AC002021 - Microchip Technology

Micr ochip Development Systems

Ordering Guide

June 2005

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR WAR-

RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,

WRITTEN OR ORAL, STATUTORY OR OTHERWISE,

RELATED TO THE INFORMATION, INCLUDING BUT NOT

LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,

MERCHANTABILITY OR FITNESS FOR PURPOSE.

Microchip disclaims all liability arising from this information and

its use. Use of Microchip’s products as critical components in

life support systems is not authorized except with express

written approval by Microchip. No licenses are conveyed,

implicitly or otherwise, under any Microchip intellectual property

rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accuron,

dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART,

PRO MATE, PowerSmart, rfPIC, and SmartShunt are

registered trademarks of Microchip Technology Incorporated

in the U.S.A. and other countries.

AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB,

PICMASTER, SEEVAL, SmartSensor and The Embedded

Control Solutions Company are registered trademarks of

Microchip Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, dsPICDEM,

dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR,

FanSense, FlexROM, fuzzyLAB, In-Circuit Serial

Programming, ICSP, ICEPIC, Linear Active Thermistor,

MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,

PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo,

PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode,

Smart Serial, SmartTel, Total Endurance and WiperLock are

trademarks of Microchip Technology Incorporated in the

U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2002 quality system certification for

its worldwide headquarters, design and wafer fabrication facilities in

Chandler and Tempe, Arizona and Mountain View, California in

October 2003. The Company’s quality system processes and

procedures are for its PICmicro

8-bit MCUs, KEELOQ

code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

© 2005 Microchip Technology Inc. DS30177T-page iii
Table of Contents
INTRODUCTION ........................................................................................................................1
About Microchip Development Tools  .......................................................................................................... 2
Microchip Technology Service and Support ................................................................................................ 2
Microchip Internet Connections ................................................................................................................... 3
SOFTWARE ...............................................................................................................................5
MPLAB® Integrated Development Environment (IDE) ................................................................................ 6
MPLAB® IDE Visual Device Initializer Software .......................................................................................... 7
Application Maestro™ Software .................................................................................................................. 8
MPLAB® C18 C Compiler  ........................................................................................................................... 9
MPLAB® C30 C Compiler  ......................................................................................................................... 10
dsPIC30F DSP Library .............................................................................................................................. 11
dsPIC30F Math Library  ............................................................................................................................. 12
dsPIC30F Peripheral Library ..................................................................................................................... 13
dsPIC30F Soft Modem Library .................................................................................................................. 14
dsPIC30F Speech Recognition Library  ..................................................................................................... 15
dsPIC30F Noise Suppression Library  ....................................................................................................... 16
dsPIC30F Acoustic Echo Cancellation Library .......................................................................................... 17
dsPIC® DSC Symmetric Key Embedded Encryption Library  .................................................................... 18
dsPIC® DSC Asymmetric Key Embedded Encryption Library  .................................................................. 19
dsPIC30F Speech Encoding/Decoding Library ......................................................................................... 20
dsPICworks™ Data Analysis and DSP Software ...................................................................................... 21
Digital Filter Design/Digital Filter Design Lite  ............................................................................................ 22
CMX-MicroNet™ for dsPIC30F Devices  ................................................................................................... 23
CMX-RTX™ for dsPIC30F Devices  .......................................................................................................... 24
CMX-Scheduler™ for dsPIC® DSC Devices ............................................................................................. 25
CMX-Tiny+™ for dsPIC30F Devices  ........................................................................................................ 26
FilterLab® Active Filter Software Design Tool ........................................................................................... 27
Total Endurance™ Software Model  .......................................................................................................... 28
KEELOQ® Security ICs License CD  ........................................................................................................... 29
HARDWARE ............................................................................................................................31
MPLAB® ICD 2 In-Circuit Debugger  ......................................................................................................... 32
MPLAB® ICD 2 Accessories  ..................................................................................................................... 33
PICSTART® Plus Development Programmer  ........................................................................................... 34
PICkit™ 1 Flash Starter Kit  ....................................................................................................................... 35
rfPIC® Development Kit 1  ......................................................................................................................... 36
PIC10F2XX Programmers/Adapters  ......................................................................................................... 37
Signal Analysis PICtail™ Daughter Board  ................................................................................................ 38
Ethernet PICtail™ Daughter Board  ........................................................................................................... 39
PICkit™ 2 Starter Kit ................................................................................................................................. 40

Development Systems Ordering Guide
DS30177T-page iv © 2005 Microchip Technology Inc.
EMULATION ............................................................................................................................41
MPLAB® ICE 2000 Modular In-Circuit Emulator  ....................................................................................... 42
MPLAB® ICE 4000 Modular In-Circuit Emulator  ....................................................................................... 43
MPLAB® ICE 2000/4000 Replacement Accessories  ................................................................................ 44
Ordering Information  ................................................................................................................................. 45
PROGRAMMING .....................................................................................................................47
MPLAB® PM3 Universal Device Programmer  .......................................................................................... 48
In-Circuit Serial Programming™ (ICSP™) Socketfor PRO MATE® II Device Programmer  ...................... 49
Programmer Adapter Kits and Accessories  .............................................................................................. 50
PICmicro® MCU DEMO BOARDS AND KITS ........................................................................51
PICDEM™ Demonstration Boards ............................................................................................................ 52
PICDEM™ 2 Plus Demonstration Board ................................................................................................... 53
PICDEM™ 4 Demonstration Board ........................................................................................................... 54
PICDEM™ 18R Demonstration Kit  ........................................................................................................... 55
PICDEM™ Mechatronics Demonstration Kit ............................................................................................. 56
PICDEM™ MC Development Board  ......................................................................................................... 57
PICDEM™ MC LV Development Board .................................................................................................... 58
PICDEM™ HPC Explorer Board  ............................................................................................................... 59
PICDEM™ USB Demonstration Kit ........................................................................................................... 60
PICDEM™ FS USB Demonstration Board ................................................................................................ 61
PICDEM™ LCD Demonstration Board  ..................................................................................................... 62
PICDEM™ Z 2.4 GHz Demonstration Kit .................................................................................................. 63
PICDEM™ CAN-LIN Demonstration Boards  ............................................................................................ 64
PICDEM™ LIN Demonstration Kit  ............................................................................................................ 65
PICDEM.net™ Demonstration/Evaluation Board ...................................................................................... 66
Low-Power Solutions Demonstration Board  ............................................................................................. 67
dsPIC® DSC DEVELOPMENT BOARDS, KITS  .....................................................................69
dsPICDEM™ Starter Development Board  ................................................................................................ 70
dsPICDEM™ 28-Pin Starter Development Board .....................................................................................71
dsPICDEM™ 1.1 General Purpose Development Board .......................................................................... 72
dsPICDEM™ 2 Development Board  ......................................................................................................... 73
dsPICDEM™ MC1 Motor Control Development Board ............................................................................. 74
dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards  ...................................... 75

© 2005 Microchip Technology Inc. DS30177T-page v
Table of Contents
ANALOG AND MIXED-SIGNAL DEMO BOARDS AND KITS  ...............................................77
PICDEM™ MSC1 Demonstration Kit  ........................................................................................................ 78
PICDEM™ MSC1 Daughter Boards  ......................................................................................................... 79
MCP41XXX/42XXX Digital Potentiometer Evaluation Board  .................................................................... 80
MXDEV® 1 Analog Evaluation System Driver Board  ................................................................................ 81
MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit .................................... 82
MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit .................................... 83
Fan Controllers and Serial Temperature Sensor Demo Boards  ............................................................... 84
MCP2510 CAN Developer’s Kit  ................................................................................................................ 85
MCP250XX CAN I/O Expander Developer’s Kit  ....................................................................................... 86
MCP2120/2150 Infrared Developer’s Kit ................................................................................................... 87
SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit  ............................................................ 88
13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360  ..................................... 89
13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X  .................. 90
Interface Products  ..................................................................................................................................... 91
Linear Products  ......................................................................................................................................... 91
Linear Products (Cont.)  ............................................................................................................................. 92
Mixed-Signal Products  .............................................................................................................................. 92
Power Management Products ................................................................................................................... 93
Power Management Products (Cont.) ....................................................................................................... 93
Thermal Management Products ................................................................................................................ 94
Thermal Management Products (Cont.) .................................................................................................... 94
Analog Software Tools  .............................................................................................................................. 95
KEELOQ® SECURITY ICs EVALUATION KIT  .........................................................................97
KEELOQ® Security ICs Evaluation Kit II ..................................................................................................... 98
BATTERY MANAGEMENT  .....................................................................................................99
PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell 
Lithium Ion/Polymer Chemistries  ............................................................................................................ 100
PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell 
Lithium Ion/Polymer Chemistries  ............................................................................................................ 101
CROSS REFERENCE  ...........................................................................................................103
Index.......................................................................................................................................141
Worldwide Sales and Service ..............................................................................................146

Development Systems Ordering Guide

NOTES:

This section contains the following major topics:

About Microchip Development Tools...........................................................................................2

Microchip Technology Service and Support ................................................................................2

Microchip Internet Connections...................................................................................................3

INTRODUCTION

Development Systems Ordering Guide

About Microchip

Development Tools

With more than 300,000 development tools installed

worldwide, Microchip is well known for the seamless

integration of their tools with the intuitive MPLAB®

Integrated Development Environment (IDE), for the

breadth of products that cover all stages of the product

development cycle, and for the highest level of support

and service. Microchip’s development tools provide

faster time to market and lower total system cost for

engineers, clearly offering a competitive advantage to

using Microchip silicon solutions.

This ordering guide covers several new development

tools, including the PICkit™ 2 Flash Starter Kit, the

PICDEM™ Z 2.4GHz Demonstration Kit, the PICDEM

Full-Speed USB Demonstration Board and the

PICDEM HPC Explorer Board. For more detailed and

current information, please visit Microchip’s web site at

www.microchip.com.

Microchip Technology

Service and Support

Quality

Microchip Development Systems is continuously

improving design and manufacturing processes to

ensure high quality products.

Warranty

Development system products are warranted against

defects for one (1) year (90 days for products that we

normally sell for $500 or less (USD), excluding

promotional pricing).

Upgrades

Software upgrades are available free-of-charge from

the Microchip web site (www.microchip.com).

Hardware enhancements are also available

free-of-charge or at a nominal fee. Contact your local

distributor for more information.

Service

Prompt system service is essential as customers

depend on our systems to design and program

PICmicro® Microcontrollers and dsPIC® Digital Signal

Controllers (DSC). Defective components are typically

replaced within 48 hours. Microchip’s Service Center in

Tempe, Arizona serves customers in the US and

Canada. Our European Service Center in Dublin

provides service to customers in Europe, the Middle

East and Africa. The Far East sales offices provide

these services directly.

Introduction

Microchip Internet Connections

On-Line Support

Microchip provides many avenues of on-line support

on the Microchip web site at:

www.microchip.com

Users may download files for the latest development

tools, data sheets, application notes, user’s manuals,

articles and sample programs. Microchip-specific

business information is also available, including

contact information for all Microchip sales offices and

distributors.

The MPLAB® Integrated Development Environment

(IDE) software can be downloaded free-of-charge.

MPLAB IDE includes a project manager, assembler/

linker and simulator debugger for embedded system

development. Additional tools are available for

purchase for device programming, in-circuit debugging,

and C compiling. MPLAB IDE is the development

environment for most of the Microchip development

tools listed in this guide.

Development tools, Microchip PICmicro® MCU

devices, dsPIC® DSC devices, Analog/Interface and

Memory devices are available on the web site for

purchase with a credit card and delivery in the U.S.,

Canada or Europe.

The following are some of the many services

available on the web site:

• Latest data sheets, application notes and user

manuals

• Device errata

• Technical support section with FAQs

• Device programming specifications

• Latest file updates for demonstration and

evaluation kits

• Design tips

• Subscription to Microchip Change Notification

service for silicon and development tools

• Microchip consultant program member listing

• Third party tools contacts

• Web seminars

• Listing of field seminars and upcoming events

• Conferences for products, development systems,

technical information and more

• University Corner

• Latest Microchip press releases

• Job postings

• Links to other useful web sites related to Microchip

products

Development Systems Ordering Guide

NOTES:

© 2005 Microchip Technology Inc. DS30177T-page 5
This section contains the following major topics:
MPLAB® Integrated Development Environment (IDE) ................................................................6
MPLAB® IDE Visual Device Initializer Software..........................................................................7
Application Maestro™ Software..................................................................................................8
MPLAB® C18 C Compiler ...........................................................................................................9
MPLAB® C30 C Compiler .........................................................................................................10
dsPIC30F DSP Library.............................................................................................................. 11
dsPIC30F Math Library .............................................................................................................12
dsPIC30F Peripheral Library.....................................................................................................13
dsPIC30F Soft Modem Library..................................................................................................14
dsPIC30F Speech Recognition Library .....................................................................................15
dsPIC30F Noise Suppression Library .......................................................................................16
dsPIC30F Acoustic Echo Cancellation Library..........................................................................17
dsPIC® DSC Symmetric Key Embedded Encryption Library....................................................18
dsPIC® DSC Asymmetric Key Embedded Encryption Library..................................................19
dsPIC30F Speech Encoding/Decoding Library.........................................................................20
dsPICworks™ Data Analysis and DSP Software ......................................................................21
Digital Filter Design/Digital Filter Design Lite ............................................................................22
CMX-MicroNet™ for dsPIC30F Devices ...................................................................................23
CMX-RTX™ for dsPIC30F Devices ..........................................................................................24
CMX-Scheduler™ for dsPIC® DSC Devices.............................................................................25
CMX-Tiny+™ for dsPIC30F Devices.........................................................................................26
FilterLab® Active Filter Software Design Tool ...........................................................................27
Total Endurance™ Software Model...........................................................................................28
KEELOQ® Security ICs License CD ...........................................................................................29
SOFTWARE

Development Systems Ordering Guide

MPLAB® Integrated Development Environment (IDE)

MPLAB IDE gives PICmicro

MCU and dsPIC

DSC users the flexibility to edit, compile and

debug from a single user interface.

MPLAB IDE gives PICmicro® MCU and dsPIC® DSC

users the flexibility to edit, compile and debug from a

single user interface. MPLAB Integrated Development

Environment (IDE) is a development platform for the

Microchip Technology PICmicro microcontroller (MCU)

and dsPIC Digital Signal Controller (DSC) families.

Designed for use with the Microsoft Windows®

operating environment, MPLAB IDE offers an

easy-to-use common user interface for the Microchip

development tools suite.

MPLAB IDE includes the following components:

• MPASM™ Assembler

• MPLAB ASM30 Assembler for dsPIC30F

• MPSIM™ Software Simulator

• MPLINK™ Linker

• MPLAB LINK30 Linker for dsPIC30F

• Source-Level Debugger

• On-line Help

• Project and Set-up Wizards

• Project Manager

• Visual Device Initializer (see page 7)

• Programmer’s Editor

• Drivers for hardware tools (as listed in the

Tools Supported section)

• Integration with Source Code Control

The MPLAB IDE desktop provides the development

environment and tools for developing and debugging

applications as a project, providing a common user

interface for different development and debugging

modes.

Features

• Full featured, color-coded text editor

• Easy-to-use project manager with visual display

• Source-level debugging

• Enhanced source level debugging for ‘C’

structures, automatic variables, etc.

• Customizable toolbar and key mapping

• Dynamic status bar displays processor condition

at a glance

• Context sensitive, interactive on-line help

• Integrated MPLAB SIM instruction simulator

• Stand-alone user interface for MPLAB PM3 and

PRO MATE® II device programmers

• User interface for MPLAB ICE 2000 or

MPLAB ICE 4000 In-Circuit Emulator

• User interface for MPLAB ICD 2 In-Circuit Debugger

Ordering Information:

SW007002 MPLAB® IDE (Free download: www.microchip.com)

DS51046 “

MPLAB

IDE Integrated Development Environment Product Overview”

(Available at: www.microchip.com)

FREE

Software

MPLAB® IDE Visual Device Initializer Software

Microchip’s MPLAB IDE Visual Device Initializer allows

users to configure Microchip microcontrollers

graphically, and when configuration is complete, a

mouse click generates code usable in Assembly or ‘C’

programs.

MPLAB IDE Visual Device Initializer does extensive

error checking on assignments and conflicts on pins,

memories and interrupts, as well as a selection of

operating conditions. The generated code files are

seamlessly integrated with the rest of the application

code through the MPLAB IDE project manager.

The detailed reports on resource assignment and

configuration simplify project documentation.

Features

• Drag-and-drop feature selection

• One-click configuration

• Extensive error checking

• Generates initialization code

• Integrates seamlessly in the MPLAB IDE project

manager

• Printed reports ease project documentation

requirements

Ordering Information:

Free download: www.microchip.com (included with MPLAB IDE download)

DS51443

“MPLAB IDE Visual Device Initializer Product Overview”

(Available at: www.microchip.com)

FREE

Development Systems Ordering Guide

Application Maestro™ Software

The Microchip Application Maestro Software is a

stand-alone software tool that allows users to configure

and incorporate a range of pre-written firmware

modules into their applications. Its heart is a collection

of modules developed by Microchip Technology for use

with its PICmicro® microcontrollers. Starting from a

graphic interface, the user selects one or more

available modules, then configures the parameters for

each. When this is complete, the Application Maestro

Software then generates code, that can be

incorporated into the user’s application project, using

MPLAB® IDE or any compatible development

environment.

It is important to note that the Application Maestro

Software is not a plug-in or add-on to the MPLAB IDE

line of development tools; it is a separate item in its

own right. Application Maestro Software also differs

from other librarian systems, such as MPLIB™ Library,

because it does more than archive and manage related

files for a single software project. Instead, it manages a

library of ready-to-configure modules that the user

customizes to their needs, and creates the necessary

files for inclusion in the user’s projects on demand.

Ordering Information:

Free download: www.microchip.com (now included with MPLAB IDE download)

FREE

Software

MPLAB® C18 C Compiler

The MPLAB C18 is a full-featured ANSI-compliant

C compiler for the Microchip Technology PIC18CXXX

family of PICmicro® MCUs. MPLAB C18 is fully

compatible with Microchip’s MPLAB IDE, allowing

source level debugging with both the MPLAB ICE and

the MPLAB SIM Simulator. MPLAB C18 provides a

convenient, project-oriented development environment

that reduces development time.

MPLAB C18 allows code for the PIC18CXXX family to

be written in the high-level ‘C’ language, using powerful

PICmicro MCU libraries, enabling the developer to

devote more time to the application and less time to the

details of the processor.

MPLAB C18 was designed explicitly for the

PIC18CXXX family and allows the use of a software

stack for maximum RAM reusability.

MPLAB C18 provides user-configurable interrupt

support for saving and restoring context during

interrupt handling. Libraries are provided for multiple

memory models. Libraries, precompiled objects and

linker scripts can be included in MPLAB C18 projects,

along with ‘C’ and Assembly source files, for use with

MPLAB C18 make and build functions.

The MPLAB C18 ANSI-compliant C compiler comes

complete with the MPLAB IDE. The IDE allows you to

move quickly between different development and

debugging modes. For example, you can quickly

advance from software debugging with the

MPLAB SIM Simulator to hardware debugging with

MPLAB ICE.

MPLAB C18 has implemented extensions to the ‘C’

language to provide specific support for Microchip’s

PICmicro MCU environment.

MPLAB C18 will run on any 486 or better PC, as a

native 32-bit Windows® 95 or Windows NT®

executable.

MPLAB C18 C Compiler Contents

• MPLAB® C18 C Compiler Software

• MPLAB® IDE Software and Documentation CD

•

“MPLAB

C18 C Compiler User’s Guide”

and

“MPLAB

C18 C Compiler Librarie

”

and

“MPLAB

C18 C Compiler Getting Started”

Manuals

Ordering Information:

SW006011 MPLAB® C18 C Compiler

A 60-day full-featured demo/student edition is available from the Microchip web site at www.microchip.com.

Development Systems Ordering Guide

MPLAB® C30 C Compiler

The MPLAB C30 C Compiler is a fully ANSI-compliant

product with standard libraries for the dsPIC® DSC

architecture. It is highly optimizing and takes

advantage of many dsPIC DSC architecture-specific

features to provide efficient software code generation.

MPLAB C30 also provides extensions that allow for

excellent support of the hardware, such as interrupts

and peripherals. It is fully integrated with the

MPLAB IDE for high-level source debugging.

MPLAB C30 comes complete with its own assembler,

linker and librarian. These allow the user to write Mixed

mode C and Assembly programs and link the resulting

object files into a single executable file.

MPLAB C30 is distributed with a complete ANSI ‘C’

standard library. The library includes functions for string

manipulation, dynamic memory allocation, data

conversion, timekeeping and math functions

(trigonometric, exponential and hyperbolic). The

standard I/O functions for file handling are also

included, and, as distributed, they support full access

to the host file system using the command-line

simulator.

The compiler supports both large and small code and

data models. The small code model takes advantage of

a more efficient form of CALL instructions, while the

small data model supports the use of compact

instructions for accessing data in SFR space.

MPLAB C30 includes a powerful command-line driver

program. Using the driver program, application

programs can be compiled, assembled and linked in a

single step.

MPLAB C30 comes complete with its own assembler,

linker and librarian. These tools allow the user to write

Mixed mode C and Assembly programs and link the

resulting object files into a single executable file.

MPLAB® C30 – dsPIC® C Compiler

MPLAB C30 C Compiler Contents

• MPLAB® C30 C Compiler Software

• MPLAB® IDE Software and Documentation CD

•

“MPLAB

C30 C Compiler User’s Guide”

(on CD)

and Complete Documentation

•

“MPLAB

ASM30, MPLAB

LINK30 and Utilities

User’s Guide”

•

“dsPIC

DSC Language Tools Getting Started” and

“dsPIC

DSC Language Tool Library”

Manuals

Ordering Information:

SW006012 MPLAB® C30 C Compiler

A 60-day full-featured demo is available from the Microchip web site at www.microchip.com.

DS51432

“MPLAB

C30 C Compiler Product Overview”

(Available at: www.microchip.com)

Software

dsPIC30F DSP Library

The dsPIC30F DSP Library provides a set of

speed-optimized functions for the most common digital

signal processing applications. The DSP Library

provides significant performance savings over

equivalent functions coded in ‘C’ and allows

developers to dramatically shorten their development

time.

The DSP Library is written predominantly in Assembly

language and makes extensive use of the dsPIC30F

DSC instruction set and hardware resources, including

X and Y memory addressing, modulo addressing,

bit-reversed addressing, 9.31 saturation and REPEAT

and DO loops. It provides functions for vector, matrix,

filtering, transform and window operations.

Features

• 49 total functions

• Full compliance with the Microchip dsPIC30F C30

Compiler, Assembler and Linker

• Simple user interface – just one library file and one

header file

• Functions are both ‘C’ and Assembly callable

• FIR filtering functions include support for Lattice,

Decimating, Interpolating and LMS filters

• IIR filtering functions include support for Canonic,

Transposed Canonic and Lattice filters

• FIR and IIR functions may be used with the filter files

generated by the dsPIC® DSC Digital Filter Design

Tool

• Transform functions include support for in-place and

out-of-place DCT, FFT and IFFT transforms

• Window functions include support for Bartlett,

Blackman, Hamming, Hanning and Kaiser windows

• Support for Program Space Visibility

• Complete function profile information, including

information

Function Execution Times Table

Function Cycle Count Equation Conditions Number of Cycles* Execution Time @ 30 MIPS

Complex FFT** — N = 64 3739 124.6 μs

Complex FFT** — N =1 28 8485 282.8 μs

Complex FFT** — N = 256 19055 635.2 μs

Block FIR 53 + N(4 + M) N = 32, M = 32 1205 40.2 μs

Block FIR Lattice 41 + N(4 + 7M) N = 32, M = 32 7337 244.6 μs

Block IIR Canonic 36 + N(8 + 7S) N = 32, S = 4 1188 39.6 μs

Block IIR Lattice 46 + N(16 + 7M) N = 32, M = 8 2350 78.3 μs

Matrix Add 20 + 3(C * R) C = 8, R = 8 212 7.1 μs

Matrix Transpose 16 + C(6 + 3(R – 1)) C = 8, R = 8 232 7.7 μs

Vector Dot Product 17 + 3N N = 32 113 3.8 μs

Vector Max 19 + 7(N – 2) N = 32 229 7.6 μs

Vector Multiply 17 + 4N N = 32 145 4.8 μs

Vector Power 16 + 2N N = 32 80 2.7 μs

Legend: C = # columns, N = # samples, M = # taps, S = # sections, R = # rows

* 1 Cycle = 33 nanoseconds @ 30 MIPS.

** Complex FFT routine inherently prevents overflow.

Ordering Information:

SW300022 dsPIC30F DSP Library (Free download: www.microchip.com)

DS51443

“dsPIC30F DSP Library Product Overview”

(Available at: www.microchip.com)

FREE

Development Systems Ordering Guide

dsPIC30F Math Library

The dsPIC30F Math Library is the compiled version of

the math library that is distributed with the highly

optimized, ANSI-compliant dsPIC30F MPLAB® C30

C Compiler (SW006012). It contains advanced single

and double-precision, floating-point arithmetic and

trigonometric functions from the standard ‘C’ header

file <math.h>. The library delivers small program code

size and data size, reduced cycles and high accuracy.

Features

• The math library is callable from either MPLAB C30

or dsPIC30F Assembly language.

• The functions are IEEE-754 compliant, with signed

zero, signed infinity, NaN (Not a Number) and

denormal support and operate in the

“Round-to-Nearest” mode.

• Compatible with MPLAB ASM30 and MPLAB

LINK30, which are available at no charge from

Microchip’s web site.

• Total library memory usage(1,2):

- Code size: 5250 bytes

- Data size: 4 bytes

dsPIC

DSC Math Library Function and Performance

Function Group Function Performance

(Cycles)(1,2,3,4)

Basic Floating Point Addition 122

Subtraction 124

Multiplication 109

Division 361

Remainder 385

Trigonometric and

Hyperbolic

acos 478

asic 363

atan 696

atan2 3206

cos 3249

sin 2238

tan 2460

cosh 1049

sinh 525

tanh 338

Logarithmic and

Exponential

exp 530

frexp 39

Idexp 44

log 2889

log10 3007

Power Functions pow 2134

sqrt 493

Rounding Functions ceil 94

floor 51

Absolute Value Function fabs 6

Modular Arithmetic

Functions

modf 151

fmod 129

Note 1: Results are based on using the dsPIC30F

MPLAB® C30 Compiler (SW006012) version 1.20.

2: Maximum “Memory Usage” when all functions in the

library are loaded. Most applications will use less.

3: All performance statistics represented here are for

32-bit IEEE754 floating-point input and output data

types.

4: Performance (in instruction cycles) listed here

represent an average number of instruction cycles

required to perform the floating-point operation.

Ordering Information:

SW300020 dsPIC30F Math Library (Free download: www.microchip.com)

DS51443

“dsPIC30F Math Library Product Overview”

(Available at: www.microchip.com)

FREE

Software

dsPIC30F Peripheral Library

The dsPIC30F Peripheral Library provides a set of

functions for setting up and controlling the operation of

all the peripheral modules available in the dsPIC30F

devices, as well as functions for interfacing with an

external LCD. The Peripheral Library serves as a

convenient layer of abstraction over the specific details

of the peripherals and their associated control and

status registers.

The dsPIC30F Peripheral Library supports the

following hardware peripheral modules:

•Timers

• Input Capture

• Output Compare

• Quadrature Encoder Interface (QEI)

• Motor Control PWM

• I/O Ports and External Interrupts

• Reset

•UART

•SPI™

•I

2C™

• Data Converter Interface (DCI)

• 10-Bit A/D Converter

• 12-Bit A/D Converter

•CAN

Functions for controlling an external LCD through

configurable I/O port pins are also provided

Features

• For each individual device from the dsPIC30F family,

there is a file that includes functions corresponding to

peripherals present in that particular device.

• ‘C’ include files enable the user to take advantage of

predefined constants for passing parameters to

various library functions. There is an include file for

each peripheral module.

• Since the functions are in the form of precompiled

libraries, they may be called from a user application

program written in either MPLAB®C30 or dsPIC30F

Assembly language.

• ‘C’ source code is also included so users can

customize the functions to suit specific application

requirements.

• Predefined constants in ‘C’ include files eliminate the

need to refer to details and structure of Special

Function Registers, while initializing peripherals or

checking status bits.

Resource Requirements

Program Memory

The Peripheral Library functions have been optimized

for reduced program memory usage. Since the

functions are in the form of libraries, the actual program

memory requirements depend on the functions being

called by the application, as well as on the specific

dsPIC30F device being used.

Data Memory

The vast majority of the functions do not use RAM at

all. Each of the remaining functions uses less than

10 bytes of RAM.

Ordering Information:

SW300021 dsPIC30F Peripheral Library (Free download: www.microchip.com)

DS51443

“dsPIC30F Peripheral Library Product Overview”

(Available at: www.microchip.com)

FREE

Development Systems Ordering Guide

dsPIC30F Soft Modem Library

The Microchip Soft Modem Library is composed of

ITU-T compliant algorithms for V.21, V.22, V.22bis,

V.23, V.32 and V.32bis modem recommendations. Bell

standard 103 is also included in this library.

V.21, V.23 and Bell 103 are Frequency Shift Keying

(FSK) modems. V.32, V.32bis and V.22bis are

Quadrature Amplitude Modulated (QAM) modems.

V.22 is a Quadrature Phase Shift Keyed (QPSK)

modem. V.21, V.22, V.22bis, V.32 and V.32bis are all

2-wire, full-duplex modems. V.23 is a full-duplex

modem when it operates with a 75 bps backwards

channel.

V.22bis includes fallback to V.22, V.23 and V.21

standards. V.32bis optionally falls back to V.22bis,

V.22, V.23 and V.21 standards.

Features

The data modem library is provided in two basic

software packages:

• V.22bis/V.22, which is offered free with full source

code

• V.32bis/V.32, which is offered in a tiered pricing

structure with full source code

The library currently supports single-channel

data pump implementations.

Both libraries are supported with fallback data pump

modulations down to V.21. Each data modem library is

provided with a respective library archive containing all

the data pump object code modules required to link to

the user’s application. Hardware component drivers,

such as UART and Data Converter Interface for

DAA/AFE I/O, are provided in Assembly source code

for linking with the user’s application.

ITU-T Recommendation V.42 is provided with each

library. V.42 contains a High-Level Data Link Control

(HDLC) protocol, referred to as Link Access Procedure

for Modems (LAPM) and defines error correcting

protocols for modems.

All data pump modulations are developed in ASM30

Assembly code, yielding optimal code size and

execution time. The AT, V.42 and Data Pump APIs are

based on C30 C language.

Electronic documentation accompanies the modem

library to help you become familiar with and implement

the library functions. A comprehensive

“Soft Modem

User’s Guide”

describes the required APIs for the AT,

V.42 and data pump layers.

Ordering Information:

SW300003-EVAL dsPIC30F V.32bis Soft Modem Library Software License (Evaluation Copy)

SW300002 dsPIC30F V.22bis Soft Modem Library (Free download: www.microchip.com)

SW300003 dsPIC30F V.32bis Soft Modem Library Software License (Up to 5K units)

SW300004 dsPIC30F V.32bis Soft Modem Library Software License (5K to 25K units)

SW300005 dsPIC30F V.32bis Soft Modem Library Software License (25K to 100K units)

DS70126

“dsPIC30F Soft Modem Library Product Overview”

(Available at: www.microchip.com)

Software

dsPIC30F Speech Recognition Library

The dsPIC30F Speech Recognition Library provides

voice control of embedded applications that require an

alternative user interface. With a vocabulary of up to

100 words, the Speech Recognition Library allows

users to control their applications vocally. The Speech

Recognition Library is an ideal front-end for hands-free

products, such as modern appliances, security panels

and cell phones. The Speech Recognition Library has

very modest memory and processing requirements.

Features

• Speaker-independent recognition of isolated words

• Hidden Markov Model-based recognition system

• Recognition time < 500 msec

• Master library of 100 common words

•Windows

® operating system-based utility allows you

to create a custom library from the master library

• Additional words can be added to the master library

(fee-based)

• No speaker training is required

• US English language support

• Data tables can be stored in external memory

• Optional keyword activation and silence

detection

• Optional system self-test using a predefined

keyword

•Flexible API

• Full compliance with Microchip MPLAB® C30

language tools

• “dsPIC30F Speech Recognition Library User’s

Guide”

The Speech Recognition Library provides isolated,

speaker-independent word recognition of US English. It

allows the user to control an application through a set

of fixed, voice commands.

The library has already been pretrained by a

demographic cross-section of male and female US

English speakers. Conveniently, no training is required

for end users of the product.

The library samples speech data from a voice codec

connected to the dsPIC30F device’s Data Converter

Interface. The data is processed a frame at a time, and

when a word ending is detected, the received word is

identified using Hidden Markov Model processing. After

the library identifies the word, your application may

then take some predefined action.

The Speech Recognition algorithm is written in

Assembly language to optimize performance and

minimize RAM usage. A well-defined API makes it

easy to integrate the Speech Recognition Library with

your application. Library functions let your application

easily disable and enable speech recognition. The

library lets your other system processing operations

take place without disrupting speech recognition.

Ordering Information:

SW300010-EVAL dsPIC30F Speech Recognition Library Software License (Evaluation Copy)

SW300010 dsPIC30F Speech Recognition Library Software License (Up to 5K units)

SW300011 dsPIC30F Speech Recognition Library Software License (5K to 25K units)

SW300012 dsPIC30F Speech Recognition Library Software License (25K to 100K units)

AC300031 Accessory Kit (includes: microphone, headset and 6.144 MHz clock oscillator)

DS51465

“dsPIC30F Speech Recognition Library Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

dsPIC30F Noise Suppression Library

The dsPIC30F Noise Suppression Library provides a

function to suppress the effect of noise interference

with a speech signal. This function is useful for

microphone-based applications, which have a potential

for incoming speech corruption by ambient noise

captured by the microphone. It is especially suitable for

systems in which an acoustically isolated noise

reference is not available, such as:

• Hands-free Cell Phone Kits

• Speakerphones

•Intercoms

• Teleconferencing Systems

• Headsets

• As a front-end to a Speech Recognition system

(e.g., SW300010)

• Any microphone-based application that needs to

eliminate undesired noise

Features

• Only 2 user functions (“NoiseSuppressionInit”

and “NoiseSuppression”), both of which can be

called from either a ‘C’ or Assembly application

program

• Full compliance with the Microchip dsPIC30F C30

Compiler, Assembler and Linker

• Simple user interface – just one library file and one

header file

• Highly optimized Assembly code, utilizing DSC

instructions and advanced addressing modes

• Audio Bandwidth: 0-4 kHz at 8 kHz sampling rate

• 10-20 dB noise reduction, depending on the type of

noise:

- Several speech recordings corrupted by

Babble, Car Cabin, White and Narrowband

Noise included for library evaluation

• Source code is provided with the library

•

“dsPIC30F Noise Suppression Library User’s Guide”

is provided to help the user understand and use the

library

• Demo application source code is provided with the

library

• Accessory Kit available for purchase includes: an

audio cable, headset, oscillators, microphone,

speaker, DB9 M/F RS-232 cable, DB9M-DB9M null

modem adapter and can be used for library

evaluation

Contact Microchip sales for FREE evaluation samples.

Noise

and Speech Speech

Noise

Suppression

User Application

Ordering Information:

SW300040-EVAL dsPIC30F Noise Suppression Library Software License (Evaluation Copy)

SW300040-5K dsPIC30F Noise Suppression Library Software License (Up to 5K units)

SW300040-25K dsPIC30F Noise Suppression Library Software License (5K to 25K units)

SW300040-100K dsPIC30F Noise Suppression Library Software License (25K to 100K units)

AC300030 Accessory Kit (includes: audio cable, headset, oscillators, microphone, speaker,

M/F RS-232 cable, DB9M-DB9M Null Modem Adapter)

DS70124

“dsPIC30F Noise Suppression Library Product Overview”

(Available at: www.microchip.com)

Software

dsPIC30F Acoustic Echo Cancellation Library

The dsPIC30F Acoustic Echo Cancellation (AEC)

Library provides a function to eliminate echoes

generated in the acoustic path between a speaker and

a microphone. This function is useful for speech and

telephony applications in which a speaker and a

microphone are located in close proximity to each other

and therefore, susceptible to signals propagating from

the speaker to the microphone resulting in a

perceptible and distracting echo effect at the far end. It

is especially suitable for these applications:

• Hands-free Cell Phone Kits

• Speakerphones

•Intercoms

• Teleconferencing Systems

For hands-free phones intended to be used in compact

environments, such as a car, this library is fully

compliant with the G.167 standard for acoustic echo

cancellation.

