Switchlocks
Product Selection Guide
L–2
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Series
Switch Type
Lock
Cam
Miniature
Anti-static
Momentary
Poles
Indexing
Max. Current
Panel Mount Options
Snap-in
Bushing
Thru-hole
Page No.
PL
5 Tumbler
Plastic
•
•
N/A
90º
•
L–39
H
4 & 6 Tumbler
Metal
1 & 2
45º & 90º
12 Amps
•
L–34
A
4 & 5 Tumbler
Metal
•
1 - 4
30º, 45º, 90º
2.5 Amps
•
•
L–29
Switchlock
Switchlock
Series Y YF YM P PF & PM
Switch Type 4,5,6 Tumbler 4 Tumbler 4 Tumbler 4 Tumbler 5 Tumbler
Lock Metal Metal Metal Plastic Plastic
Latch Pawl •
Miniature •• •
Anti-static •
Momentary •
Poles 1 & 2 1 & 2 1 1 & 2 1 & 2
Indexing 45º & 90º 90º 90º 45º & 90º 45º & 90º
Max. Current 4 Amps 4 Amps 4 Amps 4 Amps 4 Amps
Panel Mount Options
Snap-in ••
Bushing • • •
PC Thru-hole •
Page No. L–3 L–11 L–15 L-18 L–22/L-26
L–3
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
Models Available
Features/Benefits
•
Anti-static switch—exceeds
20 KV DCstatic resistance
•
Momentary models available
•
Wire leads and harnesses available
Typical Applications
•
Point-of-sale terminals
•
Cash registers
•
Computers
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-9 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º, 2-4 positions (4&5 tumbler switchlocks).
45º, 3 positions; or 90º, 2 positions (6 tumbler tubular
switchlocks).
Other functions available, consult Customer Service Center.
STATIC RESISTANCE: Anti-static models exceed 20 KV DC static
resistance @ sea level, lock body to terminals.
MOUNTING TORQUE: 10 in./lbs.; 14 in./lbs max.
Materials
LOCK: Zinc alloy with stainless steel facing, std. (4 & 5 tumbler lock
and 6 tumbler tubular lock).
KEYS: Two nickel plated brass keys, with code number, std.
(4 and 5 tumbler lock). Two die cast chrome plated zinc alloy
keys,std. (6 tumbler lock).
SWITCH HOUSING: Glass filled polyester (UL 94V-0).
CONTACTS AND TERMINALS: Q contact material: Copper, silver
plated. See page L-9 for additional contact materials.
MOUNTING NUT: Zinc alloy.
MOUNTING CLIP: Steel, zinc plated.
DRESS NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages L–4 through L–10. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
Y10013 SP, 45°, keypull pos. 1
Y1011U SP, 90°, keypull pos. 1 & 2
Y1001U SP, 45°, keypull pos. 1 & 3
Y2001U DP, 45°, keypull pos. 1 & 3
Y10082 SP, 45°, keypull pos. 1
Y20082 DP, 45°, keypull pos. 1
Y100AA SP
,45°, keypull pos. 1, 2 & 3
Y200AA DP, 45°, keypull pos. 1, 2 & 3
Y100AB SP, 45°, keypull pos. 1, 2, 3 & 4
Y200AB DP
,45°,keypull pos. 1, 2, 3 & 4
Y10113 SP, 90°, keypull pos. 1
Y20113 DP, 90°, keypull pos. 1
Y1011C SP, 90°, keypull pos.2
Y2011C DP
,90°,keypull pos. 2
Y2011U DP, 90°, keypull pos. 1 & 2
Y14173 SP, 90°, keypull pos. 1
Y1417U SP, 90°, keypull pos. 1,2 & 3
Y10812 SP
,45°, mom., keypull pos. 1
Y20812 DP, 45°, mom., keypull pos. 1
Y19073 SP w/common, 90°, keypull pos. 1
Y1907U SP w/common, 90°, keypull pos. 1, 2 & 3
Y1900S SP w/common, 90°, keypull pos. 1, 2, 3 & 4
Mounting/Lock Style
NWith nut
DWith clip
LWith removable dress nut and latch pawl
RWith removable dress nut
Keying
2Two nickel plated brass keys (4 &
5 tumbler) or two die cast zinc alloy keys with
chrome plating (6 tumbler)
6Two nickel plated brass keys with code on lock face
Lock Finish
2Stainless steel facing
8Gloss black facing
FPolished nickel facing
Terminations
03 Solder lug with hole
01 Solder lug with notch
02 PC Thru-hole
07 Solder lug with hole
(Y19OXX models only)
WC Wire lead
Contact Material
QSilver
BGold
GGold over silver
Seal
NONE No seal
EEpoxy seal
Lock Type
A4 Tumbler lock (YXO8 models)
C4 Tumbler lock with detent
V6 Tumbler tubular lock
B5 Tumbler lock
R4 Tumbler lock with detent and anti-Static switch
W6 Tumbler tubular lock with anti-Static switch
Patent No. 4,639,562
L–4
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
SWITCH AND LOCK FUNCTION
= Momentary Positions (45º)
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
45º
Mom.
Position 1
1-2
1-2, 5-6
8-1
8-1, 4-5
Y10812
Y20812
SP
DP
4
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
MODEL
NO.
NO.
POLES
NO.
TUMBLERS
SINGLE & DOUBLE POLE MOMENTARY SWITCHES
Positions 1, 2 & 36-71-37-1
Y1417U
SP4
Position 16-71-37-1
Y14173
SP4
Positions 1 & 2
1-3
1-3, 5-7
8-1
8-1, 4-5
Y1011U
Y2011U
SP
DP
4, 5 & 6
Position 2
1-3
1-3, 5-7
8-1
8-1, 4-5
Y1011C
Y2011C
SP
DP
4 & 5
Position 1
1-3
1-3, 5-7
8-1
8-1, 4-5
Y10113
Y20113
SP
DP
4, 5 & 6
Positions 1, 2, 3 & 4
3-4
3-4, 7-8
2-3
2-3, 6-7
1-2
1-2, 5-6
8-1
8-1, 4-5
Y100AB
Y200AB
SP
DP
4
Positions 1, 2 & 3
7-8
7-8, 3-4
1-2
1-2, 5-6
8-1
8-1, 4-5
Y100AA
Y200AA
SP
DP
4
Position 1
7-8
7-8, 3-4
1-2
1-2, 5-6
8-1
8-1, 4-5
Y10082
Y20082
SP
DP
4 & 5
Positions 1 & 3
2-3
2-3, 6-7
1-2
1-2, 5-6
8-1
8-1, 4-5
Y1001U
Y2001U
SP
DP
4, 5 & 6
Position 12-31-28-1
Y10013
SP4, 5 & 6
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
MODEL
NO.
