The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. SUMICON 1600 SERIES RECTANGULAR CONNECTORS are C case, CA case, CBA case, ST stopper, STA stopper, and STB stopper, By combining the many options noted above, the SUMICON 1600 series connectors meet a wide variety applications. The SUMICON 1600 series are multi-contact connectors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45 and 60-contact models available (same as the 1300 series). The connector units are available in three types: soldering, wrapping, and crimping. Accessories Standard Type General facilitate wiring connection. The SUMICON 1600 series are specified in the NTT specifications No.1931. In the SUMICON 1600 series, the connector unit is completely separated from the accessories such as the cases and stoppers to diversify the specificaions and Material and Finish Electrical Characteristics Part Material Finish Blue Item Standard Insulator Glass filled diallylphthalate resin Contact Resistance 7m max. at DC 1A Male Terminal Brass Insulation Resistance 1000M min. at DC 500V Female Terminal Phosphor bronze Plug Case ABS resinblack NTT spec: ABS resin, 2.5PB 6.0/2.0color Stopper Bracket Steel Nickel plating Withstand Voltage AC 1000V for 1 minute Current Rating 3A Voltage Rating 300V AC Type A: Silver-plated Type G: Gold-plated Wire Wrapping Specifications AWG 26 28 30 Applicable wiremm 0.41 0.32 0.26 Max. coating O.D.mm 0.95 0.75 0.6 Wrapping method Ordinary wrapping Coating one wrap Coating one wrap Effective number of wrappings about 8 about 8 about 9 Applicable wire Number of wrappings per terminal Ordering Information P W - 16 (1) (2) 34 (3) (4) (1) Shape of terminal opening P: Male terminal S: Female terminal (2) Terminal connection method No sign: Soldering W: Wrapping C: Crimp (3) Series No. 16: 1600 series (4) Number of contacts 34: 34 contacts (5) Serial sign for connctor units Provided with a sequence of upper-case alphabetic characters. No sign or sign other than W: Soldering Sequence: No sign, B, C, D, E ... (6) Plating A: Silver-plated G: Gold-plated (7) Signs for accessories 2 wrap A - C (5) (6) (7) (8) (9) C: Plug case ST: Stopper bracket with horizontal cable inlet opening J: Jack Case H: Handle DB: Deep bracket (8) Serial signs for accessories Each accessory (C, ST, J, H, DB) is provided with sequence of upper-case. alphabetic characters. Sequence: No sign, A, B, C... Accessories, C, ST, or J followed by no sign : Side lock types Accessories, C and ST followed By A: Top touch lock type Note: The space for no sign is filled sequentially. (9) Special specification, ( ) is filled with a serial number, except for the case and bracket, for which the following apply. (51): Bracket only (50): Case only 105 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Cross Reference to NTT No. Type Plug NTT No. Short Form HRS No. Part No. Type NTT No. Short Form HRS No. Part No. CN-3320GLWPMSA 20GLWPMSA CL216-0247-5-51 P-1620BA-CA51 CN-5445GJMSA 45GJMSA CL216-0257-9-51 P-1645BA-STA51 CN-4028GLWPMSA 28GLWPMSA CL216-0249-0-51 P-1628BA-CA51 CN-6760GJMSA 60GJMSA CL216-0258-1-51 P-1660BA-STA51 CN-4534GLWPMSA 34GLWPMSA CL216-0250-0-51 P-1634BA-CA51 CN-3320G2JMSA 20G2JMSA CL216-0292-0-51 PW-1620BA-STA51 CN-5445GLWPMSA 45GLWPMSA CL216-0251-2-51 P-1645BA-CA51 CN-3724G2JMSA 24G2JMSA CL216-0293-2-51 PW-1624BA-STA51 CN-6760GLWPMSA 60GLWPMSA CL216-0252-5-51 P-1660BA-CA51 CN-4028G2JMSA 28G2JMSA CL216-0294-5-51 PW-1628BA-STA51 CN-3320GLWPFSA 20GLWPFSA CL216-0153-3-51 P-1620A-CA51 CN-4534G2JMSA 34G2JMSA CL216-0296-0-51 PW-1634BA-STA51 CN-3724GLWPFSA 24GLWPFSA CL216-0154-6-51 P-1624A-CA51 CN-6760G2JMSA 60G2JMSA CL216-0298-6-51 PW-1660BA-STA51 CN-4028GLWPFSA 28GLWPFSA CL216-0155-9-51 P-1628A-CA51 CN-3320GJFSA 20GJFSA CL216-0151-8-51 S-1620A-STA51 CN-4534GLWPFSA 34GLWPFSA CL216-0126-0-51 P-1634A-CA51 CN-3724GJFSA 24GJFSA CL216-0148-3-51 S-1624A-STA51 CN-5445GLWPFSA 45GLWPFSA CL216-0127-3-51 P-1645A-CA51 CN-4028GJFSA 28GJFSA CL216-0152-0-51 S-1628A-STA51 CN-6760GLWPFSA 60GLWPFSA CL216-0128-6-51 P-1660A-CA51 CN-4028G2JFSA 28G2JFSA CL216-0313-8-51 SW-1628A-STA51 Receptacle CN-3724GJMSA 24GJMSA CL216-0254-0-51 P-1624BA-STA51 CN-4534G2JFSA 34G2JFSA CL216-0299-9-51 SW-1634A-STA51 Receptacle CN-4028GJMSA 28GJMSA CL216-0255-3-51 P-1628BA-STA51 CN-5445G2JFSA 45G2JFSA CL216-0300-6-51 SW-1645A-STA51 CN-4534GJMSA 34GJMSA CL216-0256-6-51 P-1634BA-STA51 CN-6760G2JFSA 60G2JFSA CL216-0301-9-51 SW-1660A-STA51 Note: NTT Types are all assembled with connector inserts and plug shells or stopper brackets. 