Silicon Junction FETs (Small Signal) 2SJ0163 (2SJ163) Silicon P-Channel Junction FET For general switching Complementary to 2SK1103 Unit: mm 0.40+0.10 -0.05 0.16+0.10 -0.06 1.90.1 Unit VGDS 65 V Drain current ID -20 mA Gate current IG -10 mA Allowable power dissipation PD 150 mW Channel temperature Tch 150 C Storage temperature Tstg -55 to +150 C 10 1.1+0.2 -0.1 Ratings Gate to Drain voltage 1.1+0.3 -0.1 Symbol 2.90+0.20 -0.05 0 to 0.1 Parameter 0.40.2 (0.65) 2 1 (0.95) (0.95) Absolute Maximum Ratings (Ta = 25C) 5 1.50+0.25 -0.05 Low ON-resistance Low-noise characteristics 2.8+0.2 -0.3 3 Features 1: Source 2: Drain 3: Gate JEDEC: TO-236 EIAJ: SC-59 Mini3-G1 Package Marking Symbol (Example): 4M Electrical Characteristics (Ta = 25C) Parameter Symbol Drain to Source cut-off current IDSS * Gate to Source leakage current IGSS VGS = 30 V, VDS = 0 Gate to Drain voltage VGDS IG = 10 A, VDS = 0 Gate to Source cut-off voltage VGSC VDS = -10 V, ID = -10 A Forward transfer admittance | Yfs | VDS = -10 V, ID = -1 mA, f = 1 kHz Drain to Source ON-resistance RDS(on) VDS = -10 mV, VGS = 0 Input capacitance (Common Source) Ciss Reverse transfer capacitance (Common Source) Crss * Conditions VDS = -10 V, VGS = 0 VDS = -10 V, VGS = 0, f = 1 MHz min typ - 0.2 max Unit -6 mA 10 nA 65 V 1.5 1.8 3.5 V 2.5 mS 300 12 pF 4 pF IDSS rank classification Runk O P Q R IDSS (mA) - 0.2 to -1 - 0.6 to -1.5 -1 to -3 -2.5 to -6 Marking Symbol 4MO 4MP 4MQ 4MR Note) The part number in the parenthesis shows conventional part number. Publication date: January 2002 SJF00001BED 1 2SJ0163 ID VDS -4.0 175 -3.5 150 -3.0 100 75 50 -2.5 VGS = 0 V -2.0 -1.5 0.2 V -1.0 0.4 V 0.6 V - 0.5 25 20 40 60 80 100 120 140 160 0 Ambient temperature Ta (C) -2 | Yfs | VGS -1.0 - 0.5 -4 -6 -8 -10 0 -12 0 | Yfs | ID 2.5 2.0 1.5 1.0 0.5 1.0 0.5 Gate to source voltage VGS (V) 0 3 12 10 8 6 4 2 0 -2 -4 -6 -8 -10 Drain current ID (mA) SJF00001BED 4 5 Ciss, Coss, Crss VDS VDS = -10 V f = 1 kHz Ta = 25C 14 0 1.5 2 24 -12 Input capacitance (Common source), Output capacitance (Common source), Reverse transfer capacitance (Common source) Ciss,Coss,Crss (pF) Forward transfer admittance |Yfs| (mS) VDS = -10 V f = 1 kHz Ta = 25C 1 Gate to source voltage VGS (V) 16 3.0 0 2.0 -1.5 Drain to source voltage VDS (V) 4.0 3.5 -2.0 0.8 V 0 0 Forward transfer admittance |Yfs| (mS) VDS = -10 V -2.5 Drain current ID (mA) 125 0 2 ID VGS -3.0 Ta = 25C Drain current ID (mA) Allowable power dissipation PD (mW) PD T a 200 f = 1 MHz VGS = 0 Ta = 25C 20 16 Ciss 12 8 4 Coss Crss 0 -1 -3 -10 -30 -100 Drain to source voltage VDS (V) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR