Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Series : HX (Guaranteed at 125 C) Features Endurance 125 C 1000 h voltage & Large capacitance (2 V.DC 560 F to 25 V.DC 33 F) Low ESR (4.5 m max.) RoHS compliance, Halogen free High Specifications Series Category temp. range Rated voltage range Category voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady state) HX -55 C to +125 C 2 V.DC to 2.5 V.DC, 10 V.DC to 25 V.DC 1.6 V.DC to 2 V.DC, 8 V.DC to 20 V.DC 15 F to 560 F 20 % (120 Hz/+20 C) 2 V.DC to 2.5 V.DC : I < 0.1 CV (A) 2 minutes, 10 V.DC to 25 V.DC : I < 0.3 CV (A) 2 minutes < 0.1 (120 Hz/+20 C) Rated voltage x 1.25 [2 V.DC to 16 V.DC], x 1.15 [20 V.DC to 25 V.DC](15 C to 35 C) +125 C, 1000 h, Category voltage applied Capacitance change Within 20 % of the initial value tan d < 2 times of the initial limit DC leakage current Within the initial limit After storing for 500 hours at +60 C, 90 % 2 V.DC to 2.5 V.DC 10 V.DC to 25 V.DC Capacitance change of initial measurd value +70 %, -20 % +60 %, -20 % tan d < 2 times of the initial limit 2 V.DC to 2.5 V.DC : Within the initial limit DC leakage current 10 V.DC to 25V DC : < 3 times of the initial limit Marking Dimensions (not to scale) - + H Cap. Polarity bar (Positive) P P Lot No. W1 W2 W2 L R.V. code Rated voltage mark d e A 2 V.DC 2.5 V.DC 10 V.DC Unit : mm C D E 16 V.DC 20 V.DC 25 V.DC Series HX L0.2 W10.2 W20.1 H0.1 7.3 4.3 2.4 1.9 P0.3 1.3 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2018 Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list Reflow 3 Series Rated voltage [105 C] (V.DC) Category Capacitance voltage (20 %) [125 C] (F) (V.DC) 470 2 1.6 560 330 2.5 2 470 HX 47 10 16 20 25 8 12.8 16 20 Case size (mm) Specification 1 L W H 7.3 4.3 1.9 7.3 4.3 1.9 2 Ripple ESR current (mAr.m.s.) (m max.) 5100 15 6300 9 Part number <Standard> Min.4 Packaging Q'ty (pcs) EEFHX0D471R 3500 EEFHX0D471R9 3500 7.3 4.3 1.9 7500 6 EEFHX0D471R6 3500 7.3 4.3 1.9 8500 4.5 EEFHX0D471R4 3500 7.3 4.3 1.9 5100 15 EEFHX0D561R 3500 7.3 4.3 1.9 8500 4.5 EEFHX0D561R4 3500 7.3 4.3 1.9 5100 15 EEFHX0E331R 3500 7.3 4.3 1.9 6300 9 EEFHX0E331R9 3500 7.3 4.3 1.9 7500 6 EEFHX0E331R6 3500 7.3 4.3 1.9 8500 4.5 EEFHX0E331R4 3500 7.3 4.3 1.9 5100 15 EEFHX0E471R 3500 7.3 4.3 1.9 6300 9 EEFHX0E471R9 3500 7.3 4.3 1.9 7500 6 EEFHX0E471R6 3500 7.3 4.3 1.9 8500 4.5 EEFHX0E471R4 3500 7.3 4.3 1.9 3200 40 EEFHX1A470R 3500 68 7.3 4.3 1.9 3200 40 EEFHX1A680R 3500 100 7.3 4.3 1.9 3200 40 EEFHX1A101R 3500 15 7.3 4.3 1.9 3200 40 EEFHX1C150R 3500 22 7.3 4.3 1.9 3200 40 EEFHX1C220R 3500 33 7.3 4.3 1.9 3200 40 EEFHX1C330R 3500 47 7.3 4.3 1.9 3200 40 EEFHX1C470R 3500 68 7.3 4.3 1.9 3200 40 EEFHX1C680R 3500 22 7.3 4.3 1.9 3200 40 EEFHX1D220R 3500 33 7.3 4.3 1.9 3200 40 EEFHX1D330R 3500 47 7.3 4.3 1.9 3200 40 EEFHX1D470R 3500 56 7.3 4.3 1.9 3200 40 EEFHX1D560R 3500 15 7.3 4.3 1.9 3200 40 EEFHX1E150R 3500 22 7.3 4.3 1.9 3200 40 EEFHX1E220R 3500 33 7.3 4.3 1.9 3200 40 EEFHX1E330R 3500 1: Ripple current (100 kHz/ +45C ), 2: ESR (100 kHz/+20 C) 3: Please refer to the page of "Mounting Specifications". 4: Please contact us when 500 pcs packing is necessary. Temperature compensation multipliers for ripple current Temp. 2 V.DC to 2.5 V.DC 10 V.DC to 25 V.DC Coefficient T < 45 C 45 C < T < 85 C 85 C < T < 105 C 105 C < T < 125 C 1.0 0.7 0.25 0.25 1.0 0.8 0.5 0.25 Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2018 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19