106 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Soldering Eyelet Pin Connector Male Connector Solder Hole Unit: mm P-1634BA09 A Type G Type No. of Pin HRS No. Part No. HRS No. 8 12 16 CL216-0171-5-09 CL216-0172-8-09 CL216-0173-0-09 P-1608BA09 P-1612BA09 P-1616BA09 CL216-0180-6-09 CL216-0181-9-09 CL216-0182-1-09 P-1608BG09 25 19 P-1612BG09 30 24 P-1616BG09 35 29 10 13 10 18 10 23 8 8 8 20 24 CL216-0174-3-09 CL216-0175-6-09 P-1620BA09 P-1624BA09 CL216-0183-4-09 CL216-0184-7-09 P-1620BG09 33 27 P-1624BG09 37 31 13 21 13 25 11 11 YES 28 34 45 CL216-0176-9-09 CL216-0177-1-09 CL216-0178-4-09 P-1628BA09 P-1634BA09 P-1645BA09 CL216-0185-0-09 CL216-0186-2-09 CL216-0187-5-09 P-1628BG09 40 34 P-1634BG09 45 39 P-1645BG09 54 48 13 28 13 33 13 42 11 11 11 60 CL216-0179-7-09 P-1660BA09 CL216-0188-8-09 P-1660BG09 67 61 13 55 11 Part No. A B C D E RoHS Female Connector Solder Hole Unit: mm S-1634A09 A Type G Type No. of Pin HRS No. Part No. HRS No. Part No. A B C 8 CL216-0001-5-09 S-1608A09 CL216-0055-4-09 S-1608G09 25 19 10 13 8 12 16 CL216-0002-8-09 CL216-0003-0-09 S-1612A09 S-1616A09 CL216-0056-7-09 CL216-0057-0-09 S-1612G09 S-1616G09 30 35 24 29 10 18 10 23 8 8 20 24 28 CL216-0004-3-09 CL216-0005-6-09 CL216-0006-9-09 S-1620A09 S-1624A09 S-1628A09 CL216-0058-2-09 CL216-0059-5-09 CL216-0060-4-09 S-1620G09 S-1624G09 S-1628G09 33 37 40 27 31 34 13 21 13 25 13 28 11 11 YES 11 34 45 CL216-0007-1-09 CL216-0008-4-09 S-1634A09 S-1645A09 CL216-0061-7-09 CL216-0062-0-09 S-1634G09 S-1645G09 45 54 39 48 13 33 13 42 11 11 60 CL216-0009-7-09 S-1660A09 CL216-0063-2-09 S-1660G09 67 61 13 55 11 D E RoHS 107 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Wire Wrapping Pin Connector Male Connector Wrap Post 0.5x0.7 Unit: mm PW-1634BA09 A Type G Type No. of Pin HRS No. Part No. HRS No. 8 12 16 CL216-0198-1-09 CL216-0199-4-09 CL216-0200-1-09 PW-1608BA09 PW-1612BA09 PW-1616BA09 CL216-0216-1-09 CL216-0217-4-09 CL216-0218-7-09 PW-1608BG09 25 19 PW-1612BG09 30 24 PW-1616BG09 35 29 10 13 10 18 10 23 8 8 8 20 24 CL216-0201-4-09 CL216-0202-7-09 PW-1620BA09 PW-1624BA09 CL216-0219-0-09 CL216-0220-9-09 PW-1620BG09 33 27 PW-1624BG09 37 31 13 21 13 25 11 11 YES 28 34 45 CL216-0203-0-09 CL216-0204-2-09 CL216-0205-5-09 PW-1628BA09 PW-1634BA09 PW-1645BA09 CL216-0221-1-09 CL216-0222-4-09 CL216-0223-7-09 PW-1628BG09 40 34 PW-1634BG09 45 39 PW-1645BG09 54 48 13 28 13 33 13 42 11 11 11 60 CL216-0206-8-09 PW-1660BA09 CL216-0224-0-09 PW-1660BG09 67 61 13 55 11 Part No. A B C D E RoHS Female Connector Wrap Post 0.5x0.7 Unit: mm SW-1634A09 108 A Type G Type No. of Pin HRS No. Part No. HRS No. 8 12 16 CL216-0189-0-09 CL216-0190-0-09 CL216-0191-2-09 SW-1608A09 SW-1612A09 SW-1616A09 CL216-0207-0-09 CL216-0208-3-09 CL216-0209-6-09 SW-1608G09 25 19 SW-1612G09 30 24 SW-1616G09 35 29 10 13 10 18 10 23 8 8 8 20 24 CL216-0192-5-09 CL216-0193-8-09 SW-1620A09 SW-1624A09 CL216-0210-5-09 CL216-0211-8-09 SW-1620G09 33 27 SW-1624G09 37 31 13 21 13 25 11 11 YES 28 34 45 CL216-0194-0-09 CL216-0195-3-09 CL216-0196-6-09 SW-1628A09 SW-1634A09 SW-1645A09 CL216-0212-0-09 CL216-0213-3-09 CL216-0214-6-09 SW-1628G09 40 34 SW-1634G09 45 39 SW-1645G09 54 48 13 28 13 33 13 42 11 11 11 60 CL216-0197-9-09 SW-1660A09 CL216-0215-9-09 SW-1660G09 67 61 13 55 11 Part No. A B C D E RoHS 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Side Touch Lock Type Plug Shell Unit: mm P-1634A-C50 No. of Pin HRS No. Part No. A B C D E F G H RoHS 8 CL216-0028-1-50 P-1608A-C50 29 20 14.5 42 7.5 7.5 12.5 12.5 12 16 20 CL216-0029-4-50 CL216-0030-3-50 CL216-0031-6-50 P-1612A-C50 34 20 14.5 43.5 7.5 9 13.5 13.5 P-1616A-C50 39 20 14.5 46 7.5 11.5 14.5 14.5 P-1620A-C50 37 23 17.5 45.5 11 11 14.5 14.5 24 28 34 CL216-0032-9-50 CL216-0033-1-50 CL216-0034-4-50 P-1624A-C50 41 23 17.5 46.5 11 12 15 15 YES P-1628A-C50 44 23 17.5 47.5 11 13 15.5 15.5 P-1634A-C50 49 23 17.5 50.5 11 16 17 17 45 60 CL216-0035-7-50 CL216-0036-0-50 P-1645A-C50 58 23 17.5 54.5 11 19 18.5 19.5 P-1660A-C50 71 23 17.5 59.5 11 24 21 22 Note: All these products are plug cases only. Order connector units separately. The cases can be used for both male and female connector units. The cases marked with an asterisk are of standard specifications. Side Touch Lock Type Receptacle Bracket Unit: mm P-1634A-ST51 No. of Pin HRS No. Part No. A B C D E RoHS 8 12 CL216-0046-3-51 CL216-0047-6-51 P-1608A-ST51 27 19 13.6 9.2 15.5 P-1612A-ST51 32 24 13.6 9.2 15.5 16 20 24 CL216-0048-9-51 CL216-0049-1-51 CL216-0050-0-51 P-1616A-ST51 37 29 13.6 11 15.5 P-1620A-ST51 35 27 16.6 11 18.5 P-1624A-ST51 39 31 16.6 11 18.5 YES 28 34 CL216-0051-3-51 CL216-0052-6-51 P-1628A-ST51 42 34 16.6 11 18.5 P-1634A-ST51 47 39 16.6 11 18.5 45 60 CL216-0053-9-51 CL216-0054-1-51 P-1645A-ST51 56 48 16.6 15 18.5 P-1660A-ST51 69 61 16.6 15 18.5 Note: All these products are stopper brackets only. Order connector units separately. The cases can be used for both male and female connector units. The brackets marked with an asterisk are of standard specifications. 