DS04-23506-1E m@ DESCRIPTION The Fujitsu MB54502 includes two independent amplifiers which are applications such as handy phones and car phones. Both of the amplifie well as the low noise performance. Using Fujitsus advanced tech respectively (total 4mA typ.). bile telecommunication slow current consumption as (02 achieves an Icc of 2mA typ. m@ FEATURES * Supply voltage 3V (typ.) * Current consumption 2mA (typ.) * Input frequency 1.1GHz (max.).< * Gain 14dB (typ.) * Noise figure 2.20B (typ.) * 1dB compression point * Frequency tolerance * Input return loss * Output return loss *1: Measured by the cir (fin = 820MHz) * 16-pin Plastic Shrink ne Package (Suffix: -PFV) m@ PACKAGE 16-pin Plastic SSOP (FPT-16P-MO05)MB54502 m@ PIN ASSIGNMENT (TOP VIEW) Rext1 1 16 RFin1 Lexti 2 15 GND RFout1 3 14 Veci GND 4 13 N.C. N.C. 5 12 Vec2 RFout2 6 V1 GND Lext2 7 10 GND Rext2 8 9 RFin2 (FPT-16P-M05) m@ ABSOLUTE MAXIMUM RATINGS Parameters Symbol Value Unit Supply Voltage Vec -0.5 to 7.0 Vv Output Voltage Vo 0.5 to Vec + 0.5 Vv Output Current lo 0 to 10 mA Storage Temperature Tsta 55 to +125 C Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.MB54502 @ EQUIVALENT CIRCUIT Vec1 @ Vec2 G@a RFout1 RFout2 Main ) Lext1 Main ) Lext2 Bias RFin4 Bias RFin2 Circuit Circuit () Rext1 () Rext2 Amplifier) > Amplitier2. + m@ PIN DESCRIPTION Pin No. | Pin Name Description Pin No. | Pin Name Description 1 Rext1 Emitter (amplifier 1) 9g RFin2 Input (amplifier 2) 2 Lextt Load connection (amplifier1) 10 GND Ground 3 RFout1 Output (amplifier 1) 11 GND Ground 4 GND Ground 12 Vec2 Power supply (amplifier 2) 5 NC No connection 13 NC No connection 6 RFout2 | Output (amplifier 2) 14 Vect Power supply (amplifier 1) 7 Lext2 Load connection (amplifier 2) 15 GND Ground 8 Rext2 Emitter (amplifier 2) 16 RFin1 Input (amplifier 1)MB54502 m@ RECOMMENDED OPERATING CONDITIONS Value Parameter Symbol Unit Min. Typ. Max. Supply Voltage Veo 27 3.0 5.5 Vv Input Voltage Vi GND _ Vec Vv Operating Temperature Ta 40 _ +85 C Notes: To protect against damage by electrostatic discharge, note the following handling precautions: Store and transport devices in conductive containers. Use properly grounded workstations, tools, and equipment. Turn off power before inserting or removing this device into or from a socket. Protect leads with conductive sheet, when transporting a board mounted device.m@ ELECTRICAL CHARACTERISTICS MB54502 (Vec1 = +3.0V, Vec2 = 0.0V, Ta = 25C or Vec1 = 0.0V, Vec2 = +3.0V, Ta = 25C) Target Value Parameter Symbol Conditions Unit Min. Typ. Max. Supply Voltage Voc 2.7 3.0 5.5 Vv Supply Current lec 1 amplifier active 2.0 mA Operating Frequency fin 820 1100 MHz Gain Gain 14 dB Noise Figure NF 2.2 dB 1dB Compression Point Pia Output 6 dBm Amplitude Tolerance - 820 + 50MHz 2.5 dB Input Return Loss RLin 8 dB Output Return Loss RLout 8 dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page.MB54502 m@ MEASUREMENT CIRCUIT (EXAMPLE) 502 Measuring apparatus 502 Measuring apparatus 8.2n 8p Rext1 Lext1 RFout1 GND N.C. RFout2 Lext2 Rext2 RFin1 GND Vec1 N.C. Vec2 GND GND RFin2 820MHz 16 33p +| 10n 15 LH 14 100p 1000p ff Veet =3v hh 13 12 100p 1000p TF _* V 002 = 3V 4 14 H 10 Lb 820MHz 33p +| 10nlm PACKAGE DIMENSIONS MB54502 16-pin Plastic SSOP (CASE No.: FPT-16P-M05) +0.10 (0.22 005) *: This dimension does not include resin protrusion. 1991 FUJITSU LIMITED F16012S-2C 0.49 +.008 -.004 _ * 197 + .004 (1.25 *045) (5.00 + 0.10) | | .004 (0.10) 4 i 252 + 008 INDEX (6.40 + *173 + 004 213 (5.40) NOM (4.40 + { | "7 Ls, \ i y i t ov cos: 047 | aos +904 Ll 0 088 15 298 (0.654012) | | " Details of "A" part | I | I .004 + .004 (STAND OFF \ (0.10 + 0.10) HEIGHT) | Tee eT | I | I 179 (4.55) | I REF | .020 + .008 I 0 to 10 (0.504 0.20) I \Y I (MOUNTING HEIGHT) Dimensions in inches (millimeters)MB54502 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3753 Fax: (044) 754-3332 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED No. 51 Bras Basah Road, Plaza By The Park, #06-04 to #06-07 Singapore 189554 Tel: 336-1600 Fax: 336-1609 F9505 FUJITSU LIMITED Printed in Japan All Rights Reserved. Circuit diagrams utilizing Fujitsu products are included as a means of illustrating typical semiconductor applications. Com- plete information sufficient for construction purposes is not nec- essarily given. The information contained in this document has been carefully checked and is believed to be reliable. However, Fujitsu as- sumes no responsibility for inaccuracies. The information contained in this document does not convey any license under the copyrights, patent rights or trademarks claimed and owned by Fujitsu. Fujitsu reserves the right to change products or specifications without notice. No part of this publication may be copied or reproduced in any form or by any means, or transferred to any third party without prior written consent of Fujitsu. The information contained in this document is not intended for use with equipments which require extremely high reliability such as aerospace equipments, undersea repeaters, nuclear con- trol systems or medical equipments for life support.