NO.
POLES
NO.
TUMBLERS
SINGLE & DOUBLE POLE SWITCHES
POS. 1
2
3
POS. 1
2
POS. 1
2
3
2
3
POS. 1
POS. 1
23
POS. 1
2
3
4
2
POS. 1
POS. 1
2
POS. 1
2
POS. 1
2
3
Terminal numbers molded on bottom of housing.
All models with all options when ordered
with ‘G’ or ‘Q’ contact material.
45º
90º
L–5
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
SWITCH AND LOCK FUNCTION
SLOTS IN THIS
LOCATION FOR MOUNTING
STYLE 'D' CLIP
SLOTS IN THIS
LOCATION FOR MOUNTING
STYLE 'D' CLIP
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
4 & 5 Tumbler
6 Tumbler
Part number shown: Y100132C203NQ
Part number shown: Y1011U2V203NQ
Positions 1, 2, 3 & 4C-4C-3C-2C-1
Y1900S
Position 1
Positions 1, 2 & 3
C-4C-2C-1
Y19073
Y1907U
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
MODEL
NO.
NO.
POLES
NO.
TUMBLERS
SINGLE POLE SWITCHES WITH COMMON
POS. 1
2
3
POS. 1
2
3
POS. 1
2
4
3
4SP 90º
Terminal numbers marked on insulator.
All models with all options when ordered
with ‘G’ or ‘Q’ contact material.
NOTE: Epoxy seal not available. Removable dress
nut not available with any Y190XX models.
L–6
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
SWITCH AND LOCK FUNCTION
KEYING
LOCK TYPE
.
AVAILABLE OPTION COMBINATIONS
LOCK TYPES TERMINATIONS
MOUNTING/LOCK
STYLES
MODELS AB C R V W 01 02 03 07 WC D L N R
YX0013
•• ••••• •• ••
YX001U
•••••••• •••••
YX0082
••• ••• •• •
YX00AX
•• ••• •• ••
YX0113
•••••••• •• ••
YX011C
••• ••• •• ••
YX01IU
•••••••• •••••
Y141XX
•• ••• •• ••
YX0812
•••••••
Y190XX
•• • ••• •
B
5 TUMBLER LOCK
A
4 TUMBLER LOCK (MOMENTARY MODELS ONLY)
V
6 TUMBLER TUBULAR LOCK
C
4 TUMBLER LOCK WITH DETENT
KEYING
NOTE: Keys are available separately, see page L-10. Key head shape subject to change without notice.
NOTE: All orders keyed alike, standard. For more than one key code, master keying,
replacement keys, or other special features, consult Customer Service Center.
YESYES
2 NICKEL PLATED BRASS KEYS, 4 & 5
TUMBLER ONLY
6
NOYES
2 NICKEL PLATED BRASS KEYS
(4 & 5 TUMBLER) or 2 DIE CAST CHROME
PLATED ZINC ALLOY KEYS (6 TUMBLER)
2
CODE NO.
ON LOCK
CODE NO.
ON KEY
KEYING OPTIONS
OPTION
CODE
L–7
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
LOCK TYPE
LOCK FINISH
TERMINATIONS
Available with Lock Finish '2' only.
PC MOUNTING
WC
WIRE LEAD
02
PC THRU-HOLE
07
SOLDER LUG WITH HOLE
WC
WIRE LEAD
02
PC THRU-HOLE
01
SOLDER LUG WITH NOTCH
03
SOLDER LUG WITH HOLE
W
6 TUMBLER TUBULAR LOCK WITH
ANTI-STATIC SWITCH
R
4 TUMBLER LOCK WITH DETENT AND
SHORT ANTI-STATIC SWITCH.
SHORT ANTI-STATIC LOCK TYPES
All Models Except Y190
Y190 Model Only
Black wire standard. other colors
and lengths available, consult
Customer Service Center.
UL style 1015.
Black wire standard. other colors
and lengths available, consult
Customer Service Center.
UL style 1015.
Available with
Lock Types ‘V’ & ‘W’ only.
NOTE: For available option combinations, see page L-9.
NOTE: For available option combinations, see page L-9.
U.S. Pat. No. 4,639,562 Exceeds 20 KV DC static resistance @ sea level, lock body to terminals.
F
POLISHED NICKEL
8
GLOSS BLACK
2
STAINLESS STEEL
L–8
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
MOUNTING/LOCK STYLE
.136 DIA.
(3,45)
BURR SIDE UP
GRAIN
DIRECTION
U
S
P
a
T
N
0
4
5
6
3
6
5
o
.655
(16,62)
.225
(5,72)
.100
(2,54)
.034
(0,86)
.468
(11,88)
.965
(24,51)
.688
(17,46)
1.000
(25,40)
.500
(12,70)
.470
(11,94)
.105
(2,67)
1.047
(26,59)
PANEL MOUNTING
Latch pawl shown in pos. 1.
PANEL MOUNTING
.125 thk.
(3,18)
1.010
(25,65)
.875
(22,23)
3/4±24 UNS
PANEL MOUNTING
L
REMOVABLE DRESS NUT WITH LATCH PAWL
R
REMOVABLE DRESS NUT
N
WITH NUT
D
WITH CLIP
.360 (9,14)
C, R
.270 (6,68)
A, N
DIMENSIONS
‘A’
LOCK TYPES
LOCK DIMENSIONS
.085-.105 (2,16-2,67)WITH CLIP
D
.085-.105 (2,16-2,67)
WITH NUT
N
PANEL THICKNESS
MOUNTING
STYLE
OPTION
CODE
Nut part number: 937C00000
NOTE: Removable dress nut not available with Y1900A or Y100AA model options.
TYPICAL INSTALLATION
Install hex nut with enough clearance to allow for
dress nut and panel. Place switch through cutout in
rear of panel. Install and tighten dress nut by hand,
then tighten hex nut. Always tighten assembly with
back of panel hex nut to avoid damaging front of panel.
Clip part number: 906B00000
L–9
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
MOUNTING/LOCK STYLE
CONTACT MATERIAL
SEAL
PANEL THICKNESS
MOUNTING
STYLES A, B LOCK TYPES C, R LOCK TYPES V, W LOCK TYPES
D.065-.085 (1, 65-2, 16) .085-.105 (2, 16-2, 67)
N .105 (2, 67) max. .195 (4, 95) max. .215 (5, 46) max.