109 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Top Touch Lock Type Plug Shell Unit: mm P-1634A-CA50 No. of Pin HRS No. Part No. A B C D E E E RoHS 20 24 CL216-0149-6-50 CL216-0147-0-50 P-1620A-CA50 37 20 P-1624A-CA50 41 20 51 11 11 18 14.5 51 11 12 18.5 15 28 34 CL216-0150-5-50 CL216-0111-3-50 P-1628A-CA50 44 20 P-1634A-CA50 49 20 53 11 13 20 15.5 YES 56 11 16 21.5 17 45 60 CL216-0112-6-50 CL216-0113-9-50 P-1645A-CA50 58 20 P-1660A-CA50 71 20 60 11 19 24 18.5 65 11 24 26.5 21 Note: All these products are plug cases only. Order connector units separately. The cases can be used for both male and female connector units. The cases marked with an asterisk are of standard specifications. Side Touch Lock Type Receptacle Bracket Unit: mm P-1634A-STA51 110 No. of Pin HRS No. Part No. A B RoHS 20 CL216-0156-1-51 P-1620A-STA51 33 27 24 28 34 CL216-0157-4-51 CL216-0158-7-51 CL216-0123-2-51 P-1624A-STA51 37 31 P-1628A-STA51 40 34 YES P-1634A-STA51 45 39 45 60 CL216-0124-5-51 CL216-0125-3-51 P-1645A-STA51 54 48 P-1660A-STA51 67 61 Note: All these products are stopper brackets only. Order connector units separately. The cases can be used for both male and female connector units. The brackets marked with an asterisk are of standard specifications. 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Side Touch Lock Type Jack Shell (For Extension Cable) Unit: mm S-1634A-J50 No. of Pin HRS No. Part No. A B C D E F G 20 24 28 CL216-0139-2-50 CL216-0140-1-50 CL216-0141-4-50 S-1620A-J50 37 23 17.5 45.5 11 S-1624A-J50 41 23 17.5 46.5 11 S-1628A-J50 44 23 17.5 47.5 11 11 14.5 14.5 12 15 15 13 15.5 15.5 34 45 CL216-0142-7-50 CL216-0225-2-50 S-1634A-J50 49 23 17.5 50.5 11 S-1645A-J50 58 23 18.5 54.5 11 16 17 17 19 18.5 19.5 60 CL216-0226-5-50 S-1660A-J50 71 23 18.5 59.5 11 24 21 H RoHS YES 22 Note: All these products are jack cases only. Order connector units separately. The cases can be used for female connector units only. Top Touch Lock Type Stopper Bracket Unit: mm 1645STA-DC No. of Pin HRS No. Part No. A 20 24 28 CL216-0321-6 CL216-0322-9 CL216-0323-1 1620STA-DC 1624STA-DC 1628STA-DC 38.3 42.3 45.3 34 45 CL216-0324-4 CL216-0325-7 1634STA-DC 1645STA-DC 50.3 59.3 60 CL216-0326-0 1660STA-DC 72.3 RoHS YES 111 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. SHOULDER-TOUCH LOCK TYPE General The shoulder-touch lock type plug cases are highly reliable, lightweight, sturdy, and operable. 8, 12, and 16-contact models are available. Hirose high-density packging plug cases, including the top-touch lock type, are available in 8 to 60-contact models. Material and Finish Description Material Finish Plug case Polypropylene resin Black Stopper Steel Nickel plating Plug Case Unit: mm 1616-CBA50 No. of Pin HRS No. 8 12 16 Part No. A B C D E F RoHS CL216-0416-0-50 1608-CBA50 14 35 40 45 CL216-0417-3-51 CL216-0418-6-50 1612-CBA51 14 1616-CBA50 14 40 45 41 46 9 7.5 YES 42 47 11.5 7.5 7.5 Note: Order connector units separately. The cases can be used for both male and female connector units.The cases marked with an asterisk are of standard specifications. Stopper How to Mount Connector Unit Stopper M2.6 Screw Panel 1600-STB05 Note: Mounted on a connector unit (Each package contains two stoppers) 112 HRS No. Part No. Remark RoHS CL216-0302-1-05 1600-STB05 Common for any size YES Note: Order connector units separately. The cases maked with an asterisk are of standard specifications. 