Data Sheet SLR-325 Series Features Viewing angle 2 1/2 : 40 Lead pitch 5mm Color Type V D Y M Specifications Viewing angle 2 1/2 / 40 Part No. : Standard Chip Structure SLR-325VC SLR-325DC Red GaAsP on GaP SLR-325YC SLR-325MC Yellowish Green GaP 60 75 25 GaAsP on GaP Orange GaP Yellowish Green 630 2 20 Red SLR-325YY SLR-325MG Orange Yellow SLR-325VR SLR-325DU Absolute Maximum Ratings (Ta25) Electrical and Optical Characteristics (Ta25) Emitting Forward Voltage VF Reverse Current IR Dominant Wavelength Luminous Intensity IV Power Forward Peak Forward Reverse Operating Storage Color Dissipation Current Current Voltage Temperature Temperature Max. Min. Typ. D PD(mW) IF(mA) IFP(mA) VR(V) Topr() Tstg() Typ.(V) IF(mA) (A) VR(V) Typ.(nm) IF(mA) (mcd) (mcd) IF(mA) 605 2.1 60 1 3 -25 to +85 -30 to +100 10 10 20 75 25 Yellow 16 9 25 3.6 10 587 2.2 6.3 572 5.6 16 572 3 10 630 2 60 5.6 587 605 2.1 10 1:Duty1/5, 200Hz SLR-325 series are only available as straight lead types Recommended Solder Pattern Viewing Angle 3.8 Dimensions 1.0 0.1 2.0 6.0 3.2 (deg) SCANNING ANGLE Directivity (deg) 30 20 10 0 10 20 40 5.5 50 50 2.5 or 5.0 Diffused Clear 30 40 60 60 70 70 80 80 18Min. 90 100 50 0 50 RELATIVE INTENSITY (%) 90 100 RELATIVE INTENSITY (%) 0.4 5.0 Cathode Tolerance : 0.2 unit : mm www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. unit : mm 1/3 2010.12 - Rev.A SLR-325 Series Electrical Characteristics Curves Forward Current-Forward Voltage Ta=25C FORWARD CURRENTIF (mA) 50 10 SLR-325VC SLR-325VR SLR-325DC SLR-325DU SLR-325YC SLR-325YY SLR-325MC SLR-325MG 1.0 0.1 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGEVF (V) RELATIVE LUMINOUS INTENSITY (a.u.) Luminous Intensity-Atmosphere Temperature IF=10mA 1.4 1.2 1.0 SLR-325VC SLR-325VR SLR-325DC SLR-325DU SLR-325YC SLR-325YY SLR-325MC SLR-325MG 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURETa (C) RELATIVE LUMINOUS INTENSITY (a.u.) Luminous Intensity-Forward Current Ta=25C 10 SLR-325VC SLR-325VR SLR-325DC SLR-325DU SLR-325YC SLR-325YY SLR-325MC SLR-325MG 1 0.1 0.1 1 10 100 FORWARD CURRENTIF (mA) MAXIMUM FORWARD CURRENTIF Max. (mA) Derating 30 20 SLR-325VC SLR-325VR SLR-325DC SLR-325DU SLR-325YC SLR-325YY SLR-325MC SLR-325MG 10 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURETa (C) www.rohm.com 100 (c) 2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.12 - Rev.A SLR-325 Series Rank Reference of Brightness Red (V) Ta=25C, IF10mA E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (21/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 3 Circular type (Direct mount 5mm pitch type) 40 SLR-325VC Transparent Colored SLR-325VR Diffused Colored Orange (D) Ta=25C, IF10mA E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness angle (mcd) 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to (21/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 3 Circular type (Direct mount 5mm pitch type) 40 SLR-325DC Transparent Colored SLR-325DU Diffused Colored Yellow (Y) Ta=25C, IF10mA E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (21/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 3 Circular type (Direct mount 5mm pitch type) 40 SLR-325YC Transparent Colored SLR-325YY Diffused Colored Green (M) Ta=25C, IF10mA E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (21/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 3 Circular type (Direct mount 5mm pitch type) 40 Transparent Colored SLR-325MC SLR-325MC Diffused Colored Brightness on specification sheet include tolerance of within 10%. Part No. Construction S L R 3 2 5 Series name Package type V Y Emitting Color Resin Color Red:630nm R D Orange:605nm Y T 3 1 C U Yellow:587(590)nm M Yellowish-Green:572(563)nm Y G C Rank sign (Brightness Rank) Taping specifications <Red> Diffused Colored <Orange> Diffused Colored <Yellow> Diffused Colored <Green> Diffused Colored Transparent Colored M (3F) 1-Element straight bulk T See taping specifications Concerning the Brightness rank * Please refer to the rank chart above for luminous intensity classification. * Part name is individual for each rank. * When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A