Signal Relays AXICOM IM - C Relay n n n n n n n Minimum board-space 60 mm2 Slim line 10x6mm (0.39x0.24") and low profile 5.65mm (0.222") Switching power 60W/62.5VA Switching voltage 220VDC/250VAC Switching current 4A Bifurcated contacts High mechanical shock resistance IM_C Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment Approvals UL 508 File No. E 111441 Rev. M Contact Data108-98001 (continued) AXICOMESignalERelays IM Relay Technical data of approved types on request Contact Data Contact Data standard U C UL contact rating IM-C Mechanical IM-Dendurance IM-E 30VDC, 2A, 60W, NO only 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 125VAC, 0.5A, 62.5W 250VAC, 0.25A, 62.5W 108 operations standard high dielectric version version IM-A IM-B Contact arrangement 1 Form C (CO) 1EPoleEmake Number of contacts and type 1EPoleEbreak 1EPoleEE 2EPoleEbreak 2EPoleEmake changeover Max. switching voltage 220VDC, 250VAC Contact assembly BifurcatedEcontacts Rated current 4A 4A Coil Data Contact material Limiting continuous current 3A 3A Palladium-ruthenium,Egold-covered Magnetic system monostable, bistable Limiting continuous current 2EA 4EA Coil voltage 2EA range 2EA Switching power 60W,2EA 62.5VA 1.5 to 24VDC at max. ambient temperature Contact material PdRu temperature 125C. Maximum switching current 2EA 2EA 3EA Max. coil 2EA 2EA Au covered Thermal resistance <150K/W Maximum swichting voltage 220EVdc 250EVac Contact style twin contacts Maximumcontact switching load capacity 60EW,E62.5EVA Min. recommended 100V/1A Coil versions, standard version, monostable, 1 coil potential <E10EVCoil Initial contact Thermoelectric resistance <50m at 10mA/ 30mV Rated Operate Release Coil Rated coil switching voltage 100EV code ThermoelectricMinimum potential <10V voltage set voltage min voltage resistance power Initial contact resistance / < 100 max. m < 100 m NO < 100 m < 50 m VDC < 50 m VDC Operate time typ. 1ms, 3ms VDC 10% mW measuring condition: 10 mA / 20 mV Release time Electrical 01 3 2.25 0.30 64 140 CC0 Contact category 0 endurance ( 30 mV / 10 mA) min.E2.5ExE106Eoperations without diode in parallel typ. 1ms, max. 3ms 02 4.5 3.38 0.45 145 140 cable load open end min.E2.0ExE106Eoperations with diode in parallel typ. 3ms, max. 5ms 03 5 3.75 0.50 178 140 Resistive load at 125 Vdc / 0.24 A - 30 W Bounce time max. typ. 1ms, max. 5ms 06 12 9.00 1.20 1029 140 min.E5ExE105Eoperations at 220 Vdc / 0.27 A - 60 W 5 min.E1ExE10Eoperations Electrical endurance 07 24 18.00 2.40 2880 140 at 250 Vac / 0.25 A - 62.5 min.E1ExE105Eoperations All figures are given for coil without pre-energization, at ambient temperature +23C at contact application 0 VA min.E5ExE105Eoperations at 30 Vdc / 1 A - 30 Wmin. 2.5x106 operations min.E1ExE105Eoperations ( 30mV / 10mA) at 30 Vdc / 2 A - 60 W cable load open end min. 2.0x106 operations Mechanical endurance typ.E108Eoperations resistive, 125VDC / 0.24A 30W min. 5x105 operations range, standard version UL contact ratings 220 Vdc / 0.24Coil A - 60 operating W 5 125 Vdc / 0.24 A - 30 W resistive, 220 VDC / 0.27A - 60W min. 1x10 operations 250 Vac / 0.25 A - 62.5 VA resistive, 250VAC / 0.25A - 62.5VA min. 1x105 operations 125 Vac / 0.5 A - 62.5 VA resistive, 30VDC / 1A - 30W min. 5x105 operations 30 Vdc / 2 A - 60 W resistive, 30VDC / 2A - 60W min. 1x105 operations Max. DC Load Breaking Capacity Max. DC load breaking capacity DC Voltage [Vdc] resistive load DC current [A] All specifications subject to change. Consult Tyco Electronics for latest specifications. 09-2017, Rev. 0917 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. 21 of 28 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 U3.2 rel. min. 4.4 0.2 0 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 5.4 70 80 T1 T2 D1 D2 Tw S 3. 3. 