Features

• Only 2 user functions

(“AcousticEchoCancellerInit” and

“AcousticEchoCanceller”), both of which can be

called from either a ‘C’ or Assembly application

program

• Full compliance with the Microchip dsPIC30F C30

C Compiler, Assembler and Linker simple user

interface – just one library file and one header file

• Highly optimized Assembly code, utilizing DSC

instructions and advanced addressing modes

• Echo cancellation for 16, 32 or 64 ms echo delays or

‘tail lengths’ (configurable)

• Fully tested for compliance with G.167

specifications for in-car applications

• Audio Bandwidth: 0-4 kHz at 8 kHz sampling rate

• Convergence Rate: Up to 43 dB/sec., typically > 30

dB/sec.

• Echo Cancellation: Up to 50 dB, typically > 40 dB

• Can be used together with the Noise Suppression

(NS) Library, since the same processing block size

(10 ms) is used

•

“dsPIC30F Acoustic Echo Cancellation Library

User’s Guide”

is provided to help the user

understand and use the library

• Demo application source code is provided with the

library. Accessory kit available for purchase includes:

an audio cable, headset, oscillators, microphone,

speaker, DB9 M/F RS-232 cable and DB9M-DB9M

Null Modem Adapter and can be used for library

evaluation

• Contact Microchip sales for FREE evaluation

samples

∑+

Acoustic Echo

Cancellation

FAR END NEAR END

Far End

Speech

Far End

Speech

Near End

Speech Near End

Speech

Receive Path

Adaptive

Filter

Send Path

User Application

Echo

Ordering Information:

SW300060-EVAL dsPIC30F Acoustic Echo Cancellation Library Software License (Evaluation Copy)

SW300060-5K dsPIC30F Acoustic Echo Cancellation Library Software License (Up to 5K units)

SW300060-25K dsPIC30F Acoustic Echo Cancellation Library Software License (5K to 25K units)

SW300060-100K dsPIC30F Acoustic Echo Cancellation Library Software License (25K to 100K units)

AC300030 Accessory Kit (includes: audio cable, headset, oscillators, microphone, speaker,

M/F RS-232 cable, DB9M-DB9M Null Modem Adapter)

DS70123

“dsPIC30F Acoustic Echo Cancellation Library Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

dsPIC® DSC Symmetric Key Embedded

Encryption Library

Microchip offers a reliable security solution for

embedded applications built on the dsPIC30F platform.

This solution is provided by means of two libraries –

Symmetric Key and Asymmetric Key Embedded

Encryption Libraries. The Symmetric Key Library

features the following:

• Hash Functions:

- SHA-1 Secure Hash Standard

- MD5 Message Digest

• Symmetric Key Encryption/Decryption Functions:

- Advanced Encryption Standard (AES)

- Triple Data Encryption Algorithm

(Triple-DES)

• Random Number Generator Functions:

- Deterministic Random Bit Generator

ANSI X9.82

Features

• C-callable library functions developed in

MPLAB® ASM30

• Assembly language

• Optimized for speed, code size and RAM usage:

- RAM usage below 60 bytes

• Library functions extensively tested for

adherence to applicable standards

• Symmetric Key Encryption/Decryption functions

support multiple modes of operation:

- Electronic Code Book (ECB) mode

- Cipher Block Chaining with Message

Authentication (CBC-MAC) mode

- Counter (CTR) mode

- Combined CBC-MAC and Counter (CCM)

mode

• A comprehensive

“dsPIC30F Embedded

Encryption Libraries User’s Guide”

describing the

required APIs for the library functions

• Several examples of use are provided for each

library function

Ordering Information:

SW300050-EVAL dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (Evaluation Copy)

SW300050-5K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (Up to 5K units)

SW300050-25K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (5K to 25K units)

SW300050-100K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (25K to 100K units)

DS70128

“dsPIC

DSC Symmetric Key Embedded Encryption Library Product Overview”

(Available at: www.microchip.com)

Software

dsPIC® DSC Asymmetric Key Embedded

Encryption Library

Microchip offers a reliable security solution for

embedded applications built on the dsPIC30F platform.

This solution is provided by means of two libraries –

Symmetric Key and Asymmetric Key Embedded

Encryption Libraries. The Asymmetric Key Library

implements the following:

• Public Key Encryption/Decryption Functions:

- RSA (1024 and 2048-bit)

• Key Agreement Protocol:

- Diffie-Hellman (1024 and 2048-bit)

• Signing and Verification:

- DSA (1024-bit)

- RSA (1024 and 2048-bit)

• Hash and Message Digest Functions:

-SHA-1, MD5

• Random Number Generator (RNG):

-ANSI X9.82

Features

• C-callable library functions developed in

MPLAB ASM30 Assembly language

• Optimized for speed, code size and RAM usage:

- RAM usage below 100 bytes

• Library functions extensively tested for

adherence to applicable standards

• A comprehensive

“dsPIC30F Embedded

Encryption Libraries User’s Guide”

describing the

required APIs for the library functions

• Several examples of use provided for each library

function

Typical Applications

The algorithms supported by this library have emerged

as the defacto standard for many large scale, secured

applications, like web access, e-mail, secure XML

transactions and Virtual Private Networks (VPN).

These algorithms are also recommended by most

Internet Engineering Task Force (IETF) Standards,

Federal Information Processing Standards (FIPS) and

IPSec Standards. Some typical applications for this

library include:

• Mobile and wireless devices, PDAs

• Secure banking

• Secure web transactions:

- Secure Socket Layer (SSL)

- Transport Layer Security (TLS)

- Secure Multi-purpose Internet Mail

Extensions (S/MIME)

- ZigBee™ technology and other monitoring

and control applications

• Smart card readers

• Friend/foe identification

• Peripherals interoperating with TCG and NGSCB

personal computers

The Trusted Computing Group (TCG) and related

Microsoft® Next Generation Secure Computing Base

(NGSCB) both specify RSA and Triple-DES. AES,

Triple DES and other symmetric solutions are featured

in the dsPIC30F Symmetric Key Embedded Encryption

Library (SW300050).

Ordering Information:

SW300055-EVAL dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (Evaluation Copy)

SW300055-5K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (Up to 5K units)

SW300055-25K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (5K to 25K units)

SW300055-100K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (25K to 100K units)

DS70127

“dsPIC

DSC Asymmetric Key Embedded Encryption Library Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

dsPIC30F Speech Encoding/Decoding Library

The dsPIC30F Speech Encoding/Decoding Library

performs toll-quality voice compression and voice

decompression. The library is based on a modified

version of Speex source code and features a 16:1

compression ratio. It samples speech at 8 kHz and

compresses it to a rate of 8 kbps. Storing compressed

speech for playback requires approximately 1 Kbyte of

memory for each second of speech.

Features

Key features of the library include:

• Fixed 8 kHz sample rate

• Fixed 8 kbps output rate

• PESQ-based Mean Opinion Score: 3.7-4.2 (out of 5.0)

• Code Excited Linear Prediction (CELP)-based coding

• Two analog input interfaces – codec or on-chip

12-bit ADC

• Two analog output interfaces – codec or

on-chip PWM

• Optional Voice Activity Detection

• Playback-only applications will benefit from the

Speech Encoder Utility. It allows you to make

encoded speech files from your desktop using a PC

microphone or WAV file

• Storing compressed speech requires 1 KB of

memory per second of speech

• Off-chip support for playback of long speech samples

• Royalty free (only one-time license fee)

• Full compliance with Microchip MPLAB® C30

C Compiler Tools

•

“dsPIC30F Speech Encoding/Decoding Library

User’s Guide”

(DS70154) is provided to help the user

understand and use the library

• Designed to run on dsPICDEM™ 1.1 Demonstration

Board (DM300014)

Resource Requirements

Decoder:

Playback Interface: Si-3000 Audio codec or PWM

Computational Power: 3 MIPS

Program Flash Memory: 15 KB

RAM*: 3.2 KB

Encoder:

Sampling Interface: Si-3000 Audio codec or 12-bit ADC

Computational Power: 19 MIPS (worst case)

Program Flash Memory: 33 KB

RAM*: 5.4 KB (1.2 KB is scratch)

* Full-duplex support is presently not possible due to RAM requirements,

but support will be provided with future devices. Half-duplex support is

now possible and requires 6.8 KB of RAM.

Ordering Information:

SW300070-EVAL dsPIC30F Speech Encoder/Decoder Library Software License (Evaluation Only)

SW300070-5K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 5K units)

SW300070-25K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 25K units)

SW300070-100K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 100K units)

DS70146

“dsPIC30F Speech Encoding/Decoding Library Product Overview”

NEW

Software

dsPICworks™ Data Analysis and DSP Software

dsPICworks software is an easy-to-use data analysis

and signal processing package for designs using

dsPIC30F digital signal controllers. It provides an

extensive number of functions encompassing:

• Signal generation

• Arithmetic operations and digital signal processing

• One, two and three-dimensional display and

measurement capabilities

• Data import/export compatible with MPLAB® IDE and

MPLAB ASM30 Assembler

Features

• Wide variety of signal generators – sine, square,

triangular, window functions, noise

• Extensive DSP functions – FFT, DCT, filtering,

convolution, interpolation

• Extensive arithmetic functions – algebraic

expressions, data scaling, clipping, etc.

• 1-D, 2-D and 3-D displays

• Multiple data quantization and saturation options

• Multi-channel data support

• Automatic “script file”-based execution options

available for any user-defined sequence of

dsPICworks software functions

• File import/export interoperable with MPLAB IDE

• Digital filtering options support filters generated by

dsPIC Digital Filter Design

• ASM30 Assembler file option to export data tables

into dsPIC30F RAM

Signal Generation

dsPICworks software supports an extensive set of

signal generators, including basic sine, square and

triangle wave generators, as well as advanced

generators for window functions, unit step, unit sample,

sinc, exponential and noise functions.

Arithmetic and Digital Signal Processing

(DSP) Operations

dsPICworks software has a wide range of DSP and

arithmetic functions which can be applied to signals.

Standard DSP functions include transform operations –

FFT and DCT, convolution and correlation, signal

decimation, signal interpolation sample rate conversion

and digital filtering.

Display and Measurement

dsPICworks software has a wide variety of display and

measurement options. Frequency domain data may be

plotted in the form of 2-dimensional “spectrogram” and

3-dimensional “waterfall” options. The log window

shows current cursor coordinates, as well as derived

values, such as the difference from last position and

signal frequency.

Ordering Information:

SW300023 dsPICworks™ Data Analysis and DSP Software (Free download: www.microchip.com)

DS51442

“dsPICworks

™

Data Analysis and DSP Software Product Overview”

(Available at: www.microchip.com)

FREE

Development Systems Ordering Guide

Digital Filter Design/Digital Filter Design Lite

The Digital Filter Design tool for the dsPIC® 16-bit Digital

Signal Controllers makes designing, analyzing and

implementing Finite Impulse Response (FIR) and Infinite

Impulse Response (IIR) digital filters easy through a

menu-driven and intuitive user interface. The filter design

tool performs complex mathematical computations for

filter design, provides superior graphical displays and

generates comprehensive design reports. Desired filter

frequency specifications are entered and the tool

automatically generates the filter code and coefficient files

ready to use in the MPLAB® IDE. System analysis of the

filter transfer function is supported with multiple generated

graphs, such as: magnitude, phase, group delay, log

magnitude, impulse response and pole/zero locations.

Finite Impulse Response Filter Design

• Design method selection:

- FIR Windows design

- FIR Equiripple design (Parks-McClellan)

• Low-pass, high-pass, band-pass and band-stop filters

• FIR filters can have up to 513 taps

• Following window functions are supported:

- Rectangular: 4 Term Cosine

- Hanning (Hann): 4 Term Cosine with continuous 5th

derivative

- Hamming: Minimum 4 Term Cosine

- Triangular: Good 4 Term Blackman Harris

- Blackman: Harris Flat Top

- Exact Blackman: Kaiser

- 3 Term Cosine: Dolph-Tschebyscheff

- 3 Term Cosine with continuous 3rd derivative: Taylor

- Minimum 3 Term Cosine: Gaussian

• Reports show design details, such as window

coefficients and Impulse Response, prior to

multiplying by the window function

• Filters are designed for a maximum gain of 1

Comparison – Filter Design vs. Filter Design Lite

Infinite Impulse Response Filter Design

• Low-pass, high-pass, band-pass and band-stop filters

• Filter orders up to 10 for low-pass and high-pass filters

• Filter orders up to 20 for band-pass and band-stop filters

• Five analog prototype filters are available:

- Butterworth

- Tschebyscheff

- Inverse Tschebyscheff

- Elliptic

-Bessel

• Digital Transformations are performed by bilinear

transformation method

• Reports show design details, such as all

transformations from normalized low-pass filter to

desired filter

Code Generation Features

• Generated files are compliant with the Microchip

dsPIC30F C30 C Compiler, Assembler and Linker

• Choice of placement of coefficients in program space

or data space

• ‘C’ wrapper/header code generation

Graphs

• Magnitude Response vs. Frequency

• Log Magnitude vs. Frequency

• Phase Response vs. Frequency

• Group Delay vs. Frequency

• Impulse Response vs. Time (per sample)

• Step Response vs. Time (per sample)

• Pole and Zero Locations (IIR only)

Filter Design Filter Design Lite

Low-pass ✓✓

High-pass ✓✓

Band-pass ✓✓

Band-stop ✓

FIR Taps Up to 513 Up to 64

IIR Taps for LP, HP Up to 10 Up to 4

IIR Taps for BP, BS Up to 20 Up to 8

Generate ASM Code ✓—

Export to MPLAB® IDE ✓✓

Export to MPLAB® C30 C Compiler ✓✓

MATLAB® Support ✓✓

Ordering Information:

SW300001 Digital Filter Design

SW300001-LT Digital Filter Design Lite

DS51442

“Digital Filter Design/Digital Filter Design Lite”

(Available at: www.microchip.com)

Software

CMX-MicroNet™ for dsPIC30F Devices

CMX-MicroNet is an embedded TCP/IP stack that is

specifically designed for optimized use of Flash and

RAM resources on Microchip’s 16-bit Digital Signal

Controller. The software runs directly on the processor

with no gateways or PCs required. The stack can be

run in Stand-alone mode or work in conjunction with an

RTOS. Using only industry standard protocols,

CMX-MicroNet offers true TCP/IP networking via

Direct, Dial-up or Ethernet connectivity and wireless

Ethernet (802.11b) as well.

Up to 127 sockets can be open at a time. They can be

Ethernet sockets and/or either PPP or SLIP sockets.

PPP and SLIP cannot be used at the same time. An

HTTP Web server, FTP server, SMTP client and DHCP

client are also available. The RS-232 link, if used, can

either be a direct cable link or through a modem.

Description

CMX-MicroNet is available for a low, one-time fee with

no royalties on deployed products. In addition,

CMX-MicroNet offers only industry standard protocols

running directly on the target processor and full source

code is provided with every sale.

Supported Protocols

CMX-MicroNet Specifications for

dsPIC® DSC Products

Flash

• UDP/IP + core: 4470 bytes

• TCP/IP + core: 7827 bytes

• UDP/TCP/IP + core: 8685 bytes

• PPP: 6681 bytes

• Modem: 447 bytes

• HTTP server: 3888 bytes

• Virtual file: 885 bytes

• Ethernet: 2652 bytes

• DHCP Client: 2202 bytes

• FTP Server: 3657 bytes

• TFTP Client: 723 bytes

• BOOTP: 684 bytes

• SMTP: 1918 bytes

• Utility: 1314 bytes

TCP PPP

UDP SLIP

IP HTTP Web Server

DHCP FTP

TFTP SMTP

Ordering Information:

CMX-MicroNet™ for dsPIC30F Devices is available from CMX.

DS51447

“CMX-MicroNet

™

for dsPIC30F Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

CMX-RTX™ for dsPIC30F Devices

In some cases, well-structured linear programming is

sufficient for a product. In most cases, however,

programmers appreciate not having to worry about

structuring their code to perform all necessary tasks in

a timely manner. This is where CMX-RTX can help.

CMX-RTX allows tasks (pieces of code that do specific

duties) to run quasi-concurrently. This means that tasks

will seem to run all at the same time – doing many

specific jobs simultaneously.

CMX-RTX takes the worry and headaches out of

real-time programming. The software lets embedded

programmers concentrate on the overall application as

it takes care of the little details. Finish projects faster

and more efficiently with CMX-RTX.

Some RTOS software offers only cooperative

scheduling, which means that the running task has to

call the scheduler to perform a task switch. Others offer

time slicing, where each task runs for a certain period

of time, at which point, a task switch takes place no

matter what. Others claim to be fully preemptive, but do

not allow any interrupt to cause a preemption. All of

these models will fail at one point or another.

CMX-RTX allows a task of higher priority that is able to

run (whether starting or resuming) to preempt the lower

priority running task. This will cause the scheduler to

save the context of the running (lower priority) task

and restore the context of the higher priority task so

that it is now running. A truly preemptive RTOS allows

interrupts to cause an immediate task switch. This

means that the interrupts now have the added ability of

using the RTOS’s functions.

Features

• The smallest footprint

• The fastest context switch times

• The lowest interrupt latency times

• True preemption

• Scheduler and interrupt handler written in

Assembly for speed and optimization

• Optional cooperative and time-slicing scheduling

• Nested interrupts

• All functions contained in a library

• Interrupt callable functions

• Scalability

• Free source code provided

• Integrated with CMX-MicroNet™ for optional

networking connectivity

CMX-RTX Specifications for

dsPIC® DSC Products

Flash

• All CMX Functions: 3696 bytes

• CMX Initialize Module: 936 bytes

• CMX Assembly Module (scheduler): 645 bytes

• RAM, Each Task Control Block: 28 bytes

• Min. Context Switch:

- 92 cycles (starting a task)

- 137 cycles (resuming a task)

• CMX functions are contained in a library, thus

reducing code size, if not referenced

Ordering Information:

SW300031 CMX-RTX™ for dsPIC30F Devices

DS51435

“CMX-RTX

™

for dsPIC30F Product Overview”

(Available at: www.microchip.com)

Software

CMX-Scheduler™ for dsPIC® DSC Devices

CMX-Scheduler is the result of a special collaboration

between CMX and Microchip. Available in object code

only, CMX-Scheduler is available for FREE to

embedded systems designers using the dsPIC® digital

signal controllers. CMX-Scheduler is specially

designed for developers whose designs do not require

a full blown RTOS and/or who are wondering if a kernel

might help their application. The perfect entry-level

kernel, CMX-Scheduler is intuitive to use and easy to

implement.

CMX-Scheduler offers many growth paths for future

designs. User applications developed with the

CMX-Scheduler kernel are upwardly compatible with

the popular CMX-Tiny+™ or CMX-RTX™ RTOSes.

CMX-Scheduler also is tightly integrated with the

unique CMX-MicroNet™ TCP/IP stack for those

applications that require networking connectivity.

CMX-Scheduler software and documentation is

delivered in electronic format and is freely licensed for

unlimited product usage on the dsPIC DSC devices.

Features

• FREE for use on any dsPIC DSC device

• Easy to learn and use

• Truly preemptive kernel

• Supports up to five tasks

• Fast performance

• Free bug fixes and updates

• No royalties on shipped products

• Compatible with CMX-Tiny+ and CMX-RTX

• Complete electronic documentation

• Integrated with CMX-MicroNet for optional

networking connectivity

CMX-Scheduler Specifications for

dsPIC® DSC Products

• All CMX Functions: 972 bytes

• CMX Initialize Module: 153 bytes

• CMX Assembly Module: 567 bytes

• RAM, Each Task Control Block: 11 bytes

• Flash, Each Task Control Block: 5 bytes:

- Min. Context Switch: 81 cycles

(starting a task)

- 102 cycles (resuming a task)

• CMX functions are contained in a library, thus

reducing code size, if not referenced

Functionality

•K_Task_Create – creates a task

•K_Task_Start – starts a task

•K_Task_Wake – wakes a task

•K_Task_Wait – has a task wait with/without a

time-out

•K_Task_Kill – Deletes a task

•K_Task_Coop_Sched – performs a cooperative

task switch

•K_Event_Wait – waits on an event

•K_Event_Signal – signals an event from a task

•K_Event_Signal – signals an event from an

interrupt

Ordering Information:

SW300030 CMX-Scheduler™ for dsPIC® DSC Devices (Free download: www.cmx.com/microchip)

DS51439

“CMX-Scheduler

™

for dsPIC

DSC Devices Product Overview”

(Available at: www.microchip.com)

FREE

Development Systems Ordering Guide

CMX-Tiny+™ for dsPIC30F Devices

In some cases, well-structured linear programming is

sufficient for a product. In most cases, however,

programmers appreciate not having to worry about

structuring their code to perform all necessary tasks in

a timely manner. This is where CMX-Tiny+ can help.

CMX-Tiny+ allows tasks (pieces of code that do

specific duties) to run quasi-concurrently. This means

that tasks will seem to run all at the same time – doing

many specific jobs simultaneously.

CMX-Tiny+ takes the worry and headaches out of

real-time programming. The software lets the

embedded programmer concentrate on the overall

application while taking care of the little details.

Finish projects faster and more efficiently with

CMX-Tiny+.

Some RTOS software offers only cooperative

scheduling, which means that the running task has to

call the scheduler to perform a task switch. Others

offer time slicing in which each task runs for a certain

period of time, at which point, a task switch takes

place no matter what. Others claim to be fully

preemptive, yet do not allow any interrupt to cause a

preemption. All of these models will fail at one point or

another.

CMX-Tiny+ allows a task of higher priority that is able

to run (whether starting or resuming) to preempt the

lower priority running task. This will cause the

scheduler to save the context of the running (lower

priority) task and restore the context of the higher

priority task so that it is now running.

A truly preemptive RTOS allows interrupts to cause an

immediate task switch. This means that the interrupts

now have the added ability of using the RTOS’s

functions.

In addition, CMX-Tiny+ has been especially designed

to offer such a small Flash/RAM footprint that it can be

used with only the on-board Flash/RAM of the dsPIC

DSC as a single chip solution. Based upon a scaled

down version of the popular CMX-RTX™, CMX-Tiny+

retains most of the power of CMX-RTX, as well as the

more frequently used functions.

Features

• Extremely small Flash/RAM footprint

• Truly preemptive RTOS

• Low-power mode supported

• Full source code with every purchase

• Free technical support and updates

• Low, economical pricing

• No royalties on shipped products

• Backward compatible with CMX-Scheduler™

• Integrated with CMX-MicroNet™ for optional

networking connectivity

CMX-Tiny+ Specifications for

dsPIC® DSC Products

Flash

• All CMX Functions: 2304 bytes

• CMX Initialize Module: 249 bytes

• CMX Assembly Module (scheduler): 570 bytes

• RAM, Each Task Control Block: 13 bytes

• Flash, Each Task Control Block: 6 bytes

• Min. Context Switch:

- 71 cycles (starting a task)

- 121 cycles (resuming a task)

• CMX functions are contained in a library, thus

reducing code size, if not referenced

Ordering Information:

SW300032 CMX-Tiny+™ for dsPIC30F Devices

DS51436

“CMX-Tiny+

™

for dsPIC30F Product Overview”

(Available at: www.microchip.com)

Software

FilterLab® Active Filter Software Design Tool

FilterLab Active Filter Software Design Tool is an

innovative software tool that simplifies active filter

design. The FilterLab Active Filter Software Design

Tool provides full schematic diagrams of the filter circuit

with component values and displays the frequency

response.

Features

• Multiple filter order and responses with gain option:

- Ability to select Bessel, Butterworth or

Chebyshev filter response

- Up to 8th-order filters can be simulated

- Circuit diagram and component values given

• Bode plot with phase margin:

- Resultant Bode plot generated

• Circuit implementation:

- Standard 1-percent resistors

- Standard capacitor values can generate and

are user adjustable

- Circuit configuration: Sallen-Key (noninverting)

or multiple feedback (inverting)

• Spice model generated:

- Spice model of entire filter generated

- Allows for streamline of simulations

• Anti-aliasing wizard

- Filter optimization for Analog-to-Digital

Converter based on bit resolution and

sample rate

Ordering Information:

Free download: www.microchip.com

FREE

Development Systems Ordering Guide

Total Endurance™ Software Model

Microchip’s revolutionary Total Endurance Software

Model provides electronic system designers with

unprecedented visibility into serial EEPROM-based

applications. This advanced software model (with a

very friendly user interface) eliminates time and

guesswork from serial EEPROM-based designs by

accurately predicting the device’s performance and

reliability within a user-defined application

environment. Design trade-off analysis, which formerly

consumed days or weeks, can now be performed in

minutes – with a level of accuracy that delivers a truly

robust design.

With Microchip’s Total Endurance Software Model,

users may input the following application parameters:

• Serial EEPROM device type

• Bytes to be written per cycle

• Cycling mode – byte or page

• Data pattern type – random or worst-case

• Temperature in °C

• Erase/Write cycles per day

• Application lifetime or target PPM level

The model will respond with FIT rate, PPM level,

application life and plot of the PPM level versus

number of cycles. The model is available in both

MS-DOS® and Windows® versions.

Features

• Automatic or manual recalculation

• Real-time update of data

• Full screen or windowed graphical view

• Hypertext on-screen help

• Key or slide bar entry of parameters

• On-screen editing of parameters

• Single click copy of plot to clipboard

• Numeric export to delimited text file

• On-disk Total Endurance tutorial

Ordering Information:

Free download: www.microchip.com

FREE

Software

KEELOQ® Security ICs License CD

The KEELOQ Security ICs License CD contains

application notes, decoder software and the KEELOQ

Security ICs Software Toolkit. Also included are data

sheets, development tools documentation and

MPLAB® IDE software.

The KEELOQ Security ICs Software Toolkit is a tool that

is designed to be used by a system developer to debug

code. The toolkit allows the user to receive

transmissions from the KEELOQ Security ICs

Evaluation Kit II (DM303006).

The KEELOQ Security ICs decoder software is typically

used as the starting point of a decoder design. The

software is fully described in the application notes

accompanying the software.

Ordering Information:

DS40038 KEELOQ® Security ICs License CD

Available from Microchip at: lit_inquiry@microchip.com (Americas and Canada),

euro.inquiry@microchip.com (Europe) or asia.inquiry@microchip.com (Far East.

Development Systems Ordering Guide

NOTES:

© 2005 Microchip Technology Inc. DS30177T-page 31
This section contains the following major topics:
MPLAB® ICD 2 In-Circuit Debugger..........................................................................................32
MPLAB® ICD 2 Accessories .....................................................................................................33
PICSTART® Plus Development Programmer............................................................................34
PICkit™ 1 Flash Starter Kit........................................................................................................35
rfPIC® Development Kit 1..........................................................................................................36
PIC10F2XX Programmers/Adapters .........................................................................................37
Signal Analysis PICtail™ Daughter Board ................................................................................38
Ethernet PICtail™ Daughter Board ...........................................................................................39
PICkit™ 2 Starter Kit .................................................................................................................40
HARDWARE

Development Systems Ordering Guide

MPLAB® ICD 2 In-Circuit Debugger

The MPLAB

ICD 2 module

is a low-cost

development

tool that

connects

between the

PC and the

designer’s

target board,

allowing direct

in-circuit

debugging of a target PICmicro® MCU or dsPIC® DSC.

Programs can be executed in real time or single step,

watch variables established, break points set, memory

read/writes accomplished and more. It can also be

used as a development programmer for the

microcontrollers.

The MPLAB ICD 2 allows debugging of selected

Flash-based Microchip microcontrollers using MPLAB

Integrated Development Environment (IDE). This

powerful graphical user interface is included with each

unit as a free tool. It is the ideal tool for embedded

control designers who do not have the budget for a

high-cost, in-circuit emulator.

Shared overhead includes: one stack level, some

general purpose file registers, a small bank of program

memory when in the Debug mode and two hardware

pins (RB6 and RB7).

The MPLAB ICD 2 is firmware-based, which allows it to

be enhanced to support future microcontroller products

and new features, extending the tool life and making it

a valued buy. Firmware downloads are available from

the Microchip web site at: www.microchip.com.

Features

• USB (full speed, 2 Mbits/s) and RS-232 interface to

host PC

• Real-time background debugging

• Built-in overvoltage/short-circuit monitor

• Supports low-voltage operation to 2.0 volts

• Diagnostic LEDs (power, busy, error)

• Reading/writing memory space and stack of target

microcontroller

• Erase of program memory space with verification

• Freeze on Halt

• Programs many Flash devices

Ordering Information:

DV164005 MPLAB® ICD 2 Module (Includes MPLAB ICD 2 Module, RJ-11 Cable and USB Cable)

DV164006 MPLAB® ICD 2 Evaluation Kit

(Includes MPLAB ICD 2 Module, RJ-11 Cable, USB Cable, RS-232 Cable, Power Supply and

PICDEM™ 2 Plus Demonstration Board – DM163022)

DV164007 MPLAB® ICD 2 Module ws

(Includes MPLAB ICD 2 Module, RJ-11 Cable, USB Cable, RS-232 Cable and Power Supply)

DV164030 MPLAB® ICD 2 with dsPICDEM™ Starter Demonstration Board

DV164032 MPLAB® ICD 2 with dsPICDEM 1.1 General Purpose Demonstration Board

DS51264

“MPLAB

ICD 2 In-Circuit Debugger/Programmer Product Overview”

(Available at: www.microchip.com)

Hardware

MPLAB® ICD 2 Accessories

RS-232 and Power Supply Kit

Universal Power Supply and Serial Cable to support

using the ICD 2 for serial communications or with the

Universal Programmer Module. These items are

included with the MPLAB® ICD 2 Evaluation Kit

(DV164006) and MPLAB® ICD 2 Module ws

(DV164007) products.

Universal Programming Module

The Universal

Programming Module is

a handy, low-cost tool to

support programming of

DIP packaged products

from Microchip.

It can be used in

conjunction with the

In-Circuit Debugger

(MPLAB ICD 2) to provide an easy means for

programming microcontrollers.

Seven flying leads break out the primary programming

lines needed for any microcontroller. These are

connected to the 40 breakout pins of the ZIF socket,

allowing any part to be configured to the necessary

programming lines.

Features

• ZIF Socket

• Supports up to 40-pin devices from 300 to 600 mil

width

• MPLAB ICD 2 Connector

MPLAB ICD 2 Header Interfaces

The header interface provides in-circuit debugging

capability to the 8-pin, 14-pin or 18-pin devices. The

header interface is connected in place of the target

device and houses a standard MPLAB ICD 2

connector. In-circuit debugging is done via an

MPLAB ICD 2. Once the code is debugged, the

debugged software can then be programmed into the

device and installed in the board, replacing the header.

Ordering Information:

AC162048 RS-232 and Power Supply Kit

AC162049 Universal Programming Module

AC162050 PIC12F629/675 MPLAB ICD 2 Header Interface Module

AC162051 MPLAB® ICD 2 Header Interface Module

AC162052 PIC16F630/676 MPLAB ICD 2 Header Interface Module (14-pin DIP)

AC162053 PIC16F648A/627A/628A MPLAB ICD 2 Header Interface Module (18-pin DIP)

AC162054 MPLAB® ICD 2 18-pin Header (PIC16F716)

AC162055 MPLAB® ICD 2 14-pin Header (PIC16F684)

AC162056 MPLAB® ICD 2 14-pin Header (PIC16F688)

AC162057 MPLAB® ICD 2 14-pin Header (PIC16F638/636)

AC162058 MPLAB® ICD 2 8-pin Header (PIC12F683)

AC162059 MPLAB® ICD 2 8/14-pin Header (PIC16F505)

Estimated availability CQ305

AC162060 MPLAB® ICD 2 20-pin Header (PIC16C785)

Estimated availability CQ305

Development Systems Ordering Guide

PICSTART® Plus Development Programmer

The PICSTART Plus

Programmer gives the

product developer the ability

to program user software into

any of the supported

microcontrollers. The

PICSTART Plus Programmer

software, running under

MPLAB

IDE, provides for full

interactive control over the

programmer.

The PICSTART Plus Programmer provides the product

development engineer with a highly flexible, low-cost

design tool set for all PICmicro® MCUs (DIP packages,

up to 40 pins). PLCC and QFN adapters are available.

The CE-compliant PICSTART Plus Programmer

features a molded plastic enclosure and special circuit

design techniques to enhance ESD protection. The

PICSTART Plus Development Programmer is not

recommended for use in a production environment.

Sample software programs are provided to help the

developer quickly become familiar with the PICSTART

Plus Development Programmer system and with

Microchip’s PICmicro MCU families. Included is a

limited C compiler (PICC LITE™ C Compiler) for the

PIC16F84 family.

The MPASM™ Macro Assembler provides

programmable memory data files, listing files and

special files required for symbolic debug. The MPLAB

SIM Software Simulator allows the user to isolate code

problems and debug firmware designs on PICmicro

MCUs. It simulates the core functions, as well as most

of the peripherals of the PICmicro MCU families. It is

particularly suitable for optimizing algorithms where

real-time emulation is not required.

The PICSTART Plus Programmer system runs on any

PC-compatible machine under Windows®98 SE or

later operating system. The easy-to-use PICSTART

Plus Programmer software provides for full interactive

control over the programmer and features Microchip’s

highly acclaimed MPLAB IDE, with its built-in editor,

assembler and Windows operating system-based

MPLAB SIM Simulator.

PICSTART Plus Development Programmer

Flash Reprogrammable Firmware Upgrade

This PICSTART Plus Programmer upgrade is a PCB

containing a PIC18F6720 part and replaces the

PIC17C44 inside a PICSTART Plus Programmer. The

firmware is upgradable using MPLAB IDE. It is no

longer necessary to program a PIC17C44 and open

the product enclosure to replace the PICSTART Plus

Programmer firmware.

PICSTART® Plus Development

Programmer Contents

• PICSTART Plus Development Programmer

•Product Sample

• MPLAB IDE Software

• PICC LITE C Compiler

• RS-232 Interface Cable

• Power Supply

• Complete Documentation

Ordering Information:

DV003001 PICSTART® Plus Development Programmer

UK003010 PICSTART® Plus Development Programmer Flash Reprogrammable Firmware Upgrade

AC164024 68-pin PLCC Adapter Kit for PIC16C92X and PIC17C75X

AC164027 84-pin PLCC Adapter Kit for PIC17C76X

AC164031 28-pin DIP to 28-pin QFN Adapter

AC164032 8-pin DFN to 8-pin DIP Adapter

AC164033 18-pin DIP to 28-pin QFN Adapter

AC164034 40-pin DIP to 44-pin QFN Adapter

DS51034

“PICSTART

Plus

Development Programmer

Product Overview”

(Available at: www.microchip.com)

Hardware

PICkit™ 1 Flash Starter Kit

The PICkit 1

Flash Starter Kit

is a low-cost

development kit

with an easy-to-

use interface for

programming

Microchip’s

8/14-pin Flash

family of

microcontrollers.

This starter kit is

designed to help the user get up to speed quickly using

PICmicro® microcontrollers.

The kit provides everything needed to program,

evaluate and develop applications using Microchip’s

powerful 8/14-pin Flash family of microcontrollers.

Instructions are provided in a series of seven tutorials

that cover I/O, interrupts, A/D Converters,

comparators, data tables and timers. All source code

files for the tutorials are furnished.

Code development and debugging is performed using

Microchip’s powerful MPLAB® Integrated Development

Environment (IDE). The MPLAB IDE is a seamless,

integrated software development environment that

includes an MPASM™ Macro Assembler, MPLAB SIM

Software Simulator with symbolic debugger,

color-coded source editor, project manager with

high-level language debugging and concurrent support

for development tools, including low-cost, in-circuit

debuggers, full-featured, real-time emulators and

programmers. The consistent and easy-to-use graphic

user interface of the MPLAB IDE desktop allows for

rapid switching between development, debugging and

programming modes within a project.