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1600 SUMICON CRIMP TYPE CONNECTORS General The SUMICON 1600 series are high-performance compact crimp type connectors developed for labor saving in connection work. 8, 12, 16, 20, 24, 34, 45 and 60contact models are available. All models are compatible with our previous top-lock type plig cases. For using the connectors separately, easy-to-mount plastic locks are available to expand their functions. Orderig Information Item Standard Contact Resistance 7m or less at DC 1Acontact only Insulation Resistance 5,000M or more at DC 500V Withstand Voltage AC 1,000V for 1minute Rating Current 3A Applicable Cable Crimping strength Unit: kg or more Part Material Finish Insulator Glass-containing polycarbonate resin UL94V-0 Blue Male Terminal Brass Gold-plated Silver-Plated Female Terminal Phosphor bronze Gold-plated Silver-Plated AWG24-28Coating O.D. 1.6-0.9 Cable AWG24 AWG26 AWG28 Crimping force 3.6 2.4 1.6 Features 1. Since this is a press-fit type connector, anyone can performe wiring securely with high reliability. 2. For contact, a two-point contact system is employed for outstanding reliability, It asiso offers superior mechanical strength. 3. The Sumicon 1600 Series Press-Fit Type Connectors are interchangeable with the conventional solder, DIP and lapping type connectors. They are applicable, therfore, to a wider range of applications. 4 To use connector unit separately, jointly employing an easily installable plastic lock will prevent vibrations and/or cable dead weight from unplugging the connector. The plastic lock, moreover, can be used with either center-suspension or panel-mount system. 5 All wiring spliced with the connector is hidden completely inside the housing, allowing for perfect insulation. 113 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Housing Unit: mm HRS No. No. of Pin Part No. L P W CL216-0335-0 CL216-0336-3 8 12 PC-1608 PC-1612 25 30 19 24 CL216-0337-6 CL216-0338-9 16 20 PC-1616 PC-1620 35 33 CL216-0339-1 CL216-0340-0 CL216-0341-3 24 28 34 PC-1624 PC-1628 PC-1634 CL216-0342-6 CL216-0343-9 45 60 PC-1645 PC-1660 RoHS Unit: mm HRS No. No. of Pin Part No. L P W 10 10 CL216-0344-1 CL216-0345-4 8 12 SC-1608 SC-1612 25 30 19 24 10 10 29 27 10 13 CL216-0346-7 CL216-0347-0 16 20 SC-1616 SC-1620 35 33 29 27 10 13 37 40 45 31 34 39 13 13 13 CL216-0348-2 CL216-0349-5 CL216-0350-4 24 28 34 SC-1624 SC-1628 SC-1634 37 40 45 31 34 39 13 13 13 54 67 48 61 13 13 CL216-0351-7 CL216-0352-0 45 60 SC-1645 SC-1660 54 67 48 61 13 13 YES RoHS YES Contact Male Contact Type Loose Chain Female Contact HRS No. Part No. Plating CL216-0331-0 CL216-0332-2 CL216-0363-6 PC-1600-111 PC-1600-112 PC-1600-211 Gold Silver Gold CL216-0364-9 PC-1600-212 Silver RoHS Type Loose YES Chain HRS No. Part No. Plating CL216-0331-0 CL216-0332-2 CL216-0363-6 PC-1600-111 PC-1600-112 PC-1600-211 Gold Silver Gold CL216-0364-9 PC-1600-212 Silver RoHS YES Note: Loose-piece terminals are available in packs. Each pack contains 100 terminals. Strip terminals are available in reels. Each reel contains 10,000 terminals. 114 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Tools Type HRS No. Part No. Manual crimping tool CL250-0003-1 TC-1600-111 Contact extractor CL250-0004-4 TC-1600-21 Hand Crimp Tool TC-1600-111 Contact Extractor TC-1600-21 Ordering Informations Housing C - 16 Contact No. of contact Series No. Crimp type P: Male, S: Female C - 1600 1: Gold-plated 2: Silver-plated Applicable cable 1: AWG24-28 1: Loose piece contact 2: Strip contact Series No. Crimp type P: Male contact S: Female contact Using the Connectors (1) Take care when removing the connectors to pull out by the housing and not tug on the wires. (2) The male terminals of the connectors will be bent if the connectors are twisted when being removed. Take care to pull the characters out straight. (3) The plastic locks are sufficiently strong to ensure that the connector engagement will not be loosened by vibration or the weight of the wires. Their strength is not sufficient for other loads. When strngth for some other load is required, use the top-touch lock type plug case (common for both solder and wrapping types). (4) Both gold-plated and silver-plated terminals are available. Use the gold-plated type in adverse environments. In other environments. we recommend the economical silver-plated type. (5) For crimping, use a manual crimping device for low-volume crimping and maintenance. For highvolume crimping. we recommend the automatic crimping machine shown on page 124. (6) For plug-in uses, we recommend Sumicon 1600 series solder or wrapping types for improved functionality. 