0.4 0.4 5.080.1 90 10 0 1 10 7.50.3 12 0 Ambient Temperature [C] 2.20EE0.15 5.4 0.40 0.75 N/A T1 0.200EE0.004 T2 7.50EE0.30 N/A 5.08EE0.10 5.08EE0.10 3.20EE0.15 3.20EE0.15 2.20EE0.15 2.20EE0.15 0.400.4 0.75N/A 5.080.1 0.126EE0.006 D1 0.087EE0.006 D2 0.015 Tw 0.029 S 7.50.3 Mounting HoleSignal Layout Relays Mounting Hole Layout 3.4 View onto 3.2 3 2.8 140mW coil the component 200mW coil Umax. at 2x1A 2.6 Coil Voltage [U/Unom] N/A 0.4 5.08EE0.10 3.2 4.4 3.20EE0.15 Solder Pad Layout 7.50EE0.30 0.295EE0.011 4.4 3.2 7.50.3 5.08EE0.10 0.200EE0.004 5.4 3.20EE0.15 0.126EE0.006 Coplanarity 0.1mm 2.20EE0.15 0.087EE0.006 0.4 0.015 N/A N/A Coplanarity 0.1mm Solder Pad Layout AXICOM side of onto the PCB (top view) side of the View onto component side of onto the PCB (top view) side View the component PCB (topthe view) View the component IM - C Relay (Continued) Umax. at 0A 2.4 0.295EE0.011 N/A 0.200EE0.004 0.200EE0.004 0.126EE0.006 0.126EE0.006 0.087EE0.006 0.087EE0.006 0.015 0.015 N/A 0.029 2.2 Umax. at 0A 2 1.8 1.6 Umax. at 2x2A 1.4 Coil Data 1.2 (continued) U nominal coil voltage nom. 1 0.8 Coil versions, bistable 1 coil 0.6 0.4 Urel. min. Coil Rated Set Reset 0.2 code voltage Voltage 0 voltage -40 -30 -20 -10 0 10 20 30 40 50 60 70 -50 VDC VDC VDC Ambient Temperature [C] 41 3 2.25 -2.25 80 Coil resistance 90 100 110 120 10% 90 Rated coil power mW 100 Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g Weight max. 0.75g Other Data (continued) Resistance to soldering heat THT Peak Value IEC 60068-2-20 265C/10s Resistance to soldering heat SMT IEC 60068-2-58 265C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 U . - 5%coil U .-5%coil duty at related only to SMT relays duty at 0A(100mW) 2x2A (100mW) packed in orginal dry-packs U .-5%coil Terminal Assignment Terminal Assignment Ultrasonic cleaning not recommended duty at 0A (200mW) Packaging/unit Relay - top view Relay - top view U . -5% coil THT version tube/50pcs., box/1000 pcs. duty at 2x1A (100mW) SMT version reel/1000 50001pcs. Non-Latching Type Latching Type, 1 Coil pcs., box/1000 Non-Latching Type LatchingorType, Coil Coil Voltage [U/Unom] Coil operating range, bistable 1 coil 3.4 3.2 3 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 max max Umax. - 100% coil duty at 0A (100mW) max Umax. - 100% coil duty at 0A (200mW) max Unom. nominal coil voltage not energized condition Uset min. not energizedTerminal conditionassignment reset condition TOP view on relay Monostable version 100 mW Latching 200 mW Latching -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 reset condition Bistable version, 1 coil reset condition 90 100 110 120 130 140 Ambient Temperature [C] All figures are given for coil without pre-energization, at ambient temperature +23C 108-98001 Rev. M AXICOMESignalERelays AXICOMESignalERelays Insulation standard* C* All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28 Relay 1 Pole Cha IM-C Relay 1 Pole Changeover / 1 Form C IM-C / SPDT standard high dielectric version version Initial dielectric strength between open contacts 1000Vrms 1600Vrms between contact and coil 1800Vrms 2200Vrms Contacts are shown in reset Dimensions in mm between adjacent contacts condition. Contact position might Initial surge withstand voltage change during transportation and must be reset before use. between open contacts 1500V 2200V between contact and coil 2500V 3000V All specifications subject to change.AllConsult Tyco Electronics latest specifications. 