ATC General Purpose Capacitors Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ATC 001-847 Rev. I; 5/06 ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC ELECTRICAL CHARACTERISTICS CAPACITANCE RANGE: 0.5 pF to 0.10 F. TEMPERATURE CHARACTERISTIC: 0 30ppm/C. W L OPERATING TEMPERATURE RANGE: -55C to +125C. T (MAX.) DISSIPATION FACTOR: 0.1% (max.) @ + 25C, @1 MHz 1000 pF; @1 KHz >1000 pF MB INSULATION RESISTANCE @ + 25C and rated Vdc: 100,000 megohms (min.) or 1000 ohm-farads (min.), whichever is less. DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 1 seconds, 50 milliamps (max.). Unless otherwise specified all test data is at + 25C. Aging Rate Temperature Coefficient Voltage Coefficient of Capacitance Temperature (Celsius) Impedance vs. Frequency Minimum IR vs. Temperature Dissipation Factor vs. Frequency Temperature (Celsius) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1997 American Technical Ceramics. All Rights Reserved. A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com 2 w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC SIZE 0402 0504 0603 0805 1206 1210 1812 2225* Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .126 (3.20) .126 (3.20) .177 (4.50) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .098 (2.50) .126 (3.20) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .010 (0.25) .015 (0.38) .067 (1.70) .070 (1.78) T Max. Term. (MB) Min. Max. .025 (0.64) .044 (1.12) .035 (0.89) .004 .012 .005 .015 .005 .015 (.10) (.30) (.12) (.38) .051(1.30) (.12) (.38) .010 .028 .051 (1.30) (.25) (.71) .010 .028 .067 (1.70) (.25) (.71) .010 .028 (.25) (.71) .010 .030 (.25) .010 (.76) .030 (.25) (.76) 0R5 0R5 0R5 0R5 0R5 681 471 102 16V 271 182 102 103 153 273 393 104 25V 331 122 102 472 223 223 393 104 50V 221 102 102 332 103 223 333 104 100V 101 561 102 182 562 103 183 683 200V 680 391 271 122 392 822 123 473 500V 471 102 222 392 153 1000V 331 821 182 222 103 271 681 122 472 Min. Cap. Max. Cap. (code) & WVDC 10V 2000V 5000V Dimensions shown in inches (mm) * IR and Vapor Phase soldering only recommended. Higher voltages available upon request. PART NUMBER CODE 0603 NPO 1R 0 C T 2 A T Size Code Packaging: T=7" Reel, B=Bulk *R=13" Reel - *Special Order Temperature Characteristic Marking: A=No mark *S=EIA Code - *Special Order Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point CAPACITANCE TOLERANCE B* C Code Tol. 0.1 0.25 pF (Values < 10 pF) WVDC 7 1 2 3 4 5 6 9 8 10 16 25 50 100* 200* 500* 1000* 2000* 5000* *Special Order - Consult Factory G* 2 J 5 Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, (non-magnetic), RoHS Compliant** **Consult ATC for availability % (Values > 10 pF) *Tighter tolerances available. STANDARD EIA CAPACITANCE VALUES REFERENCE TABLE Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code 0R5 0.5 6R8 6.8 560 56 471 470 392 3900 273 1R0 1.0 8R2 8.2 680 68 561 560 472 4700 333 1R2 1.2 100 10 820 82 681 680 562 5600 393 1R5 1.5 120 12 101 100 821 820 682 6800 473 1R8 1.8 150 15 121 120 102 1000 822 8200 563 2R2 2.2 180 18 151 150 122 1200 Cap. Code Cap.F 683 103 .010 2R7 2.7 220 22 181 180 152 1500 823 123 .012 3R3 3.3 270 27 221 220 182 1800 104 153 .015 3R9 3.9 330 33 271 270 222 2200 124 183 .018 4R7 4.7 390 39 331 330 272 2700 154 223 .022 5R6 5.6 470 47 391 390 332 3300 184 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w . a t c e r a m i c Cap. Code Cap. F 224 .22 274 .27 334 .33 394 .39 474 .47 564 .56 684 .68 824 .82 105 1.0 125 1.2 155 1.5 Cap. Code Cap. F 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10.0 126 12.0 156 15.0 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Cap.F .