Features

• Small 3" x 4.5" circuit board with snap-off prototyping

board

• Easy-to-use Windows® programming interface for

programming Microchip’s 8/14-pin Flash family of

microcontrollers

• Seven sequential tutorials, written in both Assembly

and HI-TECH C, demonstrate how to use Microchip’s

8/14-pin Flash family of microcontrollers

• Microchip’s Tips ‘n Tricks booklet provides efficient,

low-cost design techniques using Microchip Flash

microcontrollers

•

“PICkit 1 Flash Starter Kit User’s Guide”

(included

on CD)

• Microchip’s MPLAB IDE software for a complete

code development environment

• HI-TECH PICC LITE™ C Compiler (contained on the

MPLAB IDE CD)

PICkit™ 1 Flash Starter Kit Contents

• PICkit 1 Flash Starter Circuit Board with

8-pin PIC12F675

• PICkit 1 Flash Starter Kit CD

• MPLAB® IDE (Integrated Development

Environment) CD

•

“8-Pin Flash PIC

Microcontrollers Outperform

the Competition Tips ‘n Tricks”

Booklet

• USB Interface Cable

• PIC16F684 Sample

Ordering Information:

DV164101 PICkit™ 1 Flash Starter Kit

UK164101 PICkit 1 Flash Starter Firmware Upgrade Kit – includes v2.0 + firmware for use with the

Signal Analysis PICtail™ Daughter Board (AC164120) and the PIC10F2XX Universal Programmer

Adapter (AC163020)

AC163020 PIC10F2XX Universal Programmer Adapter (see page 37)

AC163021 PIC10F2XX SOT-23 to DIP-8 Programmer Adapter Kit (see page 37)

DS40244

“PICkit

™

1 Flash Starter Kit Product Overview”

(Available at www.microchip.com)

Development Systems Ordering Guide

rfPIC® Development Kit 1

The rfPIC

Development Kit 1

provides design

engineers with

an easy way

to evaluate

unidirectional,

remote sense and

control wireless

links based on the

rfPIC12F675 and

rfRXD0420/0920 devices. The kit is based on the

popular PICkit™ 1 Flash Starter Kit and consists of

modular building blocks for different transmitters and

receivers that can be utilized for prototype systems or

to evaluate different options using Microchip products.

The receiver modules are based on the rfRXD0420

and rfRXD0920 devices and are available in two

options supporting 315 MHz ASK and 433 MHz ASK.

These modules plug directly into the PICkit 1 Flash

Starter development board, offering an easy way to

evaluate the different receiver modules with

Microchip’s 8 and 14-pin Flash PIC® microcontrollers,

as well as a USB interface to a PC. The modules are

also available for sale separately to allow a number of

prototypes based on the same module without having

to do an actual RF design. The design files for these

modules are available to allow easy integration of the

designs into a system.

The transmitter modules are based on the

rfPIC12F675 devices and support the same frequency

and modulation formats as the receivers. The

transmitter modules feature button inputs for remote

control functions, as well as analog input to allow

evaluation of the A/D and comparator peripherals on

the rfPIC12F675. Code development is achieved with

Microchip’s MPLAB® Integrated Development

Environment (IDE). The microcontroller is easily

programmed using the PICkit 1 Flash Starter Kit, with

modules plugging into the PICkit 1 Flash Starter

development board in a similar manner as the receiver

modules.

rfPIC® Development Kit 1 Contents

• PICkit™ 1 Flash Starter Kit

• 433.92 MHz Transmitter

• 315 MHz Transmitter

• 433.92 MHz Receiver

• 315 MHz Receiver

• rfPIC Software and Complete Documentation

(on CD)

Ordering Information:

DV164102 rfPIC® Development Kit 1

AC164101 rfPIC® Transmitter Module (433.92 MHz)

AC164102 rfPIC® Transmitter Module (315 MHz)

AC164103 rfPIC® Receiver Module (433.92 MHz)

AC164104 rfPIC® Receiver Module (315 MHz)

AC164105 rfPIC® Receiver Module – 5 Pack (433.92 MHz)

AC164106 rfPIC® Receiver Module – 5 Pack (315 MHz)

DS51409

“rfPIC

Development Kit 1 Product Overview”

(Available at: www.microchip.com)

Hardware

PIC10F2XX Programmers/Adapters

Baseline Flash Microcontroller

Programmer

The Baseline

Flash

Microcontroller

Programmer

(BFMP) is a simple

and easy to use

ICSP™

programmer

intended to be

used with any of

Microchip’s new

baseline Flash

PIC® microcontrollers. The BFMP provides a 6-pin

linear ICSP header for standard ICSP support, as well

as stand-alone programming support for the PIC10F

family when paired with the PIC10F2XX Universal

Programmer Adapter, providing the least expensive

method of programming. The BFMP utilizes USB and

does not require an external power supply. The

included Graphical User Interface (GUI) allows users to

read, write and verify the microcontroller to be

programmed.

PIC10F2XX Universal Programmer

Adapter

The PIC10F2XX

Universal

Programmer

Adapter provides

PIC10F socket

support for both

the SOT-23 and

DIP-8 packages. It

allows interfacing

to Microchip’s

low-cost family of

programmers,

inclusive of:

PICkit™ 1 Flash

Starter Kit, MPLAB® ICD 2, PICSTART® Plus

Programmer and the BFMP.

PIC10F2XX SOT-23 to DIP-8

Programmer Adapter Kit

This is a kit

consisting of (5)

PIC10F206

SOT-23, (5) pin

scramble boards

and DIP pins.

Once assembled,

this will make the

SOT-23 look like a

standard 8P DIP

and can be used

directly in standard development tool sockets. Note

that the PIC10F 8P DIP pinout is family-specific and

differs from the standard 8P DIP pinout. This kit is NOT

intended for production applications and should be

used only as a method of early evaluation.

Ordering Information:

PG164101 Baseline Flash Microcontroller Programmer

AC163020 PIC10F2XX Universal Programmer Adapter

AC163021 PIC10F2XX SOT-23 to DIP-8 Programmer Adapter Kit

Development Systems Ordering Guide

Signal Analysis PICtail™ Daughter Board

The Signal Analysis PICtail™ Daughter Board works

as an extension to the PICkit™ 1 Flash Starter Kit.

When combined with the PICkit 1 Flash Starter Kit,

version 2.0.0 or later firmware and signal analysis PC

program, the Signal Analysis PICtail Daughter Board

can perform signal analysis capabilities such as:

• Real-Time Strip Chart

• Oscilloscope

• Fast Fourier Transformation (FFT)

• Histogram

• Programming

The Signal Analysis PICtail Daughter Board comes

populated with a PIC16F684 MCU and two 25LC640

SPI™ compatible serial EEPROM memory devices.

Signal Analysis PICtail™ Daughter Board Contents

• Signal Analysis PICtail Daughter Board Printed

Circuit Board (PCB)

• PICkit 1 Flash Starter Kit CD-ROM Version 2.0

(or later) (DS40049)

Includes complete information on the Signal

Analysis PICtail Daughter Board including:

- “Signal Analysis PICtail

™

Daughter

Board User’s Guide”

- Signal Analysis PC Program

- Lesson Project Source and Object Code

• Preprogrammed PIC16C745 PICmicro® device

with USB Version 2.0.0 (or later)

Ordering Information:

AC164120 Signal Analysis PICtail™ Daughter Board

UK164101 PICkit™ 1 Flash Starter Firmware Upgrade Kit

(includes firmware V.2.0 or greater required for Signal Analysis PICtail Daughter Board)

Hardware

Ethernet PICtail™ Daughter Board

The Ethernet PICtail Daughter Board provides a cost-

effective method of evaluating and developing Ethernet

control applications. The board is designed for

flexibility and can be plugged into any selection of

Microchip’s standard PICDEM™ demonstration boards

through a 28-pin PICtail pinout. The board is populated

with the 28-pin ENC28J60 Ethernet controller which

interfaces to the RJ-45 female connector.

Features

• IEEE 802.3 Compliant

• 10Base-T Ethernet

• RJ-45 Female Ethernet Connector

• Plug in compatible with:

- PICDEM HPC Explorer (DM183022)

- PICDEM Z 2.4 GHz Demonstration Board

(DM163027-2)*

- PICDEM FS USB Demonstration Board

(DM163025)*

* Future Support

Ordering Information:

AC164121 Ethernet PICtail™ Daughter Board

NEW

Development Systems Ordering Guide

PICkit™ 2 Starter Kit

The Microchip

PICkit™ 2 Starter

Kit provides a

quick, easy and

low-cost way to

start development,

from concept to

prototype, using

selected

Flash-based PIC®

microcontrollers.

The PICkit 2 Starter

Kit is a complete

“

development system in a box

”

providing programming, evaluation and development in

one simple design.

The kit provides everything needed to program,

evaluate and develop applications using Microchip’s

powerful Flash family of microcontrollers. Lessons are

provided that cover input/output, interrupts, A/D

Converters and timers. All source code files for the

lessons are provided.

Code development and debugging is performed using

Microchip’s powerful MPLAB® Integrated Development

Environment (IDE). The MPLAB IDE is a seamless,

integrated software development environment that

includes the MPASM™ Assembler, MPLAB SIM

Software Simulator with symbolic debugger, color-

coded source editor, project manager with high-level

language debugging and concurrent support for

development tools, including low-cost in-circuit

debuggers, full-featured real-time emulators and

programmers. The consistent and easy-to-use graphic

user interface of the MPLAB IDE desktop allows for

rapid switching between development, debugging and

programming modes within a project.

Features

Key features of the PICkit 2 Starter Kit include:

• Easy to use Windows® programming interface for

programming Microchip’s Flash family of

microcontrollers

• Lessons to demonstrate how to use Microchip’s

Flash family of microcontrollers

• Five Microchip Tips 'n Tricks Booklets provide

efficient, low-cost design techniques using Microchip

Flash microcontrollers (contained on the CD-ROM)

•

“PICkit

™

2 Microcontroller Programmer User’s

Guide”

(included on CD-ROM)

• FREE! Microchip’s MPLAB IDE software for a

complete code development environment

• FREE! HI-TECH PICC Lite™ C Compiler (contained

on the MPLAB IDE CD-ROM)

PICkit™ 2 Starter Kit Contents

• PICkit™ 2 Microcontroller Programmer

• Low Pin Count Demo Board (only with

DV164120)

• PICkit™ 2 Starter Kit Software and

Documentation CD

• MPLAB® IDE Software and Documentation CD

• USB Interface Cable

Ordering Information:

DV164120 PICkit™ 2 Starter Kit (includes Low Pin Count Demo Board featuring the new PIC16F690

for a programming out-of-the-box experience)

PG164120 PICkit™ 2 Microcontroller Programmer

NEW

This section contains the following major topics:

MPLAB® ICE 2000 Modular In-Circuit Emulator .......................................................................42

MPLAB® ICE 4000 Modular In-Circuit Emulator .......................................................................43

MPLAB® ICE 2000/4000 Replacement Accessories ................................................................44

Ordering Information .................................................................................................................45

EMULATION

Development Systems Ordering Guide

MPLAB

ICE 2000 Modular In-Circuit Emulator

Microchip’s

universal

MPLAB ICE 2000

for PICmicro®

MCUs has been

designed with

user requirements

in mind. The

system is

small, portable,

lightweight and

offers improved

performance and value. For quick hook-up to portable

or desktop PCs, MPLAB ICE 2000 easily connects to

the parallel (printer) port.

Interchangeable processor modules allow the system

to be easily configured to emulate different processors.

This modular system consists of an emulator pod, a

processor module, a device adapter and a transition

socket (optional). Also included is Microchip’s MPLAB

Integrated Development Environment (IDE) featuring

MPASM™ Macro Assembler, MPLAB IDE

Programmer’s Editor, Symbolic Debugger and Project

Manager with built-in support for high-level languages

that support the Common Object Description format

(i.e., MPASM Assembler, MPLAB C17 and

MPLAB C18 C Compilers).

MPLAB ICE 2000 is a premium quality emulator

system providing full-speed emulation, low-voltage

operation, 32K x 128-bit trace and unlimited

breakpoints. Complex triggering of the MPLAB ICE

2000 provides sophisticated trace analysis and

precision breakpoints. The trace analyzer captures

real-time execution addresses, opcodes and read/

writes of external data. It also traces all file register

RAM usage showing internal addresses and data

values, as well as all accesses to Special Function

Registers, including I/O, timers and peripherals.

Triggers and breakpoints can be set on single events,

multiple events and sequences of events. The MPLAB

ICE 2000 analyzer is fully transparent and does not

require halting the processor to view the trace. In

addition, MPLAB ICE 2000 supports code coverage

profiling.

Features

• Full-speed, real-time emulation

• Low-voltage emulation: 2.0V to 5.5V

• Trace memory: 32K x 128-bit

• Break/trigger on internal registers

• Program address software breakpoints

• Complex break/trigger on logic: program address

and data; internal register address and data; access

type; and eight external inputs

• One external input and output logic analyzer trigger

• Multi-level trigger (4 levels)

• Pass and delay counters

•Time-stamp

• Programmable clock: 32 kHz to 40 MHz

• Logic probes

• Parallel (printer) port communications

• Code coverage profiling

MPLAB

ICE 2000 In-Circuit

Emulator Contents

• MPLAB ICE 2000 with Tripod

• MPLAB IDE Software and Documentation CD

• Logic Probes

• Parallel Cable

• Power Supply

Ordering Information:

ICE2000 MPLAB® ICE 2000 Modular In-Circuit Emulator Pod (See ordering instructions on page 45)

DS51153

“MPLAB

ICE 2000 In-Circuit Emulator Product Overview”

(Available at: www.microchip.com)

Emulation

MPLAB® ICE 4000 Modular In-Circuit Emulator

The MPLAB

ICE 4000

in-circuit emulator

is intended to

provide the product

development

engineer with a

complete

microcontroller

design tool set for

high-end PICmicro®

microcontrollers. Software control of the emulator is

provided by the MPLAB Integrated Development

Environment, which allows editing, building,

downloading and source debugging from a single

environment.

The MPLAB ICE 4000 is a premium emulator system

providing the features of MPLAB ICE 2000, but with

increased emulation memory and high-speed

performance for dsPIC30F and PIC18XXXX devices.

Its advanced emulator features include complex

triggering and timing, up to 2 MB of emulation memory,

and the ability to view variables in real time.

The MPLAB ICE 4000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows® 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

Features

• Full-speed emulation

• Low-voltage emulation down to 1.8 volts

(or device limit)

• 64K deep x 216-bit wide trace memory

• Up to 2 MB of addressable memory

• Unlimited breakpoints

• Complex break, trace and trigger logic

• Multi-level trigger up to 4 levels

• 48-bit time-stamp

• Stopwatch

• External inputs

• External output to sync with other instrumentation

• USB port connection to PC

MPLAB® ICE 4000 In-Circuit Emulator Contents

• MPLAB ICE 4000

• MPLAB IDE Software and Documentation CD

•Flex Cable

• Logic Probes

•USB Cable

• Power Supply

Ordering Information:

ICE4000 MPLAB® ICE 4000 Modular In-Circuit Emulator Pod (See ordering instructions on page 45)

DS51321

“MPLAB

ICE 4000 High-Performance In-Circuit Emulator Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

MPLAB® ICE 2000/4000 Replacement Accessories

Device Adapter Plugs

Device adapter plugs are available as replacement

accessories. The table below lists the replacement part

number.

Transition Headers

Transition socket headers can be purchased

separately in the event that a customer needs

additional headers. The table below lists the headers

available.

MPLAB ICE 2000

Replacement Accessories

MPLAB ICE 4000

Replacement Accessories

Extra logic probe hooks can be purchased from:

E-Z-Hook: (800) 995-HOOK

Part Number: XM25

Description: Micro Hook Adapter with 0.025

square pin

Model

Part Number Description

ACICE0201 MPLAB ICE 8P 300 mil Adapter Plug

ACICE0202 MPLAB ICE 18P 300 mil Adapter Plug

ACICE0203 MPLAB ICE 20P 300 mil Adapter Plug

ACICE0204 MPLAB ICE 28P 300 mil Adapter Plug

ACICE0205 MPLAB ICE 28P 600 mil Adapter Plug

ACICE0206 MPLAB ICE 40P 600 mil Adapter Plug

ACICE0207 MPLAB ICE 14P 300 mil Adapter Plug

Model

Part Number Description

ACICE0301 8P SOIC Header

ACICE0302 14P SOIC Header

ACICE0303 18P SOIC Header

ACICE0304 20P SSOP Header

ACICE0305 20P SOIC Header

ACICE0306 28P SOIC Header

ACICE0307 28P SSOP Header

Model

Part Number Description

ACICE0103 MPLAB ICE 2000 Power Supply

ACICE0104 MPLAB ICE 2000 Logic Probes

ACICE0105 MPLAB ICE 2000 Parallel Cable

ACICE0106 MPLAB ICE Tripod

ACICE0107 MPLAB ICE 2000 Flex Cable

ACICE0108 MPLAB ICE 2000 USB/Parallel Adapter

Model

Part Number Description

ACICE0401 MPLAB ICE 4000 Power Supply

ACICE0402 MPLAB ICE 4000 Logic Probes

ACICE0403 MPLAB ICE 4000 Slim Parallel Cable

ACICE0106 MPLAB ICE Tripod

ACICE0407 MPLAB ICE 4000 Flex Cable

Emulation

Ordering Information

MPLAB® ICE 2000 and

MPLAB® ICE 4000 Emulator Systems

How to Order MPLAB ICE

MPLAB ICE is easy to order, using these three steps.

1. Determine the PICmicro® MCU device needed.

2. Identify the PICmicro MCU package needed.

3. Locate the correct MPLAB ICE component part

numbers from the

“

Cross Reference

”

section on

pages 103 through 136.

A Complete MPLAB ICE System

MPLAB ICE is a modular emulator system with

interchangeable components that allow easy

configuration of the system before emulation of

different PICmicro MCUs. Since each emulator

supports package-specific emulation, customers need

to know which devices and packages they intend to

emulate. Customers can then use the parts list in the

“

Cross Reference

”

section starting on page 103 to

identify the part numbers required to complete an

MPLAB ICE system. A complete system consists of:

1. An emulator pod (including, among other things,

the host-to-pod parallel cable and power supply)

2. A processor module

3. A device adapter

4. A transition socket

An MPLAB ICE emulator system is ordered as

separate components. Knowing the terms will make it

easy to order and use the MPLAB ICE emulator

system. Read more about each component.

Emulator Pod

The MPLAB ICE 2000 and MPLAB ICE 4000 are

full-featured emulator pods, containing a main board,

with an additional board for expanded trace memory

and complex control logic. The MPLAB ICE 2000 pod

comes with a standard parallel interface cable that

connects the pod to the parallel port of the PC.

MPLAB ICE 4000 includes a USB interface cable that

connects the pod to the USB port.

Processor Module

The processor module is a PICmicro MCU,

device-specific module that is inserted into the

emulator pod. The processor module contains the

emulator chip, logic and low-voltage circuitry. A flex

cable extends from the processor module and is

connected to the device adapter at the target

application.

Device Adapter

The device adapter provides a common interface for

the PICmicro MCU being emulated. This adapter

contains a special device that provides an oscillator

clock, allowing the user to accurately emulate the RC

characteristics of the PICmicro MCU. The device

adapter provides emulation support for standard DIP

and PLCC styles. For emulation support of other

packages, customers will need a transition socket in

addition to the device adapter.

Transition Socket

The transition sockets are available in various styles to

allow the common device adapter to be translated to

support surface-mount packages, such as SOIC,

SSOP, PQFP, TQFP and QFN.

Emulator Pod

Processor Module

Device Adapter Transition Socket

MPLAB

ICE 2000 Emulator

Device Adapter

Transition Socket

Processor Module

Emulator Pod

Indicator Lights

Logic Probe

Connector

Power Switch

(on back)

Power

Host-to-Pod

Flex Circuit Cable

MPLAB

ICE 4000 Emulator

Development Systems Ordering Guide

NOTES:

This section contains the following major topics:

MPLAB® PM3 Universal Device Programmer...........................................................................48

In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II Device Programmer .....49

Programmer Adapter Kits and Accessories ..............................................................................50

PROGRAMMING

Development Systems Ordering Guide

MPLAB® PM3 Universal Device Programmer

The MPLAB PM3

Universal Device

Programmer is easy-to-

use and operates with a

PC or as a stand-alone

unit, and programs

Microchip’s entire line of

PICmicro® devices, as

well as the latest

dsPIC30F DSC devices. The MPLAB PM3 features a

large and bright LCD unit (128 x 64 pixels) to display

easy menus, programming statistics and status

information.

The MPLAB PM3 Programmer has exceptional

programming speed to allow high production

throughput, especially important for large memory

devices, and includes a Secure Digital/Multimedia Card

slot for easy and secure data storage and transfer.

The MPLAB PM3 Programmer is designed with

40 programmable socket pins, allowing each socket

module to be configured to support many different

devices, requiring fewer socket modules to support the

entire line of Microchip parts. The socket modules use

multi-pin connectors for high reliability and quick

interchange. An adapter allows current PRO MATE® II

Device Programmer socket modules to be used on the

MPLAB PM3 Programmer.

When connected to a PC-host system, either via a

serial or USB port, the MPLAB PM3 Programmer is

seamlessly integrated with the MPLAB Integrated

Development Environment (IDE) providing an

exceptionally user-friendly interface for the ultimate

control during programming. The MPLAB IDE includes

a full-featured macro assembler, powerful software

simulator with symbolic debugger, color-coded

programmer’s editor, project manager, high-level

language debugging and support for Microchip and

selected third party development tools, including

compilers, low-cost in-circuit debuggers and

full-featured in-circuit emulators.

Features

• RS-232 or USB interface

• Integrated In Circuit Serial Programming™ (ICSP™)

interface

• Fast programming time

• Three operating modes:

- PC Host mode for full control

- Safe mode for secure data

- Stand-Alone mode for programming

without a PC

• Complete line of interchangeable socket modules to

support all Microchip devices and package options

(sold separately)

•SQTP

SM serialization for programming unique serial

numbers while in PC Host mode

• An alternate DOS command-line interface is

available for batch control

• Supports PRO MATE II Device Programmer socket

modules via adapter (sold separately)

• Large easy-to-read display

• Field upgradeable firmware allows quick new device

support

• Secure Digital (SD) and Multimedia Card (MMC)

external memory support

• Buzzer notification for noisy environments

MPLAB® PM3 Universal Device Programmer

Contents

• MPLAB PM3 Programming Unit

• Serial Cable for RS-232 PC Connection

• USB Cable for USB PC Connection

• ICSP Cable

• Power Supply And Power Cables

• MPLAB Integrated Development Environment CD

• User’s Guide and Technical Documentation on CD

Ordering Information:

DV007004 MPLAB® PM3 Universal Device Programmer

AC164350 PRO MATE® II Device Programmer to MPLAB® PM3 Socket Module Adapter

DS51444

“MPLAB

PM3 Universal Device Programmer Product Overview”

(Available at: www.microchip.com)

Programming

In-Circuit Serial Programming™ (ICSP™) Socket

for PRO MATE® II Device Programmer

Microchip offers an ICSP kit that can be used with

Microchip’s PRO MATE II Device Programmer.

Together, these two tools allow you to implement ICSP

with minimal effort and use the ICSP capability of

Microchip’s PICmicro® MCUs.

In-System Programming is a technique where a

programmable device is programmed after the device

is placed in a circuit board. ICSP is an enhanced ISP

technique implemented in Microchip’s PICmicro OTP

and Flash MCUs. Using only two I/O pins to serially

input and output data makes ICSP easy-to-use and

less intrusive on the normal operation of the MCU.

The In-Circuit Serial Programming Socket module is a

complete kit, including connectors, cables and required

interface boards to allow a development engineer to

implement ICSP with the PRO MATE II Device

Programmer.

ICSP™ Socket for PRO MATE® II

Device Programmer Contents

• ICSP Socket

•Cable

• Power Supply

• Complete Documentation

Ordering Information:

AC004004 ICSP Socket Module

Development Systems Ordering Guide

Programmer Adapter Kits and Accessories

68-Pin PLCC Adapter Kit

PIC16C92X/PIC17C75X 68-pin PLCC Adapter for

PICSTART® Plus Development Programmer. Currently, this

header supports PIC16C92X and PIC17C75X.

84-Pin PLCC Adapter Kit

PIC17C6X 84-pin PLCC Adapter for PICSTART® Plus

Development Programmer.

28-Pin QFN Adapter Kit

PIC16CXX 28-pin QFN Adapter for PICSTART® Plus and

PRO MATE® II Programmers (with AC164012).

Ordering Information:

AC002021 MPLAB® PM3 ICSP™ Cable

AC004005 PRO MATE® II Device Programmer Elastomeric Connectors

AC164024 68-Pin PLCC Adapter Kit

AC164027 84-Pin PLCC Adapter Kit

AC164031 28-Pin QFN Adapter Kit for 40-Pin ZIF Socket

AC164032 8-Pin DFN Adapter Kit

AC164033 28-Pin QFN Adapter Kit for 18-Pin ZIF Socket

AC164034 44-Pin QFN Adapter Kit

AC163020 6-Pin SOT-23/8P DIP Programmer Adapter

© 2005 Microchip Technology Inc. DS30177T-page 51
This section contains the following major topics:
PICDEM™ Demonstration Boards............................................................................................52
PICDEM™ 2 Plus Demonstration Board...................................................................................53
PICDEM™ 4 Demonstration Board...........................................................................................54
PICDEM™ 18R Demonstration Kit............................................................................................55
PICDEM™ Mechatronics Demonstration Kit.............................................................................56
PICDEM™ MC Development Board .........................................................................................57
PICDEM™ MC LV Development Board ....................................................................................58
PICDEM™ HPC Explorer Board ...............................................................................................59
PICDEM™ USB Demonstration Kit...........................................................................................60
PICDEM™ FS USB Demonstration Board................................................................................61
PICDEM™ LCD Demonstration Board......................................................................................62
PICDEM™ Z 2.4 GHz Demonstration Kit..................................................................................63
PICDEM™ CAN-LIN Demonstration Boards.............................................................................64
PICDEM™ LIN Demonstration Kit.............................................................................................65
PICDEM.net™ Demonstration/Evaluation Board......................................................................66
Low-Power Solutions Demonstration Board..............................................................................67
PICmicro® MCU DEMO BOARDS 

Development Systems Ordering Guide

PICDEM™ Demonstration Boards

The PICDEM Demonstration Boards, PICDEM 1,

PICDEM 3 and PICDEM 17 are simple boards which

demonstrate the capabilities of Microchip PICmicro®

MCU families. See the “Cross Reference” section for

specific device support for each board.

All necessary hardware is included to run basic

demonstration programs, which are supplied on a CD.

The users can program the samples provided with the

PICDEM Demonstration Board on a PRO MATE® II or

PICSTART® Plus Programmer and easily debug/test

the sample code, or the user can connect the PICDEM

Demonstration Board to the MPLAB® ICE and

download the sample code to the emulator and

debug/test the code. Additionally, a generous prototype

area is available for user hardware.

PICDEM™ Demonstration Boards Contents

• PICDEM Demonstration Board

(1, 3 or 17 as applicable)

•Product Samples

• Demo/Tutorial Software (PICDEM 3 Demonstra-

tion Board is written in

‘

C’ using the MPLAB

C Compiler demonstration version)

• Complete Documentation

Ordering Information:

DM163001 PICDEM™ 1 Demonstration Board

DM163003 PICDEM™ 3 Demonstration Board

DM173001 PICDEM™ 17 Demonstration Board

PICmicro® MCU Demo Boards and Kits

PICDEM™ 2 Plus Demonstration Board

The PICDEM 2

Plus Demonstration

Board is a

powerful, low-cost

learning and

demonstration

board. The board

comes with an

active program

loaded on the

installed

PIC18F452 microcontroller that provides real-time clock

and local temperature display. The code to accomplish

all of these program features is provided unassembled,

so the user can understand and dissect the

programming algorithm, helping them to quickly learn.

The user can then take advantage of the Flash-based

microcontroller and its in-circuit debugger capability by

cutting, pasting, rewriting or adding to the program to

make their own modification (an MPLAB® ICD is

required to do this). All of the microcontroller port pins

are terminated at a connector header and space is

provided in the generous prototyping area for project

development work.

Features

• 2 x 16 LCD display

• Piezo sounder driven by PWM signal

• Active RS-232 port

• On-board temperature sensor

• Sample PIC16F877 and PIC18F452 Flash

microcontrollers

• MPLAB ICD connector

• Generous prototyping area

PICDEM™ 2 Plus Demonstration Board Contents

• PICDEM 2 Plus Demonstration Board

• PIC16F877 and PIC18F452 Product Samples

• Documentation

Ordering Information:

DM163022 PICDEM™ 2 Plus Demonstration Board

Development Systems Ordering Guide

PICDEM™ 4 Demonstration Board

The PICDEM 4

Demonstration Board

supports Microchip’s

low pin count

PICmicro® Flash

microcontrollers,

including the PIC16F

and PIC18F families

featuring nanoWatt

Technology.

nanoWatt Technology

refers to Microchip’s advanced PMOS Electrically

Erasable Cell (PEEC) process technology, circuit

design, manufacturing and application techniques.

The PICDEM 4 Demonstration Board can be used to

evaluate and demonstrate the capabilities of

Microchip’s 8, 14 and 18-pin PIC12F, PIC16F and

PIC18F microcontrollers. The demonstration board

showcases many features of low pin count parts,

including Local Interconnect Network (LIN) and motor

control features using the Enhanced Capture/

Compare/PWM module (ECCP). Low-power operation

is achieved with a super capacitor circuit and jumpers

allowing the on-board hardware to be disabled to

eliminate current draw in this mode.

Tutorial firmware and samples of a PIC16F and

PIC18F Flash microcontroller are included to assist the

user in becoming familiar with the PICDEM 4

Demonstration Board and to demonstrate the unique

features of the supported devices.

By connecting the PICDEM 4 Demonstration Board to

the MPLAB® ICD 2, a designer can develop, simulate,

debug and download code to the microcontroller using

Microchip’s powerful graphical MPLAB Integrated

Development Environment (IDE). MPLAB IDE is a

seamless, integrated software development

environment that includes an MPASM™ Macro

Assembler, MPLAB SIM Software Simulator with

symbolic debugger, color-coded source editor, project

manager with high-level language debugging and

concurrent support for development tools, including

low-cost in-circuit debuggers, full-featured real-time

emulators and programmers. The consistent and

easy-to-use graphic user interface of the MPLAB IDE

desktop allows for rapid switching between

development, debugging and programming modes

within a project. The MPLAB ICD 2 (DV164007) is

available separately. Microchip’s MPLAB IDE software

can be downloaded free-of-charge from the Microchip

web site.

Features

• RS-232 interface

• 2 x 16 liquid crystal display

• In-Circuit Debugger (ICD) connector for

programming via In-Circuit Serial Programming™

(ICSP™) technology or developing with the

MPLAB ICD 2

• Eight (8) LEDs, four (4) potentiometers, three (3)

push buttons

• PCB footprints for an EEPROM, H-Bridge motor

driver and LIN transceiver

• Support for Crystal, RC or Canned Oscillator modes

• Support for either 9-volt power adapter or battery, or

hooks for a 5-volt, 100 mA regulated DC supply

• Generous prototyping area and header for expansion

PICDEM™ 4 Demonstration Board Contents

• PICDEM 4 Demonstration Board

• Serial Cable

•PICmicro

® Flash Microcontroller Samples

• Sample Programs, Application Notes and

User’s Guide on CD

Ordering Information:

DM163014 PICDEM™ 4 Demonstration Board

DS51339

“PICDEM 4 Demonstration Board Product Overview”

(Available at: www.microchip.com)

PICmicro® MCU Demo Boards and Kits

PICDEM™ 18R Demonstration Kit

This kit demonstrates the power and flexibility of

Microchip’s new ROMless PIC18C601/801

microcontrollers and will significantly speed up

development time for integrating these parts into an

end product. The ROMless demonstration board will

allow several alternative types of memory to be

evaluated with PICmicro® MCUs. It includes an

MPLAB® ICD connector interface for the MPLAB ICD 2

In-Circuit Debugger module, which allows low-cost

debugging.

Features

• Support for 68-pin PLCC PIC18C601 and 84-pin

PLCC PIC18C801 devices

• 8-bit multiplexed (PIC18C601) and demultiplexed

(PIC18C801) memory interfaces

• 16-bit Word Select mode and Byte Select mode

memory interfaces

• 2 MB x 8, 1 MB x 16 JEDEC compliant Flash

memory

• 128 KB x 8 SRAM, 64 KB x 16 JEDEC compliant

SRAM memory support for PC downloadable

executable code into SRAM

• Start execution on-the-fly, general purpose, user-

configurable, PC downloadable external memory

programmer host software

• Eight memory mapped LED outputs

• Two push button switches

• One analog potentiometer input; 64 KB I2C™

EEPROM and a 4-bit LCD connector

PICDEM™ 18R Demonstration Kit Contents

• PICDEM 18R Demonstration Board

•Product Samples

•CD

• Serial Cable

• Power Supply

• Documentation

Ordering Information:

DM163006 PICDEM™ 18R Demonstration Kit

DS39579

“PICDEM™ 18R PIC18C601/801 Demonstration Board Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

PICDEM™ Mechatronics Demonstration Kit

The PICDEM

Mechatronics

Demonstration Kit is

an easy-to-use

mechatronics

development and

demonstration

platform.

Mechatronics refers

to implementing

intelligent control in

a mechanical

system. Learn how to use PIC® microcontrollers to

enhance or replace a mechanical design.

The demonstration kit takes a hands-on approach to

learning about mechatronics. Jumper wires are

provided in the kit and allow the user to experiment

with connecting the PIC® microcontroller to various

components on the board. These components include

sensors, LEDs, human input devices and motor

drivers. The board comes with nine example projects

which include firmware, connection diagrams (for the

wire jumpers) and schematics.

Features

Key features of the PICDEM Mechatronics

Demonstration Kit are:

• PIC16F917 MCU with 8 MHz internal oscillator and

on-board LCD module (in addition to other standard

PIC MCU peripherals)

• Displays 8 LEDs and LCD (preconnected to the

LCD module)

• Stepper Motor and Brushed DC Motors

• Analog out temperature sensor (Microchip TC1047A)

and light sensor

• Light sensor

• 32.768 kHz crystal for time generation

• Human inputs: 4 tactile switches, 2 potentiometers

• Overcurrent protection circuit

• ICSP™ and MPLAB® ICD 2 interface connector

• RS-232 interface

• 5V regulator

• Optical speed sensor for Brushed DC Motor

• 20-pin socket (compatible with all 8,14 and 20-pin

Flash devices)

Projects

The projects included in the kit cover:

• Switch debouncing and lighting an LED

• How to use comparators

• How to read an analog sensor (temperature and light)

• Brushed DC Motor speed control

• Speed feedback: Back-EMF and optical

• Stepper Motor control: single-stepping, half-stepping

and micro-stepping

• How to use the USART for RS-232 communication

• How to use the Capture, Compare, PWM module

Required Hardware

• One of the following:

- MPLAB ICD 2 *

- PICkit™ 2 Microcontroller Programmer

• 9-12 VDC power supply**

• Serial Cable

* Microchip part # DV164007 includes the MPLAB ICD 2,

9V power supply and serial cable

** Microchip part # AC162039 recommended

PICDEM™ Mechatronics

Demonstration Kit Contents

• PICDEM Mechatronics Board populated with the

PIC16F917

• Sample kit including the PIC16F690 and

PIC12F509

• Microchip screwdriver

• 10 wire jumpers

• PICDEM Mechatronics CD-ROM: User’s Guide,

project source code, PIC® MCU Communicator

GUI (serial interface example), MPLAB IDE

Ordering Information:

DM163029 PICDEM™ Mechatronics Demonstration Kit

NEW

PICmicro® MCU Demo Boards and Kits

PICDEM™ MC Development Board

The PICDEM MC Development Board provides

designers with a quick method to evaluate and develop

both AC and DC motor control applications utilizing

Microchip’s family of 28 and 40-pin enhanced

microcontrollers. The development board is ideal for

beginning motor control designers, as well as those

new to the PIC18F2331/2431/4331/4431 family of

motor control devices.