L .215 (5, 46) max. –
R.125 (3, 18) max. .215 (5, 46) max. –
AVAILABLE OPTION COMBINATIONS
MOUNTING
LOCK FINISHES LOCK TYPES
MOUNTING
STYLES 28FAB
CRVW
D
•• • • ••••
N
•• • • ••••
R
•••••
L
••••
•
•
EPOXY .075 MAX.
(1,91)
E
EPOXY SEAL
NONE
NO SEAL
Mounting Information (All Models)
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (std. with all termination options).
3
CONTACTS & TERMINALS: Copper, with gold plate over silver plate.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC or 28 V DC;
2 AMPS @ 250 AC V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES
LOW LEVEL/DRY CIRCUIT
OR POWER
GYES YES
GOLD 1
GOLD SILVER 30.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC
or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA)
L–10
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Y Series
4, 5 & 6 Tumbler Switchlocks
AVAILABLE HARDWARE
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
115140126
Material: Brass
Finish: Nickel plate
Key Code: D001
5 TUMBLER
PART NO. (ONE KEY)
115441001
Material: Brass
Finish: Nickel plate
Key Code: AAAA
PART NO. (ONE KEY)
363C1AAAA
Material: Zinc alloy
Finish: Chrome plate
L–11
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
YF Series
4 Tumbler Miniature Switchlocks
Models Available
Features/Benefits
•
Multi-pole and multi-position
•
Positive detent
•
Low level and power capability
Typical Applications
•
Computer servers
•
Point-of-sale terminals
•
Cash registers
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-14 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 90º:2 positions max.
Materials
LOCK: Zinc alloy with stainless steel facing. 4 tumbler,
single bitted lock with integral detent mechanism.
KEYS: Two nickel plated brass keys with code number.
SWITCH HOUSING: 6/6 Nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver plated.
See page L-14 for additional contact materials.
MOUNTING NUT: Brass, bright zinc plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages L–12 through L–14. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
YF0113 SP, 90° Index, keypull pos. 1
YF2113 DP
,90°Index, keypull pos. 1
YF011U SP, 90° Index, keypull pos. 1 & 2
YF211U DP, 90° Index, keypull pos. 1 & 2
Mounting Style
NWith nut
Keying
2Two nickel plated brass keys
Lock Finish
2Stainless steel facing
8Gloss black facing
Terminations
03 Solder lug with hole
WC Wire lead
Contact Material
QSilver
BGold
Lock Type
C4 Tumbler, single bitted
lock with detent
L–12
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
KEYING
0029
.772
(19,6)
.174
(4,19)
1.435
(36,44)
.548
(13,91)
2
POS. 1
TERMINAL NUMBERS
MOLDED ON HOUSING
0029
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
T
erminal numbers molded
on bottom of housing.
TERMINAL NUMBERS
Part number shown: YF01132C203NQ
NOTE: All orders keyed alike with code number on key. For more than one key code,
replacement keys, or other special features, consult Customer Service Center.
2
TWO NICKEL PLATED BRASS KEYS
POS. 1
2
All models with all options when ordered with ‘Q’ contact material.
YF Series
4 Tumbler Miniature Switchlocks
SWITCH AND LOCK FUNCTION
Positions 1 & 2
1-3
1-3, 5-7
8-1
8-1, 4-5
YF011U
YF211U
SP
DP
Position 1
1-3
1-3, 5-7
8-1
8-1, 4-5
YF0113
YF2113
SP
DP
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
SINGLE & DOUBLE POLESWITCHES
90º
Key Part Number: 960B10029
L–13
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
YF Series
4 Tumbler Miniature Switchlocks
LOCK TYPE
LOCK FINISH
TERMINATIONS
WC
WIRE LEAD
8
GLOSS BLACK FACING
2
STAINLESS STEEL FACING
C
4 TUMBLER, SINGLE BITTED LOCK WITH DETENT
03
SOLDER LUG WITH HOLE
Black wire standard, other colors and lengths available,
consult Customer Service Center. UL style 1015.
L–14
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
YF Series
4 Tumbler Miniature Switchlocks
CONTACT MATERIAL
AVAILABLE HARDWARE
KEY SHOWN IN
POSITION ONE
LOCK MUST BE IN PANEL
BEFORE ATTACHING
SWITCH BASE
SWITCH BASE
ALIGN TAB WITH SLOT
AND SNAP TOGETHER 4 TUMBLER LOCK
PANEL MOUNTING
.420
(10,67)
.472 DIA.
(11,99)
Panel thickness:
.300 (7,62) max.
MOUNTING STYLE
Key Code: 0029
PART NO. (ONE KEY)
960B10029
Material: Brass
Finish: Nickel plate
N
WITH NUT
Switch and Lock Assembly Instructions
NOTE: Switch installation is permanent. Switch cannot be removed from lock
after assembly. Attempts to separate switch and lock may damage switch.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all
termination options).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models with all options when ordered with ‘Q’ contact material.
Nut part number: 1790901A47
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
L–15
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Models Available
YM Series
4 Tumbler Miniature Switchlocks
Features/Benefits
•
Snap-together assembly allows
for pre-wiring of switch
•
Wire lead terminations available
•
4 Tumbler lock with positive detent
Typical Applications
•
Cable TV connectors
•
Automotive accessories
•
Computers
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 4 AMPS @ 125 V AC,
2 AMPS @ 250 V AC, T65, class 1 (VDE). See page L-17 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 90º:2 positions.
Materials
LOCK: Zinc alloy with stainless steel facing. 4 tumbler single
bitted lock with integral detent mechanism.
KEYS: Two nickel plated brass keys with code number.
SWITCH HOUSING: 6/6 Nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver
plated. See page L-17 for additional contact materials.
MOUNTING NUT: Brass, bright zinc plated.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–16 and L–17. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
YM0613 SPST, 90º Index, keypull pos. 1
YM061U SPST,90º Index, keypull pos. 1 & 2
Mounting Style
NWith nut
Keying
2Two nickel plated brass keys
Lock Finish
2Stainless steel facing
8Gloss black facing
Terminations
05 Quick connect
WC Wire lead
Contact Material
QSilver
BGold
Lock Type
C4 Tumbler, single bitted lock
with detent
L–16
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
YM Series
4 Tumbler Miniature Switchlocks
SWITCH AND LOCK FUNCTION
KEYING LOCK TYPE
0029
.772
(19,6)
.174
(4,19)
1.435
(36,44)
.548
(13,91)
= Detent Positions (90º)
= Key pull possible in these positions
= Stop Positions
LEGEND
8
GLOSS BLACK FACING
2
STAINLESS STEEL FACING
2
TWO NICKEL PLATED BRASS KEYS
C
4 TUMBLER SINGLE BITTED LOCK WITH DETENT
LOCK FINISH
Key part number: 960B10029
NOTE: All orders keyed alike with code number on key. For more than one key code,
replacement keys, or other special features, consult Customer Service Center.
