HARTING Ha-VIS eCon Switches
The Ha-VIS eCon 2000 Fast Ethernet family of unmanaged Ethernet
switches is equipped with up to 16 Fast Ethernet ports and allow for cost-
efficient and quick expansion and/or reconstruction of network
infrastructures. Due to the extremely flat design, these switches can be
accommodated in installations where space is restricted towards the cable
connection at the front.
The selection includes various combinations of variants with RJ45 and fibre
optic ports. Automatic detection of the transmission rate (auto-negotiation)
and of the wiring of the twisted pair data cable (autopolarity and auto-
MDI(X)) allow for simple plug & play. All variants are available with the
temperature ranges „Industrial“ and „Commercial“.
General description
Technical characteristics
Target markets
Machinery &
Robotics Automation technology Industrial Network
Infrastructure
Windenergy,
Solar Energy Transportation Shipbuilding
■Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3
■Variants with industrial temperature range of -40°C ... +70 °C
■Wide range voltage supply 24/48 VDC
■Surge protection and reverse polarity protection
■Minimum energy consumption due to Energy-Efficient Ethernet
3 to 16 Ethernet ports RJ45 and SC
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial Temp.: 0 °C ... +55 °C / Industrial Temp.: -40 °C ... +70 °C
Energy
Efficient
Ethernet
Switch Features
Enclosure width 46.5 mm 60 mm 120 mm 120 mm
Number of ports 3, 4, 5 8 7, 8 16
Switching technology Store and Forward
Supported standards IEEE 802.3
Frame Size 1552 bytes 2 kbytes
MAC table size 1k entries 8 k entries
Packet buffer size 448 kbit 2 Mbit
Non-blocking Yes
Quality of service Yes
Energy-Efficient
Ethernet Yes
PROFINET compatible Yes
EthernetIP compatible Yes
Ethernet Ports 10BASE-Te / 100BASE-TX EEE
Connection type RJ45
Auto-negotiation Yes
Auto-polarity Yes
Auto-MDI(X) Yes
Transfer conditions Twisted Pair
Transfer speed 10 / 100 Mbit/s
Transfer length 100 m (twisted pair, Cat 5)
Ethernet Ports 100BASE-FX
Type of fibre Multimode (MM) Singlemode (SM)
Connection type SC Duplex
Transfer conditions FO
Wavelength 1310 nm
Transfer speed 100 Mbit/s
Transfer length 2 km 15 km
Output power -19 dBm ... -14 dBm -15 dBm ... -8 dBm
Input sensitivity ≤ -32 dBm ≤ -34 dBm
Current supply
Nominal voltage 24 VDC 48 VDC
Permissible voltage range 9 VDC ... 60 VDC
Surge protection Yes
Reverse polarity proof Yes
Starting current 2.80 A 5.60 A
Overcurrent protection at input Yes (2/4 A)
Max. power consumption @ 24 VDC 0.77 W ... 3.1 W
Cross-section / Wire gauge 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
Connection type 3-pole, pluggable screwed contact
Pinout + / - /
Supply circuit (according to 60950) SELV (circuit breaker 10 A)
Ambient conditions
Commercial temperature range 0 °C ... +55 °C
Industrial temperature range -40 °C ... +70 °C
Storage temperature range -40 °C ... +85 °C
Relative humidity (operation) 0 % ... 95 % (not-condensing)
Relative humidity
(storage and transport) 0 % ... 95 % (not-condensing)
Air pressure 2000 m (795 hPa)
Ha-VIS eCon 2000
Fast Ethernet Basic
HARTING Technology Group
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
ICPN-Service@harting.com | Service hotline: +49 5772 47-9479
Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior notication. The HARTING Technologiegruppe does not accept
any responsibility for possible errors or incompletions in this document. We reserve all the rights to
this document and the topics and illustrations contained within it. Copying, disclosure to third parties
or use of its content - even partially - is forbidden without the prior written consent of the HARTING
Technologiegruppe.