The development board provides a complete solution

for prototyping motor control applications. Both

Brushless DC motors (BLDCs) and AC Induction

Motors (ACIMs) can be driven by the board and directly

controlled through a simple hardware interface

provided on the board itself. The board can also be

configured in numerous ways, using jumpers and

component selection to control a range of motor control

designs, and can accommodate both AC and DC

power inputs. With complete isolation between the

control circuitry and power circuitry, users can safely

plug-in the MPLAB® In-Circuit Emulator (ICE) or

MPLAB In-Circuit Debugger (ICD) while high power is

connected.

Finally, users can develop their application with a

simple graphical interface, known as the Motor Control

Graphical User Interface (MC-GUI). The MC-GUI

provides a quick and easy way for designers to

configure and monitor their motor system parameters,

such as motor type, motor speed, rotational direction,

current, voltage, heat sink temperature and Fault

status.

Features

• Two sockets supporting 28 and 40-pin DIP devices

• Motor terminal strip

• 3-phase inverter power module

• Motion sensor inputs

• Speed control potentiometer

• Active RS-232 port

• Full automatic protection of power circuits

• Electrical isolation from power circuits

• MPLAB ICD connector

• FREE Motor Control GUI software

PICDEM™ MC

Development Board Contents

• PICDEM MC Development Board with a

preprogrammed (BLDC firmware) PIC18F4431

Device

• A 28-pin PIC18F2431 Microcontroller

• RS-232 Cable

• Software and Documentation CD containing the

MC-GUI, User’s Guide and other supporting

documents

Ordering Information:

DM183011 PICDEM™ MC Development Board for PIC18F2331/2431/4331/4431

DS51463

“PICDEM

™

MC Development Board Product Overview”

(Available at: www.microchip.com)

Development Systems Ordering Guide

PICDEM™ MC LV Development Board

The PICDEM

MC LV

Development

Board

provides a

cost-effective

method of

evaluating and

developing

Sensored or

Sensorless

Brushless DC

(BLDC) motor control applications. The board supports

Microchip’s 28-pin, PIC18F microcontrollers and

dsPIC30F Digital Signal Controllers. The board is

capable of controlling motors rated up to 48V and

2.2 Amps.

The development board also comes with two

preprogrammed, Flash-based devices for easy

development: the PIC18F2431 device will populate the

28-pin socket and the dsPIC30F3010 will ship in a

separate sample box. Additionally, the board comes

with a free Motor Control Graphical User Interface

(MC-GUI) which can set and modify all motor

parameters. Custom programming and in-circuit

debugging are facilitated with the ICD connector for

Microchip’s MPLAB® ICD 2 In-Circuit Debugger,

DV164004.

Features

• Motor Control Graphical User Interface (MC-GUI)

• Motor terminal strip

• 3-phase voltage source inverter bridge

• Motion sensor inputs

• Overcurrent protection, level programmable using

potentiometer

• Temperature sensor with I2C™ interface

• Push button switches and master Reset

• 9 LEDs, 3 for generic status indication and 6 for

PWM indication

• Test points for motor current and back EMF sensing

• Speed control potentiometer

• Active RS-232 port

• 24V external power supply (optional)

• 3-phase, 24V BLDC low-voltage motor (optional)

• MPLAB® ICD 2 connector

• MPLAB ICE connector

• Example software and documentation CD-ROM

Ordering Information:

DM183021 PICDEM™ MC LV Development Board

NEW

PICmicro® MCU Demo Boards and Kits

PICDEM™ HPC Explorer Board

The PICDEM HPC Explorer Board is the latest

64/80 TQFP demonstration board for evaluating

Microchip Technology’s PIC18F and PIC18FXXJXX

families of devices. It comes populated with a

PIC18F8722 MCU. Direct connection support is

available for the MPLAB® ICE 2000 and

MPLAB ICE 4000 processor modules, plug-in modules

and MPLAB ICD 2 In-Circuit Programmer.

Software

The PIC18F8722 MCU is preprogrammed with

demonstration software which displays information on

the Windows® HyperTerminal program via the serial port.

Use the following settings:

• 57600 Baud

• 8 Data Bits

•No Parity

•1 Stop Bit

• No Flow Control

• Auto-detect Terminal Emulation

On power-up, PIC18F8722 will continuously display the

LED states, potentiometer voltage, RB0 button state,

temperature and relative time in minutes and seconds.

Additional Features

• PIC18F8722, 128K Flash, 80-pin TQFP microcontroller

• Full pin breakout for easy wire wrap/prototyping

• Daughter board and MPLAB ICE 2000/4000 connector

(with switch to disable on-board processor)

• 10 MHz crystal oscillator (to be used with internal

PLL to provide 40 MHz operation)

• Convenient connection for MPLAB ICD 2 (In-Circuit

Debugger) for in-circuit programming and debugging

• Power supply connector and programmable voltage

regulator, operation capability from 2.0-5.5V (requires

any standard 9-15V power supply (available separately)

• Potentiometer (connected to 10-bit A/D, analog

input channel)

• Temperature sensor demo included (illustrates

Microchip’s award winning TC74 device)

• 8 LEDs (connected to PORTD with jumper disable)

• RS-232 port (9-pin D type connector, UART1)

• Reset button

• Bootloader button

• Extended PICtail™ Daughter Board connector to allow

connection to standard and extended expansion boards

• Serial bootloader ready (see AN851)

• 32 kHz crystal for Real-Time Clock demonstration

To obtain the most recent and complete documentation

for this demonstration board, including:

- User’s Guide

- Board Description

- Board Schematics

- Source Code

- Application Examples

- Links to Web Seminars

Please refer to the following web site:

http://www.microchip.com/HPCExplorer

Note: Pressing the RB0 button during power-up

enables the bootloader. The LEDs can be

toggled by pressing the 1 through 8 keys.

PICDEM™ HPC Explorer Board Contents

• PICDEM HPC Explorer Board

• Plug-in Module PCB Breakoff (attached to board)

• PICDEM HPC Explorer Board Information Sheet

Ordering Information:

DM183022 PICDEM™ HPC Explorer Board

DS51540

“PICDEM

™

HPC Explorer Board Information Sheet”

(Available at: www.microchip.com)

NEW

Development Systems Ordering Guide

PICDEM™ USB Demonstration Kit

The PICDEM USB Demonstration Kit from Microchip

demonstrates a PICmicro® microcontroller

(PIC16C765) communicating to a PC using the USB

port.

A traditional mouse, keyboard or joystick can be

connected to the USB port on a computer using the

preprogrammed board supplied in the kit.

Features

•Status LEDs

• Out-of-the-box working demo

• Generous prototyping area

•PS-Port

• Gameport

PICDEM™ USB Demonstration Kit Contents

• PICDEM USB Demonstration Board with Large

Prototype Area

• USB, Serial, PS-2 and Gameport Connectors

• USB Support Firmware and Example Code

• Documentation

Ordering Information:

DM163010 PICDEM™ USB Demonstration Kit

PICmicro® MCU Demo Boards and Kits

PICDEM™ FS USB Demonstration Board

The PICDEM™ FS USB is a demonstration and

evaluation board for the PIC18F4550 family of Flash

microcontrollers with Full-Speed USB 2.0 interface.

The board contains a PIC18F4550 microcontroller in a

44-pin TQFP package, representing the superset of the

entire family of devices offering the following features:

• 48 MHz maximum operating speed (12 MIPS)

• 32 Kbytes of Enhanced Flash memory

• 2 Kbytes of RAM (of which 1 Kbyte is dual port)

• 256 bytes of data EEPROM

• Full-Speed USB 2.0 interface (capable of 12 Mbit/s

data transfers) including FS-USB transceiver and

voltage regulator

Features

The demonstration board provides the following

functions:

• Temperature sensor TC77 (connected to the

I2C™ bus)

• Potentiometer (connected to RA0 input) for

A/D conversion demonstrations

• 2 LEDs for status display

• 2 input switches

• Reset button

• 20 MHz crystal

• Serial port connector/interface (for demonstrations of

migration from legacy applications)

• Connection to the MPLAB® ICD 2 In-Circuit Debugger

• Voltage regulation, with the ability to switch from

external power supply to USB bus supply

• Expansion connector, compatible with the PICtail™

Daughter Board standard

The board comes preloaded with a USB bootloader that

demonstrates the Enhanced Flash memory capabilities

of the device in addition to allowing the user to

reprogram the PIC18F4550 in-circuit without requiring

use of an external programmer. A CD-ROM is also

included in the kit, offering access to a wealth of

documentation and information about the board, as well

as application notes and software libraries for immediate

support of the HID, CDC and Custom classes.

For more information on the applications, tools and

software libraries offered you, please refer to the

Connectivity Design Center on the Microchip web site

or simply link to: http://www.microchip.com/USB.

PICDEM™ FS USB Demonstration Board Contents

• PICDEM FS USB Demonstration Board

• Software and Documentation CD

• USB Interface Cable

Ordering Information:

DM163025 PICDEM™ FS USB Demonstration Board

NEW

Development Systems Ordering Guide

PICDEM™ LCD Demonstration Board

The PICDEM LCD Demonstration Board will

demonstrate the main features of the new LCD Flash

28, 40, 64 and 80-pin PICmicro® devices with power

management features. The board will be populated

with the PIC18F8490 and the other devices will be

supported via a transition socket. A sample LCD glass

display will be included for customer prototyping. The

PICDEM LCD Demonstration Board will provide tutorial

firmware, which will be on the included preprogrammed

devices. The board will be shipped for “Plug & Play”

operation.

Features

• Default device: PIC18F8490

• Daughter board to support PIC16F91X and

PIC18F6X90

• Battery-based operation: 2-AAA, 3V Li

• Standard LCD glass

• EEPROM

• Thermistor

• MPLAB® ICD and MPLAB® ICE interface

•RS-232

• Real-Time Clock

•PIC

® microcontroller powered peripherals

• POT and switches

PICDEM™ LCD Demonstration Board Contents

• PICDEM LCD Demonstration Board

• Software and Documentation CD

• Microchip’s Recommended Glass Suppliers

Sheet

Ordering Information:

DM163028 PICDEM™ LCD Demonstration Board

NEW

PICmicro® MCU Demo Boards and Kits

PICDEM™ Z 2.4 GHz Demonstration Kit

The PICDEM™ Z

Demonstration Kit is

an easy-to-use

ZigBee™ technology

wireless

communication

protocol development

and demonstration

platform. The

demonstration kit

includes the ZigBee

protocol stack and two

PICDEM Z boards, each with an RF daughter card.

The demonstration kit is also equipped with a 6-pin

modular connector to interface directly with Microchip’s

MPLAB® ICD 2 In-Circuit Debugger (DV164005). With

MPLAB ICD 2, the developer can reprogram or modify

the PIC18 MCU Flash memory and develop and debug

application code, all on the same platform. Microchip

MPLAB IDE software is available for download on the

Microchip web site at no charge.

Features

Key features of the PICDEM Z Demonstration Kit include:

• ZigBee software stack supporting RFD (Reduced

Function Device), FFD (Full Function Device) and

Coordinator

• PIC18LF4620 MCU featuring nanoWatt Technology,

64 KB Flash memory and robust integrated peripherals

• RF transceiver and antenna interface via daughter

card for flexibility

• Supports 2.4 GHz frequency band via Chipcon

CC2420 RF transceiver

• ICSP™ and MPLAB ICD 2 interface connector

• RS-232 interface

• 9V DC to 3.3V DC regulator

• Temperature sensor (Microchip TC77), LEDs and

button switches to support demonstration

ZigBee Protocol Stack Availability

The ZigBee software stack is available from Microchip

under a no-cost license agreement. The source code

and license are available for download from the

Microchip web site at www.microchip.com.

PICDEM™ Z 2.4 GHz Demonstration Kit Contents

• 2 PICDEM Z Motherboards

• 2 PICDEM Z 2.4 GHz RF Cards

• Two 9V Alkaline Batteries

• Software and Documentation CD

Ordering Information:

DM163027-2 PICDEM™ Z 2.4 GHz Demonstration Kit

AC163027-1 PICDEM™ Z Motherboard

AC163027-2 PICDEM™ Z 2.4 GHz RF Card

DS5154

“PICDEM

™

Zigbee

™

Technology Demonstration Kit Product Overview”

(Available at: www.microchip.com)

NEW

Development Systems Ordering Guide

PICDEM™ CAN-LIN Demonstration Boards

Microchip offers

three similar

PICDEM

CAN-LIN

Demonstration

Boards to

support different

PICmicro®

devices. All

demonstrate

the main

features of the

devices, especially those features of the integrated

CAN module. In addition to the CAN network, the

board also employs a LIN subnetwork using

Microchip’s PIC16C43X and PIC18F1320 device

families.

Each PICDEM CAN-LIN Demonstration Board includes

both firmware and PC software for simulating a CAN

network. The firmware comes preprogrammed on the

sample device. The PC software and documentation

are furnished on a CD-ROM.

Features

PICDEM CAN-LIN 1 supports:

• 68-pin PLCC PIC18C658 and 84-pin PLCC

PIC18C858 devices

• 20-pin PDIP PIC16C432 with integrated LIN bus

transceiver

PICDEM CAN-LIN 2 supports:

• 28-pin SPDIP PIC18F258 and 40-pin PDIP

PIC18F458 devices

• 20-pin PDIP PIC16C432 with integrated LIN bus

transceiver

PICDEM CAN-LIN 3 supports:

• 64-pin TQFP PIC18F6680 and 80-pin TQFP

PIC18F8680 devices

• 20-pin SSOP PIC18F1320 and MCP201 LIN bus

transceiver

The boards all share the following common features:

• On-board digital and analog +5V regulator for direct

input from 12V AC/DC wall adapter

• Two on-board CAN nodes and optional external CAN

bus connectors

• On-board LIN bus master and slave node

• Optional external LIN bus connector

• DB-9 RS-232 interface to IBM® compatible PC

• Two optional ICSP™ MPLAB® ICD 2 connectors

• Optional header for LCD panel

• CAN bus monitoring software for PC

• Devices preprogrammed with CAN bus monitoring

firmware

• Generous prototyping area

PICDEM™ CAN-LIN 1, 2 and 3

Demonstration Boards Contents

• PICDEM CAN-LIN PCB

• Serial Cable

• Sample Programs, Application Notes and

User’s Guide on CD

Ordering Information:

DM163007 PICDEM™ CAN-LIN 1 Demonstration Board

DM163011 PICDEM™ CAN-LIN 2 Demonstration Board

DM163015 PICDEM™ CAN-LIN 3 Demonstration Board

DS51418

“

PICDEM

™

CAN-LIN 1, 2 and 3 Demonstration Boards Product Overview

”

(Available at www.microchip.com)

PICmicro® MCU Demo Boards and Kits

PICDEM™ LIN Demonstration Kit

The PICDEM LIN Demonstration Kit demonstrates the

capabilities of several Microchip microcontrollers using

the LIN bus protocol. It supports slave node

applications with PIC16C432, PIC16C433,

PIC16C7XX and master node applications with

PIC16X8X and PIC18FXX8. PIC16C432 and

PIC16C433 have on-board LIN transceivers according

to LIN bus specification V1.2.

This kit can be used to develop LIN hardware and

software modules; demonstrate the LIN protocol in

simple distribution network; evaluate the PIC16C432

LIN transceiver device; and quickly learn the LIN bus

interface. Integrate/interface LIN bus into product for

proof-of-concept demonstration.

Features

• 18, 28 and 40-pin DIP sockets (Although three

sockets are provided, only one device may be used

at a time.)

• On-board +12V regulator for direct input from 12V

• RS-232C socket and associated hardware for direct

connection to RS-232C interface

• CAN bus interface

• Control panel interface for LIN bus master

• RF stage for keyless entry function

• Seat memory unit

• Motor control slave unit

PICDEM™ LIN Demonstration Kit Contents

• PICDEM LIN Demonstration Boards (2)

• PIC16F874 – used as master in the LIN

communication

• PIC16C432, PIC16C433 – used as slaves in

LIN communication; both have on-board LIN

transceiver

• Serial Cable

• “PICDEM

™

LIN User’s Guide”

Ordering Information:

DM163005 PICDEM™ LIN Demonstration Kit

Development Systems Ordering Guide

PICDEM.net™ Demonstration/Evaluation Board

The PICDEM.net

Demonstration

Board is an

Internet/Ethernet

demonstration

board using the

PIC18F452

microcontroller

and TCP/IP

firmware. It connects the PICmicro® MCU to the Local

Area Network (LAN). It is a complete kit that is easy-to-

use (a PC is required for setup). Interconnection to a

network can be accomplished in less than one hour.

The board conforms to the standard 40-pin pinout used

by the PIC16F877 or PIC18F452. The firmware used

for the network interface was developed by Jeremy

Bentham of Iosoft Ltd. based on his book

“TCP/IP

Lean: Web Servers for Embedded Systems”

(ISBN: 157820108X).

The PICDEM.net Demonstration Board is also

equipped with a 6-pin modular connector to interface

directly with the Microchip MPLAB® ICD 2 In-Circuit

Debugger. With the addition of the MPLAB ICD 2 (sold

separately), the developer can modify the on-board

PICmicro microcontroller to meet the specific needs.

A generous breadboarding area is also available for

experimental circuits or to add an embedded modem

for dial-up capability, if desired. It includes several

status indicators, including a 16 x 2 LCD indicator.

PICDEM.net™ Demonstration/Evaluation

Board Contents

• PICDEM.net Demonstration Board with

Firmware and PIC18F452 Microcontroller

• CAT 5 Ethernet Cable

• DB9 Serial Cable

• Universal Power Supply

• Software Demo and

“PICDEM.net

™

Embedded

Internet/Ethernet Demonstration Board User’s

Guide”

on CD

Ordering Information:

DM163004-LT PICDEM.net™ Demonstration/Evaluation Board (Textbook not included)

Related Text:

“TCP/IP Lean: Web Servers for Embedded Systems”

(ISBN: 157820108X)

DS51240

“

PICDEM.net

™

Internet/Ethernet Demonstration Board Product Overview

”

(Available at www.microchip.com)

PICmicro® MCU Demo Boards and Kits

Low-Power Solutions Demonstration Board

The Low-Power

Solutions

Demonstration

Board provides

designers a

convenient and fun

way to explore

PICmicro® MCU

nanoWatt features

within a functional ultrasonic range finder application. It

features the PIC18F4620, Microchip Technology’s latest

power-managed device.

The development tool is ideal for learning nanoWatt

features and implementing system power reduction

techniques. The Low-Power Solutions Demonstration

Board is part of the Workshop-in-a-Box 2, a complete

nanoWatt training kit designed for self-paced and

instructor led training.

The Low-Power Solutions Demonstration Board CD

includes three self-paced, step-by-step lab exercises,

using the PIC18F4620, which illustrate the following

concepts: nanoWatt features to reduce power

consumption, improving system power consumption

and improving board performance.

Features

• Fully functional ultrasonic range finder with LCD

display (PCB also supports four 7-segment LEDs)

• DC boost circuit

•USART

• Connector for MPLAB® ICD 2 In-Circuit Debugger

• Two power supply options: 9V power supply or

9V battery

• Test points to measure system and PICmicro device

power consumption via current meter

• Three switches for input and a Reset switch and

2 LEDs

• Microchip TC1047A Temperature Sensor

• In-Circuit Debugger (ICD) connector for programming

via In-Circuit Serial Programming™ (ICSP™)

technology or developing with the MPLAB® ICD 2

Low-Power Solutions

Demonstration Board Contents

• Low-Power Solutions Demonstration Board

• Software and Documentation CD

Ordering Information:

DM163026 Low-Power Solutions Demonstration Board

DS51521

“Low-Power Solutions Demonstration Board Product Overview”

NEW

Development Systems Ordering Guide

NOTES:

This section contains the following major topics:

dsPICDEM™ Starter Development Board.................................................................................70

dsPICDEM™ 28-Pin Starter Development Board .....................................................................71

dsPICDEM™ 1.1 General Purpose Development Board..........................................................72

dsPICDEM™ 2 Development Board .........................................................................................73

dsPICDEM™ MC1 Motor Control Development Board.............................................................74

dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards ......................75

dsPIC® DSC DEVELOPMENT BOARDS, KITS

Development Systems Ordering Guide

dsPICDEM™ Starter Development Board

The low-cost dsPICDEM™ Starter Development Board

allows the user to easily validate a development tool

setup using the dsPIC30F. It has a power supply

regulator, crystal oscillator, MPLAB® ICD header, serial

port, LEDs, push buttons, potentiometer and a

prototyping area. In addition, all pins on the dsPIC®

DSC device are brought out to a terminal block for

access.

Features

• 5V power supply split at the regulator to provide a

separate, decoupled analog supply voltage, useful in

designs taking advantage of the 12-bit A/D Converter.

• Analog peripherals including an MCP41010 digital

potentiometer used as a DAC to generate signals,

and a MCP6022 to provide output filtering for the

DAC and an input filter for the 12-bit A/D. The filter

cutoff frequencies are set to 4 kHz to allow telephone

quality signals.

The dsPICDEM Starter Development Board is

delivered with a demo application that uses the digital

potentiometer to generate audio tones. This output can

be connected into the 12-bit ADC for measurement.

dsPICDEM™ Starter Development Board Contents

• dsPICDEM Starter Development Board

• Documentation

Ordering Information:

DM300016 dsPICDEM™ Starter Development Board

DV164030 MPLAB® ICD 2 with dsPICDEM™ Starter Development Board

DS51430

“dsPICDEM

™

Starter Development Board Product Overview”

(Available at www.microchip.com)

dsPIC® DSC Development Boards, Kits

dsPICDEM™ 28-Pin Starter Development Board

The low-cost dsPICDEM 28-Pin Starter Development

Board allows the user to easily validate a development

tool setup using a 28-pin SDIP or SOIC dsPIC30F

device. The development board has a socketed

dsPIC30F2010 digital signal controller, power supply

regulator, crystal oscillator, MPLAB® ICD header, serial

port, power-on indicator, Reset push button, 28L SOIC

layout pad and a prototyping area.

Features

• dsPIC30F2010 28-pin SDIP sample device and

socket

• Power input from 9V supply

• Connector for MPLAB ICD 2 In-Circuit Debugger

• RS-232 interface

• Header for access to all device I/O pins

• Layout pad for 28-pin SOIC device

• Prototyping area

• Power-on demo program demonstrating

interrupts, device I/O and UART communication

• A tutorial program in Assembly code showing the

user how to set up a project in MPLAB IDE

dsPICDEM™ 28-PIn Starter

Development Board Contents

• dsPICDEM 28-pin Starter Development Board

• Documentation on CD

Ordering Information:

DM300017 dsPICDEM™ 28-Pin Starter Development Board

DS51458

“dsPICDEM

™

28-Pin Starter Development Board Product Overview”

(Available at www.microchip.com)

Development Systems Ordering Guide

dsPICDEM™ 1.1 General Purpose

Development Board

The dsPICDEM 1.1

General Purpose

Development

Board provides

the application

designer with a

low-cost

development tool to

become familiar

with the dsPIC30F

16-bit architecture, high-performance peripherals and

powerful instruction set.

The board features an active demonstration program

loaded on the installed dsPIC30F6014 device. Several

program functions are selectable via a menu system

displayed on the LCD. These include: temperature and

voltage measurements, frequency domain

characteristics of a sine-wave signal generated

on-board from a digital potentiometer, FIR and IIR

digital filter selections and DTMF tone generation using

the codec interface peripheral (external speaker

required).

Also included is a simple tutorial written in Assembly

language. Users can create a project, assemble and

link the code, program and/or debug the code using

Microchip’s MPLAB® IDE (Integrated Development

Environment) – included free, and an MPLAB ICD 2

In-Circuit Debugger – available separately.

The development board serves as an ideal prototyping

tool to quickly develop and validate key design

requirements.

Features

• dsPIC30F6014 MCU plug-in sample

• Serial communication channels interface

(two UARTs, SPI™, CAN, RS-485)

• Si3000 codec with line in/out jacks

• General purpose prototyping area with expansion

header

• 122 x 32 dot addressable LCD

• MPLAB ICD 2 and MPLAB ICE 4000 emulator

support

• LEDs, switches and potentiometers

• Temperature sensor

• Separate digital and analog voltage regulators

• Digital potentiometer for DAC capability

dsPICDEM™ 1.1 General Purpose

Development Board Contents

• dsPICDEM 1.1 General Purpose Development

Board with Preprogrammed dsPIC30F Device

• RS-232 Cable

• Power Supply

• Example Software and Documentation on CD

Ordering Information:

DM300014 dsPICDEM™ 1.1 General Purpose Development Board

DV164032 MPLAB® ICD 2 with dsPICDEM 1.1 General Purpose Development Board

DS51433

“

dsPICDEM

™

1.1 General Purpose

Development

Board

Product Overview”

(Available at www.microchip.com)

dsPIC® DSC Development Boards, Kits

dsPICDEM™ 2 Development Board

The dsPICDEM™ 2

Development Board is a

development and evaluation

tool that helps you create

embedded applications

using dsPIC30F Digital

Signal Controllers. Sockets

are provided for 28 and

40-pin devices in the motor

control family and 18, 28

and 40-pin devices in the

general purpose and sensor

family. The supported

devices are shown in the table below.

The board includes a sample dsPIC30F4011 Digital

Signal Controller in the 40-pin motor control socket, a

power supply regulator, crystal oscillators for each set of

sockets, an ICD connector for the MPLAB®

ICD 2 In-Circuit Debugger and both RS-232 and CAN

ports for external communication. In addition, the board

is populated with prototyping hardware, including LED

indicators, push button switches, a potentiometer, a

temperature sensor and a 2x16 LCD screen. All pins on

all the device sockets are accessible through headers.

Features

Key features of the dsPICDEM 2 Development Board

include:

• Multiple sockets for 18, 28 and 40-pin PDIP and

SPDIP devices

• Sample application programs complete with

MPLAB® IDE workspace and project files provided

for supported dsPIC30F devices

• dsPIC30F4011 40-pin PDIP sample device installed

on the board

• 5V regulator provides VDD and AVDD from a 9V DC

power supply

• MPLAB ICD 2 In-Circuit Debugger ready:

- Options for selecting alternate debugging

channels

• MPLAB ICE 4000 ready

• RS-232 interface

• Controller Area Network (CAN) interface

• Temperature sensor and analog potentiometer to

simulate A/D inputs

• 2 push button switches and 2 LED indicators to

simulate digital input and output

• 2 x 16 ASCII Character LCD with SPI™ interface

• Access to all pins on the dsPIC30F device sockets

via 2 x 40-pin prototyping header (header shown in

picture is not provided with the board)

dsPIC30F Device Supported Packages

Motor Control

dsPIC30F2010 28-pin SPDIP

dsPIC30F3010 28-pin SPDIP

dsPIC30F4012 28-pin SPDIP

dsPIC30F3011 40-pin PDIP

dsPIC30F4011 40-pin PDIP

Sensor Family

dsPIC30F2011 18-pin PDIP

dsPIC30F3012 18-pin SPDI

dsPIC30F2011 28-pin SPDIP

dsPIC30F3013 28-pin SPDIP

General Purpose Family

dsPIC30F3014 40-pin PDIP

dsPIC30F4013 40-pin PDIP

dsPICDEM™ 2 Development Board Contents

• dsPICDEM 2 Development Board with

dsPIC30F4011 device

• dsPICDEM 2 Sample Kit (including

dsPIC30F3012 and dsPIC30F3014

• Software and Documentation CD

Ordering Information:

DM300018 dsPICDEM™ 2 Development Board

DS70147

“dsPICDEM

™

2 Development Board Product Overview”

(Available at www.microchip.com)

NEW

Development Systems Ordering Guide

dsPICDEM™ MC1 Motor Control Development Board

The MC1 Motor Control Development Board provides

the application developer with three main components

for quick prototyping and validation of BLDC, PMAC

and ACIM applications. The three main components

are: dsPIC30F motor control main board, 3-phase,

low-voltage power module and 3-phase, high-voltage

power module

The main control board contains the dsPIC30F6010

(but also supports all dsPIC® DSC motor control

variances), various peripheral interfaces and a custom

interface header system, which allows different motor

power modules to be connected to the PCB. The

control board also has connectors for mechanical

position sensors, such as incremental rotary encoders

and hall effect sensors, and a breadboard area for

custom circuits. The main control board receives its

power from a standard plug-in transformer.

The low-voltage power module is optimized for 3-phase

motor applications that require a DC bus voltage less

than 50 volts and can deliver up to 400W power output.

The 3-phase, low-voltage power module is intended to

power BLDC and PMAC motors.

The high-voltage power module is optimized for

3-phase motor applications that require DC bus

voltages up to 400 volts and can deliver up to 1 kW

power output. The high-voltage module has an active

power factor correction circuit that is controlled by the

dsPIC30F device. This power module is intended for

AC induction motor and power inverter applications

that operate directly from the AC line voltage.

Features

• dsPIC30F6010 motor control MCU-based board

• 3-phase, low-voltage power module (optional)

• 3-phase, high-voltage power module (optional)

• Heat sink for ambient cooling of power sections

• Full automatic protection of power circuits

• Electrical isolation from power circuits

• Many options for motor feedback signals

dsPICDEM™ MC1 Motor Control

Development Board Contents

• dsPICDEM MC1 Motor Control Development

Board with Preprogrammed dsPIC30F Device

• RS-232 Cable

• Power Supply

• Example Software and Documentation on CD

Ordering Information:

DM300020 dsPICDEM™ MC1 Motor Control Development Board

DM300021 dsPICDEM™ MC1H 3-Phase High-Voltage Power Module

DM300022 dsPICDEM™ MC1L 3-Phase Low-Voltage Power Module

AC300020 24V BLDC Motor

AC300021 3-Phase ACIM

MA18F4431 PIC18F4431 Plug-in Module

DS51429

“

dsPICDEM

™

MC1 Motor Control

Development

System Product Overview

”

(Available at www.microchip.com)

dsPIC® DSC Development Boards, Kits

dsPICDEM.net™ 1 and dsPICDEM.net™ 2

Connectivity Development Boards

The dsPICDEM.net 1

and dsPICDEM.net 2

Connectivity

Development

Boards provide the

application developer

a basic platform for

developing and

evaluating both

connectivity and non-

connectivity-based requirements. The dsPICDEM.net

Development Boards provide the hardware circuitry for

supporting both the Public Switched Telephone Network

(PSTN) and 10baseT MAC/PHY interfaces. The PSTN

interface hardware on the dsPICDEM.net 1 Development

Board is suited for FCC/JATE compliancy. CTR-21

compliancy is supported on the dsPICDEM.net 2

Development Board.

The board comes with an ITU-T compliant V.22bis/V.22

modem demonstration module preprogrammed on the

installed dsPIC30F6014 device. This demo, provided

with full source code, enables the user to connect and

transfer data between the dsPIC® DSC Soft Modem

and an ITU-T compliant reference modem. The modem

can be configured for either the Originate or Answer

mode of operation. Configuration and control of the

dsPIC DSC Soft Modem demo is supported with an

optimized AT command set which is entered into a

suitable communication program running on the PC,

such as HyperTerminal, and communicated to the

dsPIC® DSC device over a RS-232 serial channel.

Also included are the CMX-MicroNet WEB and FTP

Server programs, which demonstrate two TCP/IP

protocol-based applications over the 10baseT Ethernet

Datalink layer.

Features

• dsPIC30F6014 plug-in sample

• 10baseT ethernet MAC and PHY interface

• PSTN interface with DAA/AFE chipset

• Serial communication channels interface (UART and

CAN)

• External I2C™ EEPROM memory for storing

constants

• External 64K x 16 SRAM memory

• General purpose prototyping area with expansion

header

• Dual channel digital potentiometer

• 2 x 16 LCD display

• MPLAB® ICD 2 and MPLAB ICE 4000 emulator

support

• LEDs, switches and potentiometers

• Temperature sensor

dsPICDEM.net™ 1 and dsPICDEM.net 2

Connectivity Development Boards Contents

• dsPICDEM.net Connectivity Development Board

with Preprogrammed dsPIC30F6014 Device

• RS-232 Cable

• CAT 5 Crossover Cable

• Power Supply

• Example Software and Documentation on CD

Ordering Information:

DM300004-1 dsPICDEM.net™ 1 Connectivity Development Board (supporting FCC/JATE PSTN, Ethernet NIC)

DM300004-2 dsPICDEM.net™ 2 Connectivity Development Board (supporting CTR-21 PSTN, Ethernet NIC)

DS51431

“dsPICDEM.net

™

1 and dsPICDEM.net

™

2 Connectivity Development Boards Product Overview”

(Available at www.microchip.com)

Development Systems Ordering Guide

NOTES:

© 2005 Microchip Technology Inc. DS30177T-page 77
This section contains the following major topics:
PICDEM™ MSC1 Demonstration Kit ........................................................................................78
PICDEM™ MSC1 Daughter Boards..........................................................................................79
MCP41XXX/42XXX Digital Potentiometer Evaluation Board ....................................................80
MXDEV® 1 Analog Evaluation System Driver Board ................................................................81
MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit....................82
MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit ....................83
Fan Controllers and Serial Temperature Sensor Demo Boards................................................84
MCP2510 CAN Developer’s Kit ................................................................................................85
MCP250XX CAN I/O Expander Developer’s Kit........................................................................86
MCP2120/2150 Infrared Developer’s Kit...................................................................................87
SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit.............................................88
13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360 .....................89
13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X ..... 90
Interface Products .......................................................................................................................... 91
Linear Products .............................................................................................................................. 91
Mixed-Signal Products ................................................................................................................... 92
Power Management Products........................................................................................................ 93
Thermal Management Products.....................................................................................................94
Analog Software Tools ................................................................................................................... 95
ANALOG AND MIXED-SIGNAL
DEMO BOARDS AND KITS

Development Systems Ordering Guide

PICDEM™ MSC1 Demonstration Kit

The PICDEM

MSC1

Demonstration Kit

with its PC-based

Graphical User

Interface (GUI)

software serves as

a demonstration

board for the

PIC16C781/782

microcontrollers. The user can configure the

PIC16C781/782 from the easy-to-use PC software and

download it to the microcontroller to evaluate the

various peripherals and interconnect configurations.

The GUI gives instant access to the PIC16C781/782

peripherals, allowing on-the-fly configuration changes

by means of an RS-232 link between the PC and the

evaluation board.

Initialization assembly code, corresponding to the

selected configuration, can be built using the supplied

code generator. Developers can use the code

generation to perform an entire configuration using the

evaluation tool and save it as a disk file.

Features

• Demonstrates all the PIC16C781/782 peripherals

• Large breadboard area

• Easy-to-use PC-based GUI for:

- Configuration of peripheral blocks

- Download configuration to hardware

- Save configuration setup and import into

MPLAB® IDE

PICDEM™ MSC1 Demonstration Kit Contents

• PICDEM MSC1 Demonstration Board

•Jumper Wires

• Serial Cable

• CD with GUI Interface Program

Ordering Information:

DM163012 PICDEM™ MSC1 Demonstration Kit

Analog and Mixed-Signal Demo Boards and Kits

PICDEM™ MSC1 Daughter Boards

The following daughter boards, available separately,

demonstrate additional capabilities of the

PIC16C781/782 microcontrollers.

PICDEM™ MSC1 Switch Mode Power Supply

(SMPS) Daughter Board

The PICDEM™ MSC1 Switch Mode Power Supply

(SMPS) Daughter Board, in combination with the

PICDEM MSC1 Demonstration Board, is a complete

demonstration and evaluation kit for designing Switch

mode power supplies using the PIC16C781/782. The

daughter board can be configured for the following

Switch mode power supply topologies:

• Boost: Output voltage greater than the supply voltage

• Buck: Output voltage less than the supply voltage

• Buck-Boost: Output voltage less than or greater than

the supply voltage

• Invert: Negative output voltages

PICDEM™ MSC1 Infrared (IR) Driver

Daughter Board

The PICDEM™ MSC1 Infrared (IR) Driver Daughter

Board, in combination with the PICDEM MSC1

Demonstration Board, serves as a demonstration and

evaluation kit for designing a high-power, IR remote

control transmitter using the PIC16C782. The daughter

board, in combination with the included IR receiver,

implements both receive and transmit sections of a

Pulse-Width Modulation (PWM) IR remote control

system.