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m 3 ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC ELECTRICAL CHARACTERISTICS CAPACITANCE RANGE: 220 pF to 2.2 F. TEMPERATURE CHARACTERISTIC: 15% with 0 Vdc applied. W L OPERATING TEMPERATURE RANGE: -55C to +125C. DISSIPATION FACTOR: 2.5% (max.) @ 25C, @1 MHz 1000 pF; @1 KHz >1000 pF T (MAX.) MB INSULATION RESISTANCE @ + 25C and rated Vdc: 100,000 megohms (min.) or 1000 ohm-farads (min.), whichever is less. DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 1 seconds, 50 milliamps (max.). AGING RATE: 1% (maximum) per decade. Unless otherwise specified all test data is at + 25C. Temperature Coefficient of Capacitance Dissipation Factor vs. Temperature Voltage Coefficient of Capacitance Temperature (Celsius) Temperature (Celsius) Minimum IR vs. Temperature Impedance vs. Frequency Temperature (Celsius) A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com 4 w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC SIZE 0402 0504 0603 0805 1206 1210 1812 2225* Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .126 (3.20) .126 (3.20) .177 (4.50) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .098 (2.50) .126 (3.20) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .010 (0.25) .015 (0.38) T Max. .025 (0.64) .044 (1.12) .035 (0.89) .051(1.30) .051 (1.30) .067 (1.70) .067 (1.70) .070 (1.78) .004 .012 .005 .015 .005 .015 Term. (MB) Min. Max. Min. Cap. Max. Cap. (code) & WVDC (.10) (.30) 121 (.12) (.38) 221 (.12) (.38) .010 .028 331 (.25) (.71) .010 .028 471 (.25) (.71) .010 .028 (.25) (.71) .010 .030 (.25) (.76) .010 .030 (.25) (.76) 102 102 122 183 475 10V 16V 104 393 224 335 334 684 125 225 25V 273 273 104 474 274 564 105 185 50V 103 273 104 224 474 105 225 335 100V 272 153 103 563 154 105 105 225 200V 182 103 682 333 823 184 334 105 500V 103 273 563 104 334 1000V 272 682 153 273 124 102 222 392 183 2000V 5000V * IR and Vapor Phase soldering only recommended. Dimensions shown in inches (mm) PART NUMBER CODE 0805 X7R 10 2 K T 2 A T Size Code Packaging: T=7" Reel, B=Bulk *R=13" Reel - *Special Order Temperature Characteristic Marking: A=No mark *S=EIA Code - *Special Order Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A Indicates number of zeros following digits of capacitance in picofarads WVDC 7 1 10 16 2 3 4 5 6 9 8 25 50 100* 200* 500* 1000* *2000 *5000 *Special Order - Consult Factory CAPACITANCE TOLERANCE *J K Code 5 10 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, (non-magnetic), RoHS Compliant** **Consult ATC for availability *Tighter tolerances available. STANDARD EIA CAPACITANCE VALUES REFERENCE TABLE Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code 0R5 0.5 6R8 6.8 560 56 471 470 392 3900 273 1R0 1.0 8R2 8.2 680 68 561 560 472 4700 333 1R2 1.2 100 10 820 82 681 680 562 5600 393 1R5 1.5 120 12 101 100 821 820 682 6800 473 1R8 1.8 150 15 121 120 102 1000 822 8200 563 2R2 2.2 180 18 151 150 122 1200 Cap. Code Cap.F 683 103 .010 2R7 2.7 220 22 181 180 152 1500 823 123 .012 3R3 3.3 270 27 221 220 182 1800 104 153 .015 3R9 3.9 330 33 271 270 222 2200 124 183 .018 4R7 4.7 390 39 331 330 272 2700 154 223 .022 5R6 5.6 470 47 391 390 332 3300 184 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w . a t c e r a m i c Cap. Code Cap. F 224 .22 274 .27 334 .33 394 .39 474 .47 564 .56 684 .68 824 .82 105 1.0 125 1.2 155 1.5 Cap. Code Cap. F 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10.0 126 12.0 156 15.0 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Cap.F .