Approvals
CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT
ECE - Approval mark (E1): see table technical characteristics
EMC and environmental conditions
EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024)
Electrostatic discharge (ESD) EN 61 000-4-2
Electromagnetic field EN 61 000-4-3
Rapid transients (burst) EN 61 000-4-4
Surge voltages EN 61 000-4-5
Conducted interference voltages EN 61 000-4-6
EMC Interference emission (EN 61000-6-4, EN 55 032,
FCC CFR 47 Part 15)
Mechanical stability (EN 60721-3)
IEC 60068-2-6 Vibration
IEC 60068-2-6 Vibration resonance search
IEC 60068-2-27 Shock test
Included in delivery
■Pluggable screw contact for voltage supply
■ Assembly instruction
Status and diagnostic displays
Power („Pwr“) lights up green Supply voltage is applied
Link/Activity („L/A“) off No link
Link/Activity („L/A“) lights up green Link is active
Link/Activity („L/A“) flashes green Link is active and data is transferred
Link speed („Spd“) off 10 Mbit/s
Link speed („Spd“) lights up yellow 100 Mbit/s
Enclosures
Enclosures width 46.5 mm 60 mm 120 mm
Dimensions H x W x D
(without pluggable
screw contact)
113.5 mm x
46.5 mm x
27.3 mm
113.5 mm x
60 mm x
27.3 mm
113.5 mm x
120 mm x
27.3 mm
Weight 162 g ... 170 g 217 g 372 g ... 390 g
Type of installation 35 mm DIN rail acc. to EN 60 715
Material enclosures Anodised aluminium
Protection degree
(withplugged screw
contact)
IP30
Protection class III
Technical characteristics / order information
Drawings
Ports / order information
Commercial Temp.: 0 °C ... +55 °C Industrial Temp.: -40 °C ... +70 °C
RJ45 SFP SC Enclosures
width
Current con-
sumption
@ 24 VDC
MTBF
in Mio. h Switch Part no. Switch Part no.
3 - - 46.5 mm 32 mA 3.13 Ha-VIS eCon 2030B-A 24 02 003 00101Ha-VIS eCon 2030BT-A 24 02 003 00001
4 - - 46.5 mm 37 mA 2.99 Ha-VIS eCon 2040B-A 24 02 004 00101Ha-VIS eCon 2040BT-A 24 02 004 00001
5 - - 46.5 mm 42 mA 2.86 Ha-VIS eCon 2050B-A 24 02 005 00101Ha-VIS eCon 2050BT-A 24 02 005 00001
6 - 1x MM (2 km) 120 mm 94 mA 1.24 Ha-VIS eCon 2061B-AD 24 02 006 1110 Ha-VIS eCon 2061BT-AD 24 02 006 1100
6 - 1x SM (15 km) 120 mm 81 mA 1.26 Ha-VIS eCon 2061B-AF 24 02 006 1210 Ha-VIS eCon 2061BT-AF 24 02 006 1200
6 - 2x MM (2 km) 120 mm 129 mA 1.20 Ha-VIS eCon 2062B-AD 24 02 006 2110 Ha-VIS eCon 2062BT-AD 24 02 006 2100
6 - 2x SM (15 km) 120 mm 113 mA 1.23 Ha-VIS eCon 2062B-AF 24 02 006 2210 Ha-VIS eCon 2062BT-AF 24 02 006 2200
8 - - 60 mm 58 mA 2.53 Ha-VIS eCon 2080B-A 24 02 008 00101Ha-VIS eCon 2080BT-A 24 02 008 00001
16 - - 120 mm 93 mA 1.75 Ha-VIS eCon 2160B-A 24 02 016 0010 Ha-VIS eCon 2160BT-A 24 02 016 0000
1 E1 Approval
Date of issue 06.2018
ICPN Datasheet 0834/04
Copyright© 2014
HARTING Technology Group
All rights reserved
