3MTM PC Card Header Dual Slot, Low Profile, Integrated Ejector MCH Series Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See Regulatory Information Appendix (RIA) for chemical compliance information ED * * * * * * TS-1113-C Sheet 1 of 3 U Date Modified: August 8, 2008 Insulation Material: LCP Insulation Flammability: UL 94V-0 Insulation Color: Black TI N Physical N Contact Material: Copper Alloy Plating Underplating: 50 [ 1.27 m ] Nickel O Plating Wiping Area: Gold flash over 27 [ 0.68 m ] PdNi Plating Solder Tails: 100 [ 2.54 m ] Tin/Lead or Reflowed Tin (See Ordering Information) IS C Mechanical: Electrical D Durability-Office Environment: 10,000 cycles minimum Insertion Force: 8.8 lbs. ( 39.2 N ) maximum Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum Current Rating: 0.5 A Insulation Resistance: > 5 x 109 at 500 VDC Withstanding Voltage: 500 VRMS for 1 Minute Environmental Temperature Rating: -20C to +60C, 95% RH Non-condensing Process Temperature: 260C (per J-STD-020C) Operating Environment: UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM PC Card Header Dual Slot, Low Profile, Integrated Ejector MCH Series Left Ejector Option 2 .0 1 8 5 1 .2 6 1.2 4 0 31 .5 0 1 .24 0 3 1 .5 0 .2 2 3 5 .6 6 .1 1 8 3 .0 0 .0 6 5 1 .6 5 A .3 01 7 .65 .4 8 2 1 2 .2 4 A 3 .2 9 4 8 3 .6 7 2 .5 40 6 4 .52 CL O F C A R D 2 .8 3 5 7 2 .0 1 2 .3 2 0 5 8 .9 3 U 3 .9 5 7 1 0 0 .5 1 ED 2 .6 7 7 6 8 .0 0 TI N .3 5 0 8 .8 9 STRO KE PC CARD O U T L IN E N 2 .0 1 6 5 1 .2 1 1.2 4 0 31 .5 0 1 .4 1 7 3 5.9 9 O .2 1 8 5 .5 4 IS C .4 3 3 1 1 .0 0 P IN 1 P IN 3 5 P IN 1 7 P IN 5 1 1 .24 0 3 1 .5 0 S T A N D -O F F H E IG H T TO TAL COM PONENT H E IG H T P IN 3 4 P IN 6 8 2 .1 3 4 5 4 .2 0 CL PCB TO B O TTO M C E N T E R L IN E .1 3 8 3 .5 1 P IN 6 7 CL D PCB TO TOP C E N T E R L IN E P IN 3 6 CL CLCL .0 5 0 1 .2 7 45 u5v 1 .6 5 0 4 1 .9 1 .1 1 8 .0 1 0 3.0 0 0 .2 5 P L A S T IC P E G .13 5 3 .4 3 S O L D E R C L IP Ordering Information MCH - 136TAX - 24 LPK X - XX Ejector Options L1 =Left Ejectors, Oval Buttons R1 = Right Ejectors, Oval Buttons LR1 = Top Left /Bottom Right Ejectors, Oval Buttons RL1 = Top Right/Bottom Left Ejectors, Oval Buttons 3M Interconnect Solutions http://www.3M.com/interconnects/ Keying Blank = 5.0 volt 3 = 3.3 volt Plating Suffix: TR30 = PdNi w/ Au Flash and Sn-Pb Solder Tails (RIA E3 & C2 apply) LL = PdNi w/ Au Flash and Sn Solder Tails (RIA E1 & C1 apply) TS-1113-B Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM PC Card Header Dual Slot, Low Profile, Integrated Ejector R MCH Series .030 0.76 .117 .010 2.97 0.25 .137 .004 3.48 0.10 DETECT PINS .167 .004 4.24 0.10 GENERAL USE PINS .440 11.18 .590 .515 14.99 13.08 .365 9.27 .290 7.37 .385 9.78 .215 5.46 .140 3.56 .065 1.65 .095 2.41 SECTION A-A Stand-off Height Total Component Height MCH-136TAX24LPXX-XX .275 [ 7.00 ] .808 [ 20.53 ] PCB to Bottom Mating Center Line PCB to Top Mating Center Line .382 [ 9.71 ] .690 [17.53] TI N U Part Description ED .197 .004 5.00 0.10 POWER PINS 2.480 62.99 PIN 1 TOP PIN 2 TOP PIN 35 TOP PIN 36 TOP N 2.018 51.26 IS C .149 3.78 PIN 33 TOP PIN 34 TOP PIN 67 TOP PIN 68 TOP PIN 33 BOTTOM PIN 34 BOTTOM PIN 67 BOTTOM PIN 68 BOTTOM ---B--- D .250 6.35 2.540 64.52 1.650 41.91 O PIN 1 BOTTOM PIN 2 BOTTOM PIN 35 BOTTOM PIN 36 BOTTOM ---A--- .150 3.81 .328 8.33 .050 1.27 .002 2X O .087 2.21 0.05 THRU-HOLE l O .002 M A M B .002 136X .039 0.99 0.05 THRU-HOLE l O .002 M A M B STAND-OFF FOOTPRINT NO COMPONENTS .240 6.10 2.000 50.80 2.320 58.93 .075 1.90 TYP .400 10.16 .002 2X O .087 2.21 0.05 PLATED THRU-HOLE l O .002 M A M B INSERT CARD RECOMMENDED MOUNTING HOLE LAYOUT SHOWN ON CONNECTOR SIDE OF BOARD TS-1113-B Sheet 3 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. ED Appendix E2: European Union RoHS TI N U Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. O Appendix E3: European Union RoHS N In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. IS C Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. D In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 TI N U ED Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. N The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. D IS C O Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007