Axial Leaded Precision Resistors Type HOLCO Series Key Features I Ultra Precision Down To 0.05% I Matched Sets Available To 2ppm/C I High Pulse Withstand I Low Reactance I Low TCR - Down To 5ppm/C I Long Term Stability I Up To 1 Watt At 70C I Released To CECC 40101 004, 030 And 804 The Holco range of Precision Metal Film Resistors meets the requirement for economically priced components for industrial and military applications. The manufacturing facility utilises closely controlled production processes including the sputter coating of metal alloy films to ceramic substrates, and laser spiralling to achieve close tolerance and high stability resistors. An epoxy coating is applied for environmental and mechanical protection. Commercially the Series is available in two case sizes, from 1 ohm to 4M ohms, tolerances from 0.05% to 1% and TCR's from 5ppm/C to 100ppm/C. Offered with release to BS CECC 40101 004, 030 and 804 the H8 is available via distribution. Characteristics - Electrical H4P H4 H8 BS CECC 40101 004 Style: Power Rating at 70C: K H J 0.25W 0.063W 0.125W Temperature Rise (max): 32C 14C 28C Limiting Element Voltage: 250V 200V 200V BS CECC 40101 030 Style: Power Rating at 125C: J H 0.125W 0.1W Temperature Rise (max): 30C 30C Limiting Element Voltage: 250V 200V BS CECC 40101 804 Style: B A Power Rating at 125C: 0.25W 0.125W Limiting Element Voltage: 250V 200V 0.25W Commercial Ratings Power Rating at 70C: 1.0W 0.5W Temperature Rise: 70C 55C 40C Limiting Element Voltage: 500V 350V 350V General Data 1773230 CIS BI 06/2011 Lead Material: Solderability to BS CECC 40101 004 Para 4.15.1 Encapsulation: Conformal Epoxy Coating Resistor Marking: Legend printed in accordance with CECC 40000 Para 2.4 Solvent Resistance: The epoxy coating and print will withstand the action of all commonly used industrial cleansing solvents Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Axial Leaded Precision Resistors Type HOLCO Series Temperature Coefficient / Tolerance Ranges TCR H4P ppm/C 0.05% H4 0.1%-0.25% 0.5%-1.0% 0.05% H8 0.1%-0.25% 0.5%-1.0% 0.05% 0.1%-0.25% 0.5%-1.0% 5 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 15 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 25 10R-1M0 10R-2M0 10R-2M0 10R-1M0 10R-2M0 10R-2M0 10R-1M0 10R-2M0 10R-2M0 50 10R-1M0 10R-2M0 10R-4M0 10R-1M0 10R-2M0 10R-4M0 10R-1M0 10R-2M0 10R-4M0 100 10R-1M0 1R0-2M0 1R0-4M0 10R-1M0 1R0-2M0 1R0-4M0 10R-1M0 1R0-2M0 1R0-4M0 Approved Value Ranges 40101-004, 40101-030 Type Style 004 Style 030 Z 100ppm C 50ppm D 25ppm Y 15ppm H4 K J 10R-1M0 49R9-1M0 49R9-1M0 49R9-1M0 H8 HJ H 10R-1M0 49R9-1M0 49R9-1M0 49R9-1M0 Tolerances 0.1%, 0.25%, 0.5%, 1% 40101-804 Type Style C 50ppm D 25ppm T 15ppm H4 B 49R9-1M0 49R9-1M0 49R9-1M0 H8 A 49R9-1M0 49R9-1M0 49R9-1M0 Tolerances 0.1%, 0.25%, 0.5%, 1% Characteristics - Electrical 1773230 CIS BI 06/2011 Typical Data Reference Voltage Coefficient of Resistance (Between 10% and Full Rated Voltage) Less Than 5ppm/Volt Applied n/a Insulation Resistance at 500 Volts Greater Than 1012 Ohms n/a Resistance to Soldering Heat (260C for 10 Secs.) Less Than 0.05% BS CECC 40101 004 Para 4.15.2 Short Term Overload (6.25 Times Rated BS CECC Wattage for 5 Seconds) Less Than 0.06% BS CECC 40101 004 Para 4.11 Ambient Temperature Range -55C to +155C BS CECC 40101 004, BS CECC 40101 030 & Commercial Rapid Change of Temperature (-55C to +155C, 5 cycles) Less Than 0.04% BS CECC 40101 004 Para 4.16 Shelf Life (at Normal Room Temp.) Less Than 0.05% Per Annum n/a Vibration (10-500 HZ,Amplitude 0.75mm, or Acceleration 98m/s2 which is less severe, sweep duration 6 hours) Less Than 0.04% BS CECC 40101 004 Para 4.19 Vibration (55-2000 Hz Simple Harmonic Motion, Max.Acceleration 98m/s2, Duration 355 Minutes) Less Than 0.04% MIL STD 202 METHOD 204-C Bump (390m/s2, 4000 Bumps) Less Than 0.03% BS 2011 Part 2.1 Eb 1977 (1984) Load Stability See Graphs n/a Damp Heat Steady State See Graph BS CECC 40101 004 Para 4.21 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Axial Leaded Precision Resistors Type HOLCO Series Dimensions To prevent damage to the components conformal coating, the leads should be adequately supported during the forming process H4P H4 H8 Body Length (L) maximum: 10.0 mm 10.0 mm 7.20 mm Body Diameter (D) maximum: 3.70 mm 3.70 mm 2.50 mm Lead Diameter (d) maximum: 0.60 mm 0.60 mm 0.60 mm Lead Length (l) nominal: 30.0 mm 30.0 mm 30.0 mm Recommended Mounting Pitch: 12.7 mm 12.7 mm 10.2 mm 40 40 24 Weight (g/100 resistors) Characteristics Long Term Stability 1773230 CIS BI 06/2011 Long Term Stability BS CECC 40101 004 Ratings at 70C H4 - 0.25 W H8 - 0.125 W Long Term Stability BS CECC 40101 030 Ratings at 125C H4 - 0.125 W H8 - 0.1 W Long Term Stability Commercial Ratings at 125C H4P - 1W H4 - 0.5 W H8 - 0.25 W Damp Heat Steady State 93% RH at 40C Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Axial Leaded Precision Resistors Type HOLCO Series Derating Graph Approved and Commercial Ratings How to Order H8 100R B Y B Common Part Resistance Value Tolerance T.C.R. Code Release H4P 1.0 ohm (1000 milli ohms) 1R0 A - 0.05% H4 10 ohm (10 ohms) 10R H8 100 ohm (100 ohms) 100R A - 5ppm B - 10ppm B - 0.1% Y - 15ppm C - 0.25% 1K 0hm (1000 ohms) 1K0 10K ohm (10000 ohms) 10K 100K ohm (100000 ohms) 100K 1M ohm (1000000 ohms) 1M0 D - 25ppm D - 0.5% C - 50ppm F - 1.0% Z - 100ppm A - Part can only be sold with Commercial or C of C release. B - Part can be sold to BS CECC 40101 004, BS CECC 40101 030 D - Part can be sold to BS CECC 40101 804 TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: H897R6BZA