90º
Position 1
Positions 1& 2
ONOFF
YM0613
YM061U
SP
SCHEMATICINDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
SWITCH FUNCTION
POS. 1 POS. 2
MODEL
NO.
NO.
POLES
2
POS. 1
POS. 1
2
SPST
Part number shown: YM0613C205NQ
All models with all options when ordered with ‘Q’ contact material.
L–17
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
All models with all options when ordered with ‘Q’ contact material.
YM Series
4 Tumbler Miniature Switchlocks
TERMINATIONS
MOUNTING STYLE
CONTACT MATERIAL
AVAILABLE HARDWARE
PANEL MOUNTING
.420
(10,67)
.472 DIA.
(11,99 )
Panel thickness:
.300 (7,62) max.
N
WITH NUT
WC
WIRE LEAD
05
QUICK CONNECT
Nut part number: 1790901A47
Black wire standard, other colors and
lengths available, consult Customer
Service Center. UL style 1015.
Key Code: 0029
PART NO. (ONE KEY)
960B10029
Material: Brass
Finish: Nickel plate
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all
termination options).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 AC V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
L–18
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Models Available
P Series
4 Tumbler Snap-in Switchlocks
Features/Benefits
•
Snap-in mounting
•
Multi-pole and multi-position
•
Positive detent
Typical Applications
•
Computers
•
Communication equipment
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC;
1 AMP @ 250 V AC (UL) See page L-20 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º, 2-3 positions.
Materials
SWITCH HOUSING & LOCK: One piece construction,
6/6 Nylon (UL 94V-2), black
4 disc tumbler mechanism.
KEYS: One nickel plated brass key and one key with insert
molded plastic head.
TUMBLERS: Disc tumblers, brass.
CONTACTS & TERMINALS: Q contact material: Copper, silver
plated. See page L-20 for additional contact materials.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–19 and L–21. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
P10113 SP, 90º Index, keypull pos. 1
P20113 DP
,90º Index, keypull pos. 1 & 2
P100AF SP, 45º Index, keypull pos. 1, 2 & 3
P200AF DP, 45º Index, keypull pos. 1, 2 & 3
P1011U SP
,90º Index, keypull pos. 1 & 2
Contact Material
QSilver
GGold over silver
Keying
2Two nickel plated brass keys
TOne nickel plated brass key
with insert molded plastic
square head and one
nickel plated brass key
Lock Finish
MPlastic lock with matte finish
Terminations
03 Solder lug
WC Wire lead
Lock Color
2Black
Lock Type
C4 tumbler lock with detent
Key Color
2Black
NONE Nickel plated brass
NOYES
1 NICKEL PLATED BRASS KEYS, WITH
PLASTIC INSERT MOLDED SQUARE HEAD &
1 NICKEL PLATED BRASS KEY
T
NOYES
2 NICKEL PLATED BRASS KEYS
2
CODE NO.
ON LOCK
CODE NO.
ON KEY
KEYING OPTIONS
OPTION
CODE
L–19
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
KEYING
A126
.798
(20,26)
1.635
(41,52)
.775
(19,68)
NICKEL PLATED BRASS KEY
Key part number: 115140126
Code number on this side,
logo on opposite side.
TERMINAL NUMBERS
MOLDED ON HOUSING
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
Terminal numbers
molded on housing.
Part number shown: P100AFTCM03Q22
NOTE: All orders keyed alike with
code number on key. For more than
one key code, replacement keys, or
other special features, consult
Customer Service Center.
All models with all options when ordered with ‘Q’ contact material.
P Series
4 Tumbler Snap-in Switchlocks
SWITCH AND LOCK FUNCTION
Positions 1, 2 & 3
1-2
1-2, 5-6
8-1
8-1, 4-5
P100AF
P200AF
DP
Position 1
1-3
1-3, 5-7
8-1
8-1, 4-5
P10113
P20113
SP
DP
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
90º
2-3
2-3, 6-7 45º
Positions 1 & 2
1-38-1
P1011U
SP 90º
.948
(24,07)
1.766
(44,85)
.775
(19,68)
NICKEL PLATED BRASS KEY WITH
PLASTIC INSERT MOLDED SQUARE HEAD
Key part number: 11599112602
POS. 1
POS. 2
POS. 1
POS. 3
POS. 2
POS. 1
POS. 2
L–20
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC; 1 AMP @ 250 V AC (UL/CSA)
LOW LEVEL/DRY CIRCUIT
OR POWER
G
SILVER
2
POWER
0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC;
1 AMP @ 250 V AC (UL/CSA)
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD OVER SILVER
3
.020 THK.
(0,51)
.080
(2,03)
.046
(1,17)
.085
(2,16)
.246
(6,24)
.100
(2,54)
PC MOUNTING
PANEL MOUNTING
Panel Thickness: .100-.200 (2,54-5,08)
P Series
4 Tumbler Snap-in Switchlocks
LOCK TYPE
C
4 TUMBLER LOCK WITH DETENT
LOCK FINISH
M
PLASTIC LOCK WITH MATTE FINISH
TERMINATIONS
03
SOLDER LUG
WC
WIRE LEAD
CONTACT MATERIAL
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options)
3
CONTACTS & TERMINALS: Copper, with gold plate over silver plate termination
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models with all options when ordered with ‘Q’ contact material.
OPTION
CODE LOCK COLOR
BLACK
2
Black wire standard, other colors and
lengths available, consult Customer
Service Center. UL style 1015.
L–21
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
115140126
Material: Brass
Finish: Nickel plate
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
1159112602
BLACK
Material: Brass
Finish: Nickel plate
6/6 Nylon insert molded head
P Series
4 Tumbler Snap-in Switchlocks
AVAILABLE HARDWARE
L–22
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Models Available
PF Series
5 Tumbler Miniature Snap-in Switchlocks
Features/Benefits
•
Snap-in mounting
•
Multi-pole and multi-position
•
Positive detent
Typical Applications
•
Computers
•
Point-of-sale terminals
•
Instrumentation
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-25 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º: 3 positions, 90º:2 positions.