PICDEM™ MSC1 Delta-Sigma ADC

Daughter Board

The PICDEM™ MSC1 Delta-Sigma ADC Daughter

Board, in combination with the PICDEM MSC1

Demonstration Board, serves as a demonstration

and evaluation kit for designing high-resolution,

Delta-Sigma Analog-to-Digital Converters using the

PIC16C781/782. The daughter board has the following

features:

• All the components required to implement an 8 to

16-bit Delta-Sigma ADC

• An RCA connector for connecting an external sensor

• A generous prototyping area for building signal

conditioning circuitry

• An on-board temperature sensor for a demonstration

input to the ADC

PICDEM™ MSC1 Flow Rate Sensor

Daughter Board

The PICDEM™ MSC1 Flow Rate Sensor Daughter

Board, in combination with the PICDEM MSC1

Demonstration Board, is a complete demonstration kit

for a high sensitivity, hot-wire anemometer styled flow

rate sensor using the PIC16C782.

PICDEM™ MSC1 Daughter Boards Contents

• PICDEM MSC1 Daughter Board

• Complete Documentation

Ordering Information:

AC163001 PICDEM MSC1 Switch Mode Power Supply (SMPS) Daughter Board

AC163002 PICDEM MSC1 Infrared (IR) Driver Daughter Board

AC163003 PICDEM MSC1 Delta-Sigma ADC Daughter Board

AC163004 PICDEM MSC1 Flow Rate Sensor Daughter Board

Development Systems Ordering Guide

MCP41XXX/42XXX Digital Potentiometer

Evaluation Board

The MCP41XXX/42XXX Evaluation Board is a

demonstration and evaluation tool for Microchip

Technology’s MCP41XXX/42XXX digital

potentiometers. The MCP41XXX/42XXX Evaluation

Board is designed to be used in conjunction with the

MXDEV® Evaluation System. When connected to the

driver board with the included microcontroller installed,

this evaluation board allows for the programming and

evaluation of the MCP41XXX/42XXX digital

potentiometer in a variety of applications.

Some of the applications that can be used for

evaluation of the MCP41XXX/42XXX digital

potentiometers include an offset circuit, low-pass filter

and gain circuits. A removable prototype area is

available for quick-turn circuit evaluation. Evaluation of

other operations, such as daisy chain, shutdown and

Reset, are also available. Software tools for the digital

potentiometer and ADC are also provided for

evaluation.

MCP41XXX/42XXX Digital Potentiometer

Evaluation Board Contents

• MCP41XXX/42XXX Evaluation Board

• Removable Prototype Board

• MCP41XXX/42XXX Samples and

Reprogrammable Microchip Flash PICmicro®

MCU

• MXLAB® IDE ADC Software

• RS-232 Cable

• 9V DC Power Supply

• Documentation, including the

“MCP42XXX

Evaluation Board User’s Guide”

Ordering Information:

DV42XXX MCP41XXX/42XXX Digital Potentiometer Evaluation Board

Analog and Mixed-Signal Demo Boards and Kits

MXDEV® 1 Analog Evaluation System Driver Board

The MXDEV 1 Analog Evaluation System gives system

designers the ability to control Microchip stand-alone

analog devices, acquire data and then analyze the data

using strip-charts, histograms and Fast Fourier

Transforms (FFTs). User-friendly data analysis

software is included with the device-specific daughter

boards.

The evaluation system consists of two parts: a driver

board, which performs the data analysis and connects

to a PC for subsequent analysis and display and a

daughter board, which plugs into the driver board and

contains the device to be evaluated. Device-specific

software is included.

In addition to the ability of the driver board to work with

device-specific daughter boards, users can create their

own daughter boards based on their own design

requirements. In addition, a prototype area on the

driver board is available for user-designed circuits that

could be used in place of the daughter boards.

The MXDEV 1 Analog Evaluation System Driver Board

contains three different PICmicro® microcontroller

sockets (28-pin, 18-pin and 8-pin), so that users can

choose the PICmicro MCU most suited to their

application. It also includes an LCD display, an LED

display socket, SRAM for data storage and an RS-232

interface. The LCD display can display information,

such as configuration data and acquisition data from

the daughter board.

The daughter board kits contain the device to be

evaluated and a PIC16F876 Flash microcontroller

containing device-specific code. The microcontroller

then plugs into one of the sockets on the DVMCPA.

Code is also provided that shows how to interface the

PIC16C54 and the PIC12C509 with the ADC.

MXDEV® 1 Analog Evaluation System

Driver Board Contents

• Driver Board

• Microcontroller Samples

• RS-232 Cable

• MXLAB® IDE ADC Software

• Two Power Supplies

• Documentation, including the

“Analog

Evaluation System Driver Board User’s Guide”

Ordering Information:

DVMCPA MXDEV® 1 Analog Evaluation System Driver Board

Development Systems Ordering Guide

MXDEV® 1 MCP3XXX Single/Dual ADC

Evaluation System Daughter Board Kit

The MXDEV 1 MCP3XXX Single/Dual ADC Evaluation

System Daughter Board Kit supports the following

devices: MCP3001, MCP3002, MCP3201, MCP3202

and MCP3301.

This kit includes jumper-selectable options for

maximum flexibility. Choices include:

• Selection of the signal source between the on-board

potentiometer and an external source.

• Selection of the ADC reference voltage between the

on-board VREF and an external source.

• Selection between single-ended and pseudo-

differential inputs (depending on the device being

evaluated).

There is a prototype area on the board for additional

circuitry as needed.

MXDEV® 1 MCP3XXX Single/Dual ADC

Evaluation System Daughter Board Kit Contents

• MXDEV 1 MCP3XXX Single/Dual ADC

Daughter Board

• Filter Boards

• Samples for all Supported A/D Converts and

Preprogrammed PICmicro® MCU for use in the

Driver Board

• Adapter Plugs

• MXLAB® IDE ADC Software

• Documentation, including the

“MCP3XXX A/D

Converter Evaluation Kit User’s Guide”

Ordering Information:

DV3201A MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit

Analog and Mixed-Signal Demo Boards and Kits

MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation

System Daughter Board Kit

The MXDEV 1 MCP3XXX Quad/Octal ADC Evaluation

System Daughter Board Kit supports the following

devices: MCP3004, MCP3008, MCP3204, MCP3208,

MCP3302 and MCP3304.

This kit includes jumper-selectable options for

maximum flexibility. Choices include:

• Selection of the signal source between the on-board

potentiometer and an external source.

• Selection of the ADC reference voltage between the

on-board VREF and an external source.

• Selection between single-ended and pseudo-

differential inputs (depending on the device being

evaluated).

There is a prototype area on the board for additional

circuitry as needed.

MXDEV® 1 MCP3XXX Quad/Octal

Evaluation System Daughter Board Kit Contents

• MCP3XXX Quad/Octal Daughter Board

• Filter Boards

• Samples for all Supported A/D Converts and

Preprogrammed PICmicro® MCU for use in the

Driver Board

• Adapter Plugs

• MXLAB® IDE ADC Software

• Documentation, including the

“MCP3XXX A/D

Converter Evaluation Kit User’s Guide”

Ordering Information:

DV3204A MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit

Development Systems Ordering Guide

Fan Controllers and Serial Temperature Sensor

Demo Boards

TC642EV – Evaluation Kit for Brushless

DC Fan Controllers

The TC642EV is a complete evaluation kit for

evaluating and prototyping brushless DC fan control

circuits using Microchip’s TC642, TC646, TC647,

TC648 and TC649 BDC fan controllers. The fan speed

control signal can be provided by an external sensor or

voltage signal, or from the on-board potentiometer.

Minimum speed setting and auto-shutdown threshold

are conveniently set by a potentiometer. Jumper blocks

allow the user to quickly configure the output stage and

input signal source and scaling. Test points provide

easy access for instrument readings at critical nodes. A

user prototyping area is provided for dedicated circuitry

or other user specific circuits.

TC642DEMO – Fan Controller Demo Board for

TC642/646/647/648/649

This Fan Controller Demo Board allows the user to

quickly prototype fan control circuits based on

Microchip’s PWM fan control ICs (TC642, TC646,

TC647, TC648 or TC649). This 1.5" by 2.0" board’s

versatile sensor input and output driver circuitry allows

the Fan Controller Demo Board to be used with

virtually any brushless DC fan and standard thermistor.

An optional LED status indicator gives a visual

indication of a fan Fault condition (open stator, blocked

rotor or overtemperature Fault detection). It uses

through-hole components for easy user modification.

TC650DEMO – Fan Controller Demo Board for

TC650/651

This 1.0" x 1.0" Fan Controller Demo Board allows the

user to quickly prototype fan control circuits based on

Microchip’s TC650 or TC651 PWM Fan Control ICs.

The board can interface with virtually any brushless DC

fan. A red LED status indicator gives visual indication

of a fan Fault condition (open stator or blocked rotor)

and a green LED status indicator gives a visual

indication of an overtemperature alert (temperature is

10°C higher than the high temperature limit).

TC652DEMO – Fan Controller Demo Board for

TC652/653

This 1.0" x 1.2" Fan Controller Demo Board allows the

user to quickly prototype fan control circuits based on

Microchip’s TC652 or TC653 PWM fan control ICs. The

board can interface with virtually any brushless DC fan.

A red LED status indicator gives visual indication of a

fan Fault condition (open stator or blocked rotor) and a

green LED status indicator gives a visual indication of

an overtemperature alert (temperature is 10°C higher

than the high temperature limit).

TC74DEMO – Serial Digital Temperature

Sensor Demo Board

The TC74DEMO Board allows the user to evaluate the

functionality of the tiny TC74 thermal sensor and

perform comparative evaluation against other thermal

management solutions. This 0.75" by 2.5" PC board is

an ideal solution for identifying the temperature profile

of applications like datacom, telecom and PC

equipment. The easy-to-use software provides a visual

representation of temperature profile and can interface

with any PC.

Ordering Information:

TC642EV TC642EV Evaluation Kit for Brushless DC Fan Controllers

DS51252

“

TC642EV Evaluation Kit for Brushless DC Fan Controllers TC64X Product Overview

”

TC642DEMO TC642DEMO Fan Controller Demo Board for TC642/646/647/648/649

DS51251

“

TC642DEMO Fan Control Module for TC64X Family Product Overview

”

TC650DEMO TC650DEMO Fan Controller Demo Board for TC650/651

TC652DEMO TC652DEMO Fan Controller Demo Board for TC652/653

DS51254

“

TC650DEMO and TC652DEMO Fan Controller Demo Boards for TC650/1/2/3 Product Overview

”

TC74DEMO TC74DEMO Serial Digital Temperature Sensor Demo Board

DS51253

“

TC74DEMO Serial Thermal Sensor Demo Board for TC74 Product Overview

”

Analog and Mixed-Signal Demo Boards and Kits

MCP2510 CAN Developer’s Kit

The MCP2510 CAN Developer’s Kit is a multi-function

tool that speeds implementation of the MCP2510

stand-alone CAN controller by offering functions for

controlling its feature set.

In addition, this tool can be used to demonstrate basic

CAN input/output functionality and monitor bus activity

on the user’s CAN bus. It is ideal for new CAN users

that want to understand how CAN may be used for

network communication.

MCP2510 CAN Developer’s Kit Contents

• MCP2510 Target Board

• User Interface Software

(runs under Windows® 95/98)

• PC Parallel Port Interface Cable

• Power Supply

• Documentation, including

“MCP2510

Development Kit User’s Guide”

Ordering Information:

DV251001 MCP2510 CAN Developer’s Kit

Development Systems Ordering Guide

MCP250XX CAN I/O Expander Developer’s Kit

The MCP250XX CAN I/O Expander Developer’s Kit

includes everything needed to create a CAN-based

system using Microchip’s CAN I/O expander family. It

can be used to evaluate, demonstrate and develop

CAN nodes using these CAN I/O expanders. The

Demonstration mode has an MCP25050 that is

configured prior to shipping and is programmed to

manipulate analog inputs via potentiometers, PWM

outputs via a piezoelectric buzzer and an incandescent

lamp, and digital inputs via push button switches. CAN

messages can be sent and received between the

master node and the demonstration node via the

PC-user interface or via the input/output functionality

discussed above. Users can also set up a watch

window to display the message traffic as they

manipulate the inputs and outputs. In this manner, the

users can see a working network being demonstrated

with one of the nodes being an MCP25050 CAN I/O

expander device.

Another function of the developer’s kit is that the PC,

with included software, can be used to emulate an

MCP250XX device. This mode is used to manipulate

the registers of the MCP250XX devices in order to

evaluate all of the different functionality and

configurations of the device family. After users are

comfortable with a configuration, they can then

prototype their own CAN node. An unconfigured

MCP250XX device is supplied with prototyping area,

also included on the target board. A header is provided

to enable oscilloscope access to the I/O pins for

development and troubleshooting. Once prototyping is

complete, the kit can be used to program up the device

configuration in much the same manner that Microchip

PICmicro® MCUs are programmed.

Features

• Speeds understanding of CAN I/O expander family

• Provides ability to prototype user-defined CAN node

• Enables programming of device default

configuration directly from developer’s kit

• Allows connection of external CAN networks

• Software watch window can be used as a basic CAN

bus monitor

MCP250XX CAN I/O Expander

Developer’s Kit Contents

• Target Board with Three CAN Nodes Connected

via a CAN Bus

• MCP250XX Product Samples

• PC Software to Interface to the Target Board

• PC Parallel Port Interface Cable

• Power Supply

• Complete Documentation

Ordering Information:

DV250501 MCP250XX CAN I/O Expander Developer’s Kit

DS51260

“MCP25020/25025/25050/25055 CAN I/O Expanders Developer’s Kit Product Overview”

(Available at www.microchip.com)

Analog and Mixed-Signal Demo Boards and Kits

MCP2120/2150 Infrared Developer’s Kit

The MCP2120/2150 Infrared Developer’s Kit includes

everything needed to create a system that

communicates using infrared wireless communication.

It educates the designer on the IR communications

technology and IrDA® protocol and can then be used to

integrate these technologies into the designer’s

product allowing proof of concept.

The kit includes Microchip’s revolutionary MCP2150

Infrared Communications Controller supporting the

IrDA Standard. It can be set up to communicate with

other IrDA devices, like PDAs and mobile phones, as

well. Host interface can be selected as a UART (DB-9)

to a PC using Hyperlink, or as a Master controller/ASIC

to the header. The boards also offer two types of

transceivers: the component version (which is a lower

cost but complicated) or the integrated version (which

is simple but higher cost). The kit demonstrates two

PCs communicating with each other via IR.

MCP2120/2150 Infrared Developer’s Kit Contents

• Two MCP2120 IR Nodes

• One MCP2150 IR Node

•Product Samples

• Serial Cables

• Universal Power Supply

• Documentation

Ordering Information:

DM163008 MCP2120/2150 Infrared Developer’s Kit

DS51257

“MCP2120/2150 Infrared Products Developer’s Kit Product Overview”

(Available at www.microchip.com)

Development Systems Ordering Guide

SEEVAL

® 32 Serial EEPROM Evaluation System

Designer’s Kit

Microchip’s

SEEVAL 32

Serial EEPROM

Evaluation System

Designer’s Kit

supports all

Microchip serial

EEPROMs,

including future

devices. Through

the use of a ZIF

socket, standard DIP packages are directly supported.

The 8-lead SOIC, TSSOP, MSOP, DFN and 5-lead

SOT-23 packages can also be supported by using

separate third party adapters. The SEEVAL 32

Evaluation System gives the designer or system

integrator the ability to read, write, or erase any byte,

page, or the entire array, and to display, save, or load

this data as a file. The SEEVAL 32 Evaluation System

and its host software and firmware capabilities provide

support for all the current Windows operating systems,

including: Windows XP, Windows ME, Windows 2000,

Windows NT® 4.0 and also Windows 95/98.

The SEEVAL 32 Evaluation System provides advanced

features to aid in system integration and debug.

Through the use of test pins on the system, an

oscilloscope or other test equipment can be easily

connected to evaluate timing and voltage levels.

Through the SEEVAL 32 Evaluation System host

software, serial EEPROMs can be tested by reading

and writing data in the EEPROM under test and by

evaluating checksum data. Erase/write endurance can

also be measured by selecting a Continuous Loop

mode to repeatedly read/write/erase the EEPROM.

The SEEVAL 32 Serial EEPROM Evaluation System

Designer’s Kit also includes the Total Endurance™

Software Model, a powerful tool which can predict the

erase/write endurance of any given serial EEPROM

based upon its application parameters: temperature,

voltage, cycles per day and bytes per cycle.

SEEVAL® 32 Serial EEPROM Evaluation System

Designer’s Kit Contents

• Total Endurance Software Model

• SEEVAL 32 Evaluation System

• Serial EEPROM Sample Pack

• SEEVAL 32 Evaluation System Software

• RS-232 Interface Cable

• Power Supply

Ordering Information:

DV243002 SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit

Analog and Mixed-Signal Demo Boards and Kits

13.56 MHz Anticollision microID® Developer’s Kit for

MCRF355 and MCRF360

The 13.56 MHz microID Developer’s Kit is an easy-to-

use tool for design engineers at all skill levels. This kit

includes all the hardware, software, reference designs

and samples required to get started in 13.56 MHz RFID

designs.

This kit is intended to demonstrate basic operation of

the high-performance MCRF355 tagging chip and basic

design of a simple RFID reader.

microID® MCRF355 and MCRF360

Developer’s Kit Contents

• 13.56 MHz Anticollision Reader

• Contact Programmer

• Two Power Supplies

• Two RS-232 Cables

• rfLAB™ 13.56 Software Interface (runs under

Windows® 95/98, Windows 2000, Windows XP)

• Socketed Tags

• Flexible, Preprogrammed Performa™ tags by

Checkpoint Systems Inc.

• Samples in DIP Form

• Documentation, including a complete

“micro

RFID Product

13.56 MHz RFID System Design

Guide”

(Application Notes, Reference Designs

and Tutorials)

Ordering Information:

DV103003 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360

PG103003 microID® Contact Programmer Kit for MCRF355 and MCRF360

(This programmer is also included in the DV103006)

Development Systems Ordering Guide

13.56 MHz Anticollision microID® Developer’s Kit for

MCRF355, MCRF360 and MCRF45X

The 13.56 MHz microID Developer’s Kit is a high-

speed, long range, easy-to-use tool for design

engineers at all skill levels. This kit includes all the

hardware, software, reference designs and samples

required to get started in high-performance 13.56 MHz

RFID designs.

This kit is designed to demonstrate all 13.56 MHz RFID

devices, including MCRF355/360 and MCRF450/451/

452/455 and to provide a basic platform for

high-performance RFID reader design.

microID® MCRF355, MCRF360 and MCRF45X

Developer’s Kit Contents

• 13.56 MHz Read/Write Interrogator

• Contact Programmer for MCRF355/360

• Two Power Supplies

• Two RS-232 Cables

• rfLAB™ 13.56 Software Interface (runs under

Windows® 95/98, Windows 2000, Windows XP)

• Socketed Tags

• Flexible, Preprogrammed Performa™ tags by

Checkpoint Systems Inc.

• Samples in DIP Form

• Documentation including a complete

“micro

RFID Products 13.56 MHz RFID System Design

Guide”

(Application Notes, Reference Designs

and Tutorials)

Ordering Information:

DV103006 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360, MCRF45X

PG103003 microID® Contact Programmer Kit for MCRF355 and MCRF360

(This programmer is also included in the DV103006)

Analog and Mixed-Signal Demo Boards and Kits

Interface Products

MCP2510/2515 CAN Developer’s Kit

Ordering Information: V251001

Speeds up software development

and introduces CAN to those

unfamiliar with the protocol.

Combines a software

development tool with a CAN

message/communication tool.

MCP2140 IrDA® Wireless Temp Demo Board

Ordering Information: MCP2140DM-TMPSNS

Demonstrates the MCP2140 device

in a real-world application. Shows

how to integrate an IrDA® standard

port.

MCP250XX CAN I/O Expander

Developer’s Kit

Ordering Information: DV250501

Supports CAN V2.0B active with bus rates up to 1 Mb/s.

Includes a CAN node using the MCP250XX CAN I/O

Expander.

MCP215X Data Logger Demo Board

Ordering Information: MCP215XDM

Demonstrates the MCP2150 (or MCP2155) IrDA Standard

Protocol Stack Controller device in a real-world application.

Shows how to integrate an IrDA standard port into an

embedded system.

MCP2120/2150 Developer’s Kit

Ordering Information: DM163008

Includes everything needed to

create a system that uses infrared

to communicate. Kit contains two

MCP2120 developer’s boards and

one MCP2150 developer’s board.

Linear Products

MCP6SX2 PGA Photodiode PICtail™

Daughter Board

Ordering Information: MCP6SX2DM-PCTLPD

Opens possibilities to process other

sensor signals. Increases the number

of PIC® microcontroller I/O pins

available for other purposes. Features

a PNZ334 photodiode, MCP6001U

op amp and MCP6S22 and MCP6S92

Programmable Gain Amplifiers (PGA).

MCP6S22 PGA PICtail™ Daughter Board

Ordering Information: MCP6S22DM-PCTL

Helps evaluate and demonstrate Microchip’s MCP6S21/2/6/8

PGA family. Interfaces with Microchip’s PICkit™ 1 Flash

Starter Kit. Demonstrates firmware integration between PIC

microcontrollers and PGA devices, to modify and develop

firmware for your specific requirements. Board can be used in

Stand-Alone mode.

MCP6SX2 PGA Thermistor PICtail™

Daughter Board

Ordering Information: MCP6SX2DM-PCTLTH

Features MCP6S22 and

MCP6S92 PGAs. Helps

overcome nonlinear response

of the on-board NTC thermistor.

Opens possibilities of

temperature correcting another

sensor and increasing the

number of PIC microcontroller I/O pins available for other

purposes.

MCP6S2X PGA Evaluation Board

Ordering Information: MCP6S2XEV

Provides a versatile selection of

input channels and gains to evaluate

device performance. Board supports

multiple input signal sources. Two

devices can be cascaded to produce

gain to 1024 V/V.

Development Systems Ordering Guide

Linear Products (Cont.)

MCP3221 12-Bit A/D PICtail™

Daughter Board

Ordering Information: MCP3221DM-PCTL

The MCP3221 PICtail Daughter Board is designed to

demonstrate Microchip’s MCP3221 device. The daughter

board uses DataView™ Windows® software for a graphical

real-time data analysis from the board through USB. This

daughter board can also be used for firmware development

to the MCP3221 device using the PICkit 1 Flash Starter Kit.

MCP402X Digital Potentiometer

Evaluation Board Kit

Ordering Information: MCP402XEV

Exercises all of the features of the MCP402X Nonvolatile

Digital Potentiometer. Kit includes 2 PCBs, one populated

and one unpopulated. The PCB supports the 8-pin SOIC,

SOT-23-6 and SOT-23-5 MCP402X package variations and

the standard ICSP™ programming header used by the

Microchip BFMP low-cost programming tool.

Mixed-Signal Products

TC340X Delta-Sigma A/D Converter

Evaluation Kit

Ordering Information: TC3400EV

Supports all members of Microchip’s TC340X Sigma-Delta

A/D Converter family. Communicates with any TC340X parts

via a parallel printer port or from an external power supply.

Mixed-Signal PICtail™ Daughter Board

Ordering Information: MXSIGDM

Quickly and accurately evaluates performance of Microchip

DACs, A/D Converters, LDOs, VREFs and Operational

Amplifiers. Interfaces to the PICkit 1 Flash Starter Kit. Can use

with a PIC16F767 for stand-alone operation. Supports many

Microchip mixed-signal devices (surface mount footprint).

MXDEV® Analog Evaluation System

Ordering Information: DVMCPA

Versatile, easy-to-use

system helps evaluate

mixed-signal products.

Includes the DVMCPA MCP

Driver Board, which

provides data acquisition

and analysis/display in a

Windows® environment.

MCP42XXX Digital Pot MXDEV® Evaluation

System Daughter Board

Ordering Information: DV42XXX

Includes an evaluation board, prototype board, RS-232

cable, 9V DC power supply, MXLAB® IDE software, digital

potentiometers and a PIC microcontroller. Used with the

MXDEV® 1 Analog Evaluation System Driver Board

(available separately).

MCP3201/02 Single/Dual A/D Converter

MXDEV® Evaluation System Daughter Board

Ordering Information: DV3201A

Supports MCP3001, MCP3002, MCP3201 and MCP3202

stand-alone A/D Converters. Used with the MXDEV 1

MCP3XXX Single/Dual ADC Evaluation System Driver Board

(available separately).

MCP3204/08 MXDEV® Evaluation System

Daughter Board

Ordering Information: DV32XXX

Supports MCP3004, MCP3008, MCP3204 and MCP3208

stand-alone A/D Converters. Used with the MXDEV 1

MCP3XXX Single/Dual ADC Evaluation System Driver Board

(available separately).

Analog and Mixed-Signal Demo Boards and Kits

Power Management

Products

MCP1650 Boost Controller Evaluation Board

Ordering Information: MCP1650EV

Demonstrates the MCP165X Boost

Controller product family in two

high-power, boost converter

applications.

SOT-23-3 Voltage Supervisor

Evaluation Board

Ordering Information: VSUPEV

Quickly evaluates operation of Voltage Supervisors and

Voltage Detectors in the Microchip SOT-23-3 package.

Generic board evaluates SOT-23-3 devices (such as LDOs

and Voltage References). Four blank PCBs are included for

testing multiple devices.

MCP1630 NiMH Battery Charger

Demo Board

Ordering Information: MCP1630DM-NMC1

High-speed PWM interfaces to

PIC16LF818, providing a complete

NiMH battery charger with fuel gauge

capability. Minimizes external

inductor/capacitor cost. Performs

complex NiMH battery charger timing

functions. Protects battery circuit if a

Fault occurs.

MCP1601 Buck Regulator Evaluation Board

Ordering Information: MVCP1601EV

For both battery-powered and

distributed-power applications.

Operates over a 2.7V to 5.5V input

range while delivering 500 mA of

output current.

MCP7382X Li Ion Battery Charger

Evaluation Board

Ordering Information: MCP382XEV

Features three circuits utilizing the MCP73826, MCP73827

and MCP73828 devices to demonstrate simple, stand-alone,

linear charging of single cell Lithium Ion/Lithium Polymer

battery packs (battery packs are not included).

Power Management

Products (Cont.)

MCP7384X Li Ion Battery Charger

Evaluation Board

Ordering Information: MCP7384XEV

Three circuits use MCP73841, MCP73842 and MCP73843

devices to demonstrate simple, stand-alone, linear charging

of single or dual cell Lithium Ion/Lithium Polymer battery

packs (battery packs are not included).

MCP165X 3W White LED Demo Board

Ordering Information: MCP1650DM-LED1

Demonstrates the MCP165X Boost

Controller product family in a battery-

powered white LED application with

an input voltage range of 2.0V to

4.5V.

MCP1726 LDO Evaluation Board

Ordering Information: MCP1726EV

Features Microchip’s 1A, Low Quiescent Current LDO

Regulator in two circuits. The first circuit has the adjustable

version of the MCP1726 in the 8-pin 3x3 DFN package. The

second circuit has the adjustable version of the MCP1726 in

the 8-pin SOIC package. Both circuits have potentiometers

that can be used to adjust the output voltage of the LDO.

Fixed voltage versions of the device can also be evaluated

with this board.

MCP1252 Charge Pump Backlight

Demo Board

Ordering Information: MCP1252DM-BKLT

The MCP1252 Charge Pump Backlight LED Demo Board

demonstrates the use of a charge pump device in an LED

application. The board also serves as a platform to evaluate

the MCP1252 device in general.

SOIC 8-Lead Evaluation Board

Ordering Information: SOIC8EV

A blank PCB to easily evaluate Microchip Technology’s 8-pin

devices. Each device pin is connected to a pull-up resistor, a

pull-down resistor, an in-line resistor and a loading capacitor.

The PCB pads allow through hole or surface mount

connectors to be installed to ease connection to the board.

Additional passive component footprints are on the board to

allow simple circuits to be implemented.

Development Systems Ordering Guide

Thermal Management

Products

TC64X/64XB Fan Speed Controller

Evaluation Board

Ordering Information: TC642EV

This is a complete evaluation board

for evaluation and prototyping

brushless DC fan control circuits

using the TC642, TC646, TC647,

TC648 and TC649 BDC fan

controllers.

TC64/64XB Fan Speed Controller

Demo Board

Ordering Information: TC642DEMO

Fan control module allows users to quickly prototype fan

control circuits based on the TC642 or TC646 PWM fan

control ICs. It uses through hole components for easy user

assembly and evaluation.

TC650 Fan Speed Controller Demo Board

Ordering Information: TC650DEMO

Allows users to quickly prototype fan

control circuits based on the TC650 or

TC651 PWM fan control ICs.

TC652 Fan Speed Controller Demo Board

Ordering Information: TC652DEMO

Allows users to quickly prototype fan

control circuits on TC652 or TC653

PWM fan control ICs. The board can

interface with virtually any brushless

DC fan.

TC1047A Temperature-to-Voltage

Converter PICtail™ Daughter Board

Ordering Information: 1047ADM-PCTL

Demonstrates how to interface the

TC1047A device to a microcontroller.

Connects directly to the PICkit 1 Flash

Starter Kit, providing a platform for code

development and evaluation. Provides a

good example of how to integrate an

analog temperature sensor into a system.

Thermal Management

Products (Cont.)

TC72 Digital Temperature Sensor PICtail™

Daughter Board

Ordering Information: TC72DM-PICTL

Connects directly to the PICkit 1 Flash

Starter Kit. Highly accurate board

features a 10-bit digital sensor with 3-wire

SPI™ interface.

TC74 Serial Digital Thermal Sensor

Demo Board

Ordering Information: TC74DEMO

Particularly suited for low-cost, small form

factor applications. Connects directly to the

PICkit 1 Flash Starter Kit.

TC77 Thermal Sensor PICtail™

Daughter Board

Ordering Information: TC77-DM-PICTL

System designers can use this design as

an example of how to integrate a digital

temperature sensor into their systems.

Connects directly to the PICkit 1 Flash

Starter Kit.

MCP9700 Thermal Sensor PICtail™

Daughter Board

Ordering Information: MCP9700DM-PCTL

The MCP9700 Thermal Sensor PICtail™ Daughter Board

demonstrates how to interface the MCP9700 to a

microcontroller. This can be used by the system designer as

an example of how to integrate an analog temperature

sensor into systems.

Analog and Mixed-Signal Demo Boards and Kits

Analog Software Tools

FilterLab® Active Filter Design Software

The FilterLab® Active Filter Design Software tool simplifies

active filter design. Available at no cost, the FilterLab Active

Filter Design Software tool provides full schematic diagrams

of the filter circuit with component values and displays the

frequency response.

SPICE Software Models

Modeling is the heart of any SPICE simulation system and

Microchip provides a variety of model libraries. This library

and service is another example of how Microchip leads the

way in analog simulation and modeling.

For more information, visit the Microchip web site at:

www.microchip.com/analogtools

Development Systems Ordering Guide

NOTES:

This section contains the following major topics:

KEELOQ® Security ICs Evaluation Kit II .....................................................................................98

KEELOQ® SECURITY ICs

EVALUATION KIT

Development Systems Ordering Guide

KEELOQ® Security ICs Evaluation Kit II

The KEELOQ Security ICs Evaluation Kit II provides the

opportunity to evaluate KEELOQ Security ICs code

hopping technology quickly and easily without having

to make a large capital investment. The evaluation kit

contains all the hardware and software necessary to

implement a fully functional remote control system and

demonstrate all operating modes of the following

devices: HCS101, HCS200, HCS201, HCS300,

HCS301, HCS320, HCS360, HCS361, HCS362,

HCS365 and HCS370 encoders.

The kit can also be used to program and demonstrate

the encoder functionality of the HCS410, HCS412 and

HCS473 transponders (transcoders).

KEELOQ® Security ICs Evaluation Kit II Contents

• Programmer and Decoder Demonstration Board

•Two K

EELOQ Security ICs Transmitter Demo

Boards

• Sample Kit Containing Various KEELOQ Security

ICs Encoder and Decoder Samples

•K

EELOQ Security ICs Data Product CD

Ordering Information:

DM303006 KEELOQ® Security ICs Evaluation Kit II

This section contains the following major topics:

PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/

Polymer Chemistries ...............................................................................................................100

PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/

Polymer Chemistries ...............................................................................................................101

BATTERY MANAGEMENT

Development Systems Ordering Guide

PowerSmart® Battery Management Evaluation Kits

for 2, 3 and 4 Series Cell Lithium Ion/Polymer

Chemistries

The PowerSmart Battery Management Evaluation Kits

for Lithium Ion/Polymer chemistries provide the

opportunity to evaluate a Microchip battery

management solution for Lithium-based battery packs.

The evaluation kits contain all of the hardware and

software necessary to implement a functional

SmartBattery pack with a primary and secondary safety

circuit and a LED State-of-Charge display. The kit can

be used to configure and demonstrate functionality of

the PS501 Battery Manager IC.

PowerSmart® Battery Management

Evaluation Kits for Lithium Ion/Polymer

Chemistries Contents

• Battery Manager Module for Lithium Ion/

Polymer Battery Packs

• PowerInfo™ 2 Configuration Interface

•USB Cable

• RS-232 Cable

• Power Supply

• Battery Management PC Software CD

Ordering Information:

PS5162EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (2-cell)

PS5163EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (3-cell)

PS5164EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (4-cell)

Battery Management

PowerSmart® Battery Management Monitor

Evaluation Kit for 1 and 2 Series Cell Lithium

Ion/Polymer Chemistries

The PowerSmart Battery Management Evaluation Kit

for Lithium Ion/Polymer chemistries provides the

opportunity to evaluate a Microchip battery monitor

solution for one or two series cell Lithium-based battery

packs. The evaluation kit contains all of the hardware

and software necessary to incorporate a functional fuel

gauge and safety module into a battery pack. The kit

can be used to configure and demonstrate functionality

of the PS700 Battery Monitor IC.

