PRODUCT FAMILY DATA SHEET
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS61 REV 8
Cree® XLamp® XM-L2 LEDs
PRODUCT DESCRIPTION
The XLamp® XM-L2 LED builds on the unprecedented
performance of the original XM-L, increasing lumen output up
to 20% while providing a single die LED point source for precise
optical control. The XM-L2 LED shares the same mechanical
and optical footprint as the original XM-L, providing a seamless
upgrade path and shortened design cycle.
XLamp XM-L2 LEDs are the ideal choice for lighting applications
where high light output and maximum efcacy are required, such
as LED light bulbs, outdoor lighting, portable lighting, indoor
lighting and solar-powered lighting.
FEATURES
• Available in white, 70-CRI white, 80-CRI white, 85-CRI white
and 90-CRI white
• ANSI-compatible chromaticity bins
• Binned at 85°C
• Maximum drive current: 3000mA
• Low thermal resistance: 2.5°C/W
• Wide viewing angle: 125°
• Unlimited oor life at
≤ 30ºC/85% RH
• Reow solderable - JEDEC J-STD-020C
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component (E349212)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
2
XLAMP® XM-L2 LED
TABLE OF CONTENTS
Characteristics ...................................................................................................................................................................................................... 3
Flux Characteristics .............................................................................................................................................................................................. 4
Relative Spectral Power Distribution ................................................................................................................................................................. 11
Relative Flux vs. Junction Temperature ............................................................................................................................................................. 11
Electrical Characteristics ....................................................................................................................................................................................12
Relative Flux vs. Current ..................................................................................................................................................................................... 12
Relative Chromaticity vs. Current (Warm White) .............................................................................................................................................. 13
Relative Chromaticity vs. Temperature (Warm White) ...................................................................................................................................... 13
Typical Spatial Distribution ................................................................................................................................................................................. 14
Thermal Design ................................................................................................................................................................................................... 14
Performance Groups – Luminous Flux.............................................................................................................................................................. 15
Performance Groups – Chromaticity .................................................................................................................................................................15
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve ........................................................................................................... 19
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions ........................................................................................ 21
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions ................................................................. 22
Cree’s Standard Chromaticity Kits ..................................................................................................................................................................... 24
Bin and Order Code Formats ..............................................................................................................................................................................25
Reow Soldering Characteristics .......................................................................................................................................................................26
Notes ................................................................................................................................................................................................................... 27
Mechanical Dimensions ..................................................................................................................................................................................... 29
Tape and Reel ...................................................................................................................................................................................................... 30
Packaging ............................................................................................................................................................................................................ 31
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
3
XLAMP® XM-L2 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 2.5
Viewing angle (FWHM) degrees 125
Temperature coefcient of voltage mV/°C -1.4
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 3000
Reverse voltage V -5
Forward voltage (@ 700mA, 85°C) V 2.77 3.15
Forward voltage (@ 1500mA, 85°C) V 2.92
Forward voltage (@ 3000mA, 85°C) V 3.18
LED junction temperature °C 150
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
4
XLAMP® XM-L2 LED
FLUX CHARACTERISTICS (TJ = 85°C)
The following tables provide order codes for XLamp XM-L2 LEDs. For a complete description of the order-code nomenclature, please
consult the Bin and Orer Code Formats section (page 25).
