Series PVT422PbF Microelectronic Power IC HEXFET(R) Power MOSFET Photovoltaic Relay Dual Pole, Normally Open, 0-400V, 120mA AC /DC General Description The PVT422 Series Photovoltaic Relay is a dualpole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier's HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. Features HEXFET Power MOSFET output Bounce-free operation 4,000 VRMS I/O isolation Linear AC/DC operation Solid-State Reliability UL recognized and BABT certified Series PVT422 Relays are packaged in an 8-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information opposite. Applications On/Off Hook switch Dial-Out relay Ring injection relay General switching Part Identification PVT422PbF thru-hole PVT422SPbF surface-mount PVT422S-TPbF surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com (c) 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVT422PbF Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (See figure1) Maximum Control Current for Off-State Resistance @TA=+25C Control Current Range (Caution: current limit input LED, see figure 5) 2.0 0.4 2.0 to 25 mA mA mA 6.0 V Maximum Reverse Voltage OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load Current @ TA=+40C 5mA Control (See figure 1) (single and dual channel operation) Maximum Peak Load Current (10ms maximum duration) (single and dual channel operation) Maximum On-State Resistance @TA=+25C For 50mA Pulsed load, 5mA Control (see figure3) Maximum Off-State Leakage @TA=+25C, 320V (see figure 4) Maximum Turn-On Time @TA=+25C (see figure 6) For 50mA, 100 VDC load, 5mA Control Maximum Turn-Off Time @TA=+25C (see figure 6) For 50mA, 100 VDC load, 5mA Control Maximum Output Capacitance @ 50VDC GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Dielectric Strength, Pole-to-Pole Minimum Insulation Resistance, Input-Output, @TA=+25C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com (c) 2015 International Rectifier Limits Units 0 to 400 V(DC or AC peak) 120 mA 350 mA 35 1.0 2.0 A ms 2.0 ms 12 pF Limits Units 4000 1000 V RMS V DC 1012 1.0 +260 -40 to +85 -40 to +100 pF C Connection Diagram Submit Datasheet Feedback June 02, 2015 Series PVT422PbF 3 Figure 1. Typical Current Derating Curve Figure 2. Linearity Characteristics Figure 3. Typical Normalized On-Resistance Figure 4. Typical Normalized Off-State Leakage www.irf.com (c) 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVT422PbF Figure 5. Input Characteristics (Current Controlled) Figure 6. Typical Delay Times Figure 7. Delay Time Definitions Figure 8. Typical Output Capacitance 4 www.irf.com (c) 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVT422PbF Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 5 www.irf.com (c) 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVT422PbF Qualification information Qualification level Moisture Sensitivity Level RoHS compliant Industrial (per JEDEC JESD47I guidelines) PVT422PbF N/A PVT422SPbF MSL4 PVT422S-TPbF (per JEDEC J-STD-020E & JEDEC J-STD-033C ) Yes Qualification standards can be found at International Rectifier's web site: http://www.irf.com/product-info/reliability Applicable version of JEDEC standard at the time of product release Revision History Date 6/2/2015 Comments * Added Qualification Information Table on page 6 * Updated data sheet with new IR corporate template IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com (c) 2015 International Rectifier Submit Datasheet Feedback June 02, 2015