SBH0203R
No. A0914-1/4
Features
•Supports automatic mounting and permits SBH0203R applied sets to be made smaller.
•Low forward voltage (VF max=0.5V).
•Average output current : IO=0.2A.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Peak Reverse Voltage VRM 30 V
Average Output Current IO0.2 A
Surge Forward Current IFSM 60Hz sine wave, 1cycle 1 A
Junction Temperature Tj 125 °C
Storage Temperature Tstg --40 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Forward Voltage VFIF=0.2A 0.5 V
Reverse Current IRVR=10V 30 µA
Marking : C
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENA0914
90507RS TI IM TC-00000856
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
'
s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'
s products or
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
SANYO Semiconductors
DATA SHEET
SBH0203R Schottky Barrier Diode
30V, 0.2A Rectifier
SBH0203R
No. A0914-2/4
Package Dimensions
unit : mm (typ)
7810-001
0.3 Cathode mark
0.3 0.6
0.8
0.12
1.2
1.6
PF -- IO
IF -- VF
IO -- Ta
IR -- VR
Forward Power Dissipation, PF -- W
Average Output Current, IO -- A
Average Output Current, IO -- A
Forward Voltage, VF -- V
Forward Current, IF -- mA
Reverse Voltage, VR -- V
Reverse Current, IR -- µA
Ambient Temperature, Ta -- °C
IT12810 IT12811
0 0.1 0.30.2 0.4 0.5
0
0.05
0.10
0.20
0.15
1.0
0.01
0.1
10
100
1000
0.001 0.01
1.0
0.1
10
100
1000
10000
100000
0 0.1 0.2 0.3 0.4 0.5
25
°
C
--25
°
C
75°C
75°C
25
°
C
--25
°
C
Ta=125°C
Ta=125
°
C
0.5
DC
SIN
IT12812
0 102030
0 25 75 10050 125
0
0.1
0.2
0.4
0.5
0.3
DC
0.5
IT12813
SIN
VR
T
0V
IO
0A
tD=t/T
VR=15V
Tj=125°C
SBH0203R
No. A0914-3/4
IFSM -- n
Surge Forward Current, IFSM -- A
Number of Cycles, n
IO -- Tc
Average Output Current, IO -- A
Case Temperature, Tc -- °C
C -- VR
Interterminal Capacitance, C -- pF
Reverse Voltage, VR -- V
IFSM -- t
Surge Forward Current, IFSM -- A
Time, t -- s
1.0 10
23 5 27100
357
IT12816
0
1
2
4
5
6
7
3
0 25 75 10050 125
0
0.1
0.2
0.4
0.5
0.3
DC
0.5
IT12814
SIN
VR
T
0V
IO
0A
tD=t/T
VR=15V
Tj=125°C
0510 15 20
2
3
5
2
7
10
3
1.0
IT12815
f=1MHz
1cyc
8.3ms8.3ms
IFSM Ta=25°C
0
1
2
3
4
6
8
5
7
9
10
IT12817
1.0 10
23 5 27100
357
t
IFSM
Rth(j-c) -- t
Transient Thermal Resistance, Rth -- °C / W
Time, t -- s
2
3
5
2
7
100
3
5
7
1000
10 23
0.001 0.01
57 23 0.1
57 23 1.0
57 23 10
57 23 100
57 23 1000
57
IT12840
Rth(j--a)
Rth(j--c)
Mounted on a glass epoxy board
SBH0203R
No. A0914-4/4
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
PS
This catalog provides information as of September, 2007. Specifications and information herein are subject
to change without notice.
