MJ15001 - Motorola / Freescale Semiconductor

Motorola Bipolar Power Transistor Device Data

  



The MJ15001 and MJ15002 are EpiBase power transistors designed for high

power audio, disk head positioners and other linear applications.

•High Safe Operating Area (100% Tested) —

200 W @ 40 V

50 W @ 100 V

•For Low Distortion Complementary Designs

•High DC Current Gain —

hFE = 25 (Min) @ IC = 4 Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

MAXIMUM RATINGS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Rating

ÎÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎ

Value

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Voltage

ÎÎÎÎÎÎÎ

VCEO

ÎÎÎÎÎÎÎÎ

140

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Base Voltage

ÎÎÎÎÎÎÎ

VCBO

ÎÎÎÎÎÎÎÎ

140

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter–Base Voltage

ÎÎÎÎÎÎÎ

VEBO

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Current — Continuous

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base Current — Continuous

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter Current — Continuous

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Total Power Dissipation @ TC = 25

Derate above 25

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

200

1.14

ÎÎÎÎ

Watts

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Operating and Storage Junction Temperature Range

ÎÎÎÎÎÎÎ

TJ, Tstg

ÎÎÎÎÎÎÎÎ

–65 to +200

ÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

THERMAL CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎ

Max

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Thermal Resistance, Junction to Case

ÎÎÎÎÎÎÎ

RθJC

ÎÎÎÎÎÎÎÎ

0.875

ÎÎÎÎ

C/W

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Maximum Lead Temperature for Soldering Purposes:

1/16″ from Case for

10 seconds

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

265

ÎÎÎÎ



SEMICONDUCTOR TECHNICAL DATA Order this document

by MJ15001/D

 Motorola, Inc. 1995





15 AMPERE

POWER TRANSISTORS

COMPLEMENTARY

SILICON

140 VOLTS

200 WATTS





CASE 1–07

TO–204AA

(TO–3)

 

2 Motorola Bipolar Power Transistor Device Data

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ELECTRICAL CHARACTERISTICS (TC = 25

C unless otherwise noted)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎ

Symbol

ÎÎÎÎ

Min

ÎÎÎÎ

Max

ÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

OFF CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Sustaining Voltage (1)

(IC, = 200 mAdc, IB = 0)

ÎÎÎÎ

VCEO(sus)

ÎÎÎÎ

140

ÎÎÎÎ

—

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Cutoff Current

(VCE = 140 Vdc, VBE(off) = 1.5 Vdc)

(VCE = 140 Vdc, VBE(off) = 1.5 Vdc, TC = 150

ÎÎÎÎ

ICEX

ÎÎÎÎ

—

ÎÎÎÎ

100

ÎÎÎ

µAdc

mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Cutoff Current

(VCE = 140 Vdc, IB = 0)

ÎÎÎÎ

ICEO

ÎÎÎÎ

—

ÎÎÎÎ

250

ÎÎÎ

µAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter Cutoff Current

(VEB = 5 Vdc, IC = 0)

ÎÎÎÎ

IEBO

ÎÎÎÎ

—

ÎÎÎÎ

100

ÎÎÎ

µAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

SECOND BREAKDOWN

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Second Breakdown Collector Current with Base Forward Biased

(VCE = 40 Vdc, t = 1 s (non–repetitive))

(VCE = 100 Vdc, t = 1 s (non–repetitive))

ÎÎÎÎ

IS/b

ÎÎÎÎ

0.5

ÎÎÎÎ

—

ÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ON CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DC Current Gain

(IC = 4 Adc, VCE = 2 Vdc)

ÎÎÎÎ

hFE

ÎÎÎÎ

150

ÎÎÎ

—

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Saturation Voltage

(IC = 4 Adc, IB = 0.4 Adc)

ÎÎÎÎ

VCE(sat)

ÎÎÎÎ

—

ÎÎÎÎ

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base–Emitter On Voltage

(IC = 4 Adc, VCE = 2 Vdc)

ÎÎÎÎ

VBE(on)

ÎÎÎÎ

—

ÎÎÎÎ

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DYNAMIC CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Current–Gain — Bandwidth Product

(IC = 0.5 Adc, VCE = 10 Vdc, ftest = 0.5 MHz)

ÎÎÎÎ

—

ÎÎÎ

MHz

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Output Capacitance

(VCB = 10 Vdc, IE = 0, ftest = 1 MHz)

ÎÎÎÎ

Cob

ÎÎÎÎ

—

ÎÎÎÎ

1000

ÎÎÎ

(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle

2%.

