40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range 0.01 – 1 GHz
Insertion Loss (max) 1.2 dB
VSWR (max) 50 ohms 1.5 ratio
Isolation (min) 75 dB
Switching Speed (max) 250 nsec
CW RF Power, Operating (max) 1 W
Specifications:
Features:
• Incorporated TTL-compatible driver for
convenient system integration and operates
from +5V and -15V DC power supplies.
• DC blocks at all RF ports.
• Ruggedized construction.
• RoHS-compliant versions available.
• Hermetic versions available.
Revision Date: 1/25/2011
S2H3R Pin Diode Switch
Single Pole, Two Throw
Reflective
Notes:
DC Bias: +5V +/-0.5V @ 80 mA max
(Standard) -15V +/-3V @ 50 mA max
DC Bias: +5V +/-0.5V @ 100 mA max
(-5 option) -5V +/-0.5V @ 60 mA max
DC Bias: +15V +/-3V @ 80 mA max
(-12 option) -15V +/-3V @ 50 mA max
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55 °C to +85 °C
Storage Temp: -65 °C to +125 °C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Mechanical Specifications:
Case Styles: S2 Outline (Two bit control)
S2-1 Outline (Single bit control)
Finish: Gold Plate per MIL-G-45204
Chem film per MIL-C-5541
Bias & Control Pins: ø0.02” x 0.15” long
Weight: 20 g max
Mounting: ø0.10” through holes
(4) places
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the-
factory to discuss your screening requirements.
E1=0: J2 – J1 Low Loss,
E1=1: J3 – J1 Low Loss,
J3 – J1 Isolation
J2 – J1 Isolation
Single Bit Control:
(-1 option)
Aeroflex Control Components reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an authorized
sales representative to verify that the information in this data sheet is current before
using this product. Aeroflex does not assume any responsibility or liability arising
out of the application or use of any product or service described herein, except as
expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a
product or service from Aeroflex convey a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2011 Aeroflex Control Components. All rights reserved.
www.aeroex.com/Microwave www.aeroex.com/ACC
Aeroflex Control Components
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
ACC-sales@aeroflex.com
ISO 9001:2008 certified
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 1/25/2011
Outline Drawing:
OUTLINE CASE STYLE S2 OUTLINE CASE STYLE S2-1
0.90
0.45
2-PLS
0.150 4-PLS
0.30
0.38
REF
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
SMA FEMALE
3-PLS
0.35
0.15
1.20
0.60
0.15
0.10
Ø0.100 THRU
MOUNTING HOLE
4- PLS.
1.000
MODEL NUMBER
0.700
0.10
0.90
0.45
2-PLS
0.150 4-PLS
0.30
0.38
REF
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
SMA FEMALE
3-PLS
0.35
0.15
1.20
0.60
0.15
0.10
Ø0.100 THRU
MOUNTING HOLE
4- PLS.
1.000
MODEL NUMBER
0.700
0.10
J2
E1
ACC
E2
-V
+V
G
J3
J1
SN: DC:
0000 WWYY
J2
N/C
ACC
E1
-V
+V
G
J3
J1
SN: DC:
0000 WWYY
Part Number Ordering Information:
• Add “-RC” suffix: RoHS-compliant
• Add “-H” suffix: Hermetic seal
• Add “-5” suffix: +/-5V DC supplies
• Add “-5-RC” suffix: +/-5V DC supplies, RoHS-compliant
• Add “-5-H” suffix: +/-5V DC supplies, Hermetic seal
• Add “-12” suffix: +/-15V DC supplies
• Add “-12-RC” suffix: +/-15V DC supplies, RoHS-compliant
• Add “-12-H” suffix: +/-15V DC supplies, Hermetic seal
• Add “-1”: Single bit logic control
• Add “-1-RC” suffix: Single bit logic control, RoHS-compliant
• Add “-1-H” suffix: Single bit logic control, Hermetic seal
• Add “-1-5” suffix: Single bit logic control, +/-5V DC supplies
• Add “-1-5-RC” suffix: Single bit logic control, +/-5V DC supplies,
RoHS-compliant
• Add “-1-5-H” suffix: Single bit logic control, +/-5V DC supplies,
Hermetic seal
• Add “-1-12” suffix: Single bit logic control, +/-15V DC supplies
• Add “-1-12-RC” suffix: Single bit logic control, +/-15V DC
supplies, RoHS-compliant
• Add “-1-12-H” suffix: Single bit logic control, +/-15V DC supplies,
Hermetic seal