S12-2 Emitter/Receiver Pair Photoelectric Sensor December 2013 Model Number * Type Range Output Type S12-2NAEL-2M Input Price N/A $ 21 Beam Inhibit $ 21 N/A Emitter S12-2NAEJ-2M S12-2ANRL-2M NPN/LO $ 26 20 m (65.6 ft) S12-2RNRL-2M NPN/DO Receiver $ 26 N/A S12-2APRL-2M PNP/LO $ 26 S12-2RPRL-2M PNP/DO $ 26 *Standard 2 m (6.5 ft) models are listed above. To order 3-pin (150 mm (6 in) pigtail with threaded Pico M8 connector models, replace the suffix "-2M" with "-Q3" (e.g. S12-2NAEL-Q3). The S12-2 series was developed as an economical emitter and receiver pair for long range detection of objects such as pallets and forklifts at doorway entrances. With a range of 20 m and a wide beam pattern in a small, compact housing (12 mm diameter, 30 mm long barrel), the S12-2 is a cost-effective, reliable solution. * Small 12 mm (0.47 inch) diameter tubular opposed mode sensor pair * Fully threaded barrel allows easy mounting to bracket or panel with included M12 nuts * Easy-to-see status LED indicators for Power ON, Output Overload, Signal Received, and Marginal Signal * Wide beam pattern makes sensor alignment easy at long ranges * Emitter beam inhibit to verify normal sensor operation before motion * Robust epoxy encapsulated electronics for reliable use in industrial environments * Carlo-Garvazzi PA12 series (metal) * Automation Direct DMR/E series (metal) * Monitoring Around Doors and Gates * Embedded sensing inside machines * Material Handling Literature * Datasheet 176293 Banner Engineering Corp. * 9714 Tenth Avenue North * Minneapolis, Minnesota 55441 Phone 763.544.3164 * Fax 763.544.0383 * www.bannerengineering.com