Materials
LOCK: 6/6 nylon with matte finish (UL 94V-2), black,
5 tumbler, single bitted lock with integral detent mechanism.
KEYS: Two nickel plated brass keys with black plastic head.
SWITCH HOUSING: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver plated.
See page L-25 for additional contact materials.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–23 through L–25. For additional options not shown in catalog, consult Customer Service Center.
Switch and lock Function
PF011U SP, 90º Index, keypull pos. 1 & 2
PF201U DP, 45º Index, keypull pos. 1 & 3
PF211U DP, 90º Index, keypull pos. 1 & 2
Lock Color
2Black
Key Color
2Black
Keying
ETwo nickel plated
brass keys with insert
molded plastic head
Terminations
03 Solder lug with hole
WC Wire lead
Contact Material
QSilver
BGold
Lock Type
B5 Tumbler lock
with detent
Lock Finish
MPlastic lock with matte finish
Lock Style
KCone shaped facing
L–23
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
PF Series
5 Tumbler Miniature Snap-in Switchlocks
SWITCH AND LOCK FUNCTION
KEYING
.615
(15,62)
.080 x .020
(2,03)x(0,51)
.700 DIA.
.420 DIA
1
2
3
4
5
6
7
8
.230 TYP
(5,84)
.163
(4,14)
.625
POS.1
POS.2
.500
(12,70)
.625
(15,88)
DIA
(15,88ø)
(10,67ø)
(17,78ø)
22º30'
45º0'
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
T
erminal numbers
molded on housing.
E
TWO NICKEL PLATED BRASS KEYS WITH INSERT MOLDED PLASTIC HEAD
2
BLACK
KEY COLOR
OPTION
CODE
NOTE: All orders keyed alike, standard. For more than one key code, replacement keys,
or other special features, consult Customer Service Center.
Part number shown: PF011UEBM03KQ22
Key part number: 617D1004102
KEYING
KEY COLOR
90º
Positions 1 & 2
1-3
1-3, 5-7
8-1
8-1, 4-5
PF011U
PF211U
SP
DP
45º
Positions 1 & 32-3, 6-71-2, 5-68-1, 4-5
PF201U
DP
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
SINGLE & DOUBLE POLE SWITCHES
POS. 1
2
3
POS. 1
2
All models with all options when ordered with ‘Q’ contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–24
L
Switchlock
PF Series
5 Tumbler Miniature Snap-in Switchlocks
LOCK TYPE
LOCK FINISH
TERMINATIONS
LOCK STYLE
KEY SHOWN IN
POSITION ONE
5 TUMBLE LOCK ALIGN TAB WITH SLOT
AND SNAP TOGETHER
LOCK MUST BE IN
PANEL BEFORE
ATTACHING
SWITCH BASE SWITCH BASE
PANEL MOUNTING
Panel thickness:
.050-.080 (1,27-2,03)
.615
(15,62)
.230 TYP
(5,84)
.500
(12,70)
.625
(15,88)
.163
(4,14)
LOCK TYPE
LOCK COLOR
K
CONE SHAPED FACING
WC
WIRE LEAD
03
SOLDER LUG WITH HOLE
M
PLASTIC LOCK WITH MATTE FINISH
B
5 TUMBLER LOCK WITH DETENT
Switch and Lock Assembly Instructions
NOTE: Switch installation is permanent. Switch cannot be
removed from lock after assembly. Attempts to separate
switch and lock may damage switch.
Black wire standard, other colors and lengths available,
consult Customer Service Center. UL style 1015.
OPTION
CODE LOCK COLOR
BLACK
2
L–25
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
PF Series
5 Tumbler Miniature Snap-in Switchlocks
CONTACT MATERIAL
AVAILABLE HARDWARE
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models with all options when ordered with ‘Q’ contact material.
Key Code: 041
PART NO. (ONE KEY)
617D1004102
BLACK
Material: Brass
Finish: Nickel plate
6/6 Nylon insert molded head
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–26
L
Switchlock
Models Available
PM Series
5 Tumbler Miniature Snap-in Switchlocks
Features/Benefits
•
International agency listings
•
Snap-in mounting
•
Wire lead terminations available
•
5 Tumbler lock with positive detent
Typical Applications
•
Computers
•
Point-of-sale terminals
•
Marine equipment
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA); 4 AMPS @ 125 V AC,
2 AMPS @ 250 V AC, T65 (VDE). See page L-28 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 90º:2 positions.
Materials
LOCK: 6/6 nylon with matte finish (UL 94V-2), color black,
5 tumbler, single bitted lock with integral detent mechanism.
KEYS: Two nickel plated brass keys with black plastic head, other
colors available.
SWITCH HOUSING: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver
plated. See page L-28 for additional contact materials.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–27 and L-28. For additional options not shown in catalog, consult Customer Service Center.
Switch and lock Function
PM0613 SP,90º, Index, keypull pos. 1
PM061U SP, 90º Index, keypull pos. 1 & 3
Lock Color
2Black
Key Color
2Black
Keying
ETwo nickel plated
brass keys with insert
molded plastic head
Terminations
05 Quick connect
WC Wire lead
Contact Material
QSilver
BGold
Lock Type
B5 Tumbler lock
with detent
Lock Finish
MPlastic lock with matte finish
Lock Style
KCone shaped facing
L–27
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
PM Series
5 Tumbler Miniature Snap-in Switchlocks
SWITCH AND LOCK FUNCTION
KEYING
LOCK TYPE
= Detent Position (90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
KEYING
KEY COLOR
LOCK TYPE
LOCK COLOR
B
5 TUMBLER LOCK WITH DETENT
E
TWO NICKEL PLATED BRASS KEYS WITH INSERT MOLDED PLASTIC HEAD
2
BLACK
LOCK COLOR
OPTION
CODE
2
BLACK
KEY COLOR
OPTION
CODE
NOTE: Molded plastic head color is black, standard. For more than one key code,
replacement keys, or other special features, consult Customer Service Center.
All models with all options when ordered with ‘Q’ contact material.
90º
Position 1
Positions 1 & 2
ONOFF
PM0613
PM061U
SP
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
SWITCH FUNCTION
POS. 1 POS. 2
MODEL
NO.
NO.
