LBT CONNECTOR A Type
Disconnectable Crimp style connectors
Emboss Tape
3
9.9
Circuit No.1
Header outline
±0.05
4.8 ±0.05
1.55
±0.05
2.05
±0.05
5.65
0
+0.1
Ｒ0.25
±0.05
2.75
±0.05
2.9
±0.05
2.5
±0.05
1.25
±0.05
1.2
0
+0.1
0.5
0
+0.1
1
±0.05
A
±0.05
1.5
±0.05
1.5
±0.05
B
±0.05
C
±0.05
1
±0.05
0.6
1
This connector is for connecting the lithium
polymer battery or for connecting DC-IN,
and has the sequence structure for
connection to the power supply circuit in
preference to connection to the signal
circuit by dividing the signal circuit and
power supply circuit clearly. Moreover, this
is the low profile connector (space saving)
for applying the high current by adopting
the heat radiation structure.
Specifications –––––––––––––––––––
• Current rating: Signal circuit/ 0.5 A AC, DC (AWG #28)
Power supply circuit/ 7.0 A AC, DC (AWG #20)
• Voltage rating: 50 V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Signal circuit
Initial value/ 20 mΩmax.
After environmental tests/ 40 mΩmax.
Power supply circuit
Initial value/ 15 mΩmax.
After environmental tests/ 30 mΩmax.
• Insulation resistance: 100 MΩmin.
• Withstanding voltage: 500 VAC/minute
• Applicable wire: Signal circuit
Conductor size/ AWG #28
Insulation O.D./ 0.6 to 0.8 mm
Power supply circuit
Conductor size/ AWG #28 to #20
Insulation O.D./ 1.11 to 1.44 mm
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
Standards–––––––––––––––––––––––
0Recognized E60389
• Connector for power supply (7A)
• Low profile (Space saving)
• Hybrid model of Signal circuit
+ Power supply circuit
• Heat radiation structure
• Sequence structure
• High-strength
• Check of incomplete mating
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative:
±
0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details.
PC board layout and Assembly layout
2
LBT CONNECTOR A Type
Model No. mm2AWG #
Insulation
O.D. (mm)
Applicable wire Q'ty/
reel
Power supply
Signal
SLBTAD-01T-M0.5
SSH-003T-P0.2-H
0.22〜0.5
0.08
24〜20
28
1.11〜1.44
0.6〜0.8
7,000
23,000
Material and Finish
Power supply: Copper alloy, tin-plated (reflow treatment)
Signal: Phosphor bronze, tin-plated (reflow treatment)
1.45
5.9
2.9
2.6
1.20.6
1.35
0.8
3.9
1.62
0.80.5
0.45
1.7
Circuits
Power
supply Signal Model No.
2
7
5
3
1
LBTAR-09V-2K-K(HF)
LBTAR-07V-2K-K(HF)
LBTAR-05V-2K-K(HF)
LBTAR-03V-2K-K(HF)
Material
PBT, UL94V-0
D
6.0
4.0
2.0
-
15.1
13.1
11.1
9.1
2,000
2,000
3,000
3,000
C
Q’ty/
bag
Dimensions (mm)
9.45
7.45
5.45
3.45
B
Circuit No.1 mark
7.45
3
B
C
D
Contact
RoHS compliance
Housing
RoHS compliance
Circuits
Power
supply Signal Model No.
2
7
5
3
1
SM09B-LBTAKS-TD-N2T-K(HF)
SM07B-LBTAKS-TD-N2T-K(HF)
SM05B-LBTAKS-TD-N2T-K(HF)
SM03B-LBTAKS-TD-N2T-K(HF)
D
6.0
4.0
2.0
-
15.1
13.1
11.1
9.1
1,500
1,500
1,500
1,500
C
Q'ty/
reel
Dimensions (mm)
9.45
7.45
5.45
3.45
B
14.2
12.2
10.2
8.2
A
Material and Finish
Signal contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Power supply contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Housing: Heat resisting resin, UL94V-0
Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
JST
K-A
0.8
30.8
A
B
C
1
0.256.55
Header
RoHS compliance
Note: The products listed above are supplied on embossed-tape.
Contact Crimping
machine
MKS-L
-
MKS-L-10-3
*MKS-SC
MK/SLBTAD-01-05
-
MK/SSH/L-003-02
SC/SSH/L-003-02
Applicator
Crimpapplicator Dies
APLMK SLBTAD01-05
-
APLMK SSH/L003-02
APLSC SSH/L003-02
Crimp applicator with dies
SLBTAD-01T-M0.5
SSH-003T-P0.2-H
AP-K2N
AP-K2N
1.11〜1.44
0.6〜0.8
mm2AWG #
Insulation
O.D. (mm)
Applicable wire
0.22〜0.5
0.08
24〜20
28
Note: 1. *Strip-crimp applicator
Contact JST for applicable wires in case that it is not usable due to wire size.
2. Contact JST for fully automatic crimping applicator.
Power supply
Signal