SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105C KRG @Low profile : F4B7mm to F18B25mm @Endurance : 105C 1000 hours @Solvent-proof type (see PRECAUTIONS AND GUIDELINES) downsized KMA downsized low profile KME ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105C 6.3 to 50Vdc P20% (M) (at 20C, 120Hz) I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.28 0.24 0.20 0.16 0.14 0.12 tanE (Max.) When nominal capacitance exceeds 1000MF, add 0.03 to the value above for each 1000MF increase. (at 20C, 120Hz) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 2 2 2 3 4 5 Z(-25C)/Z(+20C) 3 3 4 6 8 10 Z(-40C)/Z(+20C) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change [P25% of the initial value [P20% of the initial value D.F. (tanE) [200% of the initial specified value [200% of the initial specified value Leakage current [The initial specified value [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C without voltage applied. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change [P25% of the initial value [P20% of the initial value D.F. (tanE) [200% of the initial specified value [200% of the initial specified value Leakage current [The initial specified value [The initial specified value Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life FP0.5 FP0.5 FD' Fd Sleeve FP0.5 ?DIMENSIONS (Radial Lead Type=VB) [mm] or L' 15min. 4min. (F4 to F10) Vent (F10 and larger) (F12.5 to F18) Gas escape end seal 4 6.3 10 & 12.5 fD 5 7 8 7L 0.45 0.45 0.45 0.45 fd 0.5 0.5 0.6 0.6 ]9L 5.0 F 1.5 2.0 2.5 2.5 3.5 fD' FD+0.5max. L' L+1.5max. (7L : L+1.0max.) 16 & 18 0.8 7.5 ?PART NUMBERING SYSTEM KRG 6.3 VB 1000 M J09 Capacitance 0.1MF 0.47MF 1.0MF 4.7MF 10MF 100MF Case code Cap tolerance (P20%) Nominal cap code Radial lead type Rated voltage in volts Series name Code R1 R47 1 4R7 10 100 ?CASE CODE fD (mm) L (mm) 4 5 6.3 7 8 10 12.5 16 18 7 D07 E07 F07 G07 9 12.5 13 15 20 25 K13 K15 L15 M15 M20 M25 E09 F09 H09 J09 J12 (1/2) CAT. No. E1001D SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105C ?STANDARD RATINGS Vdc mF 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 6.3 10 16 25 35 Case size FDBL (mm) Rated ripple current (mArms) at 105C, 120Hz 5B9 93 154 5B9 6.3B9 6.3B9 175 10B9 365 16B15 18B15 18B20 Note : 1,010 1,190 1,440 272 445 690 940 1,120 1,330 1,700 8B9 10B12.5 12.5B15 16B15 18B15 18B20 18B25 75 121 5B9 6.3B9 205 251 290 515 830 1,050 1,260 1,560 8B9 8B9 10B9 12.5B13 16B15 18B15 18B20 18B25 10B9 10B12.5 12.5B15 18B15 18B20 18B25 270 370 590 970 1,220 1,470 67 8B9 10B9 10B12.5 12.5B13 16B15 18B20 155 235 340 415 720 1,110 50 5B9 5B9 5B9 5B9 5B9 5B9 6.3B9 6.3B9 10B9 10B12.5 12.5B13 16B15 18B20 12 18 22 27 46 61 80 95 170 290 370 535 830 Use next higher voltage part. ?STANDARD RATINGS Vdc mF 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 Note : 6.3 10 16 25 35 50 Case size FDBL (mm) Rated ripple current (mArms) at 105C, 120Hz 4B7 5B7 35 5B7 6.3B7 6.3B7 50 6.3B7 80 53 68 97 4B7 5B7 6.3B7 6.3B7 30 46 63 71 5B7 6.3B7 6.3B7 36 57 64 4B7 4B7 4B7 4B7 4B7 4B7 4B7 4B7 6.3B7 6.3B7 1.3 2.9 3.5 5 10 15 18 25 44 57 Use next higher voltage part. ?RATED RIPPLE CURRENT MULTIPLIERS @Frequency Multipliers Capacitance (mF) Frequency (Hz) 0.1 to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 (2/2) CAT. No. E1001D