26.0 ORDERING INFORMATION ENHANCED SMMIT E MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal Monitor UT 69151 * * * * Lead Finish: (A) = Solder (C) = Gold (X) = Optional Screening: (C) = Military Temperature (P) = Prototype Package Type: (G) = 85-pin PGA (W) = 84-lead FP (F) = 132-lead FP (.025 pitch, NCS) E = SMD Device Type 03 (non-RadHard) C = SMD Device Type 04 (non-RadHard) Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified when ordering then the part marking will match the lead finish and will be either "A" (solder) or "C" (gold). 3. Military Temperature Range devices are burned-in and tested at -55C, room temperature, and -125C. Radiation neither tested nor guaranteed. 4. Lead finish is at UTMC's option. "X" must be specified when ordering. Radiation neither tested or guaranteed. ENHANCED SIT E MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal Monitor: SMD 5962 * * * * * * Lead Finish: (A) = Solder (C) = Gold (X) = Optional Case Outline: (X) = 85-pin PGA (non-RadHard only) (Y) = 84-pin FP (Z) = 132-lead FP (.025 pitch, NCS) (non-RadHard only) Class Designator: (V) = Class V (Q) = Class Q Device Type: (04) = RadHard Enhanced SMMIT (03) = Non-RadHard Enhanced SMMIT Drawing Number: 92118 Radiation: = None (F) = 3E5 (300KRad) (R) = 1E5 (100KRad) Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified when ordering, part marking will match the lead finish and will be either "A" (solder) or "C" (gold). 3. Device Type 03 not available as rad hard. SMMIT FAMILY - 159 ENHANCED SMMIT LXE/DXE MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver Multichip Module UT 69151 * * * * * Lead Finish: (A) = Solder (C) = Gold (X) = Optional Screening: (C) = Military Temperature (P) = Prototype Package Type: (G) = 96-pin PGA (W) = 100-lead FP Device Type Modifier: (LXE12) = +5V/-12V operation (LXE15) = +5V/-15V operation (DXE) = +5V operation C = SMD device type 07, 08 (Non-RadHard) = SMD device type 10, 11 (Non-RadHard) Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified when ordering then the part marking will match the lead finish and will be either "A" (solder) or "C" (gold). 3. Military Temperature Range devices are burned-in and tested at -55C, room temperature, and -125C. Radiation neither tested nor guaranteed. 4. Prototype lead finish is gold only. Lead finish is at UTMC's option. "X" must be specified when ordering. Radiation neither tested or guaranteed. ENHANCED SMMIT LXE/DXE: MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/ Transceiver Multichip Module: SMD 5962 * * * * * * Lead Finish: (A) = Solder (C) = Gold (X) = Optional Case Outline: (X) = 96-pin PGA (non-RadHard) (Y) = 100-lead FP Class Designator: (V) = Class V (Q) = Class Q Device Type: (10) = RH SuMMIT LXE15 (11) = RH SuMMIT DXE5 (07) = Non-RH SuMMIT LXE15 (08) = Non-RH SuMMIT DXE5 (09) = Non-RH SuMMIT LXE12 Drawing Number: 94663 Radiation: = None (F) = 3E5 (Device type 11 Only) (300K Rad) (R) = 1E5 (Device type 10 & 11 Only) (100KRad) Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified, part marking will match the lead finish and will be either "A" (solder) or "C" (gold). SMMIT FAMILY - 160 ENHANCED SMMIT XTE MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver Multichip Module UT 69151 - * * * * * Radiation: None Lead Finish: (A) = Solder (C) = Gold (X) = Optional Screening: (C) = Military Temperature (P) = Prototype Package Type: (G) = 139-pin PGA (W) = 140-pin FP Device Type Modifier: (XTE12) = +5V/-12V operation (XTE15) = +5V/-15V operation (XTE5) = +5V operation Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified when ordering then the part marking will match the lead finish and will be either "A" (solder) or "C" (gold). 3. Military Temperature Range devices are burned-in and tested at -55C, room temperature, and -125C. Radiation neither tested nor guaranteed. 4. Prototype asembly are tested at +25C only. Lead finish is GOLD only. Radiation neither tested or guaranteed. ENHANCED SMMIT XTE: MIL-STD-1553 Dual Redundant Bus Controller/Remote Terminal/Monitor/Transceiver Multichip Module: SMD 5962 * * * * * * Lead Finish: (A) = Solder (C) = Gold (X) = Optional Case Outline: (X) = 139-pin PGA (Y) = 140-pin FP Class Designator: (Q) = Class Q Device Type: (04) = SuMMIT XTE 5V/15V (05) = SuMMIT XTE 5V (06) = SuMMIT XTE 5V/12V (07) = SuMMIT XTE 5V/15V (4Q98) (08) = SuMMIT XTE 5V/5V (4Q98) (09) = SuMMIT XTE 5V/12V (4Q98) Drawing Number: 94758 Radiation: None Notes: 1. Lead finish (A,C, or X) must be specified. 2. If an "X" is specified, part marking will match the lead finish and will be either "A" (solder) or "C" (gold). 3. Device types 04, 05, 06 available until 4Q98. 4. Device types 07, 08, 09 available after 4Q98. SMMIT FAMILY - 161