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m 5 ATC GENERAL PURPOSE CAPACITORS: Z5U DIELECTRIC ELECTRICAL CHARACTERISTICS CAPACITANCE RANGE: .01 F to 15 F. TEMPERATURE CHARACTERISTIC: +22%, -56% OPERATING TEMPERATURE RANGE: +10C to +85C. W L DISSIPATION FACTOR: 3.5% (max.) @ 25C, @ 1 KHz. T (MAX.) INSULATION RESISTANCE @ + 25C and rated Vdc: 100 ohm-farads (min.). MB DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 1 seconds, 50 milliamps (max.). AGING RATE: 3% (maximum) per decade. Unless otherwise specified all test data is at + 25C. Temperature Coefficient of Capacitance Dissipation Factor vs. Temperature Voltage Coefficient of Capacitance Temperature (Celsius) Temperature (Celsius) Minimum IR vs. Temperature Impedance vs. Frequency Temperature (Celsius) A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com 6 w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC GENERAL PURPOSE CAPACITORS: Z5U DIELECTRIC SIZE 0603 0805 1206 1210 1812 2225* Length (L) .063 (1.60) .079 (2.00) .126 (3.20) .126 (3.20) .177 (4.50) .220 (5.59) Width (W) .031 (0.80) .049 (1.25) .063 (1.60) .098 (2.50) .126 (3.20) .250 (6.35) Tol. L & W .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .010 (0.25) .015 (0.38) T Max. .035 (0.89) .051(1.30) .051 (1.30) .067 (1.70) .067 (1.70) .070 (1.78) Term. (MB) Min. Max. .005 .015 Min Cap Max. Cap. (code) & WVDC (.12) (.38) .010 .028 (.25) (.71) .010 .028 (.25) (.71) .010 .028 (.25) (.71) .010 .030 (.25) (.76) .010 .030 (.25) (.76) 562 103 223 333 154 105 16V 154 684 155 335 565 106 25V 104 474 125 225 475 106 50V 683 334 105 185 395 825 100V 273 124 274 564 125 225 200V 562 333 823 184 394 684 10V * IR and Vapor Phase soldering only recommended. Dimensions shown in inches (mm) PART NUMBER CODE 1206 Z5U 10 4 M T 2 A T Size Code Packaging: T=7" Reel, B=Bulk *R=13" Reel - *Special Order Temperature Characteristic Marking A=No mark *S=EIA Code - *Special Order Capacitance Code: First 2 Significant Digits For Capacity. Indicates number of zeros following digits of capacitance in picofarads WVDC Code A WVDC 7 10 16 1 2 3 4 25 50 100* 200* *Special Order - Consult Factory CAPACITANCE TOLERANCE M Z Code 20 +80 -20 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, (non-magnetic), RoHS Compliant** **Consult ATC for availability % STANDARD EIA CAPACITANCE VALUES REFERENCE TABLE Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code 0R5 0.5 6R8 6.8 560 56 471 470 392 3900 273 1R0 1.0 8R2 8.2 680 68 561 560 472 4700 333 1R2 1.2 100 10 820 82 681 680 562 5600 393 1R5 1.5 120 12 101 100 821 820 682 6800 473 1R8 1.8 150 15 121 120 102 1000 822 8200 563 2R2 2.2 180 18 151 150 122 1200 Cap. Code Cap.F 683 103 .010 2R7 2.7 220 22 181 180 152 1500 823 123 .012 3R3 3.3 270 27 221 220 182 1800 104 153 .015 3R9 3.9 330 33 271 270 222 2200 124 183 .018 4R7 4.7 390 39 331 330 272 2700 154 223 .022 5R6 5.6 470 47 391 390 332 3300 184 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w . a t c e r a m i c Cap. Code Cap. F 224 .22 274 .27 334 .33 394 .39 474 .47 564 .56 684 .68 824 .82 105 1.0 125 1.2 155 1.5 Cap. Code Cap. F 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10.0 126 12.0 156 15.0 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Cap.F .