PowerSmart® Battery Management

Evaluation Kit for 1 and 2 Series Cell

Lithium Ion/Polymer Chemistries Contents

• Battery Monitor Evaluation Board (PS7070) for

1 and 2 Series Cell Lithium Ion/Polymer Battery

Packs

• PowerInfo™ 2 Configuration Interface (PS051)

•USB Cable

• Battery Management PC Software CD

Ordering Information:

PS7070EV PowerSmart® Battery Management Evaluation Kit for 1 and 2 Series Cell Lithium Ion/Polymer

Chemistries

Development Systems Ordering Guide

NOTES:

This section contains the following major topics:

Development Systems Cross Reference Table.......................................................................104

CROSS REFERENCE

Development Systems Ordering Guide

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

Analog Interface Development Tools

MCP2120 14P DM163008

MCP2150 18P DM163008

MCP250XX 14P AC164301*DV250501

MCP250XX 14SO AC164302*

MCP2510 18P DV251001

MCP2515 18P DV251001

PICmicro® Microcontroller Development Tools

PIC10F200 6OT AC164037 AC164321 AC163020 AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F200 8P AC164037 AC164301 ✓AC162059*DV164101,

DV164120*

PIC10F202 6OT AC164037 AC164321 AC163020 AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F202 8P AC164037 AC164301 ✓AC162059*DV164101,

DV164120*

PIC10F204 6OT AC164037 AC164321 AC163020 AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F204 8P AC164037 AC164301 ✓AC162059*DV164101,

DV164120*

PIC10F206 6OT AC164037 AC164321 AC163020 AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F206 8P AC164037 AC164301 ✓AC162059*DV164101

DV164120*

PIC10F220 6OT AC164037 AC164321* AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F220 8P AC164037*AC164301* AC162059* DV164101,

DV164120*

PIC10F222 6OT AC164037*AC164321* AC162059*

+XLT06SOT

DV164101 or

DV164120*

+AC163020

PIC10F222 8P AC164037*AC164301* AC162059* DV164101,

DV164120*

PIC12C508 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓DM163001, DVMCPA

PIC12C508 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC12C508A 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓DM163001, DVMCPA

PIC12C508A 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

PIC12C508A 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302

PIC12C508A 8MF PCM16XA0 DVA12XP080 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

PIC12C509 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓DM163001, DVMCPA

PIC12C509 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

PIC12C509A 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓DM163001, DVMCPA

PIC12C509A 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

PIC12C509A 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302

PIC12C509A 8MF PCM16XA0 DVA12XP080 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

PIC12C671 8P, 8JW PCM12XA0 DVA12XP081 AC124001 AC164301 ✓

PIC12C671 8SM PCM12XA0 DVA12XP081 XLT08SO AC124001 AC164312

PIC12C671 8MF PCM12XA0 DVA12XP081 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

PIC12C672 8P, 8JW PCM12XA0 DVA12XP081 AC124001 AC164301 ✓

PIC12C672 8SM PCM12XA0 DVA12XP081 XLT08SO AC124001 AC164312

PIC12C672 8MF PCM12XA0 DVA12XP081 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

PIC12CE518 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓

PIC12CE518 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

PIC12CE518 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302

PIC12CE519 8P, 8JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓

PIC12CE519 8SM PCM16XA0 DVA12XP080 XLT08SO AC124001 AC164312

PIC12CE519 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302

PIC12CE673 8P, 8JW PCM12XA0 DVA12XP081 AC124001 AC164301 ✓

PIC12CE674 8P, 8JW PCM12XA0 DVA12XP081 AC124001 AC164301 ✓

PIC12F508 8P PCM16XA0 DVA12XP080 AC124001 AC164301 ✓AC162059*

DM163014,

DV164101,

DV164120*

PIC12F508 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302 AC162059*

+XLT08SO

PIC12F508 8ST PCM16XA0 DVA12XP080 AC164306

PIC12F508 8MS PCM16XA0 DVA12XP080

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC12F509 8P PCM16XA0 DVA12XP080 AC124001 AC164301 ✓AC162059*

DM163014,

DV164101,

DV164120*

PIC12F509 8SN PCM16XA0 DVA12XP080 XLT08SO AC164026 AC164302 AC162059*

+XLT08SO

PIC12F509 8ST PCM16XA0 DVA12XP080 AC164306

PIC12F509 8MS PCM16XA0 DVA12XP080

PIC12F510 8P AC124001* AC164301* AC162070* DV164101,

DV164120*

PIC12F510 8SN AC164026* AC164302*

PIC12F510 8MS

PIC12F510 8MF AC164301*

+AC164032

PIC12F629 8P PCM12XB0 DVA12XP081 AC124001 AC164301 ✓AC162050

DM163014,

DV164101,

DV164120*

PIC12F629 8SN PCM12XB0 DVA12XP081 XLT08SO AC164026 AC164302 AC162050

+XLT08SO

PIC12F629 8MF PCM12XB0 DVA12XP081 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

AC162050

+XLT08DFN or

XLT08DFN2

PIC12F635 8P PCM16YM0 DVA1002 ACICE0201 AC124001 AC164301 ✓AC162057

DM163014,

DV164101,

DV164120*

PIC12F635 8SN PCM16YM0 DVA1002 XLT08SO AC164026 AC164302 AC162057

+XLT08SO

PIC12F635 8MF PCM16YM0 DVA1002 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

AC162050

+XLT08DFN or

XLT08DFN2

PIC12F675 8P PCM12XB0 DVA12XP081 AC124001 AC164301 ✓AC162050

DM163014,

DV164101,

DV164120*

PIC12F675 8SN PCM12XB0 DVA12XP081 XLT08SO AC164026 AC164302 AC162050

+XLT08SO

PIC12F675 8MF PCM12XB0 DVA12XP081 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

AC162050

+XLT08DFN or

XLT08DFN2

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC12F683 8P PCM12XC0 DVA1002 ACICE0201 AC124001 AC164301 ✓AC162058

DM163014,

DV164101,

DV164120*

PIC12F683 8SN PCM12XC0 DVA1002 XLT08SO AC164026 AC164302 AC162058

+XLT08SO

PIC12F683 8MF PCM12XC0 DVA1002 XLT08DFN or

XLT08DFN2

AC124001

+AC164032

AC164301

+AC164032 AC164032

AC162058

+XLT08DFN or

XLT08DFN2

PIC14000 28SP, 28JW PCM14XA0 DVA14XP280 AC144001 ✓

PIC14000 28SO PCM14XA0 DVA14XP280 XLT28SO AC144002

PIC14000 28SS PCM14XA0 DVA14XP280 XLT28SS AC144002

PIC16C52 18P PCM16XA0 DVA16XP180 AC164001 AC164301 ✓DM163001

PIC16C52 18SO PCM16XA0 DVA16XP180 XLT18SO AC164002 AC164302

PIC16C54/54A/

54C 18P, 18JW PCM16XA0 DVA16XP180 AC164001 AC164301 ✓DM163001

PIC16C54/54A/

54C 18SO PCM16XA0 DVA16XP180 XLT18SO AC164002 AC164302

PIC16C54/54A/

54C 20SS PCM16XA0 DVA16XP180 XLT20SS AC164015 AC164307

PIC16C55/55A 28P, 28JW PCM16XA0 DVA16XP280 XLT28XP AC164001 AC164301 ✓DM163001

PIC16C55/55A 28SP PCM16XA0 DVA16XP280 AC164001 AC164301 ✓DM163001

PIC16C55/55A 28SO PCM16XA0 DVA16XP280 XLT28SO AC164002 AC164302

PIC16C55/55A 28SS PCM16XA0 DVA16XP280 XLT28SS2 AC164015 AC164307

PIC16C56/56A 18P, 18JW PCM16XA0 DVA16XP180 AC164001 AC164301 ✓DM163001

PIC16C56/56A 18SO PCM16XA0 DVA16XP180 XLT18SO AC164002 AC164302

PIC16C56/56A 20SS PCM16XA0 DVA16XP180 XLT20SS AC164015 AC164307

PIC16C57/57C 28P, 28JW PCM16XA0 DVA16XP280 XLT28XP AC164001 AC164301 ✓DM163001

PIC16C57/57C 28SP PCM16XA0 DVA16XP280 AC164001 AC164301 ✓DM163001

PIC16C57/57C 28SO PCM16XA0 DVA16XP280 XLT28SO AC164002 AC164302

PIC16C57/57C 28SS PCM16XA0 DVA16XP280 XLT28SS2 AC164015 AC164307

PIC16C58A/58B 18P, 18JW PCM16XA0 DVA16XP180 AC164001 AC164301 ✓DM163001

PIC16C58A/58B 18SO PCM16XA0 DVA16XP180 XLT18SO AC164002 AC164302

PIC16C58A/58B 20SS PCM16XA0 DVA16XP180 XLT20SS AC164015 AC164307

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16C62A 28P, 28JW PCM16XB1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C62A 28SO PCM16XB1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C62A 28SS PCM16XB1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C62B 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C62B 28ML PCM16XE1 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031

PIC16C62B 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C62B 28SS PCM16XE1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C63 28SP, 28JW PCM16XB1 DVA16XP282 AC164012 AC164301 ✓DM163022,

DVMCPA

PIC16C63 28SO PCM16XB1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C63A 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C63A 28ML PCM16XE1 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031

PIC16C63A 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C63A 28SS PCM16XE1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C64A 40P, 40JW PCM16XB1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C64A 44L PCM16XB1 DVA16XL441 AC164013 AC164309

PIC16C64A 44PQ PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C64A 44PT PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C65A 40P, 40JW PCM16XB1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C65A 44L PCM16XB1 DVA16XL441 AC164013 AC164309

PIC16C65A 44PQ PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C65A 44PT PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C65B 40P, 40JW PCM16XE1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C65B 44L PCM16XE1 DVA16XL441 AC164013 AC164309

PIC16C65B 44PQ PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C65B 44PT PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16C66 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C66 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C67 40P, 40JW PCM16XE1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C67 44L PCM16XE1 DVA16XL441 AC164013 AC164309

PIC16C67 44PQ PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C67 44PT PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C71 18P, 18JW PCM16XF0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C71 18SO PCM16XF0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C72 28SP, 28JW PCM16XB1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C72 28SO PCM16XB1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C72 28SS PCM16XB1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C72A 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C72A 28ML PCM16XE1 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031

PIC16C72A 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C72A 28SS PCM16XE1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C73A 28SP, 28JW PCM16XB1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C73A 28SO PCM16XB1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C73B 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C73B 28ML PCM16XE1 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031

PIC16C73B 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C73B 28SS PCM16XE1 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C74A 40P, 40JW PCM16XB1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C74A 44L PCM16XB1 DVA16XL441 AC164013 AC164309

PIC16C74A 44PQ PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C74A 44PT PCM16XB1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16C74B 40P, 40JW PCM16XE1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C74B 44L PCM16XE1 DVA16XL441 AC164013 AC164309

PIC16C74B 44PQ PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C74B 44PT PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C76 28SP, 28JW PCM16XE1 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C76 28SO PCM16XE1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C77 40P, 40JW PCM16XE1 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C77 44L PCM16XE1 DVA16XL441 AC164013 AC164309

PIC16C77 44PQ PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C77 44PT PCM16XE1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C432 20P, 20JW PCM16YB0 DVA16XP201 AC164029 AC164301 DM163005

PIC16C432 20SS PCM16YB0 DVA16XP201 XLT20SS1 AC164029 AC164307 DM163007, DM163011

PIC16C433 18P, 18JW PCM16YC0 DVA16XP185 AC164030 AC164301 DM163005

PIC16C433 18SO PCM16YC0 DVA16XP185 XLT18SO AC164030 AC164307

PIC16C505 14P, 14JW PCM16XA0 DVA16XP140 AC124001 AC164301 ✓

PIC16C505 14SL PCM16XA0 DVA16XP140 XLT14SO AC164026 AC164302

PIC16C554 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C554 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C554 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C557 28P AC164001 AC164301

PIC16C557 28SO AC164002 AC164302

PIC16C558 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C558 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C558 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C620/

620A 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C620/

620A 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C620/

620A 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16C621/

621A 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C621/

621A 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C621/

621A 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C622/

622A 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C622/

622A 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C622/

622A 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C642 28SP, 28JW PCM16XD0 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C642 28SO PCM16XD0 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C662 40P, 40JW PCM16XD0 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C662 44L PCM16XD0 DVA16XL441 AC164013 AC164309

PIC16C662 44PQ PCM16XD0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C662 44PT PCM16XD0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C710 18P, 18JW PCM16XF0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C710 18SO PCM16XF0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C710 20SS PCM16XF0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C711 18P, 18JW PCM16XF0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C711 18SO PCM16XF0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C711 20SS PCM16XF0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C712 18P, 18JW PCM16XE1 DVA16XP182 AC164010 AC164301 ✓DM163001

PIC16C712 18SO PCM16XE1 DVA16XP182 XLT18SO AC164010 AC164302

PIC16C712 20SS PCM16XE1 DVA16XP182 XLT20SS AC164018 AC164307

PIC16C715 18P, 18JW PCM16XG0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16C715 18SO PCM16XG0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16C715 20SS PCM16XG0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16C716 18P, 18JW PCM16XE1 DVA16XP182 AC164010 AC164301 ✓DM163001

PIC16C716 18SO PCM16XE1 DVA16XP182 XLT18SO AC164010 AC164302

PIC16C716 20SS PCM16XE1 DVA16XP182 XLT20SS AC164018 AC164307

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16C717 18P, 18JW PCM16XN1 DVA18XP180 AC164010 AC164301 ✓DM163001

PIC16C717 18SO PCM16XN1 DVA18XP180 XLT18SO AC164010 AC164302

PIC16C717 20SS PCM16XN1 DVA18XP180 XLT20SS AC164018 AC164307

PIC16C745 28SP, 28JW PCM16XQ1 DVA16XP282 AC164012 AC164301 ✓DM163010

PIC16C745 28SO PCM16XQ1 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C765 40P, 40JW PCM16XQ1 DVA16XP401 AC164012 AC164301 ✓DM163010

PIC16C765 44L PCM16XQ1 DVA16XL441 AC164013 AC164309

PIC16C765 44PT PCM16XQ1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C770 20P, 20JW PCM16XN1 DVA16XP200 AC164028 AC164301 ✓DM163001

PIC16C770 20SO PCM16XN1 DVA16XP200 XLT20SO1 AC164028 AC164302

PIC16C770 20SS PCM16XN1 DVA16XP200 XLT20SS1 AC164018 AC164307

PIC16C771 20P, 20JW PCM16XN1 DVA16XP200 AC164028 AC164301 ✓DM163001

PIC16C771 20SO PCM16XN1 DVA16XP200 XLT20SO1 AC164028 AC164302

PIC16C771 20SS PCM16XN1 DVA16XP200 XLT20SS1 AC164018 AC164307

PIC16C773 28SP, 28JW PCM16XL0 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16C773 28SO PCM16XL0 DVA16XP282 XLT28SO AC164017 AC164302

PIC16C773 28SS PCM16XL0 DVA16XP282 XLT28SS AC164021 AC164307

PIC16C774 40P, 40JW PCM16XL0 DVA16XP401 AC164012 AC164301 ✓DM163022

PIC16C774 44L PCM16XL0 DVA16XL441 AC164013 AC164309

PIC16C774 44PQ PCM16XL0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311

PIC16C774 44PT PCM16XL0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305

PIC16C781 20P, 20JW PCM16XW0 DVA16XP202 AC164028 AC164301 ✓DM163012

PIC16C781 20SO PCM16XW0 DVA16XP202 XLT20SO1 AC164028 AC164302

PIC16C781 20SS PCM16XW0 DVA16XP202 XLT20SS1 AC164018 AC164307

PIC16C782 20P, 20JW PCM16XW0 DVA16XP202 AC164028 AC164301 ✓DM163012

PIC16C782 20SO PCM16XW0 DVA16XP202 XLT20SO1 AC164028 AC164302

PIC16C782 20SS PCM16XW0 DVA16XP202 XLT20SS1 AC164018 AC164307

PIC16C923 64SP PCM16XJ0 DVA16XP640 AC164025

PIC16C923 64PT PCM16XJ0 DVA16PQ640 XLT64PT1 AC164023 AC164319

PIC16C923 68L, 68CL PCM16XJ0 DVA16XL680 AC164022 AC164308 AC164024 DM163003

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16C924 64SP PCM16XJ0 DVA16XP640 AC164025

PIC16C924 64PT PCM16XJ0 DVA16PQ640 XLT64PT1 AC164023 AC164319

PIC16C924 68L, 68CL PCM16XJ0 DVA16XL680 AC164022 AC164308 AC164024 DM163003

PIC16C925 64PT PCM16XT0 DVA16PQ640 XLT64PT1 AC164023 AC164319

PIC16C925 68L, 68CL PCM16XT0 DVA16XL680 AC164022 AC164308 AC164024 DM163003

PIC16C926 64PT PCM16XT0 DVA16PQ640 XLT64PT1 AC164023 AC164319

PIC16C926 68L, 68CL PCM16XT0 DVA16XL680 AC164022 AC164308 AC164024 DM163003

PIC16CE623 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16CE623 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16CE623 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16CE624 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16CE624 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16CE624 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16CE625 18P, 18JW PCM16XC0 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16CE625 18SO PCM16XC0 DVA16XP180 XLT18SO AC164010 AC164302

PIC16CE625 20SS PCM16XC0 DVA16XP180 XLT20SS AC164018 AC164307

PIC16F54 18P PCM16XA0 DVA16XP180 AC164001 AC164301 ✓DV164101,

DM163001,

DV164120*

PIC16F54 18SO PCM16XA0 DVA16XP180 XLT18SO AC164002 AC164302

PIC16F54 20SS PCM16XA0 DVA16XP180 XLT20SS AC164015 AC164307

PIC16F57 28P PCM16XA0 DVA16XP280 XLT28XP AC164001 AC164301

PIC16F57 28SP PCM16XA0 DVA16XP280 AC164001 AC164301 ✓DV164101,

DM163001,

DV164120*

PIC16F57 28SO PCM16XA0 DVA16XP280 XLT28SO AC164002 AC164302

PIC16F57 28SS PCM16XA0 DVA16XP280 XLT28SS2 AC164015 AC164307

PIC16F59 40P AC164038* AC164301 ✓*DV164101,

DV164120*

PIC16F59 44PT AC164020* AC164305 ✓*

PIC16F72 28SP, 28JW PCM16XS2 DVA16XP282 AC164012 AC164301 ✓DM163022

PIC16F72 28SO PCM16XS2 DVA16XP282 XLT28SO AC164017 AC164302

PIC16F72 28SS PCM16XS2 DVA16XP282 XLT28SS AC164021 AC164307

PIC16F72 28ML PCM16XS2 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16F73 28SP, 28JW PCM16XS2 DVA16XP282 AC164012 AC164301 ✓✓*DM163022

PIC16F73 28ML PCM16XS2 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓*

PIC16F73 28SO PCM16XS2 DVA16XP282 XLT28SO AC164017 AC164302 ✓*

PIC16F73 28SS PCM16XS2 DVA16XP282 XLT28SS AC164021 AC164307 ✓*

PIC16F74 40P PCM16XS2 DVA16XP401 AC164012 AC164301 ✓ ✓*DM163022

PIC16F74 44L PCM16XS2 DVA16XL441 AC164013 AC164309 ✓*

PIC16F74 44PT PCM16XS2 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓*

PIC16F74 44ML PCM16XS2 DVA16XL441 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓*

PIC16F76 28SP, 28JW PCM16XS2 DVA16XP282 AC164012 AC164301 ✓✓*DM163022

PIC16F76 28ML PCM16XS2 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓*

PIC16F76 28SO PCM16XS2 DVA16XP282 XLT28SO AC164017 AC164302 ✓*

PIC16F76 28SS PCM16XS2 DVA16XP282 XLT28SS AC164021 AC164307 ✓*

PIC16F77 40P, 40JW PCM16XS2 DVA16XP401 AC164012 AC164301 ✓ ✓*DM163022

PIC16F77 44L PCM16XS2 DVA16XL441 AC164013 AC164309 ✓*

PIC16F77 44ML PCM16XS2 DVA16XL441 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓*

PIC16F77 44PT PCM16XS2 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓*

PIC16F83 18P PCM16XH1 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16F83 18SO PCM16XH1 DVA16XP180 XLT18SO AC164010 AC164302

PIC16F84 18P PCM16XH1 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16F84 18SO PCM16XH1 DVA16XP180 XLT18SO AC164010 AC164302

PIC16F84A 18P PCM16XH1 DVA16XP180 AC164010 AC164301 ✓DM163001

PIC16F84A 18SO PCM16XH1 DVA16XP180 XLT18SO AC164010 AC164302

PIC16F84A 20SS PCM16XH1 DVA16XP180 XLT20SS AC164018 AC164307

PIC16F87 18P PCM16YG0 DVA16XP186 AC164010 AC164301 ✓ ✓ DM163014

PIC16F87 18SO PCM16YG0 DVA16XP186 XLT18SO AC164010 AC164302 ✓

PIC16F87 20SS PCM16YG0 DVA16XP186 XLT20SS AC164018 AC164307 ✓

PIC16F87 28ML PCM16YG0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 ✓

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16F88 18P PCM16YG0 DVA16XP186 AC164010 AC164301 ✓✓ DM163014

PIC16F88 18SO PCM16YG0 DVA16XP186 XLT18SO AC164010 AC164302 ✓

PIC16F88 20SS PCM16YG0 DVA16XP186 XLT20SS AC164018 AC164307 ✓

PIC16F88 28ML PCM16YG0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 ✓

PIC16F505 14P, 14JW PCM16XA0 DVA16XP140 AC124001 AC164301 ✓AC162059

DM163014,

DV164101,

DV164120*

PIC16F505 14SL PCM16XA0 DVA16XP140 XLT14SO AC164026 AC164302 AC162059

+XLT14SO

PIC16F505 14ST PCM16XA0 DVA16XP140 AC164306

PIC16F506 14P AC124001* AC164301* AC162070* DV164101*,

DV164120*

PIC16F506 14SO AC164026* AC164302*

PIC16F506 14ST AC164306*

PIC16F506 16ML

PIC16F627 18P, 18JW PCM16XP0 DVA16XP183 AC164010 AC164301 ✓DM163001

PIC16F627 18SO PCM16XP0 DVA16XP183 XLT18SO AC164010 AC164302

PIC16F627 20SS PCM16XP0 DVA16XP183 XLT20SS AC164018 AC164307

PIC16F627A 18P PCM16YF0 DVA16XP186 AC164010 AC164301 ✓AC162053 DM163014

PIC16F627A 18SO PCM16YF0 DVA16XP186 XLT18SO AC164010 AC164302 AC162053

+XLT18SO

PIC16F627A 20SS PCM16YF0 DVA16XP186 XLT20SS AC164018 AC164307 AC162053

+XLT20SS

PIC16F627A 28ML PCM16YF0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 AC162053

+XLT28QFN3

PIC16F628 18P, 18JW PCM16XP0 DVA16XP183 AC164010 AC164301 ✓DM163001

PIC16F628 18SO PCM16XP0 DVA16XP183 XLT18SO AC164010 AC164302

PIC16F628 20SS PCM16XP0 DVA16XP183 XLT20SS AC164018 AC164307

PIC16F628A 18P PCM16YF0 DVA16XP186 AC164010 AC164301 ✓AC162053 DM163014

PIC16F628A 18SO PCM16YF0 DVA16XP186 XLT18SO AC164010 AC164302 AC162053

+XLT18SO

PIC16F628A 20SS PCM16YF0 DVA16XP186 XLT20SS AC164018 AC164307 AC162053

+XLT20SS

PIC16F628A 28ML PCM16YF0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 AC162053

+XLT28QFN3

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16F630 14P PCM16YD0 DVA16XP141 AC124001 AC164301 ✓AC162052

DM163014,

DV164101,

DV164120*

PIC16F630 14SL PCM16YD0 DVA16XP141 XLT14SO AC164026 AC164302 AC162052

+XLT14SO

PIC16F630 14ST PCM16YD0 DVA16XP141 XLT14SS AC164026 AC164306 AC162052

+XLT14SS

PIC16F636 14P PCM16YM0 DVA1002 ACICE0207 AC124001 AC164301 ✓AC162057 DV164120*

PIC16F636 14SL PCM16YM0 DVA1002 XLT14SO AC164026 AC164302 AC162057

+XLT14SO

PIC16F636 14ST PCM16YM0 DVA1002 XLT14SS AC164026 AC164306 AC162057

+XLT14SS

PIC16F639 20P PCM16YM0*DVA1002 ACICE0203 AC164039* AC164301 ✓*AC162066*DV164101*,

DM163014

PIC16F639 20SO PCM16YM0*DVA1002 XLT20SO1 AC164039* AC164302 AC162066*

+XLT20SO1

PIC16F639 20SS PCM16YM0*DVA1002 XLT20SS1 AC164307 AC162066*

+XLT20SS1

PIC16F648A 18P PCM16YF0 DVA16XP186 AC164010 AC164301 ✓AC162053 DM163014

PIC16F648A 18SO PCM16YF0 DVA16XP186 XLT18SO AC164010 AC164302 AC162053

+XLT18SO

PIC16F648A 20SS PCM16YF0 DVA16XP186 XLT20SS AC164018 AC164307 AC162053

+XLT20SS

PIC16F648A 28ML PCM16YF0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 AC162053

+XLT28QFN3

PIC16F676 14P PCM16YD0 DVA16XP141 AC124001 AC164301 ✓AC162052

DM163014,

DV164101,

DV164120*

PIC16F676 14SL PCM16YD0 DVA16XP141 XLT14SO AC164026 AC164302 AC162052

+XLT14SO

PIC16F676 14ST PCM16YD0 DVA16XP141 XLT14SS AC164026 AC164306 AC162052

+XLT14SS

PIC16F684 14P PCM16YK0 DVA1002 ACICE0207 AC124001 AC164301 ✓AC162055 DV164101,

DV164120*

PIC16F684 14SL PCM16YK0 DVA1002 XLT14SO AC164026 AC164302 AC162055

+XLT14SO

PIC16F684 14ST PCM16YK0 DVA1002 XLT14SS AC164026 AC164306 AC162055

+XLT14SS

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16F685 20P PCM16YQ0* DVA1004* ACICE0203 AC164039* AC164301* AC162061* DV164120*

PIC16F685 20SO PCM16YQ0* DVA1004* XLT20SO1 AC164039* AC164302* AC162061*

+XLT20SO1

PIC16F685 20SS PCM16YQ0* DVA1004* XLT20SS1 AC164307* AC162061*

+XLT20SS1

PIC16F687 20P PCM16YQ0* DVA1004* ACICE0203 AC164039* AC164301* AC162061* DV164120*

PIC16F687 20SO PCM16YQ0* DVA1004* XLT20SO1 AC164039* AC164302* AC162061*

+XLT20SO1

PIC16F687 20SS PCM16YQ0* DVA1004* XLT20SS1 AC164307* AC162061*

+XLT20SS1

PIC16F688 14P PCM16YL0 DVA1002 ACICE0207 AC124001 AC164301 ✓AC162056 DV164101,

DV164120*

PIC16F688 14SL PCM16YL0 DVA1002 XLT14SO AC164026 AC164302 AC162056

+XLT14SO

PIC16F688 14ST PCM16YL0 DVA1002 XLT14SS AC164026 AC164306 AC162056

+XLT14SS

PIC16F689 20P PCM16YQ0* DVA1004* ACICE0203 AC164039* AC164301* AC162061* DV164120*

PIC16F689 20SO PCM16YQ0* DVA1004* XLT20SO1 AC164039* AC164302* AC162061*

+XLT20SO1

PIC16F689 20SS PCM16YQ0* DVA1004* XLT20SS1 AC164307* AC162061*

+XLT20SS1

PIC16F690 20P PCM16YQ0* DVA1004* ACICE0203 AC164039* AC164301* AC162061* DV164120*

PIC16F690 20SO PCM16YQ0* DVA1004* XLT20SO1 AC164039* AC164302* AC162061*

+XLT20SO1

PIC16F690 20SS PCM16YQ0* DVA1004* XLT20SS1 AC164307* AC162061*

+XLT20SS1

PIC16F716 18P PCM16YJ0 DVA16XP187 AC164010 AC164301 ✓AC162054 DM163001

PIC16F716 18SO PCM16YJ0 DVA16XP187 XLT18SO AC164010 AC164302 AC162054

+XLT18SO

PIC16F716 20SS PCM16YJ0 DVA16XP187 XLT20SS AC164018 AC164307 AC162054

+XLT20SS

PIC16F737 28SP PCM16YH0 DVA18XP280 AC164012 AC164301 ✓ ✓

PIC16F737 28SO PCM16YH0 DVA18XP280 XLT28SO AC164017 AC164302 ✓

PIC16F737 28SS PCM16YH0 DVA18XP280 XLT28SS AC164021 AC164307 ✓

PIC16F737 28ML PCM16YH0 DVA18XP280 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16F747 40P PCM16YH0 DVA18XP400 AC164012 AC164301 ✓✓

PIC16F747 44PT PCM16YH0 DVA18PQ440 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F747 44ML PCM16YH0 DVA18XP400 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓

PIC16F767 28P PCM16YH0 DVA18XP280 AC164012 AC164301 ✓ ✓

PIC16F767 28SO PCM16YH0 DVA18XP280 XLT28SO AC164017 AC164302 ✓

PIC16F767 28SS PCM16YH0 DVA18XP280 XLT28SS AC164021 AC164307 ✓

PIC16F767 28ML PCM16YH0 DVA18XP280 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓

PIC16F777 40P PCM16YH0 DVA18XP400 AC164012 AC164301 ✓✓

PIC16F777 44PT PCM16YH0 DVA18PQ440 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F777 44ML PCM16YH0 DVA18XP400 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓

PIC16F785 20P PCM16YN0*DVA1004*ACICE0203 AC164039* AC164301 ✓*AC162060*DV164120*

PIC16F785 20SO PCM16YN0*DVA1004*XLT20SO1 AC164039* AC164302 AC162060*

+XLT20SO1

PIC16F785 20SS PCM16YN0*DVA1004*XLT20SS1 AC164307 AC162060*

+XLT20SS1

PIC16F818 18P PCM16YE0 DVA16XP186 AC164010 AC164301 ✓✓ DM163014

PIC16F818 18SO PCM16YE0 DVA16XP186 XLT18SO AC164010 AC164302 ✓

PIC16F818 20SS PCM16YE0 DVA16XP186 XLT20SS AC164018 AC164307 ✓

PIC16F818 28ML PCM16YE0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 ✓

PIC16F819 18P PCM16YE0 DVA16XP186 AC164010 AC164301 ✓ ✓ DM163014

PIC16F819 18SO PCM16YE0 DVA16XP186 XLT18SO AC164010 AC164302 ✓

PIC16F819 20SS PCM16YE0 DVA16XP186 XLT20SS AC164018 AC164307 ✓

PIC16F819 28ML PCM16YE0 DVA16XP186 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033 ✓

PIC16F870 28SP, 28JW PCM16XR1 DVA16XP282 AC164012 AC164301 ✓✓ DM163022

PIC16F870 28SO PCM16XR1 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F870 28SS PCM16XR1 DVA16XP282 XLT28SS AC164021 AC164307 ✓

PIC16F871 40P PCM16XR1 DVA16XP401 AC164012 AC164301 ✓ ✓ DM163022

PIC16F871 44L PCM16XR1 DVA16XL441 AC164013 AC164309 ✓

PIC16F871 44PT PCM16XR1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC16F872 28SP PCM16XK1 DVA16XP282 AC164012 AC164301 ✓✓ DM163022

PIC16F872 28SO PCM16XK1 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F872 28SS PCM16XK1 DVA16XP282 XLT28SS AC164021 AC164307 ✓

PIC16F873 28SP PCM16XK1 DVA16XP282 AC164012 AC164301 ✓ ✓ DM163022

PIC16F873 28SO PCM16XK1 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F873A 28SP PCM16XV0 DVA16XP282 AC164012 AC164301 ✓✓ DM163022

PIC16F873A 28SO PCM16XV0 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F873A 28SS PCM16XV0 DVA16XP282 XLT28SS AC164021 AC164307 ✓

PIC16F873A 28ML PCM16XV0 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓

PIC16F874 40P PCM16XK1 DVA16XP401 AC164012 AC164301 ✓ ✓ DM163022

PIC16F874 44L PCM16XK1 DVA16XL441 AC164013 AC164309 ✓

PIC16F874 44PQ PCM16XK1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311 ✓

PIC16F874 44PT PCM16XK1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F874A 40P PCM16XV0 DVA16XP401 AC164012 AC164301 ✓✓ DM163022

PIC16F874A 44L PCM16XV0 DVA16XL441 AC164013 AC164309 ✓

PIC16F874A 44PT PCM16XV0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F874A 44ML PCM16XV0 DVA16XP401 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓

PIC16F876 28SP PCM16XK1 DVA16XP282 AC164012 AC164301 ✓ ✓ DM163022

PIC16F876 28SO PCM16XK1 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F876A 28SP PCM16XV0 DVA16XP282 AC164012 AC164301 ✓✓ DM163022

PIC16F876A 28SO PCM16XV0 DVA16XP282 XLT28SO AC164017 AC164302 ✓

PIC16F876A 28SS PCM16XV0 DVA16XP282 XLT28SS AC164021 AC164307 ✓

PIC16F876A 28ML PCM16XV0 DVA16XP282 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031 ✓

PIC16F877 40P PCM16XK1 DVA16XP401 AC164012 AC164301 ✓ ✓ DM163022

PIC16F877 44L PCM16XK1 DVA16XL441 AC164013 AC164309 ✓

PIC16F877 44PQ PCM16XK1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164014 AC164311 ✓

PIC16F877 44PT PCM16XK1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC16F877A 40P PCM16XV0 DVA16XP401 AC164012 AC164301 ✓✓ DM163022

PIC16F877A 44L PCM16XV0 DVA16XL441 AC164013 AC164309 ✓

PIC16F877A 44PT PCM16XV0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F877A 44ML PCM16XV0 DVA16XP401 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓

PIC16F913 28P PCM16YP0*DVA18XP280 AC164012 AC164301 ✓*✓*DV164120*

PIC16F913 28SO PCM16YP0*DVA18XP280 XLT28SO AC164017 AC164302 ✓*

PIC16F913 28SS PCM16YP0*DVA18XP280 XLT28SS AC164021 AC164307 ✓*

PIC16F913 28ML PCM16YP0*DVA18XP280 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031*✓*

PIC16F914 40P PCM16YP0*DVA18XP400 AC164012 AC164301 ✓*✓*DV164120*

PIC16F914 44PT PCM16YP0*DVA18PQ440 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓*

PIC16F914 44ML PCM16YP0*DVA18XP400 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034*✓*

PIC16F916 28P PCM16YP0*DVA18XP280 AC164012 AC164301 ✓*✓DV164120*

PIC16F916 28SO PCM16YP0*DVA18XP280 XLT28SO AC164017 AC164302 ✓

PIC16F916 28SS PCM16YP0*DVA18XP280 XLT28SS AC164021 AC164307 ✓

PIC16F916 28ML PCM16YP0*DVA18XP280 XLT28QFN4*AC164012

+AC164031

AC164301

+AC164031 AC164031* ✓

PIC16F917 40P PCM16YP0*DVA18XP400 AC164012 AC164301 ✓*✓DV164120*

PIC16F917 44PT PCM16YP0*DVA18PQ440 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓

PIC16F917 44ML PCM16YP0*DVA18XP400 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034* ✓

PIC16HV540 18P, 18JW AC164001 AC164301 ✓

PIC16HV540 18SO AC164002 AC164302

PIC16HV540 20SS AC164015 AC164307

PIC17C42A 40P, 40JW PCM17XA0 DVA17XP401 AC174001 AC164301 ✓DM163001

PIC17C42A 44L PCM17XA0 DVA17XL441 AC174002 AC164317

PIC17C42A 44PQ PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174004 AC164316

PIC17C42A 44PT PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174005 AC164315

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC17C43 40P, 40JW PCM17XA0 DVA17XP401 AC174001 AC164301 ✓DM163001

PIC17C43 44L PCM17XA0 DVA17XL441 AC174002 AC164317

PIC17C43 44PQ PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174004 AC164316

PIC17C43 44PT PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174005 AC164315

PIC17C44 40P, 40JW PCM17XA0 DVA17XP401 AC174001 AC164301 ✓DM163001

PIC17C44 44L PCM17XA0 DVA17XL441 AC174002 AC164317

PIC17C44 44PQ PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174004 AC164316

PIC17C44 44PT PCM17XA0 DVA17PQ441 XLT44PT or

XLT44PT3 AC174005 AC164315

PIC17C752 68L PCM17XA0 DVA17XL681 AC174007 AC164308*AC164024 DM173001

PIC17C752 64PT PCM17XA0 DVA17PQ641 XLT64PT2 or

XLT64PT5 AC174008 AC164319*

PIC17C756/

756A 68L, 68CL PCM17XA0 DVA17XL681 AC174007 AC164308*AC164024 DM173001

PIC17C756/

756A 64PT PCM17XA0 DVA17PQ641 XLT64PT2 or

XLT64PT5 AC174008 AC164319*

PIC17C762 84L PCM17XA0 DVA17XL841 AC174012 AC164318 AC164027 DM173001

PIC17C762 80PT PCM17XA0 DVA17PQ801 XLT80PT or

XLT80PT3 AC174011 AC164320

PIC17C766 84L, 84CL PCM17XA0 DVA17XL841 AC174012 AC164318 AC164027 DM173001

PIC17C766 80PT PCM17XA0 DVA17PQ801 XLT80PT or

XLT80PT3 AC174011 AC164320

PIC18C242 28SP, 28JW PCM18XA0 DVA16XP282 AC164012 AC164301 ✓SW006011 DM163022

PIC18C242 28SO PCM18XA0 DVA16XP282 XLT28SO AC164017 AC164302 SW006011

PIC18C252 28SP PCM18XA0 DVA16XP282 AC164012 AC164301 ✓SW006011 DM163022

PIC18C252 28JW PCM18XA0 DVA16XP282 XLT28XP AC164012 AC164301 SW006011 DM163022

PIC18C252 28SO PCM18XA0 DVA16XP282 XLT28SO AC164017 AC164302 SW006011

PIC18C442 40P, 40JW PCM18XA0 DVA16XP401 AC164012 AC164301 ✓SW006011 DM163022

PIC18C442 44L PCM18XA0 DVA16XL441 AC164013 AC164309 SW006011

PIC18C442 44PT PCM18XA0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC18C452 40P, 40JW PCM18XA0 DVA16XP401 AC164012 AC164301 ✓SW006011 DM163022

