Product Datasheet 2.1.1
Conan OCC8001-02
THE D2B PROTOCOL
The Digital Data Bus (D2B) is a
networking protocol for automotive
multimedia data communication
integrating digital audio, video and
other high data rate synchronous or
asynchronous signals, with the
control data for network
management protocols and APIs.
The protocol enables robust single
cable interconnection and
compatible interoperation of in-car
AV multimedia and ITS devices, such
as Radio Head Units, CD Changer,
CD-ROM, GPS Navigation, Voice
Control, Car Telephones, TV and
others.
CONAN® - OCC8001-02
The OCC8001-02 transceiver is a pin
compatible successor of the
OCC8001-01 with identical
functionality, featuring decreased
power and reduced EMI
The CONAN® is an advanced CMOS
device which enhances network
design by integrating source data
routing and communication protocol
management. handles multiple
source data channels via common
serial interface standards,
CONTROL PORT
Device control is handled via the
control port, which can be
configured as either an I2C or SPI
compliant interface. The choice of
interface is specified during hardware
resets.
NETWORK INTERFACE
Data is organized in frames which are
transmitted at the system sampling
frequency. Frames contain source
and control information and are
further divided into sub-frames of 8
bytes fields. At the physical level, data
is transferred as serial bits with bi-
phase encoding.
§ Fully compliant with D2B Mode0
Protocol
§ 4.2336Mbps source data rate
(equivalent to 3 x 16bit stereo
audio channels)
§ Integration of source and control
data
§ Multiple source data channels
§ SPDIF audio port
§ I2C and SPI compatible control
port
§ Flexible source data routing
§ Implements all low-level
communication tasks:
§ Communication Protocol (sub-
frames, synchronisation,...)
§ Communication Management
(CRC, ACK, NAK, retries,...)
§ Transparent channels
§ Easy hardware and software
implementation
§ Few external components
required
LCD DISPLAY
RADIO
HEAD-UNIT
VOICE I/O
GPS ENGINE
DVD PLAYER
VEHICLE
EMERGENCY
SYSTEM (VEMS)
MOBILE
TELEPHONE
FIXED TELEPHONE
HANDSET
DSP AMPLIFIER
CD-CHANGER
Electrical Bypass
TransmitterNetwork Receiver
Source
Data
Router
Source Data In 1
Source Data In 2
Source Data Out 1
Source Data Out 2
Oscillator
Source Data In 0 Source Data Out 0
SPDIF In SPDIF Out
Clock Manager
Audio Sync
PLL
I2C/SPI Interface
Control Unit
Control Port
/RST
VDDA
GNDA
SCK
FSY
RMCK
SX2
SX1
/CS SDOUTSDIN SCL /INT ERROR
SER_OUT
SER_IN
GNDD
VDDD
VREF
FILT
XTI
XTO
SR2
SR1
SR0
RX
SX0
TX
AD1 AD0 SDA SCL
For SPI
For I2C : Block Diagram
© Copyright 1998-2000 Communication & Control Electronics Limited Proprietary. All Rights reserved.
The C&C Electronics logo, the word 'Conan', the word ‘Super Conan’, the word ‘Cayuga’ and the Conan and Super Conan logos are
registered trademarks of C&C Electronics. The word 'D2B' and the D2B logo are trademarks of Philips Electronics NV.
All other trademarks used are proprietary of their respective owners.
C&C Electronics reserves the right to change this product and its specification without prior notice.
D2B Protocol Mode0
Data Rate @ ƒs 44.1kHz
§ Gross Data Rate Max. 11.2 Mb/s
§ Synchronous Data Max. 4.6 Mb/s
§ Control Data Max. 176 Kb/s
Line Coding Manchester
Topology Ring
Max. nr. of Nodes 24
Ultra Low Jitter >80pS/node
Control Port I2C100 kHz
SPI 100 kHz
ESD Protection +/- 4 kV HB model
+/- 400 V M model
Power Consumption <500mW @ 5.5V
Supply Voltage 5V ± 10%
Temperature Range -400C to +850C
Package 28 SOIC
Control data is constructed into a
control frame, which is transferred at
a rate of two bits per sub-frame. The
control frame comprises 128 bits
and requires a block of 48 frames to
transmit.
SOURCE DATA PORTS
Six source data ports are provided,
giving the flexibility for multiple data
sources and destinations to be
handled by a single CONAN®.
All data ports share a common frame
synchronization and serial bit clock.
Data can be arranged as Philips I2S,
Sony or Matsushita, 16 or 24 bit serial
formats. Additionally, SR0 and SX0 can
be configured for operation as an
IEC-958 (or SPDIF) interface. Source
and destination data is routed
between the source data ports and
the network interface via the Routing
Information Table. This allows all data
bytes coming from either the network
receiver or source input ports to be re-
arranged, mixed and re-directed to
the network transmitter or source
output ports.
Order-information for Conan
Part: Order number:
Conan OCC8001-02 2-02-001-01
For further information on any other C&C Electronics products,
please visit our Web site or contact us:
http://www.candc.co.uk
Communication & Control Electronics Limited
2 Occam Court, Occam Road
The Surrey Research Park
Guildford, Surrey. GU2 7YQ
United Kingdom
Tel: +44-1483-540-222
Fax: +44-1483-540-200
Email: helpdesk@candc.co.uk
D0 D1 D2 D3 D4 D5 D6 D7
D8 D9 11 12 13 14 1510
D0 D1 D2 D3 D4 D5 D6 D7
D8 D9 11 12 13 14 1510
D0 D1 D2 D3
D4 D5 D7D6
D0 D1 D2 D3
D4 D5 D7D6
L
R
R
L
L
R
R
L
D0 D1 D2 D3
D4 D5 D7D6
D0 D1 D2 D3
D4 D5 D7D6
R
L
R
L
D0 D1 D2 D3
D4 D5 D7D6
D0 D1 D2 D3
D4 D5 D7D6
R
L
R
L
RX
SR0
SR1
SR2 SX2
SX1
SX0
TX
64-bit
input
shift
register
32-bit
input
shift
register
64-bit
output
shift
register
32-bit
input
shift
register
32-bit
input
shift
register
32-bit
output
shift
register
32-bit
output
shift
register
32-bit
output
shift
register
Source Data Bypass
Electrical Bypass
CONAN® RIT Table
L
aC
E
H
D
B
E*
A
A1
C C E
CONAN
OCC8001-2
XXYYZZZ
Pin 1 Pin 28
Dim Min. (mm) Max. (mm)
A2.35 2.65
A1 0.10 0.30
B0.35 0.49
C0.23 0.32
D17.70 18.10
E7.40 7.60
E* 1.27
H10.00 10.65
H* 0.25 0.75
L0.40 1.27
a 0 8
CONAN
® Package Outline