Chromaticity Minimum Luminous Flux (lm) @
700 mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 65 CRI Typical 85 CRI Minimum
ANSI Cool White (5000 K – 8300 K)
51 6200 K
U3 320 364 439 618 776 XMLBWT-00-0000-0000U3051
U2 300 342 412 580 728 XMLBWT-00-0000-0000U2051
T6 280 318 385 541 679 XMLBWT-00-0000-0000T6051
T5 260 296 357 502 631 XMLBWT-00-0000-0000T5051
T4 240 273 330 464 582 XMLBWT-00-0000-000PT4051
T3 220 250 302 425 534 XMLBWT-00-0000-000PT3051
T2 200 227 275 386 485 XMLBWT-00-0000-000PT2051
53 6000 K
U3 320 364 439 618 776 XMLBWT-00-0000-0000U3053
U2 300 342 412 580 728 XMLBWT-00-0000-0000U2053
T6 280 318 385 541 679 XMLBWT-00-0000-0000T6053
T5 260 296 357 502 631 XMLBWT-00-0000-0000T5053
T4 240 273 330 464 582 XMLBWT-00-0000-000PT4053
T3 220 250 302 425 534 XMLBWT-00-0000-000PT3053
T2 200 227 275 386 485 XMLBWT-00-0000-000PT2053
50 6200 K
U3 320 364 439 618 776 XMLBWT-00-0000-0000U3050
U2 300 342 412 580 728 XMLBWT-00-0000-0000U2050
T6 280 318 385 541 679 XMLBWT-00-0000-0000T6050
T5 260 296 357 502 631 XMLBWT-00-0000-0000T5050
T4 240 273 330 464 582 XMLBWT-00-0000-000PT4050
T3 220 250 302 425 534 XMLBWT-00-0000-000PT3050
T2 200 227 275 386 485 XMLBWT-00-0000-000PT2050
E1 6500 K
U3 320 364 439 618 776 XMLBWT-00-0000-0000U30E1
U2 300 342 412 580 728 XMLBWT-00-0000-0000U20E1
T6 280 318 385 541 679 XMLBWT-00-0000-0000T60E1
T5 260 296 357 502 631 XMLBWT-00-0000-0000T50E1
T4 240 273 330 464 582 XMLBWT-00-0000-000PT40E1
T3 220 250 302 425 534 XMLBWT-00-0000-000PT30E1
T2 200 227 275 386 485 XMLBWT-00-0000-000PT20E1
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
5
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700 mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 65 CRI Typical 85 CRI Minimum
ANSI Cool White (5000 K – 8300 K)
E2 5700 K
U3 320 364 439 618 776 XMLBWT-00-0000-0000U30E2
U2 300 342 412 580 728 XMLBWT-00-0000-0000U20E2
T6 280 318 385 541 679 XMLBWT-00-0000-0000T60E2
T5 260 296 357 502 631 XMLBWT-00-0000-0000T50E2
T4 240 273 330 464 582 XMLBWT-00-0000-000PT40E2
T3 220 250 302 425 534 XMLBWT-00-0000-000PT30E2
T2 200 227 275 386 485 XMLBWT-00-0000-000PT20E2
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
6
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 70 CRI Minimum 75 CRI Typical 80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3 5000 K
U3 320 364 439 618 776 XMLBWT-00-0000-
000BU30E3
U2 300 342 412 580 728 XMLBWT-00-0000-
000BU20E3
XMLBWT-00-0000-
000LU20E3
T6 280 318 385 541 679 XMLBWT-00-0000-
000BT60E3
XMLBWT-00-0000-
000LT60E3
T5 260 296 357 502 631 XMLBWT-00-0000-
000BT50E3
XMLBWT-00-0000-
000LT50E3
T4 240 273 330 464 582 XMLBWT-00-0000-
000LT40E3
F4 4750 K
U3 320 364 439 618 776 XMLBWT-00-0000-
000BU30F4
U2 300 342 412 580 728 XMLBWT-00-0000-
000BU20F4
XMLBWT-00-0000-
000LU20F4
T6 280 318 385 541 679 XMLBWT-00-0000-
000BT60F4
XMLBWT-00-0000-
000LT60F4
T5 260 296 357 502 631 XMLBWT-00-0000-
000BT50F4
XMLBWT-00-0000-
000LT50F4
T4 240 273 330 464 582 XMLBWT-00-0000-
000LT40F4
E4 4500 K
U3 320 364 439 618 776 XMLBWT-00-0000-
000BU30E4
U2 300 342 412 580 728 XMLBWT-00-0000-
000BU20E4
XMLBWT-00-0000-
000LU20E4
T6 280 318 385 541 679 XMLBWT-00-0000-
000BT60E4
XMLBWT-00-0000-
000LT60E4
T5 260 296 357 502 631 XMLBWT-00-0000-
000BT50E4
XMLBWT-00-0000-
000LT50E4
T4 240 273 330 464 582 XMLBWT-00-0000-
000LT40E4
F5 4250 K
U2 300 342 412 580 728 XMLBWT-00-0000-
000BU20F5
T6 280 318 385 541 679 XMLBWT-00-0000-
000BT60F5
XMLBWT-00-0000-
000LT60F5
T5 260 296 357 502 631 XMLBWT-00-0000-
000BT50F5
XMLBWT-00-0000-
000LT50F5
T4 240 273 330 464 582 XMLBWT-00-0000-
000BT40F5
XMLBWT-00-0000-
000LT40F5
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
7
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 70 CRI Minimum 75 CRI Typical 80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E5 4000 K
U2 300 342 412 580 728 XMLBWT-00-0000-
000BU20E5
T6 280 318 385 541 679 XMLBWT-00-0000-
000BT60E5
XMLBWT-00-0000-
000LT60E5
XMLBWT-00-0000-
000HT60E5
T5 260 296 357 502 631 XMLBWT-00-0000-
000BT50E5
XMLBWT-00-0000-
000LT50E5
XMLBWT-00-0000-
000HT50E5
T4 240 273 330 464 582 XMLBWT-00-0000-
