885025 - TriQuint Semiconductor

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 1 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Applications

 General purpose RF filter

 Wireless infrastructure

 4G, Multi-standard

 Band 2 Uplink

 Repeaters

SMP-12, 3.00 x 3.00 x 1.22 mm

Pin Configuration - Single Ended

Pin No.

Label

2

Input

5

Output

1,3,4,6

Ground

Functional Block Diagram

4

2

3

16

5

Input Output

Gnd

Gnd Gnd

Gnd

Product Features

 Usable bandwidth 60 MHz

 High attenuation

 Excellent power handling

 Low Loss

 Single-ended operation

 No matching required for operation at 50Ω

 Small Size: 3.00 x 3.00 x 1.22 mm

 Ceramic Surface Mount Package (SMP)

 Hermetically sealed

 RoHS compliant, Pb-free

General Description

885025 is a general purpose Uplink filter for Band 2.

This filter was specifically designed in a 3x3mm

hermetic package for Base Station and Repeater

applications and is part of our wide portfolio of RF

filters in the same package.

Low insertion loss, coupled with high attenuation and

excellent power handling, makes this filter a natural

choice for our customers Uplink RF filtering needs and

other general purpose applications.

Ordering Information

Part No.

Description

885025

Product description

885025-EVB

Evaluation board description

Standard T/R size = 5000 units/reel

Pb

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 2 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Electrical Specifications (1)

Test conditions unless otherwise noted: (2) Temp = −40 °C to +85 °C

Parameter (3)

Conditions

Min

Typ (4)

Max

Units

Center Frequency

-

1880.0

-

MHz

Maximum Insertion Loss

1850 –1910 MHz

-

3.5

5.5

dB

Amplitude Variation (5)

1850 –1910 MHz

1850 –1910 MHz, over any 3.84 MHz span

-

1.9

1.5

4.5

2.8

dB p-p

Absolute Attenuation (6)

869 – 894 MHz

1574.42 –1576.42 MHz

1920 –1930 MHz

1930 –1990 MHz

3690 –3830 MHz

5540 –5740 MHz

7390 –7650 MHz

37

45

20

40

20

12

-

41

50

33

45

25

18

8

-

dB

Input VSWR

1850 –1910 MHz

-

1.7

2.4:1

-

Output VSWR

1850 –1910 MHz

-

1.7

2.4:1

-

Source Impedance (7)

single-ended

-

50

-



Load Impedance (7)

single-ended

-

50

-



Notes:

1. All specifications are based on the TriQuint schematic shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance

over temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing

tolerances

4. Typical values are based on average measurements at room temperature

5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency

points

6. Relative to zero dB

7. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter

Rating

Storage Temperature

−40 to +85 °C

Operable Temperature (1)

−40 to +85 °C

RF Input Power CW, +55 °C for 10K hours

+30 dBm

Notes:

1. Operation of this device outside the parameter ranges given

may cause permanent damage.

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 3 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Evaluation Board

Matching Schematics

960700

JJJYM

XX

1,3,4,6

25

50 50

 

Notes:

1. No impedance matching required

2. PCB: . Top, middle & bottom layers: 1 oz copper, Substrates: FR4 dielectric, .031” thick, Finish plating: Nickel: 3-8µm

thick, Gold: .03-.2µm thick, Hole plating: Copper min .0008µm thick

Bill of Material – 885025-EVB

Reference Des.

Value

Description

Manuf.

Part Number

U1

N/A

1880 MHz Baw Filter

TriQuint

885025

SMA

N/A

SMA connector

Radiall USA

Inc.

9602-1111-018

PCB

N/A

3 layer

Multiple

960700

PCB Mounting Pattern

.96

3.20 SQ

1.27

.38 .81

1.70

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. This drawing specifies the mounting pattern used on the TriQuint

evaluation board for this product. Some modification may be necessary

to suit end user assembly materials and processes.

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 4 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Performance Plots

Test conditions unless otherwise noted: Temp= +25°C

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 5 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Package Information, Marking and Dimensions

0.69

1.22 NOM.

1.32 MAX.

0.75

0.60

1.50

0.75

3.00

HT

code

Marking

Date code

JJJYM

logo

ID dot

TriQuint

Package Style: SMP-12A

Dimensions: 3.00 x 3.00 x 1.22 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

The date code consists of day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing site

code

Notes:

1. All dimensions shown are typical in millimeters

2. An asterisk (*) in front of the marking code indicates prototype.

Tape and Reel information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

3.25

Section A-A

1.75

Ø1.5

4.0 A

12.0

5.5

Ø1.5

4.0

2.0

3.25

1.4

0.21 A

Ø102 Ø20.2

Ø13.0 2.0 Direction of travel

Ø330

12.8

2.7 logo

ID dot TriQuint

885025

1880 MHz BAW Filter

Data Sheet: Rev B 03-06-2014

- 6 of 6 -

Disclaimer: Subject to change without notice

www.triquint.com

Product Compliance Information

ESD Sensitivity Ratings

Caution! ESD-Sensitive Device

ESD Rating: Class 3B

Value: Passes ≥ 8000 V

Test: Electrostatic Discharge Sensitivity Testing,

Human Body Model (HBM) - component level

Standard: ESDA/JEDEC JS-001-2012

ESD Rating: Class C

Value: Passes  800 V

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with both lead-free (260°C maximum

reflow temperature) and tin/lead (245°C maximum

reflow temperature) soldering processes.

Refer to Soldering Profile for recommended

guidelines.

RoHs Compliance

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain

Hazardous Substances in Electrical and Electronic

Equipment).

This product also has the following attributes:

 Lead Free

 Halogen Free (Chlorine, Bromine)

 Antimony Free

 TBBP-A (C15H12Br402) Free

 PFOS Free

 SVHC Free

MSL Rating

Not applicable. Hermetic package.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and

information about TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information

contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.

The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated

with such information is entirely with the user. All information contained herein is subject to change without notice.

Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The

information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any

patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or

anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-

sustaining applications, or other applications where a failure would reasonably be expected to cause severe

personal injury or death.