885025 1880 MHz BAW Filter Applications General purpose RF filter Wireless infrastructure 4G, Multi-standard Band 2 Uplink Repeaters SMP-12, 3.00 x 3.00 x 1.22 mm Product Features Functional Block Diagram Usable bandwidth 60 MHz High attenuation Excellent power handling Low Loss Single-ended operation No matching required for operation at 50 Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically sealed RoHS compliant, Pb-free Pb General Description Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pin Configuration - Single Ended 885025 is a general purpose Uplink filter for Band 2. This filter was specifically designed in a 3x3mm hermetic package for Base Station and Repeater applications and is part of our wide portfolio of RF filters in the same package. Pin No. Label 2 Input 5 Output 1,3,4,6 Ground Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural choice for our customers Uplink RF filtering needs and other general purpose applications. Ordering Information Part No. Description 885025 885025-EVB Product description Evaluation board description Standard T/R size = 5000 units/reel Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 1 of 6 - Disclaimer: Subject to change without notice www.triquint.com 885025 1880 MHz BAW Filter Absolute Maximum Ratings Parameter Rating Storage Temperature (1) Operable Temperature RF Input Power CW, +55 C for 10K hours -40 to +85 C -40 to +85 C +30 dBm Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. Electrical Specifications (1) Test conditions unless otherwise noted: Parameter (3) Temp = -40 C to +85 C Conditions Center Frequency Maximum Insertion Loss Amplitude Variation (2) (5) Absolute Attenuation (6) Input VSWR Output VSWR (7) Source Impedance (7) Load Impedance Min 1850 -1910 MHz 1850 -1910 MHz 1850 -1910 MHz, over any 3.84 MHz span 869 - 894 MHz 1574.42 -1576.42 MHz 1920 -1930 MHz 1930 -1990 MHz 3690 -3830 MHz 5540 -5740 MHz 7390 -7650 MHz 1850 -1910 MHz 1850 -1910 MHz single-ended single-ended Typ (4) Max Units 5.5 4.5 2.8 - MHz dB 37 45 20 40 20 12 - 1880.0 3.5 1.9 1.5 41 50 33 45 25 18 8 - 1.7 1.7 50 50 2.4:1 2.4:1 - - dB p-p dB - Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 6. Relative to zero dB 7. This is the optimum impedance in order to achieve the performance shown Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 2 of 6 - Disclaimer: Subject to change without notice www.triquint.com 885025 1880 MHz BAW Filter Evaluation Board Matching Schematics 2 XX JJJYM 50 5 1,3,4,6 50 960700 Notes: 1. No impedance matching required 2. PCB: . Top, middle & bottom layers: 1 oz copper, Substrates: FR4 dielectric, .031" thick, Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick, Hole plating: Copper min .0008m thick Bill of Material - 885025-EVB Reference Des. Value U1 SMA PCB N/A N/A N/A Description Manuf. 1880 MHz Baw Filter SMA connector 3 layer Part Number TriQuint 885025 Radiall USA 9602-1111-018 Inc. Multiple 960700 PCB Mounting Pattern 3.20 SQ Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. .96 1.70 1.27 .81 .38 Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 3 of 6 - Disclaimer: Subject to change without notice www.triquint.com 885025 1880 MHz BAW Filter Performance Plots Test conditions unless otherwise noted: Temp= +25C Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 4 of 6 - Disclaimer: Subject to change without notice www.triquint.com 885025 1880 MHz BAW Filter Package Information, Marking and Dimensions Marking code TriQuint logo HT ID dot Date code JJJYM 1.22 NOM. 1.32 MAX. 0.69 Package Style: SMP-12A Dimensions: 3.00 x 3.00 x 1.22 mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm The date code consists of day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.00 0.75 1.50 3.00 0.75 Notes: 1. All dimensions shown are typical in millimeters 2. An asterisk (*) in front of the marking code indicates prototype. 0.60 Tape and Reel information Standard T/R size = 5000 units/reel. All dimensions are in millimeters 2.7 12.8 ID dot O330 TriQuint logo Section A-A 4.0 0.21 2.0 O1.5 A 1.75 5.5 O102 O20.2 O13.0 2.0 Direction of travel 12.0 3.25 1.4 3.25 4.0 A O1.5 Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 5 of 6 - Disclaimer: Subject to change without notice www.triquint.com 885025 1880 MHz BAW Filter Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260C maximum reflow temperature) and tin/lead (245C maximum reflow temperature) soldering processes. Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: Class 3B Value: Passes 8000 V Test: Electrostatic Discharge Sensitivity Testing, RoHs Compliance Human Body Model (HBM) - component level This part is compliant with EU 2002/95/EC RoHS Standard: ESDA/JEDEC JS-001-2012 directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic ESD Rating: Class C Equipment). Value: Passes 800 V Test: Machine Model (MM) This product also has the following attributes: Standard: JEDEC Standard JESD22-A115 Lead Free Halogen Free (Chlorine, Bromine) MSL Rating Antimony Free TBBP-A (C15H12Br402) Free Not applicable. Hermetic package. PFOS Free SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev B 03-06-2014 (c) 2014 TriQuint - 6 of 6 - Disclaimer: Subject to change without notice www.triquint.com