 converter leaves the factory the output has been adjusted to the default voltage of 3.3V * When Vin 4.5V, then Vout can be adjusted from 0.8V to 3.6V * When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V Notes 1 2 3 Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. Full de-rating curves available in both the Long Form Data Sheet and Application Note 134. For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix `02' to the model, e.g. SIL10E-05S2V5-V02. CAUTION: High internal temperatures. Ensure that unit is not user accessible. File Name: sil10e.pdf Rev: 27 Feb 2003 SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PIN VIEW 2.000 0.020 (50.80 0.50) SIDE VIEW 0.500 (12.70) PCB 6 5 3 2 5 1 4 3 J2 J1 PIN CONNECTIONS 0.316 0.008 (8.03 0.20) 2 1 J1 0.100 (2.54) 0.170 (4.32) PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Remote Sense (+) 4 +Vout 5 Ground 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.15 3 Place 0.006 Figure 1: Mechanical Drawing - Horizontal Mount Version J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF SIDE VIEW FRONT VIEW 0.307 0.008 (7.80 0.20) 2.000 0.020 (50.80 0.50) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 J1 0.168 (4.26) 2 3 J2 5 6 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.15 3 Place 0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet (c) Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: sil10e.pdf Rev: 27 Feb 2003