115 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Assembling Procedure Pin contact housing Low-numbered side Male contact Wire m 5m t 3. u o ab Female contact Low-numbered side Crimped state Socket contact housing After assembling, pull the wire slightly and make sure if the contact is mounted as shown above. Procedure for Contact Extraction In case of extracting a contact from the housing due to insertion error or circuit change, follow the steps as shown below. Fig. 1 Fig. 2 Extraction Shell 1 Hold the Contact Extractor as shown in Fig. 1, placing the tip of the Extractor on the tip of a contact, then insert it between the contact and the housing. 2. When the tip of the Extractor comes into contact with a stepped part in the housing, the spring will come off from the stepped part with a snap which can be felt. Then, extract the contact by pulling the wire. 116 0. (Caution: Pushing the tip of the extractor forcibly before the spring has come off from the stepped part may damage the contact). 3. Above Fig. 1 and Fig. 2 show how to extract a contact from socket housing. The same procedure can be employed to extract a contact from pin housing. 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Use of Connectors with Respect to Polarity (to prevent mis-insertion of connectors) Polarization of SUMICON 1600 series can be achieved by contact arrangement. The crimp type contacts are designed to float a little, so that the use of a Polarizing Key is recommended in order to ensure positive polarizatiom. In Case of 8, 12 and 16 contact 1. When crimp types are used in both the male and female, do not fill all cavities with contacts. Use Polarizing Key at minimum 2 cavities of Socket housing as shown below and do not fill pin contacts at the corresponding cavities of male housing. 2. When male crimp type is used in combination with solder or wire wrap female type, the connector coupling shall be done corefully not to couple in reverse position. Couplimg shall be made by matching of traiangle marks on connector inserts. In case of Multi Pin Type more than 20 contact 1. SUMICON 1600 series are naturally polarized in all cavities filled with contacts. When all cavities are not filled, Polarizing Keys shall be inserted in vacant cavities to the minimum for preventing reverse coupling. But when Top Touch Lock Plug Shell is used, Polarizing Keys are not necessary because Plug Shell has polarized mechanism. 2. When male crimp type is used with some vacant cavities in combination with solder or wire wrap female type, Top Touch Lock Plug Shell is recommended. 117 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Handle Unit: mm No. of Pin HRS No. Part No. A B C D 16 34 CL216-0135-1-50 CL216-0136-4-50 1616-H50 1634-H50 36 46 25 30 6 6 29 39 YES RoHS 60 CL216-0137-7-50 1660-H50 68 30 8 61 1634-H50 Deep Bracket Unit: mm No. of Pin HRS No. Part No. RoHS 34 CL216-0138-0 1634-DB YES 1634-DB Crimp or any Connector Unit How to Mount HRS No. Part No. RoHS CL216-0354-5 1600-LC YES Molding 1600-LC Common for solder, wire wrap, crimp or any connector unit Polarizing Key HRS No. Part No. RoHS CL216-0487-9 Polarizing Key YES How to Mount Molding Polarizing Key 118 The polarizing key (material: SC-16 ) can be used for any type of female housing. For handling, see Notes on connector polarity (prevention of misinsertion on 124page of this manual. 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Terminal Arrangment and Numbers The figure shows a male connector as viewed from the termination side 8 pin 12 pin 16 pin 20 pin 24 pin 28 pin 34 pin 45 pin 60 pin Connector Mounting Hole Dimensions Unit: mm No. of Contact A B C 8 12 19 24 13.5 18.5 8.5 8.5 16 20 29 27 23.5 21.5 11.5 11.5 24 28 34 31 34 39 25.5 28.5 33.5 11.5 11.5 11.5 45 60 48 61 42.5 55.5 11.5 11.5 screw M2.6 119 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. SUMICON 1600 SERIES DIP SOLDERING CONNECTORS General The SUMICON 1600 series are original Hirose rectangular dip soldering connectors 8, 12, 16, 20, 24, 34, 45 and 60-contact models are available. All models are compatible with the previous 1600 series in mounting and accessories. Features 3. Further cuts interconnection costs when simple locks are used. 4. A wide variety of combinations of connection methods available, e.g., dip soldering, wrapping, and crimping, to meet your requirements. 1. Allows straight dip soldering onto a PCB, and is effective in PCB-to-PCB and PCB-to-cable connection. 