R.47 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Taped Loose Fig.1 Fig.2 Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R47 O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. Temperature: Relative humidity (RH): Test duration: Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. +40C 2C 93% 2% 56 days +60C 2C 95% 2% 500 hours Performance Operating temperature range: -40 to +110C Related documents: IEC 60384-14; EN 60384-14. Endurance: Test conditions 4700pF to 2.2F Temperature: Test duration: Voltage applied: Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Tolerance 5% (J) available upon request. +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Insulation resistance: Test conditions L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Climatic category: 40/110/56 IEC 60068-1 Dissipation factor (DF): tg x 10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Capacitance range: B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All Test conditions 1st Plates: metal layer deposited by evaporation under vacuum. 440Vac / 1000Vdc; 50/60Hz 10.0 15.0 15.0 22.5 27.5 37.5 Damp heat, steady state: Dielectric: polypropylene film - 2 sections. Rated voltage (VR): Maximum dimensions (mm) B max H max L max test method and performance GENERAL TECHNICAL DATA electrical characteristics Pitch Box thickness (B) (mm) (mm) Test conditions Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M 30000 s for C0.33F for C>0.33F Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% Winding scheme Test voltage between terminations (on all pieces): 1700Vac for 1 s + 2700Vdc for 1 s at +25C5C single sided metallized polypropylene film 2 sections 159 09/2008 R.47 X2 CLASS (IEC60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R47 Rated Cap. 440 Vac / 1000 Vdc Std dimensions B Od H L p Max dv/dt at 420Vdc Part Number APPROVALS (V/ s) 4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - 01 - 6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - 01 - 8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - 01 - 0.010 F 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - 01 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - 01 - 0.012 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - 01 - 0.018 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - 01 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - 01 - 0.027 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - 01 - 0.033 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - 01 - 0.039 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - 01 - 0.047 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - 01 - 0.047 F 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - 02 - 0.047 F 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - 03 - 0.056 F 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - 01 - 0.068 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - 01 - 0.068 F 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - 02 - 0.068 F 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - 03 - 0.082 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - 01 - 0.10 F 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - 01 - 0.047 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - 01 - 0.047 F 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - 02 - 0.068 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - 01 - 0.10 F 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - 01 - 0.12 F 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - 01 - 0.15 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - 01 - 0.18 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3180 - - 01 - 0.22 F 11.0 20.0 26.5 22.5 0.8 300 R474N 3220 - - 01 - 0.27 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - 01 - 0.33 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - 01 - 0.15 F 9.0 17.0 32.0 27.5 0.8 225 R474R 0.18 F 9.0 17.0 32.0 27.5 0.8 225 R474R 0.22 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - 01 - 0.27 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - 02 - 0.33 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - 02 - 0.39 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - 01 - 0.47 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - 01 - 0.56 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - 01 - 0.68 F 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - 01 - 0.82 F 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - 01 - 1.0 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - 01 - 1.2 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - 01 - 1.5 F 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - 01 - 0.47 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - 01 - 0.56 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - 01 - 0.68 F 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - 01 - 0.82 F 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - 01 - 1.0 F 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - 01 - 1.2 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - 01 - 1.5 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - 01 - 1.8 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - 01 - 2.2 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - 01 - (*) Class X2 File No. CA08.00101 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No. E97797 Electromagnetic Interference Filters File No. E85238 UL 1283 Approved according to IEC 60384-14 According to IEC 60065. (*)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ 3150 - - 01 - REEL O500mm 3180 - - 01 - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) Loose, short leads Loose, long leads Loose, long leads 04 +2 25 -1/+2 30 +5 00 50 40 Note: Ammo-pack is the preferred packaging for taped version. Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm 09/2008 ENEC IEC 60384-14 160 R.47 X1 CLASS (IEC 60384-14) - MKP Series Taped Loose Fig.1 O d 0.05 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Fig.2 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X1 shall be applied for permanently connected apparatus. Note: Permanently connected apparatus: apparatus which is intended for connection to the mains by a connection which cannot be loosened BY HAND. BY HAND: operation that does not require the use of any object such a tool, coin, etc. PRODUCT CODE: R47 *See size table. All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film - 2 sections. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Temperature: Relative humidity (RH): Test duration: Performance 4700pF to 2.2F Capacitance values: E6 series (IEC 60063 Norm). Endurance: Test conditions Temperature: Test duration: Voltage applied: Dissipation factor (DF): tg x 10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Insulation resistance: +25C5C 1 min 100 Vdc +60C 2C 95% 2% 500 hours Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. 440Vac / 1000Vdc; 50/60Hz Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); Tolerance 5% (J) available upon request. +40C 2C 93% 2% 56 days Test conditions 2nd electrical characteristics Performance 1x105 M 30000 s H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Test conditions 1st Operating temperature range: -40 to +110C Related documents: IEC 60384-14; EN60384-14 Temperature: Voltage charge time: Voltage charge: B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All Temperature: Relative humidity (RH): Test duration: Climatic category: 40/110/56 IEC 60068-1 Test conditions 10.0 15.0 15.0 22.5 27.5 37.5 Damp heat, steady state: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Capacitance range: Maximum dimensions (mm) B max H max L max test method and performance Leads: tinned wire. Rated voltage (VR): Pitch Box thickness (B) (mm) (mm) Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s for C0.33F for C>0.33F Performance Test voltage between terminations (on all pieces): 1700Vac for 1 s + 2700Vdc for 1 s at +25C5C Capacitance change |C/C|: 2% 161 09/2008 R.47 X1 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R47 APPROVALS Rated Cap. 440 Vac / 1000 Vdc Std dimensions B Od H L p Max dv/dt at 420Vdc Part Number (*) (V/ s) 4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - A1 - 6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - A1 - 8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - A1 - 0.010 F 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - A1 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - A1 - 0.012 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - A1 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - A1 - 0.018 F 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - A1 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - A1 - 0.027 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - A1 - 0.033 F 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - A1 - 0.039 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - A1 - 0.047 F 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - A1 - 0.047 F 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - A2 - 0.047 F 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - A3 - 0.056 F 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - A1 - 0.068 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - A1 - 0.068 F 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - A2 - 0.068 F 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - A3 - 0.082 F 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - A1 - 0.10 F 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - A1 - 0.047 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - A1 - 0.047 F 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - A2 - 0.068 F 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - A1 - 0.10 F 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - A1 - 0.12 F 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - A1 - 0.15 F 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - A1 - 0.18 F 10.0 18.5 26.5 22.5 0.8 300 R474N 0.22 F 11.0 20.0 26.5 22.5 0.8 300 R474N 0.27 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - A1 - 0.33 F 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - A1 - 0.15 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3150 - - A1 - 0.18 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3180 - - A1 - 0.22 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - A1 - 0.27 F 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - A2 - 0.33 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - A2 - 0.39 F 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - A1 - 0.47 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - A1 - 0.56 F 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - A1 - 0.68 F 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - A1 - 0.82 F 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - A1 - 1.0 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - A1 - 1.2 F 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - A1 - Class X1 File No. CA08.00101 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No. E97797 Electromagnetic Interference Filters File No. E85238 UL 1283 Approved according to IEC 60384-14 According to IEC 60065. (*)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ 3180 - - A1 - REEL O500mm 3220 - - A1 - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK 1.5 F 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - A1 - 0.47 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - A1 - 0.56 F 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - A1 - 0.68 F 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - A1 - 0.82 F 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - A1 - 1.0 F 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - A1 - 1.2 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - A1 - 1.5 F 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - A1 - 1.8 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - A1 - 2.2 F 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - A1 - (mm) Loose, short leads Loose, long leads Loose, long leads 04 +2 25 -1/+2 30 +5 00 50 40 Note: Ammo-pack is the preferred packaging for taped version. Winding scheme single sided metallized polypropylene film 2 sections Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm 09/2008 ENEC IEC 60384-14 162 R.47 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Taped Loose Fig.1 Fig.2 Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. V = 520Vac PRODUCT CODE: R475 O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film - 2 sections. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Capacitance range: 520Vac / 1000Vdc; 50/60Hz Performance Endurance: Test conditions Temperature: Test duration: Voltage applied: 4700pF to 2.2F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); Tolerance 5% (J) available upon request. Dissipation factor (DF): tg x 10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M 30000 s for C0.33F for C>0.33F +85C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Insulation resistance: Test conditions +60C 2C 95% 2% 500 hours Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Operating temperature range: -40 to +85C Related documents: IEC 60384-14; EN 60384-14. Rated voltage (VR): +40C 2C 93% 2% 56 days Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Climatic category: 40/85/56 IEC 60068-1 electrical characteristics L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% Winding scheme Test voltage between terminations (on all pieces): 1700Vac for 1 s + 2700Vdc for 1 s at +25C5C single sided metallized polypropylene film 2 sections 163 09/2008 R.47 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R475 APPROVALS Rated Cap. 520 Vac / 1000 Vdc Std dimensions B Od H L p Max dv/dt at 420Vdc Part Number (*) (V/ s) 4700 pF 4.0 9.0 13.0 10.0 0.6 750 R475F 1470 - - 01 - 6800 pF 5.0 11.0 13.0 10.0 0.6 750 R475F 1680 - - 01 - 8200 pF 6.0 12.0 13.0 10.0 0.6 750 R475F 1820 - - 01 - 0.010 F 6.0 12.0 13.0 10.0 0.6 750 R475F 2100 - - 01 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R475I 2100 - - 01 - 0.012 F 5.0 11.0 18.0 15.0 0.6 600 R475I 2120 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R475I 2150 - - 01 - 0.018 F 5.0 11.0 18.0 15.0 0.6 600 R475I 2180 - - 01 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R475I 2220 - - 01 - 0.027 F 6.0 12.0 18.0 15.0 0.6 600 R475I 2270 - - 01 - 0.033 F 6.0 12.0 18.0 15.0 0.6 600 R475I 2330 - - 01 - 0.039 F 7.5 13.5 18.0 15.0 0.6 600 R475I 2390 - - 01 - 0.047 F 7.5 13.5 18.0 15.0 0.6 600 R475I 2470 - - 01 - 0.047 F 6.0 17.5 18.0 15.0 0.6 600 R475I 2470 - - 02 - 0.047 F 9.0 12.5 18.0 15.0 0.6 600 R475I 2470 - - 03 - 0.056 F 8.5 14.5 18.0 15.0 0.6 600 R475I 2560 - - 01 - 0.068 F 10.0 16.0 18.0 15.0 0.8 600 R475I 2680 - - 01 - 0.068 F 7.5 18.5 18.0 15.0 0.8 600 R475I 2680 - - 02 - 0.068 F 13.0 12.0 18.0 15.0 0.8 600 R475I 2680 - - 03 - 0.082 F 10.0 16.0 18.0 15.0 0.8 600 R475I 2820 - - 01 - 0.10 F 11.0 19.0 18.0 15.0 0.8 600 R475I 3100 - - 01 - 0.047 F 6.0 15.0 26.5 22.5 0.8 300 R475N 2470 - - 01 - 0.047 F 6.5 13.5 26.5 22.5 0.8 300 R475N 2470 - - 02 - 0.068 F 6.0 15.0 26.5 22.5 0.8 300 R475N 2680 - - 01 - 0.10 F 7.0 16.0 26.5 22.5 0.8 300 R475N 3100 - - 01 - 0.12 F 8.5 17.0 26.5 22.5 0.8 300 R475N 3120 - - 01 - 0.15 F 10.0 18.5 26.5 22.5 0.8 300 R475N 3150 - - 01 - 0.18 F 10.0 18.5 26.5 22.5 0.8 300 R475N 3180 - - 01 - 0.22 F 11.0 20.0 26.5 22.5 0.8 300 R475N 3220 - - 01 - 0.27 F 13.0 22.0 26.5 22.5 0.8 300 R475N 3270 - - 01 - 0.33 F 13.0 22.0 26.5 22.5 0.8 300 R475N 3330 - - 01 - 0.15 F 9.0 17.0 32.0 27.5 0.8 225 R475R 3150 - - 01 - 0.18 F 9.0 17.0 32.0 27.5 0.8 225 R475R 3180 - - 01 - 0.22 F 9.0 17.0 32.0 27.5 0.8 225 R475R 3220 - - 01 - 0.27 F 9.0 17.0 32.0 27.5 0.8 225 R475R 3270 - - 02 - 0.33 F 11.0 20.0 32.0 27.5 0.8 225 R475R 3330 - - 02 - 0.39 F 11.0 20.0 32.0 27.5 0.8 225 R475R 3390 - - 01 - 0.47 F 13.0 22.0 32.0 27.5 0.8 225 R475R 3470 - - 01 - 0.56 F 13.0 22.0 32.0 27.5 0.8 225 R475R 3560 - - 01 - 0.68 F 14.0 28.0 32.0 27.5 0.8 225 R475R 3680 - - 01 - 0.82 F 18.0 33.0 32.0 27.5 0.8 225 R475R 3820 - - 01 - 1.0 F 18.0 33.0 32.0 27.5 0.8 225 R475R 4100 - - 01 - 1.2 F 18.0 33.0 32.0 27.5 0.8 225 R475R 4120 - - 01 - 1.5 F 22.0 37.0 32.0 27.5 0.8 225 R475R 4150 - - 01 - 0.47 F 11.0 22.0 41.5 37.5 1.0 150 R475W 3470 - - 01 - 0.56 F 11.0 22.0 41.5 37.5 1.0 150 R475W 3560 - - 01 - 0.68 F 13.0 24.0 41.5 37.5 1.0 150 R475W 3680 - - 01 - 0.82 F 16.0 28.5 41.5 37.5 1.0 150 R475W 3820 - - 01 - 1.0 F 16.0 28.5 41.5 37.5 1.0 150 R475W 4100 - - 01 - 1.2 F 19.0 32.0 41.5 37.5 1.0 150 R475W 4120 - - 01 - 1.5 F 19.0 32.0 41.5 37.5 1.0 150 R475W 4150 - - 01 - 1.8 F 20.0 40.0 41.5 37.5 1.0 150 R475W 4180 - - 01 - 2.2 F 20.0 40.0 41.5 37.5 1.0 150 R475W 4220 - - 01 - Class X2 File No. CA08.00101 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No. E97797 UL 1283 (440 Vac 110C) Electromagnetic Interference Filters File No. E85238 Approved according to IEC 60384-14 According to IEC 60065. (*)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) REEL O500mm Loose, short leads Loose, long leads Loose, long leads 04 +2 25 -1/+2 30 +5 00 50 40 Note: Ammo-pack is the preferred packaging for taped version. Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm 09/2008 ENEC IEC 60384-14 164