PL IA N T SinglFuseTM SF-0603FP Series Features M n Fast acting precision thin film chip fuse for *R oH S CO overcurrent protection n 1608 (EIA 0603) miniature footprint n Surface mount packaging for automated LE AD FR EE assembly n UL listed (UL 248-14) n RoHS compliant* and halogen free** SF-0603FP Series - Fast Acting Precision Surface Mount Fuses Model Rated Current (Amps) SF-0603FP050 0.50 SF-0603FP063 SF-0603FP080 SF-0603FP100 SF-0603FP125 SF-0603FP150 SF-0603FP160 SF-0603FP200 SF-0603FP250 SF-0603FP300 SF-0603FP315 SF-0603FP400 SF-0603FP500 0.63 0.80 1.00 1.25 1.50 1.60 2.00 2.50 3.00 3.15 4.00 5.00 Ro VE LEA HS RS D CO ION FRE M SA E PL R IA E NT * Electrical Characteristics Fusing Time Open within 5 sec. at 200 % rated current Resistance Tolerance 25 % Rated Voltage (m) *** 260 218 132 84.5 63 50.5 46 32 25.5 20 19 13 10 DC 50 V DC 32 V Breaking Capacity Typical I2t (A2s) **** DC 50 V 50 A 0.088 DC 32 V 50 A 0.0125 0.0206 0.0211 0.0472 0.0623 0.0817 0.1176 0.1807 0.3177 0.3615 0.5348 0.7726 *** Resistance value measured with less than 10 % of rated current. Tolerance 25 %. ****Typical I2t value measured at 10x rated current. Reliability Testing Parameter Requirement Test Method Carrying Capacity...................................... No fusing.....................................................Rated current, 4 hours Fusing Time............................................... Within 5 seconds.........................................200 % of its rated current Interrupting Ability...................................... No mechanical damages............................After the fuse is interrupted, rated voltage applied for 30 seconds again Bending Test.............................................. No mechanical damages............................Distance between holding points: 90 mm, Bending: 3 mm,1time, 30 seconds Resistance to Solder Heat......................... 20 %..........................................................260 C 5 C,10 seconds 1 second Solderability............................................... 95 % coverage minimum............................235 C 5 C, 2 0.5 second 245 C 5 C, 2 0.5 second (lead free) Temperature Rise...................................... <75 C........................................................100 % of its rated current, measure of surface temperature Resistance to Dry Heat............................. 20 %..........................................................105 C 5 C,1000 hours Resistance to Solvent................................ No evident damage on protective...............23 C 5 C of isopropyl alcohol, 90 seconds coating and marking Residual Resistance.................................. 10k ohms or more.......................................Measure DC resistance after fusing Thermal Shock.......................................... DR < 10 %...................................................-20 C / +25 C /+125 C /+25 C, 10 cycles UL File Number..........................................E198545 http://www.ul.com/ Follow link to Online Certificates Directory, then enter UL File No. E198545, or click here Environmental Characteristics Operating Temperature...................................................................................-20 C to +105 C Storage Conditions Temperature.................................................................................................+5 C to +35 C Humidity...........................................................................................................40 % to 75 % Shelf Life........................................................................... 2 years from manufacturing date Moisture Sensitivity Level......................................................................................................... 