Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company TO-220 Plastic Package 2N6486, 2N6487, 2N6488 2N6489, 2N6490, 2N6491 2N6486, 6487, 6488 2N6489, 6490, 6491 NPN PLASTIC POWER TRANSISTORS PNP PLASTIC POWER TRANSISTORS General Purpose Amplifier and Switching Applications PIN CONFIGURATION 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 4 1 2 B C E A O 3 K All diminsions in mm. L N 1 2 O H F J D G M DIM MIN . A B C D E F G H J K L M N O 14.42 9.63 3.56 3 MAX. 16.51 10.67 4.83 0.90 1.15 1.40 3.75 3.88 2.29 2.79 2.54 3.43 0.56 12.70 14.73 2.80 4.07 2.03 2.92 31.24 DEG 7 ABSOLUTE MAXIMUM RATINGS Collector-base voltage (open emitter) Collector-emitter voltage (open base) Collector current Total power dissipation up to TC = 25C Junction temperature Collector-emitter saturation voltage IC = 5 A; IB = 0.5 A D.C. current gain IC = 5 A; VCE = 4 V VCBO VCEO IC Ptot Tj 6486 6487 6488 6489 6490 6491 max. 50 70 90 max. 40 60 80 max. 15 max. 75 max. 150 V V A W C VCEsat max. 1.3 V hFE min. max. 20 150 RATINGS (at TA=25C unless otherwise specified) Limiting values Collector-base voltage (open emitter) Collector-emitter voltage (open base) Emitter-base voltage (open collector) Continental Device India Limited VCBO VCEO VEBO Data Sheet 6486 6487 6488 6489 6490 6491 max. 50 70 90 max. 40 60 80 max. 5.0 V V V Page 1 of 3 2N6486, 2N6487, 2N6488 2N6489, 2N6490, 2N6491 Collector current Base current Total power dissipation up to TC = 25C Derate above 25C Total power dissipation up to TA = 25C Derate above 25C Junction temperature Storage temperature IC IB P tot Tj T stg THERMAL RESISTANCE From junction to ambient From junction to case R th j-a R th j-c P tot max. max. max. max. max. max. max. CHARACTERISTICS Tamb = 25C unless otherwise specified Collector cutoff current IB = 0; VCE = 20 V IB = 0; VCE = 30 V IB = 0; VCE = 40 V VEB(off) = 1.5 V; VCE = 45 V VEB(off) = 1.5 V; VCE = 65 V VEB(off) = 1.5 V; VCE = 85 V VEB(off) = 1.5 V; VCE = 40 V; VEB(off) = 1.5 V; VCE = 60 V; VEB(off) = 1.5 V; VCE = 80 V; Emitter cut-off current IC = 0; VEB = 5 V Breakdown voltages IC = 200 mA; IB = 0 IC = 1 mA; IE = 0 IC = 200 mA; VBE = 1.5 V IE = 1 mA; IC = 0 Saturation voltages IC = 5 A; IB = 0.5 A IC = 15 A; IB = 5 A Base-emitter on voltage IC = 5 A; VCE = 4 V IC = 15 A; VCE = 4 V D.C. current gain IC = 5 A; VCE = 4 V A A W W/C W W/C C C 70 1.67 C/W C/W 6486 6487 6488 6489 6490 6491 ICEO ICEO ICEO ICEX ICEX ICEX TC=150C ICEX TC=150C ICEX TC=150C ICEX IC = 15 A; VCE = 4 V Transition frequency IC = 1 A; VCE = 4 V; f = 1 MHz Small signal current gain IC = 1.0A; VCE = 4V; f = 1.0 KHz 15 5.0 75 0.6 1.8 0.014 150 -65 to +150 max. 1.0 max. - max. - max. 500 max. - max. - max. 5.0 max. - max. - - 1.0 - - 500 - - 5.0 - - - 1.0 - - 500 - - 5.0 mA mA mA A A A mA mA mA IEBO max. 1.0 VCEO(sus)* VCBO VCEX(sus)* VEBO min. 40 min. 50 min. 50 min. 60 70 70 5.0 VCEsat* VCEsat* max. max. 1.3 3.5 V V VBE(on)* VBE(on)* max. max. 1.3 3.5 V V hFE* min. max. 20 150 hFE* min. 5.0 fT(1) min. 5.0 hfe min. 25 mA 80 90 90 V V V V MHz * Pulse test: pulse width 300 s; duty cycle 2% (1) fT = |hfe|* ftest Continental Device India Limited Data Sheet Page 2 of 3 Notes Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/ CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-579 5290, 5141 1119 email@cdil.com www.cdilsemi.com Continental Device India Limited Data Sheet Page 3 of 3