4 2 CP | REVISIONS NOTES: LTR DESCRIPTION DATE INCHES 'BS U1| REVISED PER ECO11005139 29MAR11 1. ALL DIMENSIONS ARE IN . [MILLIMETERS] [GRAMS] 2. DIMENSIONS APPEARING IN TABLE ARE AS FOLLOWS: d AS SUPPLIED b AFTER UNRESTRICTED RECOVERY 0.12 [,1] DIA VENT port /A\ 0.18 [4,6] DIA INJECTION PORT / /\. COATING (ADHESIVE) IS OPTIONAL. - J DIA 2 I AS SUPPLIED DIMENSIONS APPEARING IN TABLE ARE FOR UNCOATED PARTS. | S WHEN COATING IS ADDED, ENTRY { DIAMETERS WILL BE REDUCED BY .06 MAX. MOLDING PORTS ARE OPTIONAL. AS SUPPLIED WHEN OO MODIFICATION NUMBER IS SPECIFIED MOLDING PORTS WILL BE LOCATED AS SHOWN. AFTER UNRESTRICTED RECOVERY ON SIZES 2224111 AND 222A121 TABLE OF DIMENSIONS THE 0.18 INCH DIAMETER MOLDING PORT AT "T WILL BE ELIMINATED. THE 0.12 DIA MOLDING H J P R S T U JO W C* WEIGHT DESCRIPTION | -3-4-5.-8 4 3-4 5-8 y +10% | +10% +10% | +10% | +10% | +10% | +20% | +10% | +5% REF S. WEIGHT SHOWN IN TABLE OF DIMENSIONS 12,-25,-100 ~6,-25 ~100 IS BASED ON POLYOLEFIN PART d 0 b C C d p p p p d p OAT 70 43 31 70 43 39 15 68 79 61 45 17 04 .002 6. ORDERING INFORMATION 222M1XX XX XX /XXX /0 [17,8] |[10,9]| [7,97 |[17.81/[10,91| [9.97 | (3.87 | 017.37 | 20.17 | c15.57 | N* | e11,47 | 4.37 fr1027) 18 | 8 | [o,91] 500 A1 04 .98 63 40 98 63 71 21 84 .89 65 58 23 .O5 .003 BASE PART NUMBER [24,9]|[16,0]|[10,2] |[24,9]][16,0]|[18,0]| (5.3) | 27.3] | [22,.6]| (16.5) | N/* |o14.77 | 5.87 | c1.37 | 18 | 8 | [1,36] 1.18 83 56 | 1.18 83 81 25 1.06 1.05 73 75 70 28 .06 .006 MATERIAL DASH NUMBER 222M152 [30,0] ] [21,1] |14,2] |[30,0]| [21,1] |[20.6]| [6.4] | [26,9] | (26.7]) [18,5] | [19.1] | [17.8] [7.1] | [1,5] | 18 90 [2,72] ~5 POLYOLEFIN, SEMI RIGID (RT~301) ODA AD 1.28 90 68 | 1.28 90 90 27 1.44 1.20 81 75 98 40 .O7 014 4 POLYOLEFIN, FLEXIBLE (RT-1304) [32,5]|/[22,9]|17,3] |32,5]| [22,9]/[22,9]] [6,9] | [36,6] | 30,5]| [20,6] ] [19,1] |[24,9] | [10,2] ] [1.8] | 18 | % | [6,35] 5 ELASTOMER, FLEXIBLE (RT501) DDO M159 1.42 | 1.08 | .86 | 1.42 | 1.08 | 1.04 | .33 | 1.72 1.38 20 75 1.18 50 .O7 .019 ~6 SILICONE (RT-602) [36,1] |[27,4]|[21,8]|[36,.1]/[27,.4]|[26.4]] [8.4] | [43,7] | [35.1] ] [22,9] ) [19,1] |[30,.0] | [12,7] ] [1.87 | 18 | 9% | s,627 ~8 POLYOLEFIN, SPACE (RT-1308) DDD MIES - 12s 22 =, 22s 3s Ze ot oe 2 veo | oo 028 43,9]|[28,4]/[27,.4]1[43.9]|/[28.4]|[27.4]| [9.4 53,6 43,9]| [29,2] | [19,1 34,0 17,3 2,0 13,15 12 FLUORO ELASTOMER, FLEXIBLE (RT1312) DOOM TA 2.09 | 1.90 | 1.33 | 2.09 | 1.90 | 1.84 | .59 2.98 2.08 | 1.34 | 1.00 2.10 1.26 13 O77 25 ELASTOMER, FLUID RESISTANT (RT-1325) [53,1] /[48,3]/[33,.8]|(53.1]/[48,311[46,7]/[15,0] | 75.71] | 52,8]| [34,0] ] [25.4] |[53,.3] | [32,0]| [3.3] | 18 | 8 |ps4,93] 100 POLYOLEFIN, SEMI-FLEXIBLE ZEROHAL (RT1323) SODA BS 2.66 | 2.30 | 1.74 | 2.66 | 2.30 | 2.14 | .80 3.84 2.60 | 1.66 1.00 2.80 1.60 15 143 _ >, | 180 | 90 MODIFICATION NUMBER (67,6]|/[58,4]|[44.2]|[67.6]|[58,4]/[54.4]|[20,3]| [97.51] | [66.0] | [42.2] | [25,4] |[71,1] | [40,6]] [3.8] [64,86] DDD A196 3.45 | 2.71 | 218 | 3.45 | 2.71 | 2.48 | .92 5.04 3.12 1.93 | 1.00 3.45 2.22 18 .310 ADHESIVE SLASH NUMBER [87,6]|/[68,8]|[55,4]|[87.6]|[68,8]/[63,0]|[23,4] |[128,0]| [79,2]| [49,0] | [25,4] |[87.6] | (56,4]| 4,6] | 18 | 9% |6140,6) SEE COMPATIBILITY CHART BELOW TOMER DRAWIN COLOR DESIGNATOR CUS G IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. CHECK FOR THE LATEST REVISION. UNLESS OTHERWISE SPECIFIED DRAWN DIMENSIONS ARE INCHES. METRIC Ga=D> - Raychem Molded Parts DIMENSIONS ARE IN BRACKETS. YUNGUYEN =, TE Connectivity 305 Constitution Dr COMPATIBILITY CHART DECIMAL TOLERANCES Menlo Park, CA 94025 MATERIAL DASH NO. ADHESIVE (COATING) SLASH NO. ADHESIVE (COATING) S NO. XXX + 0.005 [013 mm] APPROVED TLE . . [o. mm] -3, -4 /42; /86 S=1017; _ S-1048; x 4 or to50 mm | = DHURRELL BOOT, 9O DEGREE, 9 /42 S-1017 ANGLE TOLERANCE 6; -8; -12 NOT APPLICABLE N/A ATES HIRD ance TAIN WALL 25 /42; /86; _/225 S-1017; S-1048; _S-1206 AVEND TH DRAWING AT ANY TIME. USERS | PROSECTION SIZE | CODE IDENT. NO.) DG. NO. ~100 /36; /180; /184 S-1017; S-1030 PRODUCT FOR THEIR APPLICATION. B | 06090 222A11 1thru196 2004 ,2011 Tyco Electronics Corporation,a TE Connectivity Ltd.company. All rights reserved. | DO NOT SCALE THIS DRAWING | SHEET 1 OF 1 | a 2 | \