14 of 28 specifications subject tofor change. Consult Tyco Electronics for latest specifications. Initial insulation resistance 108-98001 Rev. M108-9 AXICOMESignalERelays AXICOMESignalERelays between insulated elements >109 >109 Dimensions IM-C Relay 1 Gull Pole Wings Changeover Relay 1 Pole Changeover / 1 Form C/ /1 Form SPDT C / SPDT Capacitance StandardIM-C Version Standard Version between open contacts max. 1pF THT version SMT version IMETHT IMETHT IMESMT between contact and coil max. 2pF IM-Cversion Dimension DimensionsDimensions IM-C Standard Standard GullEWings between adjacent contacts max. 2pF Gull wings Standard Dimensions in mm Dimensions IM-C THT Version THT Version mm inch 10.00.08 6.00.08 L 10.00EE0.08 0.393EE0.003 SMT VersionSMT Versio1 W 6.00EE0.08 0.236EE0.003 E Gull Wings E Gull0.222EE0.008 Wings H 5.65EE0.20 IMETHT IMESMT IMESMT T 3.2 0.125 Standard GullEWings Standard 0.4 GullEWingsN/A 5.080.1 mm mm inch T1inch N/A 6.00.08 mm inch mm inch 7.50EE0.30 10.00.08 10.00.08 10.00.08 6.00.08 0.295EE0.011 6.00.08 4.4 3.2 L 10.00EE0.08 0.393EE0.003 10.00EE0.08 0.393EE0.003 L 10.00EE0.08 0.393EE0.003 10.00EE0.08 0.393EE0.003 0.4 7.50.3 T2 5.08EE0.10 0.200EE0.004 5.08EE0.10W 0.200EE0.004 W 6.00EE0.08 0.236EE0.003 EE6.00EE0.08 0.236EE0.003 6.00EE0.08 0.236EE0.003 EE6.00EE0.08 0.236EE0.003 5.4 3.2H 4.4 H 5.080.1 5.65EE0.20 0.222EE0.008 EE5.65EE0.20 0.222EE0.008 5.65EE0.20 0.222EE0.008 EE5.65EE0.20 0.222EE0.008 D1 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 T 3.2 0.125 N/A N/A T 3.2 0.125 N/A N/A 0.45.080.1 0.4 0.087EE0.006 D2 2.20EE0.15 Coplanarity 0.1mm T1 N/A 7.50EE0.30 0.295EE0.011 2.20EE0.155.4 T1 N/A0.087EE0.006 N/A 7.50EE0.30 0.295EE0.011 4.4 3.2 4.4 7.50.3 3.2 0.4 7.50.3 0.4 5.08EE0.10 0.200EE0.004 5.08EE0.10 0.200EE0.004 T2 5.08EE0.10 T2 0.200EE0.004 5.08EE0.10 0.200EE0.004 Tw 0.40 5.4 5.4 0.015 0.4 3.2 5.080.1 4.4 5.080.1 D1 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 D1 3.20EE0.15 0.015 0.126EE0.006 3.20EE0.15 0.126EE0.006 Coplanarity 0.1mm 5.4 Coplanarity 0.1mm D2 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 D2 2.20EE0.15 N/A0.087EE0.006 2.20EE0.15 0.087EE0.006 S 0.75 0.029 N/A 7.50.3 7.50.3 Mounting Hole Layout 5.65-0.2 0.75 5.65-0.2 3.2 0.75 5.65-0.2 Data View Other onto the component side of the PCB (top view) 0.75 5.65-0.2 5.65-0.2 1.06/1.49 3.2 0.75 T1 N/A N/A 10.00.08 T2 5.08EE0.10 0.200EE0.004 3.2 5.080.1 4.4 D1 3.20EE0.15 0.126EE0.006 RF Data 5.4 D2 2.20EE0.15 0.087EE0.006 7.50.3 Cross talk at 100MHz/900MHz -37.0dB/-18.8dB Tw 0.40 0.015 3.2 4.4 Insertion loss at 100MHz/900MHz 0.03dB/0.33dB 5.4 S 0.75 0.029 0.4 Voltage standing wave ratio (VSWR) at 100MHz/900MHz Tw S 0.40 0.75 Tw S 0.40 0.015 0.75 0.029 0.015 0.4 0.015 0.4 0.015 Coplanarity 0.029 N/A 0.1mm N/A N/A N/A Coplanarity 0 Coplanarity 0.1mm PCB layout TOP view onLayout component side of PCB Solder Pad Layout Mounting Hole Solder Pad Layout Mounting Hole Layout Mounting Hole Layout S Solder Pad Layout View onto the the PCB (top view) View onto the the PCB (top View onto the component sidecomponent of the PCBside (topofview) View onto the component sidecomponent of the PCBside (topofview) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40C to +85C Thermal resistance <150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection IEC 60529 IP 67, immersion cleanable 2 SMT Version mm 2551-62-4) for dielectric inch strength mm 10.00.08 inch *this relay contains SF6 (Sulfur hexafluoride, CAS number: 6.00.08 10.00.08 6.00.08 0.393EE0.003 10.00EE0.08 0.393EE0.003 enhancement, SF6 is hermetically sealedL in relay10.00EE0.08 without leaks to air during normalTHT applicaVersion VersionTHT tion as recommended per the applicableWproduct6.00EE0.08 specification. It is clarified that the usage 0.236EE0.003 EE6.00EE0.08 0.236EE0.003 Standard Version Standard of SF6 in mini signal relay is not prohibited regulations. Please0.222EE0.008 contact TE local Version H by related 5.65EE0.20 EE5.65EE0.20 0.222EE0.008 IMETHT sales or field engineer for further information T and detailed 3.2 material declaration.0.125 N/A N/A 3.2 3.2 5.65-0.2 Dimensions IM-C View onto the component side the PCB (top view) View onto the component side ofof the PCB (top view) THT mounting holes SMT - solder pads