000BT40E5
XMLBWT-00-0000-
000LT40E5
XMLBWT-00-0000-
000HT40E5
T3 220 250 302 425 534 XMLBWT-00-0000-
000LT30E5
XMLBWT-00-0000-
000HT30E5
Z5 4000 K
T5 260 296 357 502 631 XMLBWT-00-0000-
000LT50Z5
XMLBWT-00-0000-
000HT50Z5
T4 240 273 330 464 582 XMLBWT-00-0000-
000LT40Z5
XMLBWT-00-0000-
000HT40Z5
T3 220 250 302 425 534 XMLBWT-00-0000-
000LT30Z5
XMLBWT-00-0000-
000HT30Z5
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
8
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700 mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F6 3750 K
T6 280 318 385 541 679 XMLBWT-00-
0000-000LT60F6
XMLBWT-00-
0000-000HT60F6
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50F6
XMLBWT-00-
0000-000HT50F6
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40F6
XMLBWT-00-
0000-000HT40F6
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30F6
XMLBWT-00-
0000-000HT30F6
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20F6
XMLBWT-00-
0000-000HT20F6
E6 3500 K
T6 280 318 385 541 679 XMLBWT-00-
0000-000LT60E6
XMLBWT-00-
0000-000HT60E6
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50E6
XMLBWT-00-
0000-000HT50E6
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40E6
XMLBWT-00-
0000-000HT40E6
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30E6
XMLBWT-00-
0000-000HT30E6
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20E6
XMLBWT-00-
0000-000HT20E6
Z6 3500 K
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50Z6
XMLBWT-00-
0000-000HT50Z6
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40Z6
XMLBWT-00-
0000-000HT40Z6
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30Z6
XMLBWT-00-
0000-000HT30Z6
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20Z6
XMLBWT-00-
0000-000HT20Z6
F7 3250 K
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50F7
XMLBWT-00-
0000-000HT50F7
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40F7
XMLBWT-00-
0000-000HT40F7
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30F7
XMLBWT-00-
0000-000HT30F7
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20F7
XMLBWT-00-
0000-000HT20F7
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
9
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700 mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E7 3000 K
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50E7
XMLBWT-00-
0000-000HT50E7
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40E7
XMLBWT-00-
0000-000HT40E7
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30E7
XMLBWT-00-
0000-000HT30E7
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20E7
XMLBWT-00-
0000-000HT20E7
XMLBWT-00-
0000-000PT20E7
XMLBWT-00-
0000-000UT20E7
S6 182 207 250 352 442 XMLBWT-00-
0000-000PS60E7
XMLBWT-00-
0000-000US60E7
S5 172 196 236 332 417 XMLBWT-00-
0000-000PS50E7
XMLBWT-00-
0000-000US50E7
S4 164 186 225 317 398 XMLBWT-00-
0000-000PS40E7
XMLBWT-00-
0000-000US40E7
Z7 3000 K
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40Z7
XMLBWT-00-
0000-000HT40Z7
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30Z7
XMLBWT-00-
0000-000HT30Z7
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20Z7
XMLBWT-00-
0000-000HT20Z7
S6 182 207 250 352 442 XMLBWT-00-
0000-000PS60Z7
XMLBWT-00-
0000-000US60Z7
S5 172 196 236 332 417 XMLBWT-00-
0000-000PS50Z7
XMLBWT-00-
0000-000US50Z7
S4 164 186 225 317 398 XMLBWT-00-
0000-000PS40Z7
XMLBWT-00-
0000-000US40Z7
F8 2850 K
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50F8
XMLBWT-00-
0000-000HT50F8
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40F8
XMLBWT-00-
0000-000HT40F8
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30F8
XMLBWT-00-
0000-000LT30F8
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20F8
XMLBWT-00-
0000-000HT20F8
S6 182 207 250 352 442 XMLBWT-00-
0000-000LS60F8
XMLBWT-00-
0000-000HS60F8
XMLBWT-00-
0000-000PS60F8
XMLBWT-00-
0000-000US60F8
S5 172 196 236 332 417 XMLBWT-00-
0000-000PS50F8
XMLBWT-00-
0000-000US50F8
S4 164 186 225 317 398 XMLBWT-00-
0000-000PS40F8
XMLBWT-00-
0000-000US40F8
S3 156 170 214 302 381 XMLBWT-00-
0000-000PS30F8
XMLBWT-00-
0000-000US30F8
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 27).
