222239508153 - BC Components

1999 Apr 29 238

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

MKPS RADIAL EPOXY LACQUERED TYPE PITCH 10 mm

Fig.1 Simplified outlines.

handbook, full pagewidth

CBA874

FEATURES

•Low-inductive wound cell of

metallized (PPS) film

•Lacquered with epoxy resin

•Radial leads of solder-coated wire.

APPLICATIONS

•Automotive electronics

•High temperature

•High frequency

•High stability

•Where high reliability is required

•Stable filters, oscillators and timers.

DETAIL SPECIFICATION

For more detailed data and test

requirements see

“Type detail

specification HQN-000-03/001”

QUICK REFERENCE DATA

DESCRIPTION VALUE

Capacitance range 0.01 to 0.47 µF

Capacitance tolerance ±10%; ±5%

Rated (DC) voltage 63 V

Climatic category 55/125/56

Rated temperature 125 °C

Performance grade grade 1 (long life)

Maximum application temperature 140 °C

1999 Apr 29 239

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

COMPOSITION OF CATALOGUE NUMBER

TYPE AND PITCHES

395 10.0 mm

TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V

395 loose in box lead length 3.5 mm ±10% 05

±5% 06

lead length 19.5 mm ±10% 08

±5% 09

taped on reel H = 16.0 mm; P0= 12.7 mm ±10% 02

±5% 03

MULTIPLIER

(nF)

10 4

CAPACITANCE

(numerically)

Example:

104 = 10 ×10 = 100 nF

2222 395 XX XX X

1999 Apr 29 240

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

MKPS 395 GENERAL DATA PITCH 10 mm

Speciﬁc reference data for the 63 V DC capacitors

Available 63 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height: for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

0.01 µF≤C≤0.47 µF≤20 ×10−4≤25 ×10−4≤45 ×10−4

Rated voltage pulse slope (dU/dt)R at 63 V (DC) 200 V/µs

R between leads, at 50 V; 1 minute >10000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute

Withstanding (DC) voltage between leads and case 200 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=3.5 ±0.5 mm ±10% 2222 395 05... preferred

±5% 2222 395 06... on request

lt=19.5 ±4.0 mm ±10% 2222 395 08... on request

±5% 2222 395 09... on request

Taped on reel H =16.0 mm; note 2 ±10% 2222 395 02... on request

±5% 2222 395 03... on request

Fig.3 Outline.

handbook, full pagewidth

seating plane(1)

CBA100

(2)

∅dt

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°

1999 Apr 29 241

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

URdc =63 V; URac =40 V loose

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=3.5 ±0.5 mm

C-tol =±10%

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 ±0.5 mm

0.01

4.0 ×13.0 ×12.5 0.40

2222 395 05103

0.012 2222 395 05123

0.015 2222 395 05153

0.018 2222 395 05183

0.022 2222 395 05223

0.027 2222 395 05273

0.033 2222 395 05333

0.039 2222 395 05393

0.047 2222 395 05473

0.056 2222 395 05563

0.068 2222 395 05683

0.082 2222 395 05823

0.1 2222 395 05104

0.12 2222 395 05124

0.15 2222 395 05154

0.18 2222 395 05184

0.22 2222 395 05224

0.27 2222 395 05274

0.33 4.5 ×14.0 ×12.5 0.45 2222 395 05334

0.39 2222 395 05394

0.47 5.0 ×14.0 ×12.5 0.55 2222 395 05474

1999 Apr 29 242

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

CONSTRUCTION

Description

•Low-inductive wound cell of metallized PPS film

•Protected by a hard, water repellent, solvent resistant

epoxy lacquer

•Radial leads, solder coated.

Mounting

NORMAL USE

The capacitors are designed for mounting on

printed-circuit boards. The capacitors packed in bandoliers

are designed for mounting on printed-circuit boards by

automatic insertion machines.

For detailed tape specifications refer to this handbook,

chapter

“Packaging information”

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION

AND SHOCK

In order to withstand vibration and shock tests, it must be

ensured that the underside of the crimps are in good

contact with the printed-circuit board.

Temperature

•Storage temperature: Tstg =−25 to +40 °C with RH

maximum 80% without condensation.

Fig.4 Construction.

handbook, halfpage

CBA397

metallized polyphenylenesulfide film

metal spray layer

connecting wire

RATINGS AND CHARACTERISTICS REFERENCE

CONDITIONS

Unless otherwise specified, all electrical values apply to an

ambient free air temperature of 23 ±1°C, an atmospheric

pressure of 86 to 106 kPa and a relative humidity of

50 ±2%.

For reference testing, a conditioning period shall be

applied of 96 ±4 hours by heating the products in a

circulating air oven at the rated temperature and a relative

humidity not exceeding 20%.

1999 Apr 29 243

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

CHARACTERISTICS

Capacitance

Fig.5 Capacitance change as a function of frequency: typical curve.

handbook, full pagewidth

CBA183

−3

102103104105

−2

−1

f (Hz)

∆C

(%)

Fig.6 Capacitance change at 1 kHz as a function of ambient free air temperature: typical curve.

handbook, full pagewidth

125

−3−50 −25 75

CBA939

−1

−2

250 50 100

max.

min.

typical

Tamb (°C)

∆C

(%)

1999 Apr 29 244

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Impedance

Fig.7 Impedance as a function of frequency: typical curves.

handbook, full pagewidth

CBA399

105106107108

102

10−2

10−1

f (Hz)

Impedance

(Ω)

63 V; 220 nF

MKPS 395

1999 Apr 29 245

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Maximum RMS voltage (sinewave) as a function of frequency for Tamb ≤125 °C

Maximum RMS current (sinewave) as a function of frequency

The maximum RMS current is defined by .

