A66-1 / SMA66-1 / CA66-1 Cascadable Amplifier 10 to 1000 MHz Rev. V4 Features Product Image 27.5 dB High Gain, 2 Stages >3.0 Noise Figure 15 dBm Output Power 5 - 15 V Bias Range Description The A66-1 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for consistent performance and high reliability. This 2 stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network insures temperature-stable performance. Ordering Information Both TO-8 and surface mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Part Number Package A66-1 TO-8 SMA66-1 Surface Mount CA66-11 SMA Connectorized 1. The connectorized version is not RoHS compliant. Electrical Specifications2: Z0 = 50 , VCC = 15 VDC 1 Parameter Units Frequency Typical Guaranteed 25C 0 to 50C -54 to +85C2 GHz 5 - 1200 10 - 1000 10 - 1000 Small Signal Gain (min.) dB 27.5 26.0 25.5 Gain Flatness (max.) dB 0.4 0.7 1.0 Reverse Isolation dB 33 -- -- Noise Figure (max.) dB 2.9 3.5 4.0 Power Output @ 1 dB comp. (min.) dBm 15.0 14.5 14.0 IP3 dBm 28 -- -- IP2 dBm 38 -- -- Second Order Harmonic IP dBm 43 -- -- VSWR Input / Output (max.) Ratio 1.5:1 / 1.5:1 1.8:1 / 1.8:1 2.0:1 / 2.0:1 DC Current @ 15 Volts (max.) mA 66 69 72 2. Over temperature performance limits for part number CA1212, guaranteed from 0 oC to +50oC only. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support A66-1 / SMA66-1 / CA66-1 Cascadable Amplifier 10 to 1000 MHz Rev. V4 Absolute Maximum Ratings3,4 Parameter Absolute Maximum Storage Temperature -62C to +125C Case Temperature +125C DC Voltage 17 V Continuous Input Power 6 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 sec max.) 0.5 W "S" Series Burn-In Temperature (case) +125C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. Thermal Data: VCC = 15 VDC Parameter Rating Thermal Resistance JC 145C/W Transistor Power Dissipation PD 0.419 W Junction Temperature Rise Above Case TJC 61C 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support A66-1 / SMA66-1 / CA66-1 Cascadable Amplifier 10 to 1000 MHz Rev. V4 Typical Performance Curves at +25C 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support A66-1 / SMA66-1 / CA66-1 Cascadable Amplifier 10 to 1000 MHz Rev. V4 Outline Drawings5 TO-8 WEIGHT: 1 gram (0.04 oz.) max. Surface Mount WEIGHT: 1 gram (0.04 oz.) max. SMA Connectorized WEIGHT: 19 grams (0.67 oz.) max. 4 5. Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support A66-1 / SMA66-1 / CA66-1 Cascadable Amplifier 10 to 1000 MHz Rev. V4 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support