SPECIFICATION CONTROL DRAWING Product Revision Product Name Ident. Code S03-01-R D S0301R S03-02-R D S0302R S03-03-R D S0303R S03-04-R D S0304R S03-05-R D S0305R Component Dimensions L1.75 oB oC min min (L0.070) 16.50 1.90 2.65 (0.650) (0.070) (0.105) 16.50 2.65 3.68 (0.650) (0.105) (0.145) 16.50 4.30 5.08 (0.650) (0.170) (0.200) 19.10 5.95 6.45 (0.750) (0.235) (0.255) 19.10 7.00 7.60 (0.750) (0.275) (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate Cable with Dimensions oE oF oD max min max 2.65 0.90 1.90 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.140) (0.055) (0.105) 5.08 2.15 4.30 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.60 4.30 7.00 (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin-plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult TE Connectivity/Raychem. 2. When installed per TE Connectivity /Raychem process standard RCPS-100-70, assemblies will meet those requirements of TE Connectivity /Raychem Specification RT-1404 and MIL-S-83519/2, which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SolderSleeve is a trademark of TE Connectivity. TITLE: TE Connectivity 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. Raychem DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: SOLDERSLEEVE DEVICES SHIELD TERMINATION WITH PRE-INSTALLED BRAID S03-01/-05-R ANGLES: N/A TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate ROUGHNESS IN the suitability of the product for their MICRON application. CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D982098 D030251 PROD. REV.: DOC. ISSUE: SEE TABLE SCALE: None Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 5 SIZE: DATE: 15-Apr-11 SHEET: A 1 of 1