SµMMIT FAMILY - 159
26.0 ORDERING INFORMATION
ENHANCED SµMMIT E MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal Monitor
UT 69151 * * * *
Lead Finish:
(A) =Solder
(C) =Gold
(X) =Optional
Screening:
(C) = Military Temperature
(P) =Prototype
Package Type:
(G) =85-pin PGA
(W) =84-lead FP
(F) = 132-lead FP (.025 pitch, NCS)
E = SMD Device Type 03 (non-RadHard)
C = SMD Device Type 04 (non-RadHard)
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified when ordering then the part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Military Temperature Range devices are burned-in and tested at -55°C, room temperature, and -125°C. Radiation neither tested nor guaranteed.
4. Lead finish is at UTMC’s option. "X" must be specified when ordering. Radiation neither tested or guaranteed.
ENHANCED SµΜΜIT E MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal Monitor: SMD
5962 * * * * * * Lead Finish:
(A) = Solder
(C) =Gold
(X) =Optional
Case Outline:
(X) =85-pin PGA (non-RadHard only)
(Y) =84-pin FP
(Z) = 132-lead FP (.025 pitch, NCS) (non-RadHard only)
Class Designator:
(V) = Class V
(Q) = Class Q
Device Type:
(04) = RadHard Enhanced SµMMIT
(03) = Non-RadHard Enhanced SµMMIT
Drawing Number: 92118
Radiation:
- = None
(F) = 3E5 (300KRad)
(R) = 1E5 (100KRad)
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified when ordering, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Device Type 03 not available as rad hard.
SµMMIT FAMILY - 160
ENHANCED SµMMIT LXE/DXE MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver
Multichip Module
Lead Finish:
(A) =Solder
(C) =Gold
(X) =Optional
Screening:
(C) = Military Temperature
(P) = Prototype
Package Type:
(G) = 96-pin PGA
(W) =100-lead FP
Device Type Modifier:
(LXE12) = +5V/-12V operation
(LXE15) = +5V/-15V operation
(DXE) = +5V operation
- = SMD device type 07, 08 (Non-RadHard)
C = SMD device type 10, 11 (Non-RadHard)
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified when ordering then the part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Military Temperature Range devices are burned-in and tested at -55°C, room temperature, and -125°C. Radiation neither tested nor guaranteed.
4. Prototype lead finish is gold only. Lead finish is at UTMC’s option. “X” must be specified when ordering. Radiation neither tested or guaranteed.
ENHANCED SµMMIT LXE/DXE: MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/
Transceiver Multichip Module: SMD
5962 * * * * * *
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
Lead Finish:
(A) =Solder
(C) =Gold
(X) =Optional
Case Outline:
(X) =96-pin PGA (non-RadHard)
(Y) =100-lead FP
Class Designator:
(V) = Class V
(Q) = Class Q
Device Type:
(10) = RH SuMMIT LXE15
(11) = RH SuMMIT DXE5
(07) = Non-RH SuMMIT LXE15
(08) = Non-RH SuMMIT DXE5
(09) = Non-RH SuMMIT LXE12
Drawing Number: 94663
Radiation:
- = None
(F) = 3E5 (Device type 11 Only) (300K Rad)
(R) = 1E5 (Device type 10 & 11 Only) (100KRad)
UT 69151 * * * * *
SµMMIT FAMILY - 161
ENHANCED SµMMIT XTE MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver
Multichip Module
Radiation:
None
Lead Finish:
(A) =Solder
(C) =Gold
(X) =Optional
Screening:
(C) = Military Temperature
(P) = Prototype
Package Type:
(G) = 139-pin PGA
(W) =140-pin FP
Device Type Modifier:
(XTE12) = +5V/-12V operation
(XTE15) = +5V/-15V operation
(XTE5) = +5V operation
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified when ordering then the part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Military Temperature Range devices are burned-in and tested at -55°C, room temperature, and -125°C. Radiation neither tested nor guaranteed.
4. Prototype asembly are tested at +25C only. Lead finish is GOLD only. Radiation neither tested or guaranteed.
ENHANCED SµMMIT XTE: MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver
Multichip Module: SMD
5962 * * * * * *
Notes:
1. Lead finish (A,C, or X) must be specified.
2. If an “X” is specified, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Device types 04, 05, 06 available until 4Q98.
4. Device types 07, 08, 09 available after 4Q98.
Lead Finish:
(A) =Solder
(C) =Gold
(X) =Optional
Case Outline:
(X) =139-pin PGA
(Y) =140-pin FP
Class Designator:
(Q) = Class Q
Device Type:
(04) = SuMMIT XTE 5V/15V
(05) = SuMMIT XTE 5V
(06) = SuMMIT XTE 5V/12V
(07) = SuMMIT XTE 5V/15V (4Q98)
(08) = SuMMIT XTE 5V/5V (4Q98)
(09) = SuMMIT XTE 5V/12V (4Q98)
Drawing Number: 94758
Radiation:
None
UT 69151 - * * * * *