2. Suitable for use in interface, being compact and lightweight and meeting high-density packaging requirements. Main Applications Computers, peripherals and terminals, data communications equipment, measuring instruments, signal equipment, mobile radio equipment, copier, and FAX machine. Electrical and Environmental Performance Material and finish Contact Resistance 7m or less at DC 1A Insulation Resistance 1,000M or higher at DC 500V Withstand Voltage AC 1,000V for 1 minute Current capacity 3A Insulator Glass-Filled diallylphtalate resin Male Terminal Bress Female Terminal Phosphor bronze Type A: Silver-plated Type B: Gold-plated Orderig Information P D - 16 (1) (2) (3) A - SP 09 34 (4) (5) (6) (1) Shape of terminal opening P: Male terminal S: Female terminal (2) Terminal connection method D: Dip soldering (3) Series No. 16: 1600 series (4) Number of contacts (5) Serial sign for connctor units Provided with a sequence of upper-case alphabetic characters. Sequence: No sign, B, C, D, E ... (7) (8) (9) (6) Plating A: Silver plated B: Gold plated (7) Signs for accessories SP: Spacer for dip soldering (8) Serial signs for accessories Each accessory is provided with a sequence A of upper-case alphabetic characters. Sequence: No sign, A, B ... (9) Specification (09) : Standard 121 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Dip Soldering Type Connector Male Connector Dip Post 0.5x0.5 Unit: mm PD-1634BA09 A Type G Type No. of Pin HRS No. Part No. HRS No. 8 12 CL216-0388-7-09 CL216-0389-0-09 PD-1608BA09 PD-1612BA09 CL216-0406-7-09 CL216-0407-0-09 PD-1608BG09 25 19 PD-1612BG09 30 24 10 13 10 18 8 8 16 20 CL216-0390-9-09 CL216-0391-1-09 PD-1616BA09 PD-1620BA09 CL216-0408-2-09 CL216-0409-5-09 PD-1616BG09 35 29 PD-1620BG09 33 27 10 23 13 21 8 11 24 28 34 CL216-0392-4-09 CL216-0393-7-09 CL216-0394-0-09 PD-1624BA09 PD-1628BA09 PD-1634BA09 CL216-0410-4-09 CL216-0411-7-09 CL216-0412-0-09 13 25 13 28 13 33 11 YES 11 11 45 60 CL216-0395-2-09 CL216-0396-5-09 PD-1645BA09 PD-1660BA09 CL216-0413-2-09 CL216-0414-5-09 PD-1624BG09 37 31 PD-1628BG09 40 34 PD-1634BG09 45 39 PD-1645BG09 54 48 PD-1660BG09 67 61 13 42 13 55 11 11 C E RoHS Part No. A B C D E RoHS Female Connector Dip Post 0.5x0.5 Unit: mm SD-1634A09 122 A Type G Type No. of Pin HRS No. Part No. HRS No. 8 12 16 CL216-0379-6-09 CL216-0380-5-09 CL216-0381-8-09 SD-1608BA09 SD-1612BA09 SD-1616BA09 CL216-0397-8-09 CL216-0398-0-09 CL216-0399-3-09 SD-1608BG09 25 19 SD-1612BG09 30 24 SD-1616BG09 35 29 10 13 10 18 10 23 8 8 8 20 24 CL216-0382-0-09 CL216-0383-3-09 SD-1620BA09 SD-1624BA09 CL216-0400-0-09 CL216-0401-3-09 SD-1620BG09 33 27 SD-1624BG09 37 31 13 21 13 25 11 11 YES 28 34 45 CL216-0384-6-09 CL216-0385-9-09 CL216-0386-1-09 SD-1628BA09 SD-1634BA09 SD-1645BA09 CL216-0402-6-09 CL216-0403-9-09 CL216-0404-1-09 SD-1628BG09 40 34 SD-1634BG09 45 39 SD-1645BG09 54 48 13 28 13 33 13 42 11 11 11 60 CL216-0387-4-09 SD-1660BA09 CL216-0405-4-09 SD-1660BG09 67 61 13 55 11 Part No. A B D 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Dip Spacer HRS No. Part No. Application CL216-0419-9 D-1600-SPA Connector unit packing applicable for models with any number of contacts CL216-0420-8 D-1600-SPB For packing with Connector unit stopper applicable for models with any number of contacts Mounting screws must be supplied by the customer Pin connectors Socket connector Pin connectors without Brackets D-1600-SPA Socket connector without Brackets D-1600-SPA P.C.B P.C.B NutM2.6x0.45 ScrewM2.6x0.45x12 NutM2.6x0.45 ScrewM2.6x0.45x12 D-1600-SPA Male connector with side-lock type stopper bracket Female connector with side-lock type stopper bracket Male connector with ST Female connector with ST D-1600-SPB D-1600-SPB P.C.B P.C.B NutM2.6x0.45 NutM2.6x0.45 ScrewM2.6x0.45x12 ScrewM2.6x0.45x12 Male connector with top-touch-lock type stopper bracket Female connector with top-touch-lock type stopper bracket Male connector with ST Female connector with ST D-1600-SPB D-1600-SPB D-1600-SPB P.C.B P.C.B NutM2.6x0.45 NutM2.6x0.45 ScrewM2.6x0.45x12 ScrewM2.6x0.45x12 Note 1: The connector unit packaging spacerSPAcannot be used for packing with the connector unit stopper bracket. Note 1: The packaging spacer with connector unit stopper bracketSPBcannot be used for packaging the connector unit. Note 2: Provide two spacersSPA and SPBfor each connector unit. The dimensions marked with an asteriskare for PCBs of 1.6mm in thickness. How to use connectors 1. When disconnecting, pull it as straight as possible, because the male pins might be damaged if it is twisted. 2. Connctors are available with gold to be used in adverse environmental conditions and silverplated pins be used in ordinary conditions. 