1 ESD Classification (HBM).............................................................................................. Class 6 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 520 390 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. "SinglFuse" is a trademark of Bourns, Inc. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SinglFuseTM SF-0603FP Series Applications n Portable memory n Cell phones n LCD monitors n Rechargeable battery packs n Disk drives n Battery chargers n PDAs n Set top boxes n Digital cameras n Industrial controllers 250 n DVDs Peak: 250 +0/-5 C TEMPERATURE (C) 230 C or higher 200 SF-0603FP Series - Fast Acting Precision Surface Mount Fuses Solder Reflow Recommendations 150 180 C PRE-HEATING ZONE 150 C 90 30 Seconds 100 250 30 10 Seconds Peak: 250 +0/-5 C SOLDERING ZONE 230 C or higher TEMPERATURE (C) 50 200 150 HEATING TIME PRE-HEATING ZONE 180 C PEAK: 250 +0/-5 C, 5 seconds PRE-HEATING ZONE: 150 to 180 C, 90 30 seconds SOLDERING ZONE: 230 C or higher, 30 10 seconds 150 C 90 30 Seconds 100 30 10 Seconds 1.6 0.1 (.063 .004) 0.7 to 0.9 (.028 to .035) SOLDERING ZONE 50 HEATING TIME 0.8 to 1.0 (.031 to .039) 0.8 0.1 (.031 .004) PEAK: 250 +0/-5 C, 5 seconds PRE-HEATING ZONE: 150 to 180 C, 90 30 seconds Product Dimensions SOLDERING ZONE: 230 C or higher, 30 10 seconds 1.6 0.1 (.063 .004) 0.3 0.2 (.012 .008) 0.3 0.2 (.012 .008) 0.7 to 0.9 (.028 to .035) 0.45 0.1 (.018 .004) 1.6 0.1 (.063 .004) 0.8 0.1 (.031 .004) 0.8 0.1 (.031 .004) 0.35 0.2 (.014 .008) 0.35 0.2 (.014 .008) 0.3 0.2 (.012 .008) 0.3 0.2 (.012 .008) 0.3 0.2 (.012 .008) 0.45 0.1 (.018 .004) Thermal Curve 0.35Derating 0.2 0.35 0.2 (.014 .008) PERCENT OF RATING (%) 120 0.35 0.2 (.014 .008) (.014 .008) (.079 to .087) 0.7 to 0.9 (.028 to .035) 0.8 to 1.0 (.031 to .039) 2.0 to 2.2 (.079 to .087) 0.3 0.2 (.012 .008) DIMENSIONS: 0.45 0.1 PACKAGING: 5,000 pcs./reel (.018 .004) Recommended Pad Layout 2.0 to 2.2 0.8 to 1.0 (.031 to .039) 2.0 to 2.2 (.079 to .087) MM (INCHES) Construction & Material Content 0.35 0.2 (.014 .008) OVERCOAT 110 Sn PLATING 100 FUSE ELEMENT 90 CERAMIC SUBSTRATE 80 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE (C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Cu / Ni PLATING SF-0603FP Series - Fast Acting Precision Surface Mount Fuses Average Time Current Curves 1.50 A 1.25 A 1.00 A 0.80 A 0.63 A 0.50 A Minimum I2T V Clear Time Curves 5.00 A 1.60 A 2.00 A 2.50 A 3.00 A 3.15 A 4.00 A 5.00 A 100 100 4.00 A 3.15 A 3.00 A 2.50 A 2.00 A 1.60 A 1.50 A 1.25 A JOULE INTEGRAL (A2 SEC) 10 CLEARING TIME (S) 10 1 1.00 A 0.80 A 0.63 A 0.50 A 1 0.1 0.1 0.01 0.01 0.001 0.1 10 1 100 0.001 0.001 CURRENT (A) Typical Part Marking Represents total content. Layout may vary. 0.01 0.1 How to Order SF - 0603 FP 050 - 2 SinglFuseTM Product Designator SMD Footprint 1608 (EIA 0603) size RATED CURRENT (A) F = 0.50 S = 2.00 I = 0.63 T = 2.50 K = 0.80 3 = 3.00 L = 1.00 U = 3.15 M = 1.25 W = 4.00 P = 1.50 Y = 5.00 N = 1.60 1 CLEARING TIME (S) Fuse Blow Type FP = Fast acting precision Rated Current 050-500 (500 mA - 5.00 A) Packaging Type - 2 = Tape & Reel (5,000 pcs./reel) REV. B 09/17 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SF-0603FP Series Tape and Reel Specifications SF-0603FP Series per EIA 481-2 Tape Dimensions W 8.0 0.2 (.315 .008) P0 4.0 0.1 (.157 .004) P1 4.0 0.1 (.157 .004) P2 2.0 0.05 (.079 .002) A 1.1 0.1 (.043 .004) B 1.9 0.1 (.075 .004) F 3.5 0.05 (.138 .002) E 1.75 0.1 (.069 .004) 1.5 + 0.1/-0 (.059 + .004/-0) D0 0.64 0.1 (.025 .004) T Reel Dimensions 180 +0/-3.0 (7.087 +0/-.118) A 60.0 (2.362) B Min. C 13.0 1.0 (.512 .039) W 9.0 1.0 (.354 .039) T 11.4 2.0 (.449 .079) T DIMENSIONS: MM (INCHES) W BOTTOM TAPE A DIA. C DIA. DO PO E TOP TAPE B B DIA. PAPER TAPE RESISTOR TAPE T F A P1 P2 DIRECTION OF UNREELING Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. W