POLES
Part number shown: PM0613EBM05KQ22
SP
POS. 1
POS. 2
POS. 1
POS. 2
Key part number: 617D1004102
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–28
L
Switchlock
WC
WIRE LEAD
PM Series
5 Tumbler Miniature Snap-in Switchlocks
LOCK FINISH
TERMINATIONS
LOCK STYLE
CONTACT MATERIAL
AVAILABLE HARDWARE
PANEL MOUNTING
Panel thickness:
.050-.080 (1,27-2,03)
M
PLASTIC LOCK WITH MATTE FINISH
05
QUICK CONNECT
K
CONE SHAPED FACING
UL style 1015.
Black wire standard, other colors and lengths available,
consult Customer Service Center.
Key Code: 041
PART NO. (ONE KEY)
617D1004102
BLACK
Material: Brass
Finish: Nickel plate
6/6 Nylon insert molded head
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all
termination options).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models with all options when ordered with ‘Q’ contact material.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
4 AMPS @ 125 V AC; or 2 AMPS @ 250 V AC; T65 (VDE).
L–29
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Models Available
A Series
4 & 5 Tumbler 1-4 Pole Switchlocks
Features/Benefits
•
Multi-pole and multi-position
•
Shorting and non-shorting
contacts available
•
Low level and power capability
•
PCB mounting
Typical Applications
•
Security alarm systems
•
Medical equipment
•
Computer servers
Specifications
CONTACT RATING: Q contact material: Switch-2.5 AMPS @
125 V AC; 350 mA @ 125 V DC (UL/CSA). Carry-5 AMPS
continuous. See page L-33 for additional ratings.
ELECTRICAL LIFE: 15,000 make-and-break cycles at full load up to
300,000 detent operations.
CONTACT RESISTANCE: Below 20 m Ωtyp. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
INDEXING: 30º: 2-4 positions, 45º or 90º: 2-3 positions.
STATIC RESISTANCE: Anti-static models exceed 20 KV DC static
resistance @ sea level, lock body to terminals.
Materials
LOCK: Zinc alloy with stainless steel facing.
KEYS: Two nickel plated brass keys with code number.
SWITCH HOUSING: Glass filled 6/6 nylon (UL 94V-0).
MOVABLE CONTACT: Q contact material: Coin silver, silver plated.
See page L-38 for additional contact materials.
STATIONARY CONTACTS & TERMINALS: Q contact material: Brass,
silver plated. See page L-33 for additional contact materials.
MOUNTING NUT: Zinc alloy.
DRESS NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–30 through L–33. For additional options not shown in catalog, consult Customer Service Center.
Switch and lock Function
A21613 DP, 30°, keypull pos. 1
A11413 SP, 90°, keypull pos. 1
A31413 3P, 90º, keypull pos. 1
A3141U 3P, 90°, keypull pos. 1 & 2
A11513 SP, 45°, keypull pos. 1
A31513 3P
, 45°, keypull pos. 1
A3151U 3P
, 45°, keypull pos. 1 & 3
A21582 DP, 45º, keypull pos. 1
A11613 SP, 30°, keypull p05. 1
A1161U SP, 30°, keypull pos. 1 & 4
A12112 SP, 45°, keypull p05. 1
A42112 4P
,45°,keypull pos. 1
Seal
NONE No seal
EEpoxy seal
Keying
2Two nickel plated brass keys
Terminations
ZSolder lug
CPC Thru-hole
Contact Material
QSilver
BGold
Lock Type
A4 Tumbler lock
G5 Tumbler lock with anti-static switch
Y4 Tumbler lock with anti-static switch
Lock Finish
2Stainless steel facing
1Nickel plated with
removable dress nut
8Gloss black facing Shorting/Non-Shorting
NNon-shorting contacts
SShorting contacts
Mounting/Lock Style
NWith nut
RWith removable dress nut
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–30
L
Switchlock
AX161X SWITCH FUNCTION
SHOWN
= Detent Positions (30º, 45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
3P MODEL4P MODEL
SP MODEL (omit terminals B, C & D)
DP MODEL (omit terminals B & D)
TERMINAL NUMBERS
Terminal numbers molded on housing bottom.
4
POS. 1
2
3
4
POS. 1
2
3
2
POS. 1
2
POS. 1
POS. 1
2
3
POS. 1
2
3
POS. 1
2
3
POS. 1
2
*NOTE: Switchlock models A114XX, A115XX, A116XX and A12112 with ‘C’
terminations have additional terminal no. 8 as switch support only. This terminal is
not connected electrically inside switch.
All models with all options when ordered with ‘Q’ contact material.
AX14 models not available with ‘S’ shorting contacts.
Part number shown: A116132Y2NZNQ
A Series
4 & 5 Tumbler 1-4 Pole Switchlocks
SWITCH AND LOCK FUNCTION
45º
Position 1
A-2
A-2, B-5, C-8, D-11
A-1
A-1, B-4, C-7, D-10
A12112 *
A42112
SP
4P
Positions 1 & 4A-4A-3A-2A-1
A1161U *
SP
Position 1
A-4
A-4, C-10
A-3
A-3, C-9
A-2
A-2, C-8
A-1
A-1, C-7
A11613 *
A21613
SP
DP
Position 1A-2, C-8A-5, C-11A-4, C-10
A21582
DP
Positions 1 & 3A-4, B-8, C-12A-2, B-6, C-10A-1, B-5, C-9
A3151U
3P
Position 1
A-4
A-4, B-8, C-12
A-2
A-2, B-6, C-10
A-1
A-1, B-5, C-9
A11513 *
A31513
SP
3P
Positions 1 & 2A-4, B-8, C-12A-1, B-5, C-9
A3141U
3P
Position 1
A-4
A-4, B-8, C-12
A-1
A-1, B-5, C-9
A11413 *
A31413
SP
3P
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
MODEL
NO.
NO.
POLES
90º
30º
45º
L–31
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
A Series
4 & 5 Tumbler 1-4 Pole Switchlocks
KEYING
LOCK TYPE
LOCK FINISH
SHORTING/NON-SHORTING
1.635 (41,52)
(4 TUMBLER)
1.733 (44,01)
(5 TUMBLER)
A126
.798
(20,26)
.775
(19,68)
N
NON-SHORTING CONTACTS (break-before-make)
S
SHORTING CONTACTS (make-before-break)
2
STAINLESS STEEL
1
NICKEL
8
GLOSS BLACK
G
5 TUMBLER LOCK WITH ANTI-STATIC SWITCH
Y
4 TUMBLER LOCK WITH ANTI-STATIC SWITCH
A
4 TUMBLER LOCK WITH REMOVABLE DRESS NUT
NO
YES
2 NICKEL PLATED BRASS KEYS
2
CODE NO.
