232
ALUMINUM ELECTROLYTIC CAPACITORS
CAT.8100E
Frequency coefficient
Cap.(μF)
U
1
P
2
V
3
1
4
E
5
4
6
7
7
0
8
M
9
G
10
D
11
Configuration
Capacitance tolerance (±20%)
Rated capacitance (47µF)
Rated voltage (25V)
Series name
Type
390
220
150
100
68
47
33
22
15
10
0.68
0.47
0 0.5 0.6 0.7 0.8 0.9 1.0
300Hz 1kHz120Hz
φD
P
φd
5
2.0
0.5
6.3
2.5
0.5
8
3.5
0.6
φ D
5
Pb-free leadwire
Pb-free PET sleeve
FD
6.3 · 8 GD
Configuration
(mm)
L+1.5MAX. 15MIN 4MIN
Sleeve (P.E.T.) φd
φD+0.5MAX.
P±0.5
Pressure
relief vent
(φ6.3up )
UPV Miniature Sized, Low Impedance,
High Reliability
Miniature sized low impedance series withstanding 5000 hours load life at +105°C.
Compliant to the RoHS directive (2011/65/EU).
Radial Lead Type
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem
–55 to +105°C
6.3 to 50V
0.47 to 390µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
Printed with white color letter on dark brown sleeve.
After storing the capacitors under no load at
105˚C for 1000 hours and then performing voltage
treatment based on JIS C 5101-4 clause 4.1 at
20°C, they shall meet the specified values for the
endurance characteristics listed at right.
UPV
Long Life
Capacitance change
Leakage current
tan δ
Within ± 20% of the initial capacitance value
Less than or equal to the initial specified value
150% or less than the initial specified value
Type numbering system (Example : 25V 47µF)
Measurement frequency : 120Hz at 20°C
Measurement frequency : 120Hz
Capacitance change
Leakage current
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 5000 hours at 105°C.
tan δ
Within ± 30% of the initial capacitance value
Less than or equal to the initial specified value
300% or less than the initial specified value
Rated voltage (V)
tan δ (MAX.)
6.3
0.22
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
Z–55°C / Z+20°C
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
6.3
5
10
5
16
4
25
3
35
3
50
2
• Frequency coefficient of
rated ripple current
(10kHz to 200kHz=1)
Dimension table in next page.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
UPJ