DC/DC CONVERTERS E Class Non-isolated 1
2 YEAR WARRANTY
SIL10E Series
Single output
NEW Product
All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability Fixed output versions ±10%
5Vin with wide trim 3.6V to 0.8V
3.3Vin with wide trim 2.75V to 0.8V
Setpoint accuracy ±2.7%
Line regulation ±1.0%
Load regulation ±1.0%
Minimum load 0A
Overshoot/undershoot None
Ripple and noise 50mV pk-pk
0 to 20MHz BW 25mV rms max.
Temperature co-efficient ±0.01%/ºC
Transient response 50mV max. deviation
50µs recovery to
within ±1.0%
Remote sense 10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range 3.0 to 5.5VDC
Input current No load 70mA
Input current (max.) 8A max. @ Io max.
and Vout = 3.3V
Input current ripple 65mA rms
Remote ON/OFF (See Note 1)
Start-up time 20ms
File Name: sil10e.pdf Rev: 27 Feb 2003
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104
UL60950 file No. E174104
TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38572 035
CB report and certificate to IEC60950
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency See table
Insulation voltage Non-isolated
Switching frequency Fixed 300kHz typ.
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm
(Vertical version) 2.0 x 0.31 x 0.5 inches
Pin length Vertical 0.135 ±0.02 in (3.43 ±0.5mm)
Weight 5g (0.18oz)
MTBF Telcordia SR-332 7,042,000
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +100ºC
(See Note 2)
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Continuous
Thermal protection Automatic recovery
•10A Current rating
•Input voltage range: 3.0V - 5.5V
•Output voltage range: 0.8V - 3.63V
•Ultra high efficiency: 95% @ 5Vin and 3.3Vout
•Extremely low internal power dissipation
•Minimal thermal design concerns
•Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
•Ideal solution where board space is at a premium
or tighter card pitch is required
•Industry standard footprint and pin out
The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from either a 5V or a 3.3V source.
The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry
leading 10A which allows maximum design flexibility and a pathway for future upgrades.
The SIL10E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface mount
technology and automated manufacturing techniques, the SIL10E offers compact size and
efficiencies of up to 95%.
Output Voltage Adjustment of the SIL10-05Wxxx Series
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes
1Referenced to ground for shutdown. If pin 6 is high unit will shutdown.
If pin 6 is open unit will operate as normal. Converter is guaranteed OFF
when control pin is greater than 1.2V.
2Full de-rating curves available in both the Long Form Data Sheet and
Application Note 134.
3For certain applications that use low ESR capacitors on the output of the
convertor and to insure maximum converter stability, please add the
suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02.
CAUTION: High internal temperatures. Ensure that unit is not user
accessible.
SIL10E Series
Single output
DC/DC CONVERTERS E Class Non-isolated2
NEW Product
File Name: sil10e.pdf Rev: 27 Feb 2003
SIL10E-05S3V3-V
Part Number System with Options
Product Family
SIL = Single In Line
Rated Output Current
10 = 10Amps
Mounting Option
V = Vertical Mount
H= Horizontal Mount
Number of Outputs
S = Single
W = Wide
Input Voltage
05 = 3.0V - 5.5V
12 = 10V - 14V
Output Voltage
2.5V, 3.3V etc
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8V to 3.6V. When the SIL10E-05W3V3 converter
leaves the factory the output has been adjusted to the default voltage of 3.3V
•When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V
• When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V
Output Voltage Adjustment of the SIL10E-05W3V3 Series
OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER
(MAX.) (MIN.) (MAX.)
8.8W 3.0V - 5.5V 0.8V 0A 10A 83% ±1% ±1.5% SIL10E-05S0V8-V
11W 3.0V - 5.5V 1.0V 0A 10A 86% ±1% ±1.5% SIL10E-05S1V0-V
13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±1% ±1% SIL10E-05S1V2-V(3)
16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±1% ±1% SIL10E-05S1V5-V
19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±1% ±1% SIL10E-05S1V8-V
22W 3.0V - 5.5V 2.0V 0A 10A 93% ±1% ±1% SIL10E-05S2V0-V
27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±1% ±1% SIL10E-05S2V5-V(3)
36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05S3V3-V
36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05W3V3-V
Performance
E= Enhanced Performace
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL10E Series
Single output
DC/DC CONVERTERS E Class Non-isolated 3
NEW Product
0.170 (4.32)
0.316 ±0.008
(8.03 ±0.20)
PCB
SIDE VIEW
PIN VIEW
2.000 ±0.020
(50.80 ±0.50)
0.100 (2.54)
1.900 (48.26) 0.050 (1.27)
0.500 (12.70)
J1
J2
15362 1543 2
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
Figure 1: Mechanical Drawing - Horizontal Mount Version
Figure 2: Mechanical Drawing - Vertical Mount Version
Data Sheet © Artesyn Technologies
®
2003
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com
File Name: sil10e.pdf Rev: 27 Feb 2003
J1 PIN CONNECTIONS
PIN NUMBER FUNCTION
1+Vout
2+Vout
3Remote Sense (+)
4+Vout
5Ground
J2 PIN CONNECTIONS
PIN NUMBER FUNCTION
1Ground
2+Vin
3+Vin
4No Pin
5Trim
6Remote ON/OFF
1.900 (48.26)
0.050 (1.27)
0.100 (2.54)
2.000 ±0.020
(50.80 ±0.50)
FRONT VIEW
0.500 (12.70)
0.635 (16.13)
0.135 (3.43)
PCB
0.168 (4.26)
SIDE VIEW
0.307 ±0.008
(7.80 ±0.20)
J1 J2
15432 15632
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