PIC18C452 44L PCM18XA0 DVA16XL441 AC164013 AC164309 SW006011

PIC18C452 44PT PCM18XA0 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 SW006011

PIC18C601 68L PMF18WB1 DAF18-1 XLT68L1 AC174007 AC164308 ✓SW006011 DM163006

PIC18C601 64PT PMF18WB1 DAF18-1 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011

PIC18C658 68L PCM18XB0 DVA18XL680 AC174007 AC164308 ✓(7) SW006011 DM163007

PIC18C658 64PT PCM18XB0 DVA18PQ640 XLT64PT2 or

XLT64PT5 AC174008 AC164303 SW006011

PIC18C801 80PT PMF18WB1 DAF18-1 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011

PIC18C801 84L PMF18WB1 DAF18-1 XLT84L1 AC174012 AC164310 ✓SW006011 DM163006

PIC18C858 84L PCM18XB0 DVA18XL840 AC174012 AC164310 ✓(7) SW006011 DM163007

PIC18C858 80PT PCM18XB0 DVA18PQ800 XLT80PT or

XLT80PT3 AC174011 AC164304 SW006011

PIC18F242 28SP PCM18XH2 DVA16XP282 or

DVA18XP280 PMF18WC1 DAF18-2 ACICE0204 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F242 28SO PCM18XH2 DVA16XP282 or

DVA18XP280 XLT28SO PMF18WC1 DAF18-2 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F248 28SP PCM18XD1 DVA16XP282 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F248 28SO PCM18XD1 DVA16XP282 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F252 28SP PCM18XH2 DVA16XP282 or

DVA18XP280 PMF18WC1 DAF18-2 ACICE0204 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F252 28SO PCM18XH2 DVA16XP282 or

DVA18XP280 XLT28SO PMF18WC1 DAF18-2 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F258 28SP PCM18XD1 DVA16XP282 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F258 28SO PCM18XD1 DVA16XP282 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F442 40P PCM18XH2 DVA16XP401 or

DVA18XP400 PMF18WC1 DAF18-2 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F442 44L PCM18XH2 DVA16XL441 PMF18WC1 DAF18-3 XLT44L2 AC164013 AC164309 ✓SW006011

PIC18F442 44PT PCM18XH2 DVA16PQ441 or

DVA18PQ440

XLT44PT or

XLT44PT3 PMF18WC1 DAF18-3 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC18F448 40P PCM18XD1 DVA16XP401 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F448 44L PCM18XD1 DVA16XL441 AC164013 AC164309 ✓SW006011

PIC18F448 44PT PCM18XD1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F452 40P PCM18XH2 DVA16XP401 PMF18WC1 DAF18-2 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F452 44L PCM18XH2 DVA16XL441 PMF18WC1 DAF18-3 XLT44L2 AC164013 AC164309 ✓SW006011

PIC18F452 44PT PCM18XH2 DVA16PQ441 XLT44PT or

XLT44PT3 PMF18WC1 DAF18-3 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F458 40P PCM18XD1 DVA16XP401 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F458 44L PCM18XD1 DVA16XL441 AC164013 AC164309 ✓SW006011

PIC18F458 44PT PCM18XD1 DVA16PQ441 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F1220 18P PCM18XJ0 DVA18XP180 PMF18WD0 DAF18-2 ACICE0202 AC164010 AC164301 ✓*✓SW006011 DM163014

PIC18F1220 18SO PCM18XJ0 DVA18XP180 XLT18SO PMF18WD0 DAF18-2 XLT18SO AC164010 AC164302 ✓SW006011

PIC18F1220 20SS PCM18XJ0 DVA18XP180 XLT20SS PMF18WD0 DAF18-2 XLT20SS AC164018 AC164307 ✓SW006011

PIC18F1220 28ML PCM18XJ0 DVA18XP180 XLT28QFN3 PMF18WD0 DAF18-2 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033*✓SW006011

PIC18F1320 18P PCM18XJ0 DVA18XP180 PMF18WD0 DAF18-2 ACICE0202 AC164010 AC164301 ✓*✓SW006011 DM163014

PIC18F1320 18SO PCM18XJ0 DVA18XP180 XLT18SO PMF18WD0 DAF18-2 XLT18SO AC164010 AC164302 ✓SW006011

PIC18F1320 20SS PCM18XJ0 DVA18XP180 XLT20SS PMF18WD0 DAF18-2 XLT20SS AC164018 AC164307 ✓SW006011

PIC18F1320 28ML PCM18XJ0 DVA18XP180 XLT28QFN3 PMF18WD0 DAF18-2 XLT28QFN3 AC164010

+AC164033

AC164301

+AC164031 AC164033*✓SW006011

PIC18F2220 28SP PCM18XH2 DVA18XP280 PMF18WC1 DAF18-2 ACICE0204 AC164012 AC164301 ✓*✓SW006011

PIC18F2220 28SO PCM18XH2 DVA18XP280 XLT28SO PMF18WC1 DAF18-2 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2221 28SP PCM18XN0* DVA18XP280 PMF18WH0* DAF18-4 ACICE0204 AC164012* AC164301* ✓*SW006011*

PIC18F2221 28SO PCM18XN0* DVA18XP280 XLT28SO PMF18WH0* DAF18-4 XLT28SO AC164017* AC164302* ✓*SW006011*

PIC18F2221 28ML PCM18XN0* DVA18XP280 XLT28QFN4* PMF18WH0* DAF18-4 XLT28QFN4* AC164322* ✓*SW006011*

PIC18F2320 28SP PCM18XH2 DVA18XP280 PMF18WC1 DAF18-2 ACICE0204 AC164012 AC164301 ✓*✓SW006011

PIC18F2320 28SO PCM18XH2 DVA18XP280 XLT28SO PMF18WC1 DAF18-2 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2321 28SP PCM18XN0* DVA18XP280 PMF18WH0* DAF18-4 ACICE0204 AC164012* AC164301* ✓*SW006011*

PIC18F2321 28SO PCM18XN0* DVA18XP280 XLT28SO PMF18WH0* DAF18-4 XLT28SO AC164017* AC164302* ✓*SW006011*

PIC18F2321 28ML PCM18XN0* DVA18XP280 XLT28QFN4* PMF18WH0* DAF18-4 XLT28QFN4* AC164322* ✓*SW006011*

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC18F2331 28SP PCM18XL0 DVA18XP280 PMF18WF0 DAF18-4 ACICE0204 AC164035 AC164301 ✓*✓SW006011 DM183011,

DM183021*

PIC18F2331 28SO PCM18XL0 DVA18XP280 XLT28SO PMF18WF0 DAF18-4 XLT28SO AC164036 AC164302 ✓SW006011

PIC18F2331 28MM PCM18XL0 DVA18XP280 XLT28QFN4*PMF18WF0 DAF18-4 XLT28QFN4*AC164035

+AC164031 AC164322 AC164031* ✓SW006011

PIC18F2410 28SP PCM18XN0 DVA18XP280 PCM18WH0 DAF18-4 ACICE0204 AC164035 AC164301 ✓✓SW006011

PIC18F2410 28SO PCM18XN0 DVA18XP280 XLT28SO PCM18WH0 DAF18-4 XLT28SO AC164036 AC164302 ✓SW006011

PIC18F2410 28ML PCM18XN0 DVA18XP280 XLT28QFN4*PCM18WH0 DAF18-4 XLT28QFN4*AC164035

+AC164031 AC164322 AC164031 ✓SW006011

PIC18F2420 28SP PCM18XN0 DVA18XP280 PCM18WH0 DAF18-4 ACICE0204 AC164035 AC164301 ✓ ✓ SW006011

PIC18F2420 28SO PCM18XN0 DVA18XP280 XLT28SO PCM18WH0 DAF18-4 XLT28SO AC164036 AC164302 ✓SW006011

PIC18F2420 28ML PCM18XN0 DVA18XP280 XLT28QFN4*PCM18WH0 DAF18-4 XLT28QFN4*AC164035

+AC164031 AC164322 AC164031 ✓SW006011

PIC18F2431 28SP PCM18XL0 DVA18XP280 PMF18WF0*DAF18-4 ACICE0204 AC164035 AC164301 ✓*✓SW006011 DM183011,

DM183021*

PIC18F2431 28SO PCM18XL0 DVA18XP280 XLT28SO PMF18WF0*DAF18-4 XLT28SO AC164036 AC164302 ✓SW006011

PIC18F2431 28MM PCM18XL0 DVA18XP280 XLT28QFN4*PMF18WF0*DAF18-4 XLT28QFN4*AC164035

+AC164031 AC164322 AC164031*✓SW006011

PIC18F2439 28P AC164012 ✓SW006011

PIC18F2439 28SO AC164017 ✓SW006011

PIC18F2455 28SP PCM18XR0 DVA18XP280 PMF18WL0 DAF18-4 ACICE0204 AC164012 AC164301 ✓AC162063*SW006011 DM163025

PIC18F2455 28SO PCM18XR0 DVA18XP280 XLT28SO PMF18WL0 DAF18-4 XLT28SO AC164036 AC164302 AC162063*

+XLT28SO SW006011 DM163025

PIC18F2480 28SP PCM18XP0 DVA18XP280 PMF18WJ0 DAF18-4 ACICE0204 AC164012 AC164301 ✓*✓*SW006011 DM163011

PIC18F2480 28SO PCM18XP0 DVA18XP280 XLT28SO PMF18WJ0 DAF18-4 XLT28SO AC164017 AC164302 ✓*SW006011

PIC18F2480 28MM PCM18XP0 DVA18XP280 XLT28QFN4*PMF18WJ0 DAF18-4 XLT28QFN4*AC164012

+AC164031 AC164322 AC164031*✓*SW006011

PIC18F24J10 28SP AC164301* AC162067* SW006011

PIC18F24J10 28SO AC164302* AC162067*

+XLT28SO SW006011

PIC18F24J10 28SS AC164307* AC162067*

+XLT28SS SW006011

PIC18F2510 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F2510 28SO PCM18XN0 DVA18XP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2510 28ML PCM18XN0 DVA18XP280 XLT28QFN4*PMF18WH0 DAF18-4 XLT28QFN4*AC164012

+AC164031 AC164322 AC164031 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC18F2515 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012*AC164301 ✓✓SW006011

PIC18F2515 28SO PCM18XN0 DVA18CP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017*AC164302 ✓SW006011

PIC18F2520 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F2520 28SO PCM18XN0 DVA18XP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2520 28ML PCM18XN0 DVA18XP280 XLT28QFN4*PMF18WH0 DAF18-4 XLT28QFN4*AC164012

+AC164031 AC164322 AC164031 ✓SW006011

PIC18F2525 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012*AC164301 ✓✓SW006011

PIC18F2525 28SO PCM18XN0 DVA18XP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017*AC164302 ✓SW006011

PIC18F2539 28P AC164012 ✓SW006011

PIC18F2539 28SO AC164017 ✓SW006011

PIC18F2550 28SP PCM18XR0 DVA18XP280 PMF18WL0 DAF18-4 ACICE0204 AC164012 AC164301 ✓*AC162063 SW006011 DM163025

PIC18F2550 28SO PCM18XR0 DVA18XP280 XLT28SO PMF18WL0 DAF18-4 XLT28SO AC164036 AC164302 AC162063

+XLT28SO SW006011 DM163025

PIC18F2580 28SP PCM18XP0 DVA18XP280 PMF18WJ0 DAF18-4 ACICE0204 AC164012 AC164301 ✓*✓SW006011 DM163011

PIC18F2580 28SO PCM18XP0 DVA18XP280 XLT28SO PMF18WJ0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2580 28MM PCM18XP0 DVA18XP280 XLT28QFN4*PMF18WJ0 DAF18-4 XLT28QFN4*AC164012

+AC164031 AC164322 AC164031*✓SW006011

PIC18F2585 28SP PCM18XP0 DVA18XP280 PMF18WJ0 DAF18-4 ACICE0204 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F2585 28SO PCM18XP0 DVA18XP280 XLT28SO PMF18WJ0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F25J10 28SP AC164301* AC162067* SW006011

PIC18F25J10 28SO AC164302* AC162067*

+XLT28SO SW006011

PIC18F25J10 28SS AC164307* AC162067*

+XLT28SS SW006011

PIC18F2610 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012 AC164301 ✓✓SW006011

PIC18F2610 28SO PCM18XN0 DVA18XP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2620 28SP PCM18XN0 DVA18XP280 PMF18WH0 DAF18-4 ACICE0204 AC164012 AC164301 ✓ ✓ SW006011

PIC18F2620 28SO PCM18XN0 DVA18XP280 XLT28SO PMF18WH0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

PIC18F2680 28SP PCM18XP0 DVA18XP280 PMF18WJ0 DAF18-4 ACICE0204 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F2680 28SO PCM18XP0 DVA18XP280 XLT28SO PMF18WJ0 DAF18-4 XLT28SO AC164017 AC164302 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC18F4220 40P PCM18XH2 DVA18XP400 PMF18WC1 DAF18-2 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011

PIC18F4220 44ML PCM18XH2 DVA18XP400 XLT44QFN2 PMF18WC1 DAF18-2 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034*✓SW006011

PIC18F4220 44PT PCM18XH2 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WC1 DAF18-3 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4221 40P PCM18XN0* DVA18XP400 PMF18WH0* DAF18-4 ACICE0206 AC164012* AC164301* ✓*SW006011*

PIC18F4221 44PT PCM18XN0* DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0* DAF18-5 XLT44PT or

XLT44PT3 AC164020* AC164305* ✓*SW006011*

PIC18F4221 44ML PCM18XN0* DVA18XP400 XLT44QFN2 PMF18WH0* DAF18-4 XLT44QFN2 AC164322* ✓*SW006011*

PIC18F4320 40P PCM18XH2 DVA18XP400 PMF18WC1 DAF18-2 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011

PIC18F4320 44ML PCM18XH2 DVA18XP400 XLT44QFN2 PMF18WC1 DAF18-2 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4320 44PT PCM18XH2 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WC1 DAF18-3 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4321 40P PCM18XN0* DVA18XP400 PMF18WH0* DAF18-4 ACICE0206 AC164012* AC164301* ✓*SW006011*

PIC18F4321 44PT PCM18XN0* DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0* DAF18-5 XLT44PT or

XLT44PT3 AC164020* AC164305* ✓*SW006011*

PIC18F4321 44ML PCM18XN0* DVA18XP400 XLT44QFN2 PMF18WH0* DAF18-4 XLT44QFN2 AC164322* ✓*SW006011*

PIC18F4331 40P PCM18XL0 DVA18XP400 PMF18WF0 DAF18-4 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM183011

PIC18F4331 44PT PCM18XL0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WF0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4331 44ML PCM18XL0 DVA18XP400 XLT44QFN2 PMF18WF0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4410 40P PCM18XN0 DVA18XP400 PCM18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011

PIC18F4410 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PCM18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4410 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PCM18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4420 40P PCM18XN0 DVA18XP400 PCM18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011

PIC18F4420 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PCM18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4420 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PCM18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC18F4431 40P PCM18XL0 DVA18XP400 PMF18WF0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011 DM183011

PIC18F4431 44PT PCM18XL0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WF0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4431 44ML PCM18XL0 DVA18XP400 XLT44QFN2 PMF18WF0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4439 40P AC164012 ✓SW006011

PIC18F4439 44ML AC164012

+AC164034 ✓SW006011

PIC18F4439 44PT AC164020 ✓SW006011

PIC18F4455 40P PCM18XR0 DVA18XP400 PMF18WL0 DAF18-4 ACICE0206 AC164012 AC164301 ✓AC162063 SW006011 DM163025

PIC18F4455 44ML PCM18XR0 DVA18XP400 XLT44QFN2 PMF18WL0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 AC162063

+XLT44QFN2 SW006011 DM163025

PIC18F4455 44PT PCM18XR0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WL0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305

AC162063

+XLT44PT or

XLT44PT3

SW006011 DM163025

PIC18F4480 40P PCM18XP0 DVA18XP400 PMF18WJ0 DAF18-4 ACICE0206 AC164012 AC164301 ✓*✓*SW006011 DM163011

PIC18F4480 44PT PCM18XP0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WJ0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓*SW006011

PIC18F4480 44ML PCM18XP0 DVA18XP400 XLT44QFN2 PMF18WJ0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034*✓*SW006011

PIC18F44J10 40P AC164301* AC162067* SW006011

PIC18F44J10 44PT AC164305*

AC162067*

+XLT44PT or

XLT44PT3

SW006011

PIC18F44J10 44ML AC164322* AC162067*

+XLT44QFN2 SW006011

PIC18F4510 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F4510 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4510 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4515 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011

PIC18F4515 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4515 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC18F4520 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM163022

PIC18F4520 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4520 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4525 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011

PIC18F4525 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4525 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4539 40P AC164012 ✓SW006011

PIC18F4539 44ML AC164012

+AC164034 ✓SW006011

PIC18F4539 44PT AC164020 ✓SW006011

PIC18F4550 40P PCM18XR0 DVA18XP400 PMF18WL0 DAF18-4 ACICE0206 AC164012 AC164301 ✓*AC162063 SW006011 DM163025

PIC18F4550 44ML PCM18XR0 DVA18XP400 XLT44QFN2 PMF18WL0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034*AC162063

+XLT44QFN2 SW006011 DM163025

PIC18F4550 44PT PCM18XR0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WL0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305

AC162063

+XLT44PT or

XLT44PT3

SW006011 DM163025

PIC18F4580 40P PCM18XP0 DVA18XP400 PMF18WJ0 DAF18-4 ACICE0206 AC164012 AC164301 ✓*✓SW006011 DM163011

PIC18F4580 44PT PCM18XP0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WJ0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4580 44ML PCM18XP0 DVA18XP400 XLT44QFN2 PMF18WJ0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034*✓SW006011

PIC18F4585 40P PCM18XP0 DVA18XP400 PMF18WJ0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F4585 44PT PCM18XP0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WJ0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4585 44ML PCM18XP0 DVA18XP400 XLT44QFN2 PMF18WJ0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F45J10 40P AC164301* AC162067* SW006011

PIC18F45J10 44PT AC164305*

AC162067*

+XLT44PT or

XLT44PT3

SW006011

PIC18F45J10 44ML AC164322* AC162067*

+XLT44QFN2 SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC18F4610 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011

PIC18F4610 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4610 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4620 40P PCM18XN0 DVA18XP400 PMF18WH0 DAF18-4 ACICE0206 AC164012 AC164301 ✓ ✓ SW006011 DM163026,

DM163027-2

PIC18F4620 44PT PCM18XN0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WH0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4620 44ML PCM18XN0 DVA18XP400 XLT44QFN2 PMF18WH0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F4680 40P PCM18XP0 DVA18XP400 PMF18WJ0 DAF18-4 ACICE0206 AC164012 AC164301 ✓✓SW006011 DM163011

PIC18F4680 44PT PCM18XP0 DVA18PQ440 XLT44PT or

XLT44PT3 PMF18WJ0 DAF18-5 XLT44PT or

XLT44PT3 AC164020 AC164305 ✓SW006011

PIC18F4680 44ML PCM18XP0 DVA18XP400 XLT44QFN2 PMF18WJ0 DAF18-4 XLT44QFN2 AC164012

+AC164034 AC164322 AC164034 ✓SW006011

PIC18F6310 64PT PCM18XQ0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WK0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011

PIC18F6390 64PT PCM18XQ0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WK0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM163028

PIC18F6410 64PT PCM18XQ0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WK0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011

PIC18F6490 64PT PCM18XQ0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WK0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM163028

PIC18F6520 64PT PCM18XE1 DVA18PQ640 XLT64PT2 or

XLT64PT5 PMF18WA2 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM183020

PIC18F6525 64PT PCM18XK0 DVA18PQ802 XLT64PT2 or

XLT64PT5 PMF18WE0 DAF18-1 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011

PIC18F6527 64PT PCM18XS0* DVA1003 XLT64PT2 or

XLT64PT5 PMF18WS0* DAF18-6 XLT64PT2 or

XLT64PT5 AC174008* AC164303* ✓*SW006011

PIC18F6585 68L PCM18XK0 DVA18PQ802 XLT68L1 PMF18WE0 DAF18-1 XLT68L1 AC174007 AC164308 ✓SW006011

PIC18F6585 64PT PCM18XK0 DVA18PQ802 XLT64PT2 or

XLT64PT5 PMF18WE0 DAF18-1 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM163015

PIC18F6620 64PT PCM18XE1 DVA18PQ640 XLT64PT2 or

XLT64PT5 PMF18WA2 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓(7)*✓SW006011 DM183020

PIC18F6621 64PT PCM18XK0 DVA18PQ802 XLT64PT2 or

XLT64PT5 PMF18WE0 DAF18-1 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

PICmicro® Microcontroller Development Tools (continued)

PIC18F6622 64PT PCM18XS0* DVA1003 XLT64PT2 or

XLT64PT5 PMF18WS0* DAF18-6 XLT64PT2 or

XLT64PT5 AC174008* AC164303* ✓*SW006011

PIC18F6627 64PT PCM18XS0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WS0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM183022

PIC18F6680 68L PCM18XK0 DVA18PQ802 XLT68L1 PMF18WE0 DAF18-1 XLT68L1 AC174007 AC164308 ✓SW006011

PIC18F6680 64PT PCM18XK0 DVA18PQ802 XLT64PT2 or

XLT64PT5 PMF18WE0 DAF18-1 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM163015

PIC18F6720 64PT PCM18XE1 DVA18PQ640 XLT64PT2 or

XLT64PT5 PMF18WA2 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓(7)*✓SW006011 DM183020

PIC18F6722 64PT PCM18XS0 DVA1003 XLT64PT2 or

XLT64PT5 PMF18WS0 DAF18-6 XLT64PT2 or

XLT64PT5 AC174008 AC164303 ✓SW006011 DM183022

PIC18F67J10 64PT AC164319* AC162062* SW006011

PIC18F8310 80PT PCM18XQ0 DVA1003 XLT80PT or

XLT80PT3 PMF18WK0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011

PIC18F8390 80PT PCM18XQ0 DVA1003 XLT80PT or

XLT80PT3 PMF18WK0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM163028

PIC18F8410 80PT PCM18XQ0 DVA1003 XLT80PT or

XLT80PT3 PMF18WK0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011

PIC18F8490 80PT PCM18XQ0 DVA1003 XLT80PT or

XLT80PT3 PMF18WK0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM163028

PIC18F8520 80PT PCM18XE1 DVA18PQ800 XLT80PT or

XLT80PT3 PMF18WA2 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM183020

PIC18F8525 80PT PCM18XK0 DVA18PQ802 XLT80PT or

XLT80PT3 PMF18WE0 DAF18-1 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011

PIC18F8527 80PT PCM18XS0* DVA1003 XLT80PT or

XLT80PT3 PMF18WS0* DAF18-6 XLT80PT or

XLT80PT3 AC174011* AC164304* ✓*SW006011

PIC18F8585 80PT PCM18XK0 DVA18PQ802 XLT80PT or

XLT80PT3 PMF18WE0 DAF18-1 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM163015

PIC18F8620 80PT PCM18XE1 DVA18PQ800 XLT80PT or

XLT80PT3 PMF18WA2 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓(7) ✓SW006011 DM183020

PIC18F8621 80PT PCM18XK0 DVA18PQ802 XLT80PT or

XLT80PT3 PMF18WE0 DAF18-1 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011

PIC18F8622 80PT PCM18XS0* DVA1003 XLT80PT or

XLT80PT3 PMF18WS0* DAF18-6 XLT80PT or

XLT80PT3 AC174011* AC164304* ✓*SW006011

PIC18F8627 80PT PCM18XS0 DVA1003 XLT80PT or

XLT80PT3 PMF18WS0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM183022

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

PICmicro® Microcontroller Development Tools (continued)

PIC18F8680 80PT PCM18XK0 DVA18PQ802 XLT80PT or

XLT80PT3 PMF18WE0 DAF18-1 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM163015

PIC18F8720 80PT PCM18XE1 DVA18PQ800 XLT80PT or

XLT80PT3 PMF18WA2 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓(7) ✓SW006011 DM183020

PIC18F8722 80PT PCM18XS0 DVA1003 XLT80PT or

XLT80PT3 PMF18WS0 DAF18-6 XLT80PT or

XLT80PT3 AC174011 AC164304 ✓SW006011 DM183022

PIC18F87J10 80PT TBD AC162062* SW006011

rfPIC® Microcontroller Development Tools

rfPIC12C509AF 20JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓

rfPIC12C509AF 20SS PCM16XA0 DVA12XP080 XLT20SS AC124002 AC164307 ✓

rfPIC12C509AG 18JW PCM16XA0 DVA12XP080 AC124001 AC164301 ✓(7)

rfPIC12C509AG 18SO PCM16XA0 DVA12XP080 XLT18SO AC124002 AC164302 ✓(7)

rfPIC12F675F 20SS PCM12XB0 DVA12XP081 XLT20SS AC124002 AC164307 ✓(7)*

DV164102

AC164101

AC164103

rfPIC12F675H 20SS PCM12XB0 DVA12XP081 XLT20SS AC124002 AC164307 ✓(7)*

rfPIC12F675K 20SS PCM12XB0 DVA12XP081 XLT20SS AC124002 AC164307 ✓(7)*

DV164102

AC164102

AC164104

rfRXD0420 32LQ DV164102

rfRXD0920 32LQ

dsPIC® DSC Development Tools

dsPIC30F2010 28SO PMF30XA1 DAF30-4 XLT28SO AC30F004 AC164302 ✓SW006012 DM300017

dsPIC30F2010 28SP PMF30XA1 DAF30-4 ACICE0204 AC30F004 AC164301 ✓SW006012 DM300017

DM300018*

dsPIC30F2010 28MM PMF30XA1 DAF30-4 XLT28QFN4* AC164322 ✓SW006012

dsPIC30F2011 18SO PMF30XA1*DAF30-4 XLT18SO AC30F005*AC164302*✓*SW006012

dsPIC30F2011 18P PMF30XA1*DAF30-4 ACICE0202 AC30F005*AC164301*✓*SW006012 DM300018*

dsPIC30F2011 28ML PMF30XA1*DAF30-4 AC164322*✓*SW006012

dsPIC30F2012 28SO PMF30XA1*DAF30-4 XLT28SO AC30F004*AC164302*✓*SW006012 DM300017

dsPIC30F2012 28SP PMF30XA1*DAF30-4 ACICE0204 AC30F004*AC164301*✓*SW006012 DM300017,

DM300018*

dsPIC30F2012 28ML PMF30XA1*DAF30-4 XLT28QFN4*AC164322*✓*SW006012

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

dsPIC® DSC Development Tools (continued)

dsPIC30F3010 28SO PMF30XA1 DAF30-4 XLT28SO AC30F004 AC164302 ✓SW006012 DM300017

dsPIC30F3010 28SP PMF30XA1 DAF30-4 ACICE0204 AC30F004 AC164301 ✓SW006012 DM300017,

DM300018*

dsPIC30F3010 44ML PMF30XA1 DAF30-4 XLT44QFN4*AC164322 ✓SW006012

dsPIC30F3011 40P PMF30XA1 DAF30-4 ACICE0206 AC30F003 AC164301 ✓SW006012 DM30018*

dsPIC30F3011 44PT PMF30XA1 DAF30-3 XLT44PT or

XLT44PT3 AC30F006 AC164305 ✓SW006012

dsPIC30F3011 44ML PMF30XA1 DAF30-4 XLT44QFN2 AC164322 ✓SW006012

dsPIC30F3012 18SO PMF30XA1 DAF30-4 XLT18SO AC30F005*AC164302 ✓SW006012

dsPIC30F3012 18P PMF30XA1 DAF30-4 ACICE0202 AC30F005*AC164301 ✓SW006012 DM300018*

dsPIC30F3012 44ML PMF30XA1 DAF30-4 XLT44QFN5* AC164322 ✓SW006012

dsPIC30F3013 28SO PMF30XA1 DAF30-4 XLT28SO AC30F004 AC164302 ✓SW006012 DM300017

dsPIC30F3013 28SP PMF30XA1 DAF30-4 ACICE0204 AC30F004 AC164301 ✓SW006012 DM300017,

DM300018*

dsPIC30F3013 44ML PMF30XA1 DAF30-4 XLT44QFN3*AC164322 ✓SW006012

dsPIC30F3014 40P PMF30XA1 DAF30-4 ACICE0206 AC30F003 AC164301 ✓SW006012 DM300018*

dsPIC30F3014 44PT PMF30XA1 DAF30-3 XLT44PT or

XLT44PT3 AC30F006 AC164305 ✓SW006012

dsPIC30F3014 44ML PMF30XA1 DAF30-4 XLT44QFN2 AC164322 ✓SW006012

dsPIC30F4011 40P PMF30XA1 DAF30-4 ACICE0206 AC30F003 AC164301 ✓SW006012 DM300018*

dsPIC30F4011 44PT PMF30XA1 DAF30-3 XLT44PT or

XLT44PT3 AC30F006 AC164305 ✓SW006012

dsPIC30F4011 44ML PMF30XA1 DAF30-4 XLT44QFN2 AC164322 ✓SW006012

dsPIC30F4012 28SO PMF30XA1 DAF30-4 XLT28SO AC30F004 AC164302 ✓SW006012 DM300017

dsPIC30F4012 28SP PMF30XA1 DAF30-4 ACICE0204 AC30F004 AC164301 ✓SW006012 DM300017,

DM300018*

dsPIC30F4012 44ML PMF30XA1 DAF30-4 XLT44QFN4* AC164322 ✓SW006012

dsPIC30F4013 40P PMF30XA1 DAF30-4 ACICE0206 AC30F003 AC164301 ✓SW006012 DM300018*

dsPIC30F4013 44PT PMF30XA1 DAF30-3 XLT44PT or

XLT44PT3 AC30F006 AC164305 ✓SW006012

dsPIC30F4013 44ML PMF30XA1 DAF30-4 XLT44QFN2 AC164322 ✓SW006012

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Cross Reference

dsPIC® DSC Development Tools (continued)

dsPIC30F5011 64PT PMF30XA1 DAF30-2 XLT64PT2 or

XLT64PT5 AC30F008 AC164319 ✓SW006012 DM300016

dsPIC30F5013 80PT PMF30XA1 DAF30-2 XLT80PT or

XLT80PT3 AC30F007 AC164320 ✓SW006012

DM300014,

DM300004-1,

DM300004-2

dsPIC30F5015 64PT PMF30XA1*DAF30-2 XLT64PT2 or

XLT64PT5 AC30F008*AC164319*✓*SW006012*

dsPIC30F5016 80PT AC164320*✓*SW006012*

dsPIC30F6010 80PF PMF30XA1 DAF30-2 XLT80PT2 AC30F001 AC164314 ✓SW006012 DM300020

dsPIC30F6010A 80PF PMF30XA1*DAF30-2 XLT80PT2 AC164314*✓*SW006012*DM300020

dsPIC30F6010A 80PT PMF30XA1*DAF30-2 XLT80PT or

XLT80PT3 AC30F007*AC164320*✓*SW006012*DM300020

dsPIC30F6011 64PF PMF30XA1 DAF30-2 XLT64PT3 or

XLT64PT4 AC30F002 AC164313 ✓SW006012 DM300016

dsPIC30F6011A 64PF PMF30XA1*DAF30-2 XLT64PT3 or

XLT64PT4 AC30F008*AC164313*✓*SW006012

dsPIC30F6011A 64PT PMF30XA1*DAF30-2 XLT64PT2 or

XLT64PT5 AC30F008*AC164319*✓*SW006012 DM300016

dsPIC30F6012 64PF PMF30XA1 DAF30-2 XLT64PT3 or

XLT64PT4 AC30F002 AC164313 ✓SW006012 DM300016

dsPIC30F6012A 64PF PMF30XA1*DAF30-2 XLT64PT3 or

XLT64PT4 AC30F002*AC164313*✓*SW006012

dsPIC30F6012A 64PT PMF30XA1*DAF30-2 XLT64PT2 or

XLT64PT5 AC30F008*AC164319*✓*SW006012 DM300016

dsPIC30F6013 80PF PMF30XA1 DAF30-2 XLT80PT2 AC30F001 AC164314 ✓SW006012 DM300014

dsPIC30F6013A 80PF PMF30XA1*DAF30-2 XLT80PT2 AC30F001*AC164314*✓*SW006012

dsPIC30F6013A 80PT PMF30XA1*DAF30-2 XLT80PT or

XLT80PT3 AC30F007*AC164320*✓*SW006012 DM300014

dsPIC30F6014 80PF PMF30XA1 DAF30-2 XLT80PT2 AC30F001 AC164314 ✓SW006012

DM300014,

DM300004-1,

DM300004-2

dsPIC30F6014A 80PF PMF30XA1*DAF30-2 XLT80PT2 AC30F001*AC164314*✓*SW006012

dsPIC30F6014A 80PT PMF30XA1*DAF30-2 XLT80PT or

XLT80PT3 AC30F007*AC164320*✓*SW006012

DM300014,

DM300004-1,

DM300004-2

dsPIC30F6015 64PT AC164319*✓*SW006012*

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards

MPLAB® ICE 2000 System (1) MPLAB® ICE 4000 System (2)

Part Number Lead Count/

Pkg Type

Processor

Module

Device

Adapters

Transition

Socket

Processor

Module

Device

Adapters

Transition

Socket

PRO MATE® II

Socket

Module (3,4)

MPLAB® PM3

Socket

Module (8)

PICSTART®

Plus (5)

MPLAB® ICD 2

(6)

MPLAB® CXX

Compiler

Demonstration

Boards or

Evaluation Kits

NOTE: See complete list of notes following this table.

Development Systems Ordering Guide

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards - NOTES

NOTES 1: MPLAB® ICE 2000 pod available separately. (ICE2000)

2: MPLAB® ICE 4000 pod available separately. (ICE4000)

3: PRO MATE® II Programmer unit (no longer available). (DV007003)

4: Optional In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II available separately. (AC004004)

5: PICSTART® Plus (DV003001)

6: MPLAB® ICD 2 In-Circuit Debugger. Configurations are:

(DV164005) ICD 2 module, USB cable and ICD cable.

(DV164006) ICD 2 module, USB cable, ICD cable, serial cable, PICDEM™ 2 Plus and power supply.

(DV164007) ICD 2 module, USB cable, ICD cable, serial cable and power supply;

(DV164030) ICD 2 module, USB cable, ICD cable, serial cable and dsPICDEM™ Starter Demo Board;

(AC162049) ICD 2 Universal Programming Module;

(AC162051) ICD or ICD 2 28/40 PDIP Header Interface Board.

7: Custom adapter required; not available from Microchip. See “Readme” for PICSTART® Plus.

8:MPLAB® PM3 Programmer Unit available separately. (DV007004). ICSP™ function is built-in with MPLAB® PM3 Programmer.

(AC164350) MPLAB® PM3 Adapter for PRO MATE® II Socket modules.

* New product or future support. Contact Microchip web site at www.microchip.com for availability.

✓Supported with basic configuration. If a part number is listed in the column, that part is required and available separately.