ON LOCK
CODE NO.
ON KEY
KEYING OPTIONS
OPTION
CODE
NOTE: All orders keyed alike, standard. For more than one key code, replacement keys,
or other special features, consult Customer Service Center.
Key part number: 115140126
Not available with AX23 models.
Not available with AX14 models.
NOTE: For available option combinations, see page L-38.
NOTE: For available option combinations, see page M-38.
•
Y
•
A
•
G
MOUNTING STYLES
N R
LOCK
TYPES
AVAILABLE OPTION COMBINATIONS
•• ••
8
•• •
2
••
1
MOUNTING
STYLES
NR
LOCK TYPES
GAY
FINISH
OPTIONS
AVAILABLE OPTION COMBINATIONS
NOTE: Key head shape subject to change without notice.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–32
L
Switchlock
A Series
4 & 5 Tumbler 1-4 Pole Switchlocks
TERMINATIONS
MOUNTING/LOCK STYLE
PANEL MOUNTING
1.036
(26,31)
.270
(6,68)
PANEL MOUNTING
3P MODEL4P MODEL
PC MOUNTING
R
REMOVABLE DRESS NUT
N
WITH NUT
Z
SOLDER LUG
C
PC THRU-HOLE
TYPICAL INSTALLATION
Install hex nut with enough clearance to allow for dress nut
and panel. Place switch through cutout in rear of panel.
Install and tighten dress nut by hand, then tighten hex nut.
Always tighten assembly with back of panel hex nut to
avoid damaging front of panel.
Nut part number: 937C00000
SP MODEL (omit terminals B, C ,D)
DP MODEL (omit terminals B & D)
L–33
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
CONTACT MATERIAL
SEAL
AVAILABLE HARDWARE
E
EPOXY SEAL
NONE
NO SEAL
Switch and Lock Assembly Instructions
Mounting Information (All Models)
1. Place lock assembly in mounting hole on panel,
secure with mounting nut.
2. Align keying tab on switch assembly with keying
slot on lock assembly.
3. Snap assemblies together.
4. Switch installation is permanent. Switch cannot
be removed from lock after assembly. Attempting
to separate switch and lock may cause damage
to switchlock.
1
MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate.
STATIONARY CONTACTS & TERMINALS: Brass, with gold plate over nickel plate.
2
MOVABLE CONTACT: Coin silver, silver plated.
STATIONARY CONTACTS & TERMINALS: Brass, silver plated (standard with all
termination options).
All models with all options when ordered with ‘Q’ contact material.
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
115140126
Material: Brass
Finish: Nickel plate
Key Code: D001
5 TUMBLER
PART NO. (ONE KEY)
115441001
Material: Brass
Finish: Nickel plate
.215 (5,46) max..125 (3,18) max.
R
.195 (4,95) max..105 (2,67) max.
N
PANEL THICKNESS
A & Y LOCK TYPES G LOCK TYPES
MOUNTING
STYLES
•
••
R
••• •
N
LOCK TYPES
GAY
LOCK FINISHES
128
MOUNTING
STYLES
AVAILABLE OPTION COMBINATIONS
A Series
4 & 5 Tumbler 1-4 Pole Switchlocks
MOUNTING/LOCK STYLE
* Note: See Technical Data section of this catalog for RoHS compliant and compatible
definitions and specifications.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
SWITCH-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
CARRY-5 AMPS CONTINUOUS.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–34
L
Switchlock
Models Available
H Series
4 & 6 Tumbler Power Switchlocks
Features/Benefits
•
Positive detent
•
Multi-pole and multi-position
•
Snap-together assembly
•
Power switching
Typical Applications
•
Machine controls
•
Elevators
Specifications
CONTACT RATING: Q contact material: 12 AMPS @ 125 V AC;
6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). See page
L-37 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
INDEXING: 45º or 90º, 2-4 Positions.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Materials
LOCK: Zinc alloy with stainless steel facing (4 tumbler locks and
6 tumbler tubular lock).
KEYS: Two nickel plated brass keys with code number (4 tumbler).
Two die cast chrome plated zinc alloy keys (6 tumbler).
SWITCH HOUSING: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver plated.
See page L-37 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
MOUNTING NUT: Zinc alloy.
MOUNTING CLIP: Steel, zinc plated.
DRESS NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–35 through L–38. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
H10113 SP,90º Index, keypull pos.1
H2011U DP, 90º Index, keypull pos. 1 & 2
H100AA SP, 45º Index,
keypull pos. 1,2 & 3
H200AA DP, 45º Index,
keypull pos. 1, 2 & 3
H20113 DP, 90º Index,
keypull pos. 1
H1011U SP
,90º Index,
keypull pos.1 & 2
H1417U SP, 90º Index, keypull pos. 1,2 & 3
Key Color
NONE Nickel plated brass (4 tumbler)
or chrome plated zinc alloy (6 tumbler)
2Black
Keying
2Two nickel plated brass keys
(4 tumbler) or two die cast zinc alloy
keys with chrome plating (6 tumbler)
TOne nickel plated brass key with plastic
insert molded square head and one nickel
plated brass key
Lock Finish
2Stainless steel facing
8Gloss black facing
Terminations
05 Quick connect
WC Wire lead
Mounting/Lock Style
NWith nut
DWith clip
Contact Material
QSilver
BGold
Lock Type
F4 Tumbler lock with detent
V6 Tumbler tubular lock
L–35
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H Series
4 & 6 Tumbler Power Switchlocks
SWITCH AND LOCK FUNCTION
**
*
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
T
erminal numbers molded on housing.
4 Tumbler
6 Tumbler
Part number shown: H101132F205NQ
Part number shown: H1011U2V205NQ
Positions 1, 2 & 35-68-26-8
H1417U
SP4
Positions 1 & 2
8-2
8-2, 4-6
7-8
7-8, 3-4
H1011U
H2011U
SP
DP
4 & 6
Position 1
8-2
8-2, 4-6
7-8
7-8, 3-4
H10113
H20113
SP
DP
4 & 6
45ºPositions 1, 2 & 3
6-7
6-7, 2-3
8-1
8-1, 4-5
7-8
7-8, 3-4
H100AA
H200AA
SP
DP
4
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
MODEL
NO.
NO.
POLES
NO.
