166
BradyID.com
IP and PR Plus Print Ribbons on page 134.
Full Material Properties on page 227.
Circuit Board
Circuit Board Materials
THT Label Materials
B-719 Electrostatic Dissipative Polyimide Material
Color: White Finish: Matte
High temperature, low profile white polyimide material (1 mil) with a permanent static
dissipative adhesive and static dissipative release liner. Similar to B-718, but with a matte
topcoat, which prevents solder balls from sticking after molten wave solder exposure. Surface
resistivity values in the recommended range for Dissipative ESD packaging materials. Also
meets requirements of EIA-541 “Packaging Material Standards for ESD Sensitive Items.”
Performance Attributes:
Figure 1
A C
E
DB
E
A
DB
Figure 2
Diagram Catalog # Material Color
Label Width A
Inch (mm)
Label Height B
Inch (mm)
Horiz. Repeat C
Inch (mm)
Vert. Repeat D
Inch (mm)
Web Width E
Inch (mm)
Labels
Per Row
Labels
Per Pkg
Rec.
Ribbon
Fig. 1 THT-70-719-20 Polyimide White 0.250 (6.4) 0.250 (6.4) 0.320 (8.1) 0.350 (8.9) 2.370 (60.2) 720,000 R6000
Fig. 1 THT-71-719-20 Polyimide White 0.315 (8.0) 0.315 (8.0) 0.375 (9.5) 0.415 (10.5) 2.390 (60.7) 620,000 R6000
Fig. 1 THT-38-719-10 Polyimide White 0.375 (9.5) 0.375 (9.5) 0.437 (11.1) 0.475 (12.1) 3.200 (81.3) 710,000 R6002, R4702
Fig. 1 THT-12-719-10 Polyimide White 0.500 (12.7) 0.437 (11.1) 0.662 (16.8) 0.537 (13.6) 3.350 (85.1) 510,000 R6007, R4707
Fig. 2 THT-99-719-10 Polyimide White 0.500 (12.7) 0.500 (12.7) -0.600 (15.2) 0.700 (17.8) 110,000 R6011
Fig. 1 THT-14-719-10 Polyimide White 0.650 (16.5) 0.200 (5.1) 0.700 (17.8) 0.300 (7.6) 2.950 (74.9) 410,000 R6002, R4702
Fig. 2 THT-47-719-10 Polyimide White 0.650 (16.5) 0.200 (5.1) -0.300 (7.6) 0.850 (21.6) 110,000 R6011
Fig. 1 THT-1-719-10 Polyimide White 0.750 (19.1) 0.250 (6.4) 0.800 (20.3) 0.350 (8.9) 3.350 (85.1) 410,000 R6007, R4707
Fig. 2 THT-46-719-10 Polyimide White 0.750 (19.1) 0.250 (6.4) -0.350 (8.9) 0.950 (24.1) 110,000 R6006, R4706
Fig. 1 THT-2-719-10 Polyimide White 0.900 (22.9) 0.250 (6.4) 1.125 (28.6) 0.350 (8.9) 3.350 (85.1) 310,000 R6007, R4707
Fig. 2 THT-49-719-10 Polyimide White 0.900 (22.9) 0.250 (6.4) -0.350 (8.9) 1.100 (27.9) 110,000 R6006, R4706
Fig. 2 THT-103-719-10 Polyimide White 1.000 (25.4) 0.250 (6.4) -0.350 (8.9) 1.200 (30.5) 110,000 R6006, R4706
Fig. 1 THT-3-719-10 Polyimide White 1.000 (25.4) 0.375 (9.5) 1.075 (27.3) 0.475 (12.1) 3.350 (85.1) 310,000 R6007, R4707
Fig. 2 THT-42-719-10 Polyimide White 1.000 (25.4) 0.187 (4.8) -0.287 (6.9) 1.200 (30.5) 110,000 R6006, R4706
Fig. 1 THT-5-719-10 Polyimide White 1.000 (25.4) 0.500 (12.7) 1.075 (27.3) 0.600 (15.2) 3.350 (85.1) 310,000 R6007, R4707
Fig. 2 THT-58-719-10 Polyimide White 1.000 (25.4) 0.375 (9.5) -0.475 (12.1) 1.200 (30.5) 110,000 R6006, R4706
Fig. 2 THT-59-719-10 Polyimide White 1.000 (25.4) 0.500 (12.7) -0.600 (15.2) 1.200 (30.5) 110,000 R6006, R4706
Fig. 1 THT-29-719-10 Polyimide White 1.250 (31.8) 0.375 (9.5) 1.300 (33.0) 0.475 (12.1) 2.750 (69.9) 210,000 R6002, R4702
Fig. 2 THT-43-719-10 Polyimide White 1.250 (31.8) 0.250 (6.4) -0.350 (8.9) 1.450 (36.8) 110,000 R6006, R4706
Fig. 2 THT-45-719-10 Polyimide White 1.500 (38.1) 0.250 (6.4) -0.350 (8.9) 1.700 (43.2) 110,000 R6000
Fig. 2 THT-60-719-10 Polyimide White 1.500 (38.1) 0.125 (3.2) -0.225 (5.7) 1.700 (43.2) 110,000 R6000
Fig. 2 THT-48-719-10 Polyimide White 2.000 (50.8) 0.250 (6.4) -0.350 (8.9) 2.200 (55.9) 110,000 R6000
Did You Know? Electrostatic Dissipative (ESD) Labels
Brady’s electrostatic dissipative labels, or ESD labels, meet the
requirements of ANSI/ESD S20.20 standard. ESD labels are
designed to protect the static-sensitive components of your
circuit boards. since when labels are peeled off of their unique
ESD liner, they produce only low static discharge voltage.
Available in a variety of types and sizes, Brady’s ESD labels can
help you reduce damages from static discharge, and keep your
product cost down.