123 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Recommended Dip Soldering Pattern of Connector mm When dip soldering the connectors to a PCB, drill holes as shown below. The figures indicate the number of contacts. Signs indicate the V-shaped mark (direction of the connector unit) on the mating face of the connector unit. Recommended Dip Soldering Pattern of Pin Connector (View of the connector-mounting surface of substrate) PD-1608 PD-1612 PD-1620 PD-1624 PD-1634 124 PD-1616 PD-1628 PD-1645 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. PD-1660 Recommended PC Board Hole Pattern Socket Connector SD-1608 SD-1620 SD-1612 SD-1624 SD-1616 SD-1628 125 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. SD-1634 SD-1645 SD-1660 mm Recommended Mounting Hole 126 No. of Pin A B C 8 19 13.5 8.5 12 24 18.5 8.5 16 29 23.5 8.5 20 27 21.5 11.5 24 31 25.5 11.5 28 34 28.5 11.5 34 39 33.5 11.5 45 48 42.5 11.5 60 61 55.5 11.5 Applicable Screw M2.6 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Function Chart 1 Plan Lock Polarizing Key CA Shell Top-Touch Lock Crimp Pin Contact Crimp Socket Contact *STA Stopper Bracket Crimping C Shell Male Housing Female Housing Side-Touch Lock ST Stopper Bracket Soldering Eyelet Pin Insert Socket Insert CBA Shell Wire Wrapping Shoulder-Touch Lock STB Stopper Bracket Pin Insert Socket Insert Handle Straight Dip Soldering Pin Insert Socket Insert 127 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. SUMICON 1600 SERIES RIGHT-ANGLE DIP SOLDERING CONNECTORS (MALE) General The SUMICON 1600 series are Hirose right-angle dip soldering connectors (male). All models are compatible with the existing soldering type, wrapping type, crimping tpe, and straight dip soldering type connectors including their accessories. 20, 28, 34 and 60-contact models are available. Features 1. Direct dip soldering on a PCB enables convenient parallel connection with cable plugs. 2. Suitable as an interface, being lightweight and capable of high-density packaging. 3. Further cuts interconnection costs by using crimping type plugs with plastic locks for simple cable connection, so no cases are needed. 4. A wide variety of connection methods available, e.g., dip soldering, wrapping, and crimping, to meet your requirements. 5. Available with or without a top-touch lock type bracket and side-lock type bracket, offering you many choices for your applications. 6. Highly solvent-resistant, using insulating materials with high heat resistance and chemical-resistance. Main Applications Electronic equipment such as computers, peripherals and terminals, control equipment, and measuring instruments. Electrical and Environmental Electrical Characteristics Material and Finish Contact Resistance 3A Insulation Glass-Filled diallylphthalate resin Blue Contact Resistance AC 300V Contact Brass Type A: Silver-plated Type B: Gold-plated Contact Resistance 10m or less at DC 1A Right Angle Polybutylenephthalate resin BlueUL94V-0 Contact Resistance 100M or higher at DC 500V Stopper Bracket Steel Nickal plating Contact Resistance 1,000Vr.m.s. for 1 minute 129 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ordering Information P R - 16 (1) (2) (3) 34 A - STA R 50 B (4) (5) (6) (7) (8) (9) (6) Plating A: Silver-plated B: Gold-plated (7) Accessories ST: Side-lock type stopper bracket STA: Top-touch type stopper bracket (8) R: Indicates a connector on which the STA bracket is mounted in the reverse direction against the standard. (the standard refers to the direction in which both marks on the STA bracket and connector unit are in the direction). (9) Specification (50) : RoHS compliant (1) Shape of terminal opening P: Male terminal (2) Terminal connection method R: Right-angle dip soldering (3) Series No. 16: 1600 series (4) Number of contacts (5) Serial sign for connctor units Provided with a sequence of upper-case alphabetic characters. Right Angle Dip Soldering Pin Connectors With Stopped Bracker for Top-Touch Lock Plug Shell Dip post 0.5x0.5 Unit: mm PR-1634BA-STA50 A Type No. of Pin HRS No. Part No. 20 CL216-0448-7-50 PR-1620BA-STA50 27 33 36 28 34 60 CL216-0450-9-50 CL216-0451-1-50 CL216-0453-7-50 PR-1628BA-STA50 PR-1634BA-STA50 PR-1660BA-STA50 34 40 39 45 61 67 43 YES 48 70 A B C RoHS Gold plated type are available options. 