S4H3 Frequency Range (min) Insertion Loss (max) VSWR (max) Isolation (min) Switching speed (max) CW RF power, operating (max) 0.01 - 1 1.5 1.5 80 250 1 NOTES: DC Bias: (Standard) +5V +/-0.5V @ 160mA max -15V +/-3V @ 50mA max DC Bias: (-5 option) +5V +/-0.5V @ 200mA max -5V +/-0.5V @ 60mA max DC Bias: (-12 option) +15V +/-3V @ 160mA max -15V +/-3V @ 50mA max Control: (Standard) TTL 0 = Low Loss TTL 1 = Isolation SWITCH SINGLE-POLE, FOUR-THROW ABSORPTIVE GHz dB ratio dB nsec W MECHANICAL SPECIFICATIONS: Case Style: S4 Outline (Standard logic) S4-2 Outline (Two-bit logic) Finish: Gold plate per MIL-G-45204 Connectors: SMA Female per MIL-C-39012 Bias & Control Pins: o0.02" x 0.15" long Weight: 60g max Mounting: o0.10" through holes (2) places E1 controls J2 - J1 E2 controls J3 - J1 E3 controls J4 - J1 E4 controls J5 - J1 Absorptive switch: Internal 50 terminations at J2, J3, J4 and J5 (in isolation mode). Two-bit control: (-2 option) E2 E1 Low loss path 0 0 J2 - J1 0 1 J3 - J1 1 0 J4 - J1 1 1 J5 - J1 Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off). ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55C to +85C Storage Temp: -65C to +125C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D J3 SCREENING: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. J3 J4 J4 ACC DC: WWYY SN: 0000 J5 J2 DC: WWYY SN: 0000 N E /C N 2 E1 /C G G -V -V J1 J5 +V +V E E 4 E 3 E1 2 J2 ACC J1 OUTLINE CASE STYLE S4 OUTLINE CASE STYLE S4-2 PART NUMBER ORDERING INFORMATION: Add "-RC" suffix: RoHS-compliant Add "-5" suffix: +/-5V DC supplies Add "-5-RC" suffix: +/-5V DC supplies, RoHS-compliant Add "-12" suffix: +/-12V to 18V DC supplies Add "-12-RC" suffix: +/-12V to 18V DC supplies, RoHS-compliant Add "-2": Two-bit logic control Add "-2-RC" suffix: Two-bit logic control, RoHS-compliant Add "-2-5" suffix: Two-bit logic control, +/-5V DC supplies Add "-2-5-RC" suffix: Two-bit logic control, +/-5V DC supplies, RoHS-compliant Add "-2-12" suffix: Two-bit logic control, +/-12V to 18V DC supplies Add "-2-12-RC" suffix: Two-bit logic control, +/-12V to 18V DC supplies, RoHS-compliant Add "-H" suffix: Hermetic seal (does not apply to RoHScompliant models) 1209 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com