• Cree XLamp XM-L2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65. • Minimum CRI for 70-CRI White is 70.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75. • Minimum CRI for 80-CRI White is 80.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80. • Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values are for reference only.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
10
XLAMP® XM-L2 LED
Chromaticity Minimum Luminous Flux (lm) @
700 mA*
Calculated Minimum Luminous Flux
(lm) @ 85°C** Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 1000 mA 1500 mA 2000 mA 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E8 2700 K
T5 260 296 357 502 631 XMLBWT-00-
0000-000LT50E8
XMLBWT-00-
0000-000HT50E8
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40E8
XMLBWT-00-
0000-000HT40E8
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30E8
XMLBWT-00-
0000-000HT30E8
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20E8
XMLBWT-00-
0000-000HT20E8
S6 182 207 250 352 442 XMLBWT-00-
0000-000LS60E8
XMLBWT-00-
0000-000HS60E8
XMLBWT-00-
0000-000PS60E8
XMLBWT-00-
0000-000US60E8
S5 172 196 236 332 417 XMLBWT-00-
0000-000PS50E8
XMLBWT-00-
0000-000US50E8
S4 164 186 225 317 398 XMLBWT-00-
0000-000PS40E8
XMLBWT-00-
0000-000US40E8
S3 156 170 214 302 381 XMLBWT-00-
0000-000PS30E8
XMLBWT-00-
0000-000US30E8
Z8 2700 K
T4 240 273 330 464 582 XMLBWT-00-
0000-000LT40Z8
XMLBWT-00-
0000-000HT40Z8
T3 220 250 302 425 534 XMLBWT-00-
0000-000LT30Z8
XMLBWT-00-
0000-000HT30Z8
T2 200 227 275 386 485 XMLBWT-00-
0000-000LT20Z8
XMLBWT-00-
0000-000HT20Z8
S6 182 207 250 352 442 XMLBWT-00-
0000-000LS60Z8
XMLBWT-00-
0000-000HS60Z8
S5 172 196 236 332 417 XMLBWT-00-
0000-000PS50Z8
XMLBWT-00-
0000-000US50Z8
S4 164 186 225 317 398 XMLBWT-00-
0000-000PS40Z8
XMLBWT-00-
0000-000US40Z8
S3 156 170 214 302 381 XMLBWT-00-
0000-000PS30Z8
XMLBWT-00-
0000-000US30Z8
FLUX CHARACTERISTICS (TJ = 85°C) - CONTINUED
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLAMP® XM-L2 LED
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLAMP® XM-L2 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF=700mA)
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
12
XLAMP® XM-L2 LED
ELECTRICAL CHARACTERISTICS (TJ = 85°C)
RELATIVE FLUX VS. CURRENT (TJ = 85°C)
Electrical Characteristics (Tj = 85°C) after Vf change
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
2.6 2.7 2.8 2.9 3.0 3.1 3.2
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85°C)
0%
50%
100%
150%
200%
250%
300%
350%
0200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Relative Luminous Flux
Forward Current (mA)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
13
XLAMP® XM-L2 LED
RELATIVE CHROMATICITY VS. CURRENT (WARM WHITE)
RELATIVE CHROMATICITY VS. TEMPERATURE (WARM WHITE)
Relative Chromaticity Vs. Current, WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0500 1000 1500 2000 2500 3000
Current (mA)
ΔCCx
ΔCCy
Relative Chromaticity Vs. Temperature WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
14
XLAMP® XM-L2 LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Thermal Design after temp coeff change
0
500
1000
1500
2000
2500
3000
3500
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 4°C/W
Rj-a = 7°C/W
Rj-a = 10°C/W
Rj-a = 15°C/W
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
15
XLAMP® XM-L2 LED
PERFORMANCE GROUPS – LUMINOUS FLUX
XLamp XM-L2 LEDs are tested for luminous ux and placed into one of the following luminous-ux groups:
Group Code Minimum Luminous Flux
@ 700 mA (lm)
Maximum Luminous Flux
@ 700 mA (lm)
S3 156 164
S4 164 172
S5 172 182
S6 182 200
T2 200 220
T3 220 240
T4 240 260
T5 260 280
T6 280 300
U2 300 320
U3 320 340
U4 340 360
U5 360 380
PERFORMANCE GROUPS – CHROMATICITY
Region x y Region x y Region x y Region x y
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
16
XLAMP® XM-L2 LED
Region x y Region x y Region x y Region x y
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3C
0.3463 0.3687
3D
0.3451 0.3554
0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620
0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487
0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427
3R
0.3366 0.3369
3S
0.3381 0.3762
3T
0.3480 0.3840
3U
0.3440 0.3428
0.3440 0.3428 0.3480 0.3840 0.3571 0.3907 0.3515 0.3487
0.3429 0.3307 0.3463 0.3687 0.3551 0.3760 0.3495 0.3339
0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
4R
0.3512 0.3465
4S
0.3571 0.3907
4T
0.3668 0.3957
4U
0.3590 0.3521