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m 7 APPLICATION NOTES TERMINATION STYLES T = RoHS Compliant Tin plated over Nickel Barrier (Standard) W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, RoHS Compliant (non-magnetic) **Consult ATC for availability RECOMMENDED SOLDERING PROFILES POST ASSEMBLY COOLDOWN AND CLEANING * Allow assembly to cool to room temperature. Do not attempt to speed up cooldown cycle as thermal cracking may result. 150 100 50 0 1 2 3 4 Preheat Zone Wave Soldering 300 Cooling Zone Temperature (Celsius) 215 200 0 * Use a low wattage iron with correct size tip. * A preheat of 150C minimum is recommended. * Do not exceed 280C maximum. * Apply heat thru the solder. Minimize the contact to termination metalization. * Keep the soldering process as short as possible. Reflow Soldering Cool Down Zone Temperature (Celsius) Temperature (Celsius) Vapor Phase Soldering 250 The reflow, vapor phase, and wave soldering profiles shown are recommended. Hand soldering is not preferred but can be accomplished successfully if the following precautions are followed: * Cleaning solvents are dependant on materials and flux type used. Multi-stage cleaning in alcohol, water, hydrocarbons, and common degreaser solvents will not damage our chip capacitors. * A mildly activated rosin flux 'RMA' is recommended. * Sn60 (60% Sn, 40% Pb) or Sn62 (62.5% Sn, 36.1% Pb, 1.4% Ag) are recommended. * Sizes 2225 and larger should be re-flow or vapor phase soldered. Wave solder is not recommended on these larger sizes. Entrance - Preheat Reflow Zone SOLDERING TECHNIQUES Soldering Time Max. 7 Seconds 250 220 200 150 100 50 Air Cooling 25 C 0 5 20 0 Time - Minutes Soldering Zone Range Recommended Area 40 60 80 100 120 140 160 Preheat Zone 300 260 250 Cooling Zone Soldering Time Max. 5 Seconds 200 150 100 50 Air Cooling 25 C 0 180 200 0 20 40 60 80 100 120 140 160 180 200 Time - (Seconds) Soldering Zone Range Recommended Area Time - (Seconds) Soldering Zone Range Recommended Area TAPE AND REEL PACKAGING FOR AUTOMATIC INSERTION * Tape and reel packaging is preferred and is available for all sizes. * For 13" reel use "R" in part number code. * To specify 7" reel use "T" in part number code. * Parts are packaged per EIA-RS481 specification. * For tape size and approximate quantity per reel consult factory. ATC CROSS REFERENCE GUIDE ATC SERIES DESCRIPTION ATC 0402 EIA 0402 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R ATC 0603 AVX KEMET JOHANSON MURATA PHILLIPS TDK VITRAMON 0402 C0402 R07 GRM36 0402 ECU (Q) CXXXX0402 CC0402 VJ0402 EIA 0603 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 0603 C0603 R14 GRM39 0603 _ CXXXX0603 CC0603 VJ0603 ATC 0805 EIA 0805 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 0805 C0805 R15 GRM40 0805 ECU (N) CXXXX0805 CC0805 VJ0805 ATC 1206 EIA 1206 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1206 C1206 R18 GRM42-6 1206 ECU (M) CXXXX1206 CC1206 VJ1206 ATC 1210 EIA 1210 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1210 C1210 S41 GRM42-2 1210 EPU (P) CXXXX1210 CC1210 VJ1210 ATC 1812 EIA 1812 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1812 C1812 S43 GRM43-2 1812 - - - VJ1812 ATC 2225 EIA 2225 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 2225 C2225 S48 - 2225 - - - VJ2225 (KYOCERA) A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w NOVACAP PANASONIC C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 001-847 Rev. I; 5/06