Terminal Assignment Terminal Assignment 09-2017, Rev. 0917 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Relay - top view Relay - top view Datasheets and product specification Datasheets and product data is subject to the Non-Latching Type according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of Non-Latching Type only together with the `Definitions' not section. the energized `Definitions' section, available at not condition energized condition http://relays.te.com/definitions Datasheets, product data, `Definitions' sec- tion, application notes and all1specifications Type, Coil Latching Type, Latching 1 Coil are subject to change. reset condition reset condition V Tempera cooling Packing 100C Dimensions in Vapor Phase Soldering: Temperature/Time Profile AXICOM (Lead and Housing Peak Temperature) Signal Relays Time (s) AXICOMESignalERelays AXICOMESignalERelays IM - C Relay (Continued) IM Relay IM Relay Recommended Reflow Soldering Profile Processing Recommended soldering conditions Packing Packing Packing Tube for THT version 50 relays per tube, 1000 relays per box Temperature C Tube for THT version 50 relays per tube 1,000 relays per box Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Time (s) Tube fo Tub 50 relay 50re r 1,000 Infrared Soldering: temperature/ time profile (lead and housing peak temperature) Resistance to Soldering Heat - Reflow Profile 1,00 Resistance to soldering heat - Reflow profile Tape and reel for SMT version 1000 relays per reel, 1000 or 5000 relays per box Temperature C Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box AXICOMESignalERelays 108-98001 Rev. M IM Relay Reel Dimension Recommended Soldering Conditions Time (s) Vapor Phase Soldering: temperature/time profile (lead and housing peak temperature) Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020D 20-40sec 240C Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Reel Dimension Temperature C 1,00 1,00 Reel dimensions Full line: typical Dottedline: processlimits Reel Dimension Reel Dimension All specifications subject to change. Consult Tyco Electronics for latest specifications. 180C 130C 100C Tape an 1,000 re Tap 1,000 o 25 of 28 forced cooling All specifications subject to change. Consult Tyco Electronics for latest specifications. Time (s) Recommended Reflow Soldering Profile Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) All specifications subject to change. Consult Tyco Electronics for latest specifications. All specifications subject to change. Consult Tyco Electronics for latest specifications. Temperature C All specifications subject to change. Consult Tyco Electronics for latest specifications. 09-2017, Rev. 0917 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3 Signal Relays AXICOM IM - C Relay (Continued) Product code structure IM Typical product code C 03 G R Type IM Signal Relays IM Series IMC Contact arrangement C 1 form C, 1 CO Coil Coil code: please refer to coil versions table Performance type Blank Standard version Terminals T THT - standard Packing S Tube Product code Arrangement C High Dielectric Version G SMT - gull wing R Reel Perf. type Coil Coil type Terminals IMC01GR 1 form C, Standard 3VDC Monostable SMT gull wing IMC01TS 1 CO THT standard IMC02GR contact 4.5VDC SMT gull wing IMC02TS THT standard IMC03GR 5VDC SMT gull wing IMC03TS THT standard IMC06GR 12VDC SMT gull wing IMC06TS THT standard IMC07GR 24VDC SMT gull wing IMC07TS THT standard IMC02CGR High dielectric 4.5VDC SMT gull wing IMC06CGR 12VDC IMC06CTS THT standard IMC41CTS 3VDC Bistable 4 09-2017, Rev. 0917 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 1462042-1 1462042-4 1462042-2 1462042-5 1462042-8 1462042-7 1462042-3 1462042-6 1-1462042-1 1-1462042-2 1-1462042-0 1462042-9 1-1462042-4 1-1462042-3 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change.