IC, COLLECTOR CURRENT (AMP)

Figure 1. Active–Region Safe Operating Area

VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS)

5 7 10 200

2 3 50 70 10020 30

200

0.5

0.2

0.7

0.3

TC = 25

TJ = 200

BONDING WIRE LIMITED

THERMAL LIMITATION (SINGLE PULSE)

SECOND BREAKDOWN LIMITED

CURVES APPLY BELOW RATED VCEO

There are two limitations on the power handling ability of a

transistor: average junction temperature and second break-

down. Safe operating area curves indicate IC – VCE limits of

the transistor that must be observed for reliable operation;

i.e., the transistor must not be subjected to greater dissipa-

tion than the curves indicate.

The data of Figure 1 is based on T J (pk) = 200

C; TC is

variable depending on conditions. At high case temper-

atures, thermal limitations will reduce the power that can be

handled to values less than the limitations imposed by

second breakdown.

 

Motorola Bipolar Power Transistor Device Data

fT, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz)

IC, COLLECTOR CURRENT (AMP)

0.7 1 2 3 5 107 200.2 0.3 0.5 20.7 1 2 3 5 107 200.2 0.3 0.5

Figure 2. Capacitances

IC, COLLECTOR CURRENT (AMP)

2.0

1.6

1.2

0.4

0.8

00.7 1 2 3 5 107 20

IC, COLLECTOR CURRENT (AMP)VR, REVERSE VOLTAGE (VOLTS)

Figure 3. Current–Gain — Bandwidth Product

Figure 4. DC Current Gain

700

500

1000

3 5 10 1502

300

200

100

IC, COLLECTOR CURRENT (AMP)

Figure 5. “On” Voltages

10 20 30 7050 1001.5

0.3 0.5 10.2

0.7

MJ15002 (PNP)

03 5 1070.1 2

IC, COLLECTOR CURRENT (AMP)

0.2 0.3 0.5

TJ = 25

VBE @ VCE = 2 Vdc

VCE(sat) @ IC/IB = 10

V, VOLTAGE (VOLTS)

TJ = 100

100

2.0

1.6

1.2

0.4

0.8

00.7 1 2 3 5 107 200.2 0.3 0.5

TJ = 100

hFE, DC CURRENT GAIN

VCE = 2 Vdc

TJ = 25

VCE = 10 V

ftest = 0.5 MHz

Cib

MJ15001 (NPN)

TJ = 25

MJ15001 (NPN)

MJ15002 (PNP)

hFE, DC CURRENT GAINV, VOLTAGE (VOLTS)

100

200

100

200

C, CAPACITANCE (pF)

Cib

Cob

MJ15001 MJ15002

VCE = 2 Vdc

TJ = 100

VBE @ VCE = 2 Vdc

TJ = 25

100

VCE(sat) @ IC/IB = 10

TJ = 100

TYPICAL CHARACTERISTICS

 

4 Motorola Bipolar Power Transistor Device Data

PACKAGE DIMENSIONS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. ALL RULES AND NOTES ASSOCIATED WITH

REFERENCED TO–204AA OUTLINE SHALL APPLY.

STYLE 1:

PIN 1. BASE

2. EMITTER

CASE: COLLECTOR

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A1.550 REF 39.37 REF

B––– 1.050 ––– 26.67

C0.250 0.335 6.35 8.51

D0.038 0.043 0.97 1.09

E0.055 0.070 1.40 1.77

G0.430 BSC 10.92 BSC

H0.215 BSC 5.46 BSC

K0.440 0.480 11.18 12.19

L0.665 BSC 16.89 BSC

N––– 0.830 ––– 21.08

Q0.151 0.165 3.84 4.19

U1.187 BSC 30.15 BSC

V0.131 0.188 3.33 4.77

–T–

SEATING

PLANE

2 PLD

0.13 (0.005) Y M

0.13 (0.005) T

–Q–

–Y–

CASE 1–07

TO–204AA (TO–3)

ISSUE Z

How to reach us:

USA /EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,

P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315

MFAX: RMFAX0@email.sps.mot.com – T OUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,

and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different

applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does

not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in

systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of

the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such

unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless

against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.

Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .

MJ15001/D

*MJ15001/D*

◊