Uac is the maximum AC voltage depending on the ambient temperature in Fig.8.

Fig.8 AC voltage (RMS value) as a function of frequency at Tamb ≤125 °C for URdc =63 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA400

102103104105106

102

220 nF

MKPS 395

Iac ωCU

××=

1999 Apr 29 246

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Tangent of loss angle

Fig.9 Tangent of loss angle as a function of frequency: typical curve.

handbook, full pagewidth

CBA189

102103104105

0.1

dissipation

factor

(× 10−4)

f (Hz)

Fig.10 Tangent of loss angle as a function of ambient temperature: typical curve.

handbook, full pagewidth

125

0−50 −25 75

CBA190

250 50 100 Tamb (°C)

dissipation

factor

(× 10−4)

1999 Apr 29 247

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Insulation resistance

Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)

Fig.11 RC product as a function of ambient free air temperature: typical curve.

handbook, full pagewidth

(s)

Tamb (°C)

−60 0 120

105

104

103

102

CBA191

Fig.12 Maximum allowed component temperature rise as a function of the ambient temperature.

handbook, full pagewidth

CBA868

100

−60 −20 60

20 140−40 0 8040 120

∆T

(°C)

Tamb (°C)

1999 Apr 29 248

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C

Table 1 Heat conductivity

bmax

(mm) G (mW/°C)

4.0 4.0

4.5 4.5

5.0 5.0

Power dissipation and maximum component

temperature rise

The power dissipation must be limited in order not to

exceed the maximum allowed component temperature

rise as a function of the free air ambient temperature.

Power dissipation can be calculated in accordance with

chapter

“Introduction”

, section

“Maximum power

dissipation”

The component temperature rise (∆T) can be measured

(see section “Measuring the component temperature” for

more details) or calculated by :

•∆T=component temperature rise (°C).

•P=power dissipation of the component (mW).

•G=heat conductivity of the component (mW/°C).

Measuring the component temperature

A thermocouple must be attached to the capacitor body;

see Fig.13.

∆TPG⁄=

The temperature is measured in unloaded (Tamb) and

maximum loaded condition (Tc).

The temperature rise is given by .

To avoid radiation or convection, the capacitor should be

tested in a wind-free box.

Fig.13 Mounting the thermocouple.

handbook, halfpage

thermocouple

CBA771

∆TT

amb

–=

1999 Apr 29 249

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

Application note and limiting conditions

To select the capacitor for a certain application, the following conditions must be checked:

1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).

2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.

3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and

without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied

by URdc and divided by the applied voltage.

For all other pulses following equation must be fulfilled:

T is the pulse duration.

4. The maximum component surface temperature rise must be lower than the limits in Fig.12.

5. The maximum component surface temperature must be lower than 140 °C.

2dU

--------





∫dt×× URdc dU

--------





rated

×<

1999 Apr 29 250

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

MARKING

Product marking

The capacitors are marked on the top (see Fig.14) with the

following information:

1. Product type: PPS

2. Capacitance code in accordance with

“IEC 60062”

p=pF; n =nF; µ=µF

3. Tolerance on rated capacitance: M =±20%;

K=±10%; J =±5%.

4. Rated (DC) voltage (e.g. 63 V). Fig.14 Example of marking.

handbook, halfpage

PPS 220n K 63

CBA402

Package marking

The package containing the capacitors is marked as shown in Fig.15.

handbook, full pagewidth

CCB840

10.

Fig.15 Barcode label.

Barcode label marking

LINE MARKING EXPLANATION

1 Manufacturer’s name

2 Country of origin

3 Sub-family

4 Type description

5 Capacitance value, tolerance, voltage and

climatic category (

“IEC 60068-1”

)

6−

7 Preference origin code: A

Country of origin in code: 170 (Belgium)

Responsible production centre: HQ

WO: work order

8 Product type description

9 Quantity and production period, year and

week code

10 Product code (12NC)

Please note:

In due time BC COMPONENTS

will replace PHILIPS COMPONENTS

1999 Apr 29 251

BC Components Product speciﬁcation

Metallized PPS ﬁlm capacitor MKPS 395

QUICK REFERENCE TEST REQUIREMENTS (see note 1)

Notes

1. For detail information: see

“Type detail specification HQN-000-03/001”

2. Measuring frequency 100 kHz.

TEST PROCEDURE

(quick reference) REQUIREMENTS

Robustness of leads

Tensile:

“IEC 60068-2-21”

load 10 N; 10 s no visible damage

legible marking

|∆C/C| ≤3%

∆tan δ≤50 ×10−4; note 2

Bending:

“IEC 60068-2-21”

load 5 N; 4 ×90°

Resistance to soldering heat:

“IEC 60068-2-20

”solder bath: 260 °C; 10 s

Climatic sequence

Dry heat:

“IEC 60068-2-2

”16 hours; 125 °C

|∆C/C| ≤5%

∆tan δ≤60 ×10−4; note 2

Rins ≥50% of speciﬁed value

Damp heat, cyclic, test Db,

ﬁrst cycle:

“IEC 60068-2-30

”

Cold:

“IEC 60068-2-1

”2 hours; −55 °C

Damp heat, cyclic, test Db,

remaining cycles:

“IEC 60068-2-30

”

Other applicable tests

Damp heat, steady state:

“IEC 60068-2-3

”56 days; 40 °C; 90 to 95% RH |∆C/C| ≤3%

∆tan δ≤50 ×10−4; note 2

Rins ≥50% of speciﬁed value

Endurance (DC):

“IEC 60384-2

”2000 hours;

1.25 ×URdc; 125 °C|∆C/C| ≤5%

∆tan δ≤50 ×10−4; note 2

Rins ≥50% of speciﬁed value