Cross Reference

Demonstration Boards and Evaluation Kits

Part Number Description

PICmicro® Demonstration Kits

DM163001 PICDEM™ 1 Demo Board for PIC16C5X, 55X, 62X, CE62X, 71, 710, 711, 715, 770, 771, 83, 84, and PIC17C42, 43, 44

DM163003 PICDEM™ 3 Demo Board for PIC16C923, 924 LCD

DM163006 PICDEM™ 18R Demo Board for PIC18C601/801

DM163014 PICDEM™ 4 Demo Board for PIC12F629, 675, PIC16F630, 676, 684, 627A, 628A, 648A, 818, 819, 87, 88, PIC18F1220, 1320

DM163022 PICDEM™ 2 Plus Demo Board for PIC16C62, 63, 64, 65, 66, 67, 72, 73, 74, 76, 77, 87X, 773, 774 and PIC18CXX2, 642, 662, and PIC18FXXX

DM163026 Low-Power Solutions Demo Board

DM163028 PICDEM™ LCD Demo Board (uses 64L/80L PIC18FXX90 and 28L/40L PIC16F91X family)

DV164101 PICkit™ 1 8/14P Flash Development Kit for PIC12F629, 675 and PIC16F630, 676

DV164102 rfPIC® Development Kit 1

DV164120*PICkit 2 Starter Kit

AC164101 rfPIC® Transmitter Module (433.92 MHz)

AC164102 rfPIC® Transmitter Module (315 MHz)

AC164103 rfRXD Receiver Module (433.92 MHz)

AC164104 rfRXD Receiver Module (315 MHz)

AC164120 Signal Analysis PICtail™ Daughter Board

AC163020 PIC10F2XX Programmer Adapter

AC163021 6L SOT-23 to 8P DIP Adapter Kit

DM173001 PICDEM™ 17 Demo Board for PIC17CXX

DM183011 PICDEM™ MC Development Board (uses 28L/40L PIC18FXX31 family)

DM183021* PICDEM™ MC LV Development Board (uses 28L PIC18F2331, 2431, dsPIC30F family)

DM183022 PICDEM™ HPC Explorer Board

Connectivity Demonstration Kits

DM163004-LT PICDEM.net™ TCP/IP Demo Board (with no text book)

DM163005 PICDEM™ LIN Demo Board for PIC16C432/433 LIN bus

DM163007 PICDEM™ CAN-LIN 1 Demo Board (uses 68L/84L PIC18CXX8 family)

DM163010 PICDEM™ USB Demo Board for PIC16C7X5

DM163011 PICDEM™ CAN-LIN 2 Demo Board (uses 28L/40L PIC18FXX8 and PIC18FXX8X family)

DM163015 PICDEM™ CAN-LIN 3 Demo Board (uses 64L/80L PIC18FXX8X family)

DM163025 PICDEM™ FS USB Demo Board

DM163027-2 PICDEM™ Z 2.4 GHz Demonstration Kit

AC163027-1 PICDEM™ Z Motherboard

AC163027-2 PICDEM™ Z 2.4 GHz RF Card

* Contact Microchip web site at www.microchip.com for availability.

Development Systems Ordering Guide

Mixed Signal Control Demonstration Kits

AC163001 PICDEM™ MSC 1 Voltage Boost Demo Board; requires DM163012

AC163002 PICDEM™ MSC 1 High Power IR Demo Board; requires DM163012

AC163003 PICDEM™ MSC 1 Delta Sigma Demo Board; requires DM163012

AC163004 PICDEM™ MSC 1 Flow Rate Sensor Demo Board; requires DM163012

DM163012 PICDEM™ MSC 1 Mixed Signal Controller Demo Board for PIC16C781/782

dsPIC® Digital Signal Controller Demonstration Kits

DM300004-1 dsPICDEM.net™ 1 FCC/JATE PSTN Support, Ethernet NIC Demo Board

DM300004-2 dsPICDEM.net™ 2 CTR-21 PSTN Support, Ethernet NIC Demo Board

DM300014 dsPICDEM™ 1.1 General Purpose Demo Board

DM300016 dsPICDEM™ 64-Pin Starter Demo Board

DM300017 dsPICDEM™ 28-Pin Starter Demo Board

DM300018* dsPICDEM™ 2 Demo Board

DM300020 dsPICDEM™ MC1 Motor Control Development Board

DM300021 dsPICDEM™ MC1H 3-Phase High Voltage Power Module

DM300022 dsPICDEM™ MC1L 3-Phase Low Voltage Power Module

dsPIC® 16-bit DSC Software Tools

SW300001 Digital Filter Design

SW300002 dsPIC® V.22/V.22bis Soft Modem Library (free download: www.microchip.com)

SW300003-EVAL dsPIC® V.32 Soft Modem Library (Eval Copy)

SW300003, 04, 05 dsPIC® V.32 Soft Modem Library (5K, 25K, 100K licenses, respectively)

SW300006*dsPIC® V.22/V.22bis Soft Modem Library by Vocal Technology

SW300010-EVAL dsPIC® Speech Recognition (Eval Copy)

SW300010, 11, 12 dsPIC® Speech Recognition (5K, 25K, 100K licenses, respectively)

SW300020 dsPIC30 Math Library: Double-Precision Floating Point Routines

SW300021 dsPIC30 Peripheral Library: Peripheral Initialization and Control Routines

SW300022 dsPIC30 DSP Library: Data Signal Processing Library Suite (FFT, Filters)

SW300023 dsPICworks™ Visual Algorithm Analyzer: Data Analyzer and Converter Tool

SW300030 dsPIC® CMX Scheduler: Multi-tasking, Preemptive Scheduler for dsPIC30F

Demonstration Boards and Evaluation Kits

Part Number Description

* Contact Microchip web site at www.microchip.com for availability.

Cross Reference

dsPIC® 16-bit DSC Software Tools (continued)

SW300031 CMX-RTX for dsPIC® DSC: Fully Preemptive RTOS

SW300032 CMX-Tiny+ for dsPIC® DSC: Preemptive RTOS

SW300040-EVAL, 5K, 25K, 100K dsPIC® Noise Suppression Library (Eval, 5K, 25K, 100K licenses, respectively)

SW300050-EVAL, 5K, 25K, 100K dsPIC® Symmetric Embedded Encryption Library (Eval, 5K, 25K, 100K licenses, respectively)

SW300055-EVAL, 5K, 25K, 100K dsPIC® Asymmetric Embedded Encryption Library (Eval, 5K, 25K, 100K licenses, respectively)

SW300060-EVAL, 5K, 25K, 100K dsPIC® Acoustic Echo Cancellation Library (Eval, 5K, 25K, 100K licenses, respectively)

SW300070-EVAL, 5, 25, 100K* dsPIC® Speech Coding/Decoding Library (Eval, 5K, 25K, 100K licenses, respectively)

PowerSmart® Systems

Model Name/

Part Number Description

PS042 PS401 PowerCal™ Board

PS051 PowerInfo™ 2 Configuration Interface Board for use with PS70X and PS50X

PS052 PowerCal™ 2 Configuration Interface Board for use with PS70X and PS50X

PS070*PowerMate™ Development Software for PS700 Applications

PS2070*PS200 Configurable Battery Charger Evaluation Board

PS2070EV*PS200 Configurable Battery Charger Evaluation Board with PS051 PowerInfo™ 2

PS5100 PS501 6-12 cell NiMH Module

PS5100EV PS501 6-12 cell NiMH Module with PS051

PS5162 2-cell Li-Ion/Poly Fuel Gauge with safety

PS5162EV 2-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2

PS5163 3-cell Li-Ion/Poly Fuel Gauge with safety

PS5163EV 3-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2

PS5164 4-cell Li-Ion/Poly Fuel Gauge with safety

PS5164EV 4-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2

PS7051 Single Cell Li-Ion Battery Monitor with safety

PS7052 Two Cell Li-Ion Battery Monitor with safety

PS7070 PS700 Battery Monitor Evaluation Board

PS7070EV PS700 Battery Monitor Evaluation Board with PS051 PowerInfo™ 2

PS8070*PS8X0 Li-Ion/Poly Single Cell Fuel Gauge

PS8070EV*PS8X0 Li-Ion/Poly Single Cell Fuel Gauge with PS051 PowerInfo™ 2

* Contact Microchip web site at www.microchip.com for availability.

Demonstration Boards and Evaluation Kits

Part Number Description

* Contact Microchip web site at www.microchip.com for availability.

Development Systems Ordering Guide

Memory Evaluation/Developer’s Kits

SEEVAL® 32 Serial EEPROM Developer’s Kit DV243002 All serial EEPROMS, 24XX, 93XX, 25XX series

KEELOQ® Evaluation Kits

HCS101 HCS200/201 HCS300/301/320 HCS360/361 HCS362 HCS365/370 HCS410/412 HCS473 HCS500/515 HCS512

KEELOQ® Transponder Evaluation Kit*– – – – – – DM303005 – –

KEELOQ® Evaluation Kit II*DM303006 DM303006 DM303006 DM303006 DM303006 DM303006 DM303006 DM303006 DM303006

PRO MATE® II Universal Programmer for SOIC*AC004002 AC004002 AC004002 AC004002 AC004002 AC004003 AC004002 AC004003 –AC164002

PRO MATE® II Universal Programmer for DIP*AC004001 AC004001 AC004001 AC004001 AC004001 AC004007 AC004001 AC004007 – AC164001

PRO MATE® II Universal Programmer for ICSP™*AC004004 AC004004 AC004004 AC004004 AC004004 AC004004 AC004004 AC004004 AC004004

* Support is limited to PRO MATE® II using MPLAB® IDE release 5.70.

RFID Evaluation/Developer’s Kits

MCRF355 MCRF450/452

13.56 MHz Anti-Collision microID® Developer’s Kit DV103003, DV103006 DV103006

microID® Programmer Kit only for MCRF355 PG103003 –

Analog/Interface Demo/Eval/Developer’s Kits

Interface Part Number Devices Supported

MCP2140 IrDA® Wireless Temp. Demo MCP2140DM-TMPSNS MCP2140

MCP215X Data Logger Demo Board MCP215XDM MCP2150/55

MCP250XX CAN I/O Expanders Developer’s Kit DV250501 MCP25020, MCP25025, MCP25050, MCP25055

MCP2510/2515 CAN Developer’s Kit DV251001 MCP2510, MCP2515

MCP2120/2150 Developer’s Kit DM163008 MCP2120, MCP2150

MCP23X08 Evaluation Board MCP23X08EV MCP23008, MCP23S08

MCP23X17 Evaluation Board MCP23X17EV MCP23017, MCP23S17

Linear Part Number Devices Supported

MCP6S22 PGA PICtail™ Demo Board MCP6S22DM-PICTL MCP6S22/92

MCP6SX2 PGA Photodiode PICtail™ Demo Board MCP6SX2DM-PCTLPD MCP6S22/92

MCP6SX2 PGA Thermistor PICtail™ Demo Board MCP6SX2DM-PCTLTH MCP6S22/92

MCP6S2X PGA Evaluation Board MCP6S2XEV MCP6S2X

Mixed Signal Part Number Devices Supported

Mixed Signal PICtail™ Demo Board MXSIGDM TX132X, MCP330X, MCP320X, MCP494X, MCP3221, MCP3201, MCP1525, MCP1541

Evaluation Kit for Sigma-Delta A/D Converter Family TX3400EV TX3400X

Single-Dual A/D DV3201A MCP3001, MCP3002, MCP3201, MCP3202

MCP3201/02 Evaluation System Daughter Board DV3201A MCP3201/02

Cross Reference

Mixed Signal (continued) Part Number Devices Supported

MXDEV Analog Evaluation System DVMCPA MCP3001/02, MCP3004,/08, MCP3201/02, MCP3204/08

MCP3204/08 Evluation System Daughter Board DV3204A MCP3204, MCP3208

MCP42XXX Digital Pot Evaluation Kit DV42XXX MCP42010, MCP42050, MCP42100

MCP402X Evaluation Board MCP402XEV MCP4021, MCP4022, MCP4023, MCP4024

Power Management Part Number Devices Supported

MCP1612 Synchronous Buck Regulator Evaluation Board MCP1612EV MCP1612

MCP1630 +12V Dual Output Buck Converter Ref. Design MCP1630RD-DDBK1 MCP1630

MCP1630 Li-Ion Multi Bay Battery Charger Ref. Design MCP1630RD-LIC1 MCP1630

MCP1630 NiMH Battery Charger Demo Board MCP1630DM-NMC1 MCP1630

MCP1601 Buck Regulator Evaluation Board MCP1601EV MCP1601

Voltage Supervisor Evaluation Board VSUPEV SOT-23 packages

MCP7386X Li-Ion Battery Charger Evaluation Board MCP7386XEV MCP73861/62

MCP165X 3W White LED Demo Board MCP1650DM-LED1 MCP1650/51

MCP1650 Boost Controller Evaluation Board MCP1650EV MCP1650

MCP7384X Li-Ion Battery Charger MCP7384XEV MCP7384X

MCP7382X Li-Ion Battery Charger MCP7382XEV MCP7382X

MCP73855 Evaluation Board MCP73855EV MCP73855

Voltage Supervisor SOT23-5/6 Evaluation Board VSUPEV2 SOT23-5/6-lead packages

MCP1726 Evaluation Board MCP1726EV MCP1726

Thermal Management Tools Part Number Devices Supported

MCP9800 Thermal Sensor PICtail™ Demo Board MCP9800DM-PCTL MCP9800

Demo Board for Tiny Serial Digital Thermal Sensor TC74DEMO TC74

Fan Controller Demo Board for TC652 TC652DEMO TC652

Fan Controller Demo Board for TC650 TC650DEMO TC650

Evaluation Kit for the Fan Speed Controllers TC642EV TC642, TC646, TC647, TC648, TC649, TC642B, TC646B, TC647B, TC648B, TC649B

TC72 Digital Temperature Sensor TC72DM-PICTL TC72

TC77 Thermal Sensor PICtail™ Demo TC77DM-PICTL TC77

Demo Board for Fan Speed Controllers TC642DEMO TC642

TC1047A Temperature to Voltage TC1047ADM-PICTL TC1047A

Analog/Interface Demo/Eval/Developer’s Kits

Development Systems Ordering Guide

NOTES:

© 2005 Microchip Technology Inc. DS30177T-page 141
Index
A
Analog and Mixed-Signal Demo Boards and Kits
13.56 MHz Anticollision microID Developer’s Kit for 
MCRF355/360 (DV103003)  ................................... 89
13.56 MHz Anticollision microID Developer’s Kit for 
MCRF355/360/45X (DV103006) ............................ 90
FilterLab Active Filter Design Software  .................................. 95
MCP1252 Charge Pump Backlight Demo Board 
(MCP1252DM-BKLT) ............................................. 93
MCP1601 Buck Regulator Evaluation Board 
(MVCP1601EV) ..................................................... 93
MCP1630 NiMH Battery Charger Demo Board 
(MCP1630DM-NMC1) ............................................ 93
MCP1650 Boost Controller Evaluation Board 
(MCP1650EV) ........................................................ 93
MCP165X 3W White LED Demo Board 
(MCP1650DM-LED1) ............................................. 93
MCP1726 LDO Evaluation Board (MCP1726EV)  .................. 93
MCP2120/2150 Developer’s Kit (DM163008)  ........................ 91
MCP2120/2150 Infrared Developer’s Kit (DM163008) ........... 87
MCP2140 IrDA Wireless Temp Demo Board 
(MCP2140DM-TMPSNS) ....................................... 91
MCP215X Data Logger Demo Board (MCP215XDM)  ........... 91
MCP250XX CAN I/O Expander Developer’s Kit 
(DV250501) ...................................................... 86, 91
MCP2510 CAN Developer’s Kit (DV251001)  ......................... 85
MCP2510/2515 CAN Developer’s Kit (V251001) ................... 91
MCP3201/02 Single/Dual A/D Converter 
MXDEV Evaluation System Daughter Board 
(DV3201A) ............................................................. 92
MCP3204/08 MXDEV Evaluation System 
Daughter Board (DV32XXX)  .................................. 92
MCP3221 12-Bit A/D PICtail Daughter Board 
(MCP3221DM-PCTL) ............................................. 92
MCP402X Digital Potentiometer Evaluation 
Board Kit (MCP402XEV) ........................................ 92
MCP41XXX/42XXX Digital Potentiometer 
Evaluation Board (DV42XXX)  ................................ 80
MCP42XXX Digital Pot MXDEV Evaluation 
System Daughter Board (DV42XXX)  ..................... 92
MCP6S22 PGA PICtail Daughter Board 
(MCP6S22DM-PCTL) ............................................ 91
MCP6S2X PGA Evaluation Board (MCP6S2XEV)  ................ 91
MCP6S2X PGA Photodiode PICtail Daughter 
Board (MCP6SX2DM-PCTLPD)  ............................ 91
MCP6S2X PGA Thermistor PICtail Daughter 
Board (MCP6SX2DM-PCTLTH)  ............................ 91
MCP7382X Li Ion Battery Charger 
Evaluation Board (MCP382XEV) ........................... 93
MCP7384X Li Ion Battery Charger 
Evaluation Board (MCP7384XEV) ......................... 93
MCP9700 Thermal Sensor PICtail 
Daughter Board (MCP9700DM-PCTL)  .................. 94
microID Contact Programmer Kit for 
MCRF355/360 (PG103003)  ............................. 89, 90
Mixed-Signal PICtail Daughter Board (MXSIGDM) ................ 92
MXDEV 1 Analog Evaluation System Driver Board 
(DVMCPA) .............................................................81
MXDEV 1 MCP3XXX Quad/Octal ADC Evaluation 
System Daughter Board Kit (DV3204A) ................. 83
MXDEV 1 MCP3XXX Single/Dual ADC Evaluation 
System Daughter Board (DV3201A) ...................... 82
MXDEV Analog Evaluation System (DVMCPA)  .....................92
PICDEM MSC1 Delta-Sigma ADC Daughter 
Board (AC163003) ..................................................79
PICDEM MSC1 Demonstration Kit (DM163012)  ....................78
PICDEM MSC1 Flow Rate Sensor Daughter 
Board (AC163004) ..................................................79
PICDEM MSC1 Infrared (IR) Driver Daughter 
Board (AC163002) ..................................................79
PICDEM MSC1 Switch Mode Power Supply (SMPS) 
Daughter Board (AC163001) ..................................79
SEEVAL 32 Serial EEPROM Evaluation System 
Designer’s Kit (DV243002) .....................................88
SOIC 8-Lead Evaluation Board (SOIC8EV)  ...........................93
SOT-23-3 Voltage Supervisor Evaluation 
Board (VSUPEV) ....................................................93
SPICE Software Models  .........................................................95
TC1047A Temperature-to-Voltage Converter PICtail 
Daughter Board (1047ADM-PCTL)  ........................94
TC340X Delta-Sigma A/D Converter 
Evaluation Kit (TC3400EV) .....................................92
TC642DEMO Fan Controller Demo Board for 
TC642/646/647/648/649 (TC642DEMO) ................84
TC642EV Evaluation Kit for Brushless DC Fan 
Controllers (TC642EV)  ...........................................84
TC64X/64XB Fan Speed Controller Demo Board 
(TC642DEMO) ........................................................94
TC64X/64XB Fan Speed Controller Evaluation 
Board (TC642EV)  ...................................................94
TC650 Fan Speed Controller Demo Board 
(TC650DEMO) ........................................................94
TC650DEMO Fan Controller Demo Board for 
TC650/651 (TC650DEMO) .....................................84
TC652 Fan Speed Controller Demo Board 
(TC652DEMO) ........................................................94
TC652DEMO Fan Controller Demo Board for 
TC652/653 (TC652DEMO) .....................................84
TC72 Digital Temperature Sensor PICtail Daughter 
Board (TC72DM-PICTL) .........................................94
TC74 Serial Digital Thermal Sensor Demo Board 
(TC74DEMO) ..........................................................94
TC74DEMO Serial Digital Temperature Sensor 
Demo Board (TC74DEMO)  ....................................84
TC77 Thermal Sensor PICtail Daughter Board 
(TC77-DM-PICTL) ..................................................94
B
Battery Management Products
PowerSmart Battery Manager Evaluation Kit for 
Lithium Ion/Polymer Chemistries/2-Cell 
(PS5162EV) .........................................................100
PowerSmart Battery Manager Evaluation Kit for 
Lithium Ion/Polymer Chemistries/3-Cell 
(PS5163EV) .........................................................100
PowerSmart Battery Manager Evaluation Kit for 
Lithium Ion/Polymer Chemistries/4-Cell 
(PS5164EV) .........................................................100
PowerSmart Battery Monitor Evaluation Kit for 
1 and 2 Series Cell Lithium Ion/Polymer 
Chemistries (PS7070EV) ......................................101
C
Cross Reference
Development Systems Cross Reference ......................104–140

Development Systems Ordering Guide
DS30177T-page 142 © 2005 Microchip Technology Inc.
D
dsPIC DSC Demo Boards and Kits
MPLAB ICD 2 with dsPICDEM 1.1 General Purpose 
Demonstration Board (DV164032) ......................... 72
MPLAB ICD 2 with dsPICDEM Starter 
Demonstration Board (DV164030) ......................... 70
dsPIC DSC Development Boards, Kits
24V BLDC Motor (AC300020) ................................................ 74
3-Phase ACIM (AC300021)  ................................................... 74
dsPICDEM 1.1 General Purpose Development 
Board (DM300014)  ................................................ 72
dsPICDEM 2 Development Board (DM300018) ..................... 73
dsPICDEM 28-Pin Starter Development Board 
(DM300017) ........................................................... 71
dsPICDEM MC1 Motor Control Development 
Board (DM300020)  ................................................ 74
dsPICDEM MC1H 3-Phase High-Voltage 
Power Module (DM300021)  ................................... 74
dsPICDEM MC1L 3-Phase Low-Voltage 
Power Module (DM300022)  ................................... 74
dsPICDEM Starter Development Board (DM300016) ............ 70
dsPICDEM.net 1 Connectivity Development 
Board (DM300004-1)  ............................................. 75
dsPICDEM.net 2 Connectivity Development 
Board (DM300004-2)  ............................................. 75
PIC18F4431 Plug-in Module (MA18F4431)  ........................... 74
E
Emulator Systems
MPLAB ICE 2000 Modular In-Circuit Emulator 
Pod (ICE2000)  ....................................................... 42
MPLAB ICE 2000/4000 Ordering Information  ........................ 45
MPLAB ICE 2000/4000 Replacement Accessories  ............... 44
MPLAB ICE 4000 Modular In-Circuit Emulator 
Pod (ICE4000)  ....................................................... 43
H
Hardware
Ethernet PICtail Daughter Board ............................................ 39
Ethernet PICtail Daughter Board (AC164121) ....................... 39
MPLAB ICD 2 Accessories
MPLAB ICD 2 14-Pin Header - 
PIC16F638/636 (AC162057)  ......................... 33
MPLAB ICD 2 14-Pin Header - 
PIC16F684 (AC162055)  ................................ 33
MPLAB ICD 2 14-Pin Header - 
PIC16F688 (AC162056)  ................................ 33
MPLAB ICD 2 18-Pin Header - 
PIC16F716 (AC162054)  ................................ 33
MPLAB ICD 2 20-Pin Header - 
PIC16C785 (AC162060) ................................ 33
MPLAB ICD 2 8/14-Pin Header - 
PIC16F505 (AC162059)  ................................ 33
MPLAB ICD 2 8-Pin Header - 
PIC12F683 (AC162058)  ................................ 33
MPLAB ICD 2 Header Interface 
Module (AC162051) ....................................... 33
PIC12F629/675 MPLAB ICD 2 Header 
Interface Module (AC162050) ........................ 33
RS-232 and Power Supply Kit (AC162048)  ................... 33
Universal Programming Module (AC162049)  ................ 33
MPLAB ICD 2 Evaluation Kit (DV164006)  ..............................32
MPLAB ICD 2 Module (DV164005)  ........................................32
MPLAB ICD 2 Module ws (DV164007) ...................................32
MPLAB ICD 2 with dsPICDEM 1.1 General Purpose 
Demonstration Board (DV164032)  .........................32
MPLAB ICD 2 with dsPICDEM Starter 
Demonstration Board (DV164030)  .........................32
PIC10F2XX Programmers/Adapters
Baseline Flash MCU Programmer (PG164101)  .............37
PIC10F2XX SOT-23 to DIP-8 Programmer 
Adapter Kit (AC163021)  .................................37
PIC10F2XX Universal Programmer Adapter 
(AC163020) ....................................................37
PIC16F630/676 MPLAB ICD 2 Header Interface 
Module - 14-Pin DIP (AC162052) ...........................33
PIC16F648A/627A/628A MPLAB ICD 2 Header 
Interface Module - 18-Pin DIP (AC162053) ............33
PICkit 1 Flash Starter Firmware Upgrade Kit 
(UK164101) ............................................................35
PICkit 1 Flash Starter Kit
PIC10F2XX SOT-23 to DIP-8 Programmer 
Adapter Kit (AC163021)  .................................35
PIC10F2XX Universal Programmer 
Adapter (AC163020)  ......................................35
PICkit 1 Flash Starter Kit (DV164101) ....................................35
PICkit 2 Microcontroller Programmer (PG164120)  .................40
PICkit 2 Starter Kit (DV164120) ..............................................40
PICSTART Plus Development Programmer 
(DV003001) ............................................................34
PICSTART Plus Development Programmer Flash 
Reprogrammable Firmware 
Upgrade (UK003010)  .............................................34
PICSTART Plus Programmer
18-Pin DIP to 28-Pin QFN Adapter (AC164033)  ............34
28-Pin DIP to 28-Pin QFN Adapter (AC164031)  ............34
40-Pin DIP to 44-Pin QFN Adapter (AC164034)  ............34
68-Pin PLCC Adapter Kit for PIC16C92X and 
PIC17C75X (AC164024)  ................................34
84-Pin PLCC Adapter Kit for PIC17C76X 
(AC164027) ....................................................34
8-Pin DFN to 8-Pin DIP Adapter (AC164032)  ................34
rfPIC Development Kit 1 (DV164102) .....................................36
rfPIC Receiver Module - 315 MHz (AC164104) ......................36
rfPIC Receiver Module - 433.92 MHz (AC164103) .................36
rfPIC Receiver Module - 5 Pack/315 MHz (AC164106) ..........36
rfPIC Receiver Module - 5 Pack/433.92 MHz 
(AC164105) ............................................................36
rfPIC Transmitter Module - 315 MHz (AC164102) ..................36
rfPIC Transmitter Module - 433.92 MHz (AC164101) .............36
Signal Analysis PICtail Daughter Board
PICkit 1 Flash Starter Firmware 
Upgrade Kit (UK164101)  ................................38
Signal Analysis PICtail Daughter Board 
(AC164120) ............................................................38
K
KEELOQ Security ICs Evaluation Kit
KEELOQ Security ICs Evaluation Kit II (DM303006) ................98

© 2005 Microchip Technology Inc. DS30177T-page 143
Index
P
PICmicro MCU Demo Boards and Kits
Low-Power Solutions Demonstration Board 
(DM163026) ........................................................... 67
PICDEM 1 Demonstration Board (DM163001)  ...................... 52
PICDEM 17 Demonstration Board (DM173001)  .................... 52
PICDEM 18R Demonstration Kit (DM163006)  ....................... 55
PICDEM 2 Plus Demonstration Board (DM163022)  .............. 53
PICDEM 3 Demonstration Board (DM163003)  ...................... 52
PICDEM 4 Demonstration Board (DM163014)  ...................... 54
PICDEM CAN-LIN 1 Demonstration Board 
(DM163007) ........................................................... 64
PICDEM CAN-LIN 2 Demonstration Board 
(DM163011) ........................................................... 64
PICDEM CAN-LIN 3 Demonstration Board 
(DM163015) ........................................................... 64
PICDEM FS USB Demonstration Board 
(DM163025) ........................................................... 61
PICDEM HPC Explorer Board (DM183022) ........................... 59
PICDEM LCD Demonstration Board (DM163028)  ................. 62
PICDEM LIN Demonstration Kit (DM163005)  ........................ 65
PICDEM MC Development Board (DM183011) ..................... 57
PICDEM MC LV Development Board (DM183021)  ............... 58
PICDEM Mechatronics Demonstration Kit 
(DM163029) ........................................................... 56
PICDEM USB Demonstration Kit (DM163010)  ...................... 60
PICDEM Z 2.4 GHz Demonstration Kit (DM163027-2)  .......... 63
PICDEM Z 2.4 GHz RF Card (AC163027-2) .......................... 63
PICDEM Z Motherboard (AC163027-1)  ................................. 63
PICDEM.net Demonstration/Evaluation Board 
(DM163004-LT) ...................................................... 66
Programmer Systems
28-Pin QFN Adapter Kit for 18-Pin ZIF Socket 
(AC164033) ............................................................ 50
28-Pin QFN Adapter Kit for 40-Pin ZIF Socket 
(AC164031) ............................................................ 50
44-Pin QFN Adapter Kit (AC164034)  ..................................... 50
68-Pin PLCC Adapter Kit (AC164024)  ................................... 50
6-Pin SOT-23/8P DIP Programmer Adapter 
(AC163020) ............................................................ 50
84-Pin PLCC Adapter Kit (AC164027)  ................................... 50
8-Pin DFN Adapter Kit (AC164032)  ....................................... 50
ICSP Socket Module (AC004004) .......................................... 49
MPLAB PM3 ICSP Cable (AC002021)  .................................. 50
MPLAB PM3 Universal Device Programmer 
(DV007004) ............................................................ 48
PRO MATE II Device Programmer Elastomeric 
Connectors (AC004005)  ........................................ 50
PRO MATE II Device programmer to MPLAB PM3 
Socket Module Adapter (AC164350)  ..................... 48
S
Software Tools
CMX-RTX for dsPIC30F Devices (SW300031) ...................... 24
CMX-Scheduler for dsPIC DSC Devices (SW300030)  .......... 25
CMX-Tiny+ for dsPIC30F Devices (SW300032) .................... 26
Digital Filter Design (SW300001) ........................................... 22
Digital Filter Design Lite (SW300001-LT) ............................... 22
dsPIC DSC Asymmetric Key Embedded Encryption 
Library Software License - 25K to 
100K Units (SW300055-100K) ............................... 19
dsPIC DSC Asymmetric Key Embedded Encryption 
Library Software License - 5K to 
25K Units (SW300055-25K)  ...................................19
dsPIC DSC Asymmetric Key Embedded Encryption 
Library Software License - Evaluation Copy 
(SW300055-EVAL) .................................................19
dsPIC DSC Asymmetric Key Embedded Encryption 
Library Software License - Up to 
5K Units (SW300055-5K)  .......................................19
dsPIC DSC Symmetric Key Embedded Encryption 
Library Software License - 25K to 
100K Units (SW300050-100K)  ...............................18
dsPIC DSC Symmetric Key Embedded Encryption 
Library Software License - 5K to 
25K Units (SW300050-25K)  ...................................18
dsPIC DSC Symmetric Key Embedded Encryption 
Library Software License - Evaluation Copy 
(SW300050-EVAL) .................................................18
dsPIC DSC Symmetric Key Embedded Encryption 
Library Software License - Up to 
5K Units (SW300050-5K)  .......................................18
dsPIC30F Acoustic Echo Cancellation Library
Accessory Kit (AC300030)  .............................................17
dsPIC30F Acoustic Echo Cancellation Library 
Software License - 25K to 100K Units 
(SW300060-100K) ..................................................17
dsPIC30F Acoustic Echo Cancellation Library 
Software License - 5K to 25K Units 
(SW300060-25K) ....................................................17
dsPIC30F Acoustic Echo Cancellation Library 
Software License - Evaluation Copy 
(SW300060-EVAL) .................................................17
dsPIC30F Acoustic Echo Cancellation Library 
Software License - Up to 5K Units 
(SW300060-5K) ......................................................17
dsPIC30F DSP Library (SW300022)  ......................................11
dsPIC30F Math Library (SW300020) ......................................12
dsPIC30F Noise Suppression Library
Accessory Kit (AC300030)  .............................................16
dsPIC30F Noise Suppression Library Software License - 
25K to 100K Units (SW300040-100K) ....................16
dsPIC30F Noise Suppression Library Software License - 
5K to 25K Units (SW300040-25K) ..........................16
dsPIC30F Noise Suppression Library Software License - 
Evaluation Copy (SW300040-EVAL) ......................16
dsPIC30F Noise Suppression Library Software License - 
Up to 5K Units (SW300040-5K) ..............................16
dsPIC30F Peripheral Library (SW300021)  .............................13
dsPIC30F Speech Encoder/Decoder Library Software 
License - Evaluation Copy (SW300070-EVAL)  ......20
dsPIC30F Speech Encoder/Decoder Library Software 
License - Up to 100K Units (SW300070-100K) ......20
dsPIC30F Speech Encoder/Decoder Library Software 
License - Up to 25K Units (SW300070-25K)  ..........20
dsPIC30F Speech Encoder/Decoder Library Software 
License - Up to 5K Units (SW300070-5K)  ..............20
dsPIC30F Speech Recognition Library
Accessory Kit (AC300031)  .............................................15
dsPIC30F Speech Recognition Library Software 
License - 25K to 100K Units (SW300012) ..............15
dsPIC30F Speech Recognition Library Software 
License - 5K to 25K Units (SW300011) ..................15

Development Systems Ordering Guide
DS30177T-page 144 © 2005 Microchip Technology Inc.
dsPIC30F Speech Recognition Library Software 
License - Evaluation Copy 
(SW300010-EVAL) ................................................ 15
dsPIC30F Speech Recognition Library Software 
License - Up to 5K Units (SW300010)  ................... 15
dsPIC30F V.22bis Soft Modem Library (SW300002) ............. 14
dsPIC30F V.32bis Soft Modem Library Software 
License - 25K to 100K Units (SW300005)  ............. 14
dsPIC30F V.32bis Soft Modem Library Software 
License - 5K to 25K Units (SW300004)  ................. 14
dsPIC30F V.32bis Soft Modem Library Software License - 
Evaluation Copy (SW300003-EVAL)  ..................... 14
dsPIC30F V.32bis Soft Modem Library Software 
License - Up to 5K Units (SW300003)  ................... 14
dsPICworks Data Analysis and DSP Software 
(SW300023) ........................................................... 21
FilterLab Active Filter Software Design Tool  .......................... 27
KEELOQ Security ICs License CD (DS40038)  ........................ 29
MPLAB C18 C Compiler (SW006011)  ..................................... 9
MPLAB C30 C Compiler (SW006012)  ................................... 10
MPLAB IDE (SW007002) ......................................................... 6
Total Endurance Software Model ........................................... 28

Index

NOTES:

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://support.microchip.com

Web Address:

www.microchip.com

Atlanta

Alpharetta, GA

Tel: 770-640-0034

Fax: 770-640-0307

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

Kokomo

Kokomo, IN

Tel: 765-864-8360

Fax: 765-864-8387

Los Angeles

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

San Jose

Mountain View, CA

Tel: 650-215-1444

Fax: 650-961-0286

Toronto

Mississauga, Ontario,

Canada

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8528-2100

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8676-6200

Fax: 86-28-8676-6599

China - Fuzhou

Tel: 86-591-8750-3506

Fax: 86-591-8750-3521

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

China - Shunde

Tel: 86-757-2839-5507

Fax: 86-757-2839-5571

China - Qingdao

Tel: 86-532-502-7355

Fax: 86-532-502-7205

ASIA/PACIFIC

India - Bangalore

Tel: 91-80-2229-0061

Fax: 91-80-2229-0062

India - New Delhi

Tel: 91-11-5160-8631

Fax: 91-11-5160-8632

Japan - Kanagawa

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Penang

Tel:011-604-646-8870

Fax:011-604-646-5086

Philippines - Manila

Tel: 011-632-634-9065

Fax: 011-632-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Kaohsiung

Tel: 886-7-536-4818

Fax: 886-7-536-4803

Taiwan - Taipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Taiwan - Hsinchu

Tel: 886-3-572-9526

Fax: 886-3-572-6459

EUROPE

Austria - Weis

Tel: 43-7242-2244-399

Fax: 43-7242-2244-393

Denmark - Ballerup

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Massy

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Ismaning

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

England - Berkshire

Tel: 44-118-921-5869

Fax: 44-118-921-5820

WORLDWIDE SALES AND SERVICE

04/20/05

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Microchip:

ACICE0207 ACICE0201 ACICE0203 AC002021 AC163020 ACICE0403 ACICE0106 AC162061 AC164033

AC163001