8 7 6 5 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION _, Loc DIST REVISIONS COPYRIGHT BY TYCO ELECTRONICS CORPORATION. ALL INTERNATIONAL RIGHTS RESERVED. GP OO P LTR DESCRIPTION DATE DWN APVD C REVISED PER ECO-08-011977 24JULo8 JJDPICWR TO /\ FOR MINI-APPLICATOR AND STRIPPER CRIMPER. oT / FOR HAND TOOL USE ONLY. 5 aD, 3. WIRE RANGE OF 2024 AWG. INSULATION RANGE OF 5 [.010] [.085] 4. GOLD PLATING MAY NOT APPEAR ON CARRIER STRIP. SSS } i /\. COLD PLATED IN LOCALIZED COLD PLATE AREA AS FOLLOWS: 7.62 = = 0.76um [.000030] MIN GOLD IN MATED AREA, 2.54um [.300] a > + [.000100] MIN TIN ON WIRE BARRELS, ALL OVER 1.27um ! [.000050] MIN NICKEL UNDERPLATE. OR 10.13 GOLD FLASH OVER PALLADIUMNICKEL PLATE, 0.76um 9.911655 [.000030] MIN TOTAL IN MATED AREA, 2.54um [.000100] MIN oT + O05 TIN ON WIRE BARRELS, ALL OVER 1.27um [.000050] MIN __ 4 390 | NICKEL UNDERPLATE. ay .008 40.95 / COLD FLASH IN LOCALIZED GOLD PLATE AREA, 2.54um Lo ~ 14.6115 674% _ [.000100] MIN TIN PLATED WIRE BARRELS, ALL OVER 575 [+919] 0.76um [.000030] MIN NICKEL UNDERPLATE. 005 /X. COLD FLASH IN LOCALIZED GOLD PLATE AREA, 0.76um COLOR CODED RED, ON FAR SIDE [.000030] MIN TIN PLATED WIRE BARRELS, ALL OVER INDICATES 2024 AWG WIRE RANGE 0.76um [.000030] MIN NICKEL UNDERPLATE. LOOSE PIECE ONLY . . x > 1.02+0.04 DIA LL Lr [.0400+.0015] v J 2 / ' wy 3.94 [.155] LOCALIZED GOLD PLATE AREA . . 2.27 _ 1.73 TO-<9 2.67 O10 105 tcl .o68 .005 SECTION XX SECTION YY rN 7X STRIP 16585395 INSULATION BARREL WIRE BARREL Je /X LOOSE PIECE 1658539-4 SCALE 20:1 SCALE 20:1 >A\ / LOOSE PIECE 16585393 J /\ STRIP 1658539-2 AX STRIP 16585391 PART A FINISH] USE TYPE NUMBER A THIS DRAWING IS A CONTROLLED DOCUMENT. |S camo TIAUGOS z=, Tyco Electronics Corporation CHK TIAUGOS Electronics Harrisburg, PA 17105-3608 DIMENSIONS: ORES EES, Ges res a mm [INCHES] M. WALMSLEY PIN CONTACT, 20 DF, oO PLC + _ PRODUCT SPEC 4 PLC + _ _ Or PLC on [098] aos 20-24 AWG, AMPLIMITE ANGLES + 4 _ 1141 0000 SIZE CAGE CODE | DRAWING NO RESTRICTED TO MATERIAL FINISH BRASS SEE TABLE al ~~ A | 00779 Ge p80 = CUSTOMER DRAWING SA 07 PT 4 TR 4805 (1/08)