0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578
0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440
0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
17
XLAMP® XM-L2 LED
Region x y Region x y Region x y Region x y
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.353
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
18
XLAMP® XM-L2 LED
Region x y Region x y Region x y Region x y
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
Neutral White
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
3R
3S
3T
3U
4R
4S
4T
4U
5R
5S
5T
5U
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
6R
6S
6T
6U
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
CCy
CCx
ANSI
C78.377A
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
19
XLAMP® XM-L2 LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D46A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D48A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D28D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
20
XLAMP® XM-L2 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
53
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
21
XLAMP® XM-L2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
E3
E4
E5
E6
E8
E7
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
22
XLAMP® XM-L2 LED
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
23
XLAMP® XM-L2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Z6
Z7
Z5
Z8
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
24
XLAMP® XM-L2 LED
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color CCT Kit Chromaticity Bins
Cool
White
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
Neutral
White
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4500 K E4 4A, 4B, 4C, 4D
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K Z5 5A3, 5B4, 5C1, 5D2
Warm
White
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K Z6 6A3, 6B4, 6C1, 6D2
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K Z7 7A3, 7B4, 7C1, 7D2
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K Z8 8A3, 8B4, 8C1, 8D2
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
25
XLAMP® XM-L2 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes for XM-L2 LEDs are congured in the following manner:
Order Code Bin Code
SSSSCC-BD-HHHH-NNNGFFWWW
Series
XMLB = XM-L Gen 2
Internal code
Luminous flux group
Chromaticity group
Color specification
L = W hite
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Internal code
Color
WT = White
SSSSCC-B-WWW-FFF-GG-AAAA
Series
XMLB = XM-L Gen 2
Internal code
Luminous flux group
Color specification
L = White
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Internal code
Chromaticity group
Color
WT = White
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
26
XLAMP® XM-L2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XM-L2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
27
XLAMP® XM-L2 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
28
XLAMP® XM-L2 LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
29
XLAMP® XM-L2 LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
Top View Bottom View
Side View
Recommended PCB Solder Pad Recommended Stencil Pattern
(Shaded Area Is Open)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.26
3.02
0.73
.50
3.78
2.78
4.78
4.78
.50
4.78
.80
.50
.25
.80
.25
.97
4.78
.50
.50
2.78
4.78
4.78
1/116.000
B
2610-00032
OUTLINE DRAWING, 5050 XMLB
--
--
----
----
11/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
30
XLAMP® XM-L2 LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTANED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
SURFACE FINISH:
63
330
+.25
-.75
12.4
+1.0
-.5
MEASURED AT EDGE
16.4
+0.2
.0
MEASURED AT HUB
12.4
+.2
.0
MEASURED AT HUB
±.213.1
1.9±.4
±.421
60° 60°
1/10.500
A
2400-00009
REEL, 13" X 12MM, 3 PIECE SNAP
-
ANTI-STATIC HIPS
----
----
09/29/09D. CRONIN
2400-00009
INDEX QTY ITEM COMMENTS
1 1 2400-00009-CORE
2 2 2400-00009-REEL
REVISONS
REV DESCRIPTION BY DATE APP'D
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(1000 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(40 empty pockets min.)
12
1.75
4
83.35
1/13.000
B
2402-00012
XM LOADING SPEC
--
--
----
----
06/08/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A Loaded pocket count was 750 DDS 11/8/10 BS
B MADE CATHODE AND ANODE NOTE LARGER DC 2/26/12
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
31
XLAMP® XM-L2 LED
PACKAGING
Label with Cree Bin
Code, Qty, Lot # Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel