Series 801 Series 801 Mighty Mouse Double-Start ACME Thread Receptacle with PC Tails or Solder Cups 801-011 and 801-033 Ordering Information Environmental, PCB Receptacle 800-012 connectors feature low profile shells for minimum protrusion inside enclosures and integral board standoffs. Contacts are non-removable. Specify 800-011 connectors for applications where open face water immersion is not a requirement. Water Tight PCB Receptacle 800-033 connectors are identical to 801-011 but are specially sealed ("MOD-518") and 100% tested to maintain a helium leak rate of less than 1 x 10-4 cc/ second at one atmosphere pressure differential. Connectors meet MIL-STD-810 Method 512G immersion requirements in unmated/open face condition. How To Order Sample Part Number 801-011 Series 801-011 = Receptacle for Solder Cup or PCB Termination, with Standard Epoxy 801-033 = Receptacle for Solder Cup or PCB Termination, Meets MIL-STD-810 Method 512G for Water Immersion Shell Style (See Table I) -02 = Square Flange, Front or Rear Panel Mount -12 = Square Flange, Rear Panel Mount with Non-Locking Clinch Nuts -22 = Square Flange, Rear Panel Mount with Locking Clinch Nuts -07 = Jam-Nut, Rear Panel Mount Material and Finish M = Aluminum / Electroless Nickel RoHS Compliant MT = Aluminum / Nickel-PTFE RoHS Compliant NF = Aluminum / Cadmium with Olive Drab Chromate ZNU = Aluminum / Zinc-Nickel with Black Chromate Z1 = Stainless Steel / Passivated RoHS Compliant Shell Size - Insert Arrangement See Contact Arrangements page D-3 Contact Type E = Pin, Solder Cup F = Socket, Solder Cup Polarization (See Table II) A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F A B Style -02, -12, -22 Square Flange Style -07 Jam-Nut Position A B C D E F M 6-7 P A D P = Pin, PC Tail S = Socket, PC Tail Table II: Keyway Positions Table I: Shell Style -02 A 150 75 95 140 75 95 B 210 210 230 275 275 210 NOTES 1. Contacts are non removable, the connector is back potted 2. For additional insert arrangements consult factory 3. Plug mates with all quick coupling high density receptacle connectors with same polarization and opposite contact gender (801-001, 801-002, 801007, 801-008) 4. For all insert arrangements with size #8 contacts, dimension changes to .160" 5. For all insert arrangements with size #8 contacts, add .300" to overall length Dimensions in Inches (millimeters) are subject to change without notice. (c) 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-23 Rev. Rev. 05.23.19 06.19.18 E-Mail: sales@glenair.com Series 801 Series 801 Mighty Mouse Double-Start ACME Thread Receptacle with PC Tails or Solder Cups 801-011 and 801-033 Dimensions Jam-nut mount receptacle - shell style 07 .260 (6.60) MAX .060 (1.5) .125 (3.18) MIN PC TAIL PC Tail Dimensions D .100 (2.54) MAX PANEL THICKNESS MASTER KEYWAY Jam-Nut 801-011-07 Contact Size #23 #20 #16 #12 .925 (23.5) MAX OS O .018/.022 O .028/.024 O .060/.064 O .092/.096 F FLAT 12 7 16 oD 3 1 4 8 S 13 17 19 K THREAD E FLAT 2 PL oT oM .025 L THREAD RED FULL MATE INDICATOR BAND Square flange mount receptacle - shell style 02 .760 (19.3) MAX .260 (6.60) MAX .060 (1.5) .125 (3.18) MIN PC TAIL REF B BSC TYP oC Square Flange 801-011-02 PC Tail Dimensions Contact Size #23 #20 #16 #12 OS O .018/.022 O .028/.024 O .060/.064 O .092/.096 A SQ TYP 12 1 3 7 4 8 4X .025 HEIGHT 4X .080 WIDTH K THD 4x o J THRU .005 OT M S 13 17 16 19 RED FULL MATE INDICATOR BAND M Square flange mount receptacle - shell style 12 and 22 B BSC TYP Square Flange 801-011-12 and -22 MASTER KEYWAY .760 (19.30) MAX .260 (6.60) .125 (3.18) MIN PC TAIL (REF) oU PC Tail Dimensions Contact Size #23 #20 #16 #12 OS O .018/.022 O .028/.024 O .060/.064 O .092/.096 V SQ TYP 4X W CLINCH NUT S K THREAD RED FULL MATE INDICATOR BAND OT M SOLDER CUP (REF) 4X .025 (.64) HEIGHT 4X .080 (2.03) WIDTH X .095 (2.41) MAX TYP CLINCH NUT Dimensions in Inches (millimeters) are subject to change without notice. (c) 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-24 Rev. 05.23.19 E-Mail: sales@glenair.com Series 801 Series 801 Mighty Mouse Double-Start ACME Thread Receptacle with PC Tails or Solder Cups 801-011 and 801-033 Dimensions Dimensions Shell Size 5 6 7 8 9 10 11 13 16 17 19 21 A Sq .530 (13.46) .590 (14.99) .650 (16.51) .712 (18.08) .850 (21.59) .890 (22.61) .935 (23.75) 1.030 (26.16) 1.219 (3.96) 1.280 (32.51) 1.432 (36.37) 1.565 (39.75) B Bsc OC .363 (9.22) .680 (17.27) .423 (1.74) .750 (19.05) .483 (12.27) .850 (21.59) .545 (13.84) .938 (23.83) .607 (15.42) 1.125 (28.58) .670 (17.02) 1.188 (3.18) .715 (18.16) 1.250 (31.75) .812 (2.62) 1.375 (34.92) .981 (24.92) 1.625 (41.28) 1.060 (26.92) 1.700 (43.18) 1.191 (3.25) 1.900 (48.26) 1.322 (33.58) 2.100 (53.34) OD E Flat F Flat J Holes K Threead L Thread .575 (14.60) .635 (16.13) .755 (19.18) .755 (19.18) .830 (21.08) .890 (22.61) .960 (24.38) 1.078 (27.38) 1.265 (32.13) 1.325 (33.65) 1.450 (36.83) 1.625 (41.28) .545 (13.84) .595 (15.11) .723 (18.36) .723 (18.36) .790 (2.07) .855 (21.72) .925 (23.50) 1.044 (26.52) 1.230 (31.24) 1.290 (32.77) 1.415 (35.94) 1.577 (4.06) .350 (8.89) .410 (1.41) .536 (13.61) .536 (13.61) .596 (15.14) .658 (16.71) .718 (18.24) .845 (21.46) 1.022 (25.96) 1.096 (27.84) 1.225 (31.12) 1.345 (34.16) .096 (2.44) .091 (2.31) .3125-.05P-.1L-2A .3750-.05P-.1L-2A .4375-.05P-.1L-2A .5000-.05P-.1L-2A .5625-.05P-.1L-2A .6250-.05P-.1L-2A .6875-.05P-.1L-2A .8125-.1P-.2L-2A 1.0000-.1P-.2L-2A 1.0625-.1P-.2L-2A 1.1875-.1P-.2L-2A 1.3125-.1P-.2L-2A .3750-28 UN-2A .4375-28 UNEF-2A .5625-32 UN-2A .5625-32 UN-2A .6250-28 UN-2A .6875-28 UN-2A .7500-28 UN-2A .8750-28 UN-2A 1.0625-20 UN-2A 1.1250-28 UN-2A 1.2500-28 UN-2A 1.3750-28 UN-2A .130 (3.30) .126 (3.11) Dimensions (Continued) Shell Size L Thread OM OT 5 6 7 8 9 10 11 13 16 17 19 21 .3750-28 UN-2A .4375-28 UNEF-2A .5625-32 UN-2A .5625-32 UN-2A .6250-28 UN-2A .6875-28 UN-2A .7500-28 UN-2A .8750-28 UN-2A 1.0625-20 UN-2A 1.1250-28 UN-2A 1.2500-28 UN-2A 1.3750-28 UN-2A .244 (6.20) .330 (8.38) .432 (10.97) .493 (12.52) .551 (14.00) .620 (15.75) .662 (16.81) .703 (17.86) .863 (21.92) .912 (23.16) 1.018 (25.86) 1.170 (29.72) .175 (4.44) .238 (6.05) .327 (8.31) .388 (9.86) .446 (11.33) .516 (13.11) .557 (14.15) .599 (15.21) .759 (19.28) .808 (20.52) .910 (23.11) 1.061 (26.95) N Flat .002 (0.05) .356 (9.04) .416 (10.57) .542 (13.77) .542 (13.77) .602 (15.29) .666 (16.92) .730 (18.54) .851 (21.62) 1.028 (26.11) 1.102 (27.99) 1.243 (31.57) 1.354 (34.39) OP +.005 (+.13) -.000 (-.00) .380 (9.65) .443 (11.25) .567 (14.40) .567 (14.40) .630 (16.00) .693 (17.60) .755 (19.18) .880 (22.35) 1.067 (27.10) 1.130 (28.70) 1.255 (31.88) 1.380 (35.05) OR .005 (.13) OU V Sq .328 (8.33) .390 (9.91) .453 (11.51) .515 (13.08) .578 (14.68) .640 (16.26) .703 (17.86) .828 (21.03) 1.015 (25.78) 1.078 (27.38) 1.203 (30.56) 1.328 (33.73) .774 (19.66) .860 (21.84) .944 (23.98) 1.032 (26.21) 1.180 (29.97) 1.268 (32.21) 1.331 (33.81) 1.470 (37.34) 1.708 (43.38) 1.822 (46.28) 2.006 (50.95) 2.190 (55.63) .623 (15.82) .683 (17.35) .743 (18.87) .805 (20.45) .927 (23.55) .990 (25.15) 1.035 (26.29) 1.132 (28.75) 1.301 (33.05) 1.382 (35.10) 1.511 (38.38) 1.642 (41.71) Series 801 Recommended Panel Cutouts OR 4X o J oP oB BSC N FLAT 801-033 and 801-011 -02 SQUARE FLANGE -12 & 22 SQUARE FLANGE W Clinch Nuts X 2-56 .030 (.76) 4-40 .060 (1.52) Material / finish: * Shell, jam-nut: aluminum alloy or CRES; see How to Order Table * Insulator: high grade rigid dielectric / N.A. * Interfacial seal, O-rings: fluorosilicone / N.A. * Contact: copper alloy / gold plate per ASTM B 488, Type II, Code C, Class 1.25, over a suitable underplate * Potting compound: epoxy 801-033 -07 JAM NUT Dimensions in Inches (millimeters) are subject to change without notice. (c) 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-25 Rev. 05.23.19 E-Mail: sales@glenair.com D