Replacement Cutting Blade for
Sheet Nibbler
Stock No. 547-789
The diagram above gives a view of the nibbler blade assembly. Firstly ensure that the handle
stop is released as shown. Slide the blade into the frame locating slot A around the lever pin
and align hole B with the pivot hole. Pass the pivot bolt through and screw it into the frame.
Lock the bolt with the pivot nut.
RS Components Issued July 1983 4544
A
B
C
D
E
F
GH
A. Blade
B. Pivot hole
C. Pivot bolt
D. Hole 'B'
E. Slot 'A'
F. Pivot nut
G. Lever pin
H. Handle stop
