Han® 24 HPR enlarged
09 45 600 0630
09 45 600 0640
09 45 600 0600
09 45 600 0620
Industrial Ethernet Cable
8-wires, Cat. 6, PUR
HARTING Industrial Cable 8-wire, Cat. 6, PUR
Industrial Cable
8-wire, Cat. 6, PUR
All data given is in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
GeneralAdvantages
Identifi cation Part number Drawing
20 m ring
50 m ring
100 m ring
500 m reel
• Wire: bare stranded copper, AWG27/7
• Insulation: PE, Ø 0.98 mm
• Pairs : Aluminate foil overlapped PIMF
• Overall screen: tinned copper wire braid,
braid coverage about 60%
• Outer sheath: PUR, fl ame retardant, lead free
Color code: whbu/bu, whor/or, whgn/gn, whbr/br
Color of outer sheath: rape yellow, RAL 1021
Overall diameter: 6.3 mm – 6.9 mm
Suitable for generic cabling Category 6 /
Class E according ISO/IEC 11801 respec-
tively EN 50173-1 especially for fl exible
installation (patch cords)
Qualifi ed for transmission up to 1GigaBit
Ethernet 1000Base-T acc. IEEE802.3ab
Based on stranded copper wires 27/7AWG
delivers patch cord performance up to
250MHz
Applicable for industrial premises
High EMC capability based on the PIMF
construction
Flame retardant, halogen free and RoHS
compliant
•
•
•
•
•
•
This high-speed data cable was designed for fl exible installati-
on in industrial premises and it’s especially suitable for termi-
nation of HARTING RJ45 data plugs in IP20 as well as in
IP 67 / 65.
The four pair / eight wire PIMF-construction allows the
transmission of IT digital and analogue signals like Ethernet
10/100Mbit/s, 1GigaBit/s, video and voice services as well as
IP-based data services.
It delivers all characteristics to complete a Generic cabling
system according ISO/IEC 24702:2006 respectively EN 50173-
3:2007. Maximum patch cord length specifi ed up to 20m
(part of transmission channel class E)
Transmission performance meets Cat.6 specifi cation up
to 250MHz for 1GigaBit Ethernet transmission according
IEEE802.3ab.
The cable is fully screened (each pair in metal foil plus an
overall wire braid) and guaranties a very protective signal
transmission and high EMC performance.
PUR is used as jacket material. The cable is fl ame retardant,
halogen free and RoHS compliant.
HARTING Industrial Cable 8-wire, Cat. 6, PUR
Technical Characteristics
Performance
Mechanical Characteristics
Minimal bending radius
Tensile strength
Electrical Characteristics at 20°C
DC loop resistance
Insulation resistance
Propagation delay
Characteristic impedance 1 - 100 MHz
Characteristic impedance 100 - 250 MHz
Mean characteristic impedance 10 - 250 MHz
Test voltage
Operating voltage
Chemical Characteristics
Flame retardant
Free of hazardous substances
Thermal Characteristics
Temperature range
Printing
Weight about
Category 6 according to EN 50288-5-2
During installation: 8 x diameter
After installation: 4 x diameter
max. 70 N
385 Ohm/km
1.5 TOhm x km
4.6 ns/m
100 Ohm - 115 Ohm
100 Ohm - 110 Ohm
100 Ohm - 110 Ohm
700V
max. 100V
IEC 60332-1-2
RoHS 2002/95/EG
- 40° C bis + 70° C
HARTING INDUSTRIAL CABLE S/FTP CAT 6 PUR
4x2xAWG27/7 094560006000100 „year/internal order number“
„sequential length in metres“ Textintervals about 1000 mm
43 kg/km
2007-10-08
HARTING Industrial Cable 8-wire, Cat. 6, PUR
HARTING Electric GmbH & Co. KG
Wilhelm-Harting-Straße 1 | D-32339 Espelkamp | Postfach 14 73 | D-32328 Espelkamp
Tel.: +49 5772 47-97100 | Fax: +49 5772 47-688 | HARTING.Electric@HARTING.com | www.HARTING.com
Technical Characteristics
* EN 50288-5-2 (except Attenuation max. 10% higher)
typ. Cat 6
max* typ. Cat 6
max* typ. Cat 6
max* typ. Cat 6
max* typ. Cat 6
max* typ. Cat 6
max*
13.0 3.1 75 66 75 64 80 66 80 64 24 20
45.6 5.8 80 65.3 80 63.3 80 58 80 55 27 23
10 8.7 9.0 95 59.3 90 57.3 75 50 70 47 29 25
16 11 11.4 95 56.2 90 54.2 70 45.9 68 43 29 25
20 12.2 12.8 91 54.8 88 52.8 68 44.0 65 41 29 25
31.25 15.3 16.1 88 51.9 86 49.9 62 40.1 62 37.1 30 23.6
62.5 22 23.2 83 47.4 78 45.3 45 34.1 45 31.1 30 21.53
100 28.3 29.9 77 44.3 75 42.3 38 30.0 40 27 30 20.1
155 36 38.0 72 41.4 70 39.4 38 26.2 38 23.2 26 18.8
200 41.5 43.7 68 39.8 67 37.8 37 24 37 21 23 18
250 47.1 49.5 65 38.3 65 36.3 35 22 35 19 22 17.32
Frequency
MHz Attenuation
dB/100m NEXT
dB PS NEXT
dB EL FEXT
dB PS EL FEXT
dB Return Loss
dB