130 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. With Stopper Bracket for Side-Touch Lock Plug Shell Unit: mm Dip Post 0.5x0.5 No. of Pin 20 PR-1634BA-ST50 Type A A B C PR-1620BA-ST50 27 35 36 PR-1628BA-ST50 PR-1634BA-ST50 PR-1660BA-ST50 34 39 61 42 47 69 43 48 70 HRS No Part No. CL216-0455-2-50 CL216-0457-2-50 28 CL216-0458-2-50 34 CL216-0460-2-50 60 Gold plated type are available options RoHS Connector Unit Only Without Bracket Unit: mm Dip Post 0.5x0.5 No. of Pin PR-1634BA50 20 28 Type A HRS No Part No. A B C CL216-0461-5-50 CL216-0463-0-50 PR-1620BA50 PR-1628BA50 27 34 33 40 36 43 PR-1634BA50 PR-1660BA50 39 61 45 67 48 70 34 CL216-0464-3-50 60 CL216-0466-9-50 Gold plated type are available options RoHS 131 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. With Stopper Bracket for Top Touch Lock Plug Shell in Reverse Position Unit: mm Dip Post 0.5x0.5 No. of Pin PR-1634BA-STAR50 Type A A B C PR-1620BA-STAR50 27 33 36 PR-1628BA-STAR50 PR-1634BA-STAR50 34 39 40 45 43 48 PR-1660BA-STAR50 61 67 70 HRS No Part No. 20 CL216-0495-7-50 28 34 CL216-0497-2-50 CL216-0498-5-50 60 CL216-0500-5-50 RoHS Gold plated types are available options. Note: When this type is used mounting direction of socket insert in plug shell shall be in reverse position against the triangle mark on plug shell. How to Use (Example) With Top Touch Lock Bracket Connector Mounting Side Top Touch Lock Plug Shell PCB Cable 132 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. How to Use Right Angle Dip Soldering Connectors Unit: mm 1. The standard use of this to mount it on the left side of a vertical PC board. (Fig. 1) PCB Mark No. of pin Right Angle Connector Leftt Side of PCB Pin No. Connector Mounting Side Dip Soldering Side PCB PCB Fig. 1 Unit: mm 2. It is possible to mount it on the right side of PCB but special caution is necessary to be opposite all pin locations on dip soldering surface. (Fig. 2) Connector Mounting Side Pin No. Right Angle Connector No. of pin Mark Right Side of PCB Dip soldering Side Pin No. PCB Fig. 2 133 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3. When Top Touch Lock Type Plug Shell and Stopper Bracket are used with mounts on the right side of a PCB, not only the pin locations become opposite, but also the Lock Release Button and Cable Exit are upside down. So, the Reverse Mount Stopper Bracket is conveniet in such case. (Fig. 3) Connector Mounting Side Lock Release Button Mark Mark Right Side of PCB PCB Top Touch Kock Plug Shell Socket Insert Fig. 3 Plug Connector Connector with Reverse Mount Stopper Bracket Right Angle Connector with Reverse Mount Stopper Bracket 4. M2.6 screws are recommended to mount Right Angle Dip Soldering Pin Connectors. 5. Please choose PC board thinner than 2.4mm. 6. In extracting plug connector, please pull it up straight out to prevent male pin from bending. 7. The standard plating is silver but gold is also an available option. 8. Note: The dip soldering pattern on PCB of Right Angle Type and Straight Type are different from each other. 9. Before using a solvent other than trichloroethylene, chlorosene, methanol, isopropanol, or ethyalchol to wash soldered connectors, contact out engineering department. 134 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Recommended Dip Soldering Pattern Unit: mm hole hole Pin No. Pin No. PCB End PCB End hole Pin No. Pin No. PCB End PCB End Note 1. The triangle mark represents the position of the same mark on the connector unit. 2. Above pattern is shown view direction of the connector mounting side. 135 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Recommended Mounting Pattern Unit: mm For insertion-soldering in the PCB, drill mounting holes as shown in the figure below. Post hole max. max. 2-M2.6 hole Pin No. PCB End Connector With top-touch-lock type stopper bracket PCB End max. max. hole Pin No. PCB End Connector With side-lock type stopper bracket hole max. max. Post hole Pin No. PCB End Connector No. of pin A 20 27 28 34 34 39 60 61 Connector Unit Type The triangle mark represents the position of the same mark on the connector unit. Above pattern is shown from view direction of the conector mounting side. 136 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Function Chart 2 Plain Lock Crimp Socket Contact (only for the combination with Right Angle Dip Connector Unit) CA shell Top-Touch Lock Crimping Dip STA *Right-Angle stopper bracket Female Housing Soldering Eyelet C shell Socket Insert Side-Touch Lock Right-Angle Dip ST stopper bracket Wire Wrapping Socket Insert Straight-Dip Soldering Right-Angle Dip Connector Unit Socket Insert Dust cap is available for STA stopper bracket. 137 04/2009