m NEC's 80 InGaAs PIN-PD IN COAXIAL PACKAGE NR7800 SERIES FOR 155Mb/s AND 622 Mb/s APPLICATIONS FEATURES DESCRIPTION * SMALL DARK CURRENT: ID = 0.1 nA NEC's NR7800 Series are InGaAs PIN photo diode (PIN-PD) coaxial modules with optical fiber pigtail. These modules are designed for long wavelength optical communication systems and are ideal as recievers for Synchronous Digital Hierarchy (SDH) system, STM-4 and STM-1, ITU-T recommendations. * HIGH SPEED RESPONSE: fc = 2.5 GHz MIN. * HIGH SENSITIVITY: S = 0.89 A/W AT = 1310 nm S = 0.94 A/W AT = 1550 nm * LOW OPERATING VOLTAGE: VR = 5 V * COAXIAL MODULE WITH SINGLE MODE FIBER (SMF) or GI-50 fiber * WITH SC CONNECTOR: Standard, FC connector: option (Refer to Ordering Information) ELECTRO-OPTICAL CHARACTERISTICS (TC = 40 C to +85 C, unless otherwise specified) PART NUMBER SYMBOLS PARAMETERS AND CONDITIONS ID Dark Current, VR = 5 V, TC = 25 C VR = 5 V Ct Terminal Capacitance, VR = 5 V, f = 1 MHz, TC = 25 C S Sensitivity, VR = 5 V, = 1310 nm VR = 5 V, = 1550 nm NR7800 SERIES UNITS MIN nA pF A/W 0.78 0.80 TYP MAX 0.1 1.0 20 1.0 1.5 0.89 0.94 St Temperature Dependence of Sensitivity, VR = 5 V, = 1550 nm % -5 5 Sp Polarization Dependence of Sensitivity, VR = 5 V, = 1550 nm, TC = 25 C % -2.5 2.5 S w Wavelength Dependence of Sensitivity, VR = 5 V, = 1520 to 1560 nm, TC = 25 C % -2.5 2.5 GHz 2.5 dB 30 28 fc ORL Cut-off Frequency, VR = 5 V, TC = 25 C Optical Return Loss, SMF GI-50 Fiber California Eastern Laboratories NR7800 Series ABSOLUTE MAXIMUM RATINGS1 (TC = 25C, unless otherwise specified) SYMBOLS PARAMETERS UNITS RATINGS VR Reverse Voltage V 20 IF Forward Current mA 10 PIN Optical Input Power mW 8 TC -40 to +85 Operating Case Temp. C TSTG Storage Temperature C -40 to +85 TSLD Lead Soldering Temp. C 260 (10 sec.) Relative Humidity (noncondensing) % 85 RH Note: 1. Operation in excess of any one of these parameters may result in permanent damage. TYPICAL PERFORMANCE CURVES (TC = 25C, unless otherwise specified) TEMPERATURE DEPENDENCE OF SENSITIVITY WAVELENGTH DEPENDENCE OF QUANTUM EFFICIENCY 10 Sensitivity (Relative Value), S/S (%) Quantum Efficiency, (%) 100 80 60 40 20 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 -40 -20 0 20 40 60 80 100 Wavelength, (m) Operating Case Temperature, TC (C) REVERSE VOLTAGE DEPENDENCE OF DARK CURRENT TEMPERATURE DEPENDENCE OF DARK CURRENT 10 10 VR = 5 V Dark Current, ID (nA) Dark Current, ID (nA) 0 -10 -60 0 0.9 = 1310 nm TC = 75C 1.0 50C 25C 0.1 0C 1.0 0.1 0.01 0.01 -25C 0.001 0 10 20 Reverse Voltage, VR (V) Remark:The graphs indicate nominal characteristics. 0.001 -60 -40 -20 0 20 40 60 80 Operating Case Temperature, TC (C) 100 NR7800 Series TYPICAL PERFORMANCE CURVES (TC = 25C, unless otherwise specified) REVERSE VOLTAGE DEPENDENCE OF TERMINAL CAPACITANCE FREQUENCY RESPONSE 5 12 9 Terminal Capacitance, Ct (pF) VR = 5 V = 1310 nm RL = 50 Response (dB) 6 3 0 -3 -6 -9 -12 f = 1.0 MHz 1 0.5 -15 2.5 0 0.01 5.0 0.1 Frequency, f (GHz) 1 10 100 Reverse Voltage, VR (V) Remark:The graphs indicate nominal characteristics. OUTLINE DIMENSIONS (Units in mm) NR7800BFP/FR Optical Fiber Length: 1 m MIN 0.50.1 o0.450.05 12.70.2 17.00.2 2 7.20.3 1 3.70.3 3 2 o0.450.05 16.00.2 3 P.C.D. = o2.0 0.5 24.71.0 14.01.0 o2.2 o5.00.2 4.00.5 3.50.5 2.2 10.51.0 1.20.2 3.2 o7.00.2 1.00.1 o3.20.2 o3.20.2 o5.00.2 4.00.2 o0.9 3.50.5 11.21.0 4.00.5 14.01.0 25.41.0 o0.9 3 P.C.D. = o2.0 1 2 4-R1.250.2 3 1. Anode (Negative) 2. Cathode (Positive) 3. Case 2 2 - o2.5 1 8.50.2 12.00.1 7.00.2 Optical Fiber Length: 1 m MIN NR7800CP/CR 1 1. Anode (Negative) 2. Cathode (Positive) 3. Case NR7800 Series OPTICAL FIBER CHARACTERISTICS PARAMETER UNITS SPECIFICATION SMF GI-50 Mode Field Diameter m 9.51 - Core Diameter m - 503 Cladding Diameter m 1252 1252 Maximum Cladding Noncircularity % 2 2 Maximum Core/Cladding Concentricity % 1.6 4.0 mm 0.90.1 0.90.1 Cut-off Wavelength nm 1100 to 1270 - Minimum Fiber Bending Radius mm 30 30 Fiber Length mm 1000 MIN 1000 MIN Outer Diameter Flammability UL1581 VW-1 352 52 mm 8.990.5 mm Connector Fiber Length: 1000 mm MIN ORDERING INFORMATION PART NUMBER FLANGE TYPE NR7800FP-BC-AZ* Flat mount Flange NR7800FP-CC-AZ* NR7800FR-BB-AZ* NR7800FR-CB-AZ* NR7800CP-BC-AZ* Vertical Mount NR7800CP-CC-AZ* Flange NR7800CR-BB_AZ* NR7800CR-CB-AZ* Note: 1. SC Connector: standard FC Connector: option FIBER TYPE SMF GI-50 Fiber SMF GI-50 Fiber AVAILABLE CONNECTOR1 With FC-UPC Connector With SC-UPC Connector With FC-SPC Connector With SC-SPC Connector With FC-UPC Connector With SC-UPC Connector With FC-SPC Connector With SC-SPC Connector *NOTE: Please refer to the last page of this data sheet, "Compliance with EU Directives" for Pb-Free RoHS Compliance Infomation. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 04/02/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 3-180 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 3-181