TUMBLERS
90º
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–36
L
Switchlock
LOCK TYPE
LOCK FINISH
TERMINATIONS
1.635 (4 TUMBLER)
(41, 52)
A126
.798
(20, 26)
.775
(19, 68)
NICKEL PLATED BRASS KEY
Key part number: 115140126
1.766 (4 TUMBLER)
(44, 85)
.948
(24, 07)
.775
(19, 68)
NICKEL PLATED BRASS KEY WITH
PLASTIC INSERT MOLDED SQUARE HEAD
Key part number: 11599112602
1.289
(32,74)
.902
(22,91)
.871
(22,12)
Code number
on opposite
side of key.
CHROME PLATED ZINC ALLOY KEY
Key part number: 363C1AAAA
WC
WIRE LEAD
05
.110" QUICK CONNECT
2
STAINLESS STEEL FACING
V
6 TUMBLER TUBULAR LOCK
F
4 TUMBLER LOCK WITH ADDED DETENT
8
GLOSS BLACK FACING
Available with
V lock type only.
Black wire standard, other colors, gages and
lengths available, consult Customer Service
Center. UL style 1015.
NOTE: All orders keyed alike, standard. For more than one key code, replacement keys,
or other special features, consult Customer Service Center.
NOYES
1 NICKEL PLATED BRASS KEY WITH
PLASTIC INSERT MOLDED SQUARE
HEAD & 1 NICKEL PLATED BRASS KEY
T
NO
YES
2 NICKEL PLATED BRASS KEYS
(4 TUMBLER) OR 2 CHROME PLATED
ZINC ALLOY KEYS (6 TUMBLER)
2
CODE NO.
ON LOCK
CODE NO.
ON KEY
KEY OPTIONS
OPTION
CODE
BLACK
2
NICKEL PLATED BRASS
(4 TUMBLER) OR CHROME PLATED
ZINC ALLOY (6 TUMBLER)
NONE
KEY COLOR
OPTION
CODE
H Series
4 & 6 Tumbler Power Switchlocks
KEYING
NOTE: Key head shape subject to change without notice.
L–37
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
All models with all options when ordered with ‘Q’ contact material.
CONTACT MATERIAL
BURR SIDE UP
GRAIN
DIRECTION
U
S
P
a
T
N
0
4
5
6
3
6
5
o
0.657
0.652
0.062
0.062
R 0.688
-.000
0.225
0.100
0.034
0.468+.062
0.965
0.688
1.000
0.500
0.563
0.327
0.085
R 0.048
0.235
0.470
0.105
R 0.375
± 0.010
± 0.010
90
0
± .003
± .010
R 0.030 ± .010
± .010
Ø 0.136
PANEL MOUNTING
N
WITH NUT
D
WITH CLIP
Switch and Lock Assembly Instructions
1. Place lock assembly in mounting hole on panel,
secure with mounting nut.
2. Align keying tab on switch assembly with keying slot
on lock assembly.
3. Snap assemblies together.
4. Switch installation is permanent. Switch cannot be
removed from lock after assembly. Attempting to separate
switch and lock may cause damage to switchlock.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated.
D .065-.085 (1,65-2,16)
N.195 (4,95) max.
PANEL THICKNESS
MOUNTING
STYLES
Nut part number: 937C00000
Clip part number: 906B00000
H Series
4 & 6 Tumbler Power Switchlocks
MOUNTING/LOCK STYLE
* Note: See Technical Data section of this catalog for RoHS compliant and compatible
definition and specifications.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
LOW LEVEL/DRY CIRCUIT
B
SILVER 2POWER
0.4 VA MAX. @ 20 V AC or DC MAX.
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
YES YES GOLD 1
1 AMP @ 125 V DC (UL/CSA).
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–38
L
Switchlock
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
115140126
Material: Brass
Finish: Nickel plate
Key Code: AAAA
PART NO. (ONE KEY)
363C1AAAA
Material: Zinc Alloy
Finish: Chrome plate
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
1159112602
BLACK
Material: Brass
Finish: Nickel plate
6/6 Nylon insert molded head
H Series
4 & 6 Tumbler Power Switchlocks
AVAILABLE HARDWARE
L–39
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
PL Series
5 Tumbler Miniature Camlocks
Features/Benefits
•
Cost-effective security
•
Custom cams available
Typical Applications
•
Office furniture
•
Cash registers
•
Copy machines
Specifications
INDEXING: 90º: 2 positions.
NOTE: Specifications and materials listed above are for camlocks with standard
options. For information on specific and custom camlocks, consult Customer
Service Center.
Materials
LOCK: 6/6 nylon (UL 94V-2). Color, black.
5 tumbler, single bitted lock with integral detent mechanism.
KEYS: Two nickel plated brass keys with black plastic insert molded
head.
CAM: 6/6 nylon (UL 94V-2).
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–40 and L-41. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
PL001U SP, 90º Index,
keypull pos. 1 & 2
Key Color
2Black
Keying
ETwo nickel plated
brass keys with insert
molded plastic head
Lock Finish
MPlastic lock with matte finish
Cam
A1 .625"
Lock Style
KCone shaped facing
Lock Color
2Black
Lock Type
B5 Tumbler lock with detent
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L–40
L
Switchlock
PL Series
5 Tumbler Miniature Camlocks
LOCK FUNCTION
KEYING
LOCK TYPE
LOCK FINISH
Key part number: 617D1004102
POS. 1
POS. 2
= Detent Position (90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
M
PLASTIC LOCK WITH MATTE FINISH
B
5 TUMBLER LOCK WITH DETENT
E
TWO NICKEL PLATED BRASS KEYS WITH INSERT MOLDED PLASTIC HEAD
NOTE: All orders keyed alike, standard. For more than one key code, replacement keys,
or other special features, consult Customer Service Center.
2
BLACK
LOCK COLOR
OPTION
CODE
2
BLACK
KEY COLOR
OPTION
CODE
90º
Positions 1 & 2
PL001U
INDEXING
LOCK
CONFIGURATION
KEY PULL
POSITIONS
MODEL
NO.
Part number shown: PL001UEBMA1K22
KEYING
KEY COLOR
LOCK TYPE
LOCK COLOR
L–41
L
Switchlock
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
LOCK STYLE
AVAILABLE HARDWARE
PANEL MOUNTING
Panel thickness: .050-.080 (1,27-2,03)
A1
.625"
K
CONE SHAPED FACING
NOTE: Cam not assembled to switch. Other cam lengths and
styles available, consult Customer Service Center.
Key Code: 041
PART NO. (ONE KEY)
617D1004102
BLACK Material: Brass
Finish: Nickel plate
6/6 Nylon insert molded head
PL Series
5 Tumbler Miniature